How to restart standard settings in win 10. Reset a phone that is not responding
operating room Windows system 10, like any other OS, may not work correctly or malfunction. When the number of errors exceeds the permissible norm and there is no strength or patience to deal with the problems, there is a desire to reset the settings in Windows 10 to factory settings. This is quite simple to do, since there are many ways for this purpose. However, we note one nuance: some assemblies, such as 10240, 10586 and some others, may not load at all after a rollback. Therefore, if you are the owner of these assemblies, you will perform all actions at your own peril and risk.
Restore Windows 10 to factory state from a working system
If you want to reset all settings on Windows 10 to the factory state and your OS is fully functional (boots, has access to the network, settings), then the rollback steps will be as follows:
- Click “Start”, “Settings”, select the “Updates and Security” section.
- Click on the “Start” button in the “Return the computer to its original state” item.
- A small window will appear. Click “Press”.
- If the system asks you to select an action, click on the one that is most suitable. We recommend “Keep personal files.”
- The process of saving information may take several minutes. In the next window, we look at the warning that after the rollback all settings will be changed. If you agree with the actions, click “Reset”.
- The entire reset process may take 2 to 4 hours. You should not touch the computer at this time, turn it off or restart it.
How to reset Windows 10 if PC won't boot?
If the PC does not boot, then the way to reset all settings on Windows 10 will be as follows:
- We connect to the PC a media with Windows 10 installation files of the same version and bit depth as installed. Select "Troubleshooting".
- At the next stage, click “Return the computer to its original state.” This also applies to laptops.
- In the next window, as in the previous method, we choose to save or delete personal files.
- Afterwards we select operating system Windows Click “Reset your computer to its original state.”
- We wait again until the files are installed and the system boots in normal mode.
IMPORTANT! If to download from installation media you changed the settings in the BIOS, change them back.
Safely restore Windows 10 to factory settings
At the end free update in August 2016, Windows 10 received a useful tool – Refresh Windows Tool. With it, you can perform a clean installation of the OS or rollback while preserving personal files. In order to use it, you should do the following:
- Go to the “Update and Security”, “Recovery” settings section and move the slider down the entire section. Click on the link “Find out how to start over with clean install Windows".
- A window will open in the browser (you need to have IE installed or Microsoft Edge). Download Refresh Windows Tool.
- Once you launch the application, you will need to accept the license agreement. Then we choose what actions to take: save personal data or delete everything.
- The computer will be busy installing clean files. There is no need to do anything until the rollback is complete.
- After the system boots in normal mode, press “Win + R” and enter the “cleanmgr” command in the “Run” line.
- A new window will open. In the “Disk Cleanup” tab, check necessary files and click “OK”. The system disk will be cleared of unnecessary data.
- Now the system can be used without fear of new errors.
If your Windows 10 operating system begins to malfunction and is terribly slow, then one of the ways to fix the situation is to return the operating system to its original position. That is, this is actually the same system recovery, only without any images and control points. You just get a bare OS, but a working one.
If you follow full reset Windows 10, you will not only lose all programs installed on it and settings made, but you will also lose all your personal files (documents, photos, etc.) But do not be alarmed, you can also choose a non-full reset, when only settings and programs are deleted , but personal files remain.
If you notice that the system has started to slow down after installing drivers or downloading a certain program, then it is not necessary to reset Windows to factory settings, you can try.
Resetting settings can also be performed both when the operating system is running, and if it does not boot at all. Well, now let's talk about everything in order.
If Windows 10 starts
Left-click on the “Start” button and select “Options” from the drop-down menu:
Then click on the tab "Recovery". Reading the inscription "Return the computer to its original state" and click on the “Start” button:
Now choose how you want to return the system with or without saving personal files
If it doesn't start at all
In this case, you will have to boot from the installation flash drive or disk. That is, this process will be very similar to starting the installation of Windows 10. Therefore, follow the link and read how to boot from the installation flash drive, how to create it, and also how to change the boot priority in the BIOS.
After you boot from the flash drive, you will see the following window in front of you, in which you will need to select “System Restore” in the lower left corner of the screen.
After that, click on the “Diagnostics” button:
After which you make the already familiar choice between a complete system rollback or saving personal files:
That's basically it, we were able to return the Windows 10 operating system to factory settings in several ways.
And also watch a video on the topic:
Rate this article:
If for any reason your computer becomes slow, glitches, or stops booting altogether, resetting Windows 10 to factory settings may help. This option allows you to automatically (sometimes semi-automatically) restore the system without losing important files. We will look at all the methods for such a reset and point out possible problems and errors.
When might you need to reset Windows 10 to factory settings?
Resetting the OS may be necessary in the following cases:
In previous versions of Windows (7 and 8), resetting the system was much more difficult than in the new 10. Now you can try to solve virtually any problem with a reset. It definitely won’t do any harm, because as a result only programs will be removed, your personal files will remain intact.
How to reset Windows 10 to factory settings
There are several ways to reset Windows 10 to factory settings. We will look at each of them in order of complexity of operations. If the next reset method did not help solve the problem, or it failed, try the next one.
Quick system rollback
If old Windows version(8.1 or older) was recently updated to 10, which means it is possible to roll back to the previous OS. The user is given a 30-day period to “test” Windows 10, after which the rollback files are deleted (we’ll look at how to prevent this below). To return to your previous version of Windows, do the following:
By default, the OS will delete recovery files after a month using Windows 10. However, their removal can be prevented. To do this, simply rename the recovery folders or reset them to a USB flash drive/ HDD:
Please note that you cannot use someone else's reset folders this way. They contain unique information about the system version and product key.
Video: how to roll back from Windows 10 to a previous version of the system
Resetting the system through the Windows 10 interface
If the OS does not stop loading, you can reset it directly in the Windows interface:
- Go to Settings.
- Go to Update/Security, select Recovery.
Click on the "Start" button
- Click on “Get Started” in the “Restore PC to its original state” option.
- Windows will offer to save the user's personal files or delete them. Select the appropriate option.
Specify what to do with the user's personal files
- If you choose to delete, the system will also offer to completely format the hard drive. This will lead to the removal of absolutely all files from the computer.
- Click the Reset button when the system indicates everything is ready to reset.
Click "Reset" to begin restoring the system to factory settings
During the reset process, the computer will restart several times. If any errors appear at any stage, move on to the next option.
Video: how to reset Windows 10 to factory settings via the OS interface
Using the Refresh Windows Tool
Microsoft is aware that a standard system reset may not always work. Therefore, in 2016, a utility was released that allows you to reset the system if standard way didn't work. To reset the system using the Refresh Windows Tool:
- Open the Recovery tab through Windows Settings.
- Find the link "Learn how to start again..."
- The Microsoft official website page will open in your default browser. Read the information provided and click “Download Tool Now.”
Read information about the utility and download it
- Launch the downloaded program.
- Follow the instructions.
Choose what to do with the user's personal files and click "Get Started"
- The automatic reset process will begin, which may take quite a long time. As a result, you will get a “clean” system.
Recovery data can take up to 20 GB of free space, which can be used for other purposes.
Reset Windows 10 if the system won't start
If due to some problems you are unable to log in to perform an automatic reset, please use the methods below.
Resetting the laptop to factory settings
Users of laptops from any manufacturer can perform a full system reset through the BIOS. This feature is built-in by default on all laptops. However, it will only work if you have a licensed version of Windows 10 installed.
Before you start resetting your laptop, disable the option " Quick start" To do this, enter the BIOS (by pressing the appropriate key for your device when you turn on the computer, usually F2 or Del) and find the Boot Booster option in the Boot section. Set it to Disabled and restart your computer, saving the settings.
Disable the Boot Booster option through the BIOS menu
Depending on your laptop model, press the following keyboard shortcuts when restarting:
- for ASUS models - F9;
- for HP - F11;
- for Acer - Alt + F10;
- for Samsung - F4.
This action will open the reset program. Follow the instructions: eventually all settings will be automatically reset. Data from drive C will be completely deleted.
By pressing the F4 key during reboot Samsung laptop, you can call the reset program
Video: how to reset an Acer laptop
Reset Windows 10 using a flash drive/disk
You can reset the system using a flash drive/recovery disk (how to create one on another work computer with the same OS is described below):
- Go to the BIOS and select the desired boot option (from a flash drive or disk).
Select your recovery flash drive from the BIOS boot menu
- After rebooting, the recovery program will open. Enter "Troubleshooting".
Click on "Troubleshooting" when the recovery program asks you to choose an action
- Select "Return to original state".
Click on "Reset your computer to its original state"
After this, the system will be reset to its original form. If you choose to keep your personal files, they will be in the Windows.old folder.
Creating a reset disk on a flash drive
To create a reset disk on a flash drive, do the following:
- Log in to the Control Panel. Enable showing icons rather than categories. Find the "Recovery" option.
Click on "Recovery" in "Control Panel"
- Select "Create a recovery disk."
Click on "Create a recovery drive"
- In the window that opens, you can select the backup option. Then about 8 GB of memory on the flash drive will be occupied, but restoring the system will be much easier and faster.
Make a backup system files to speed up the system recovery process in the future
- Select the flash drive on which the recovery disk will be created. It will be automatically formatted.
Wait for the process to complete.
Now the flash drive can be used to reset the Windows 10 system.
note that free space on a flash drive can be used for own needs. This will not harm the recovery program.
Video: how to create a Windows 10 recovery image on a flash drive and restore the system from the image
Creating a reset disk to CD/DVD
Before proceeding directly to the reset, let's consider creating a recovery disk on a CD/DVD:
- Open "Control Panel" and go to " Backup and restoration."
Click on the “Create a system repair disk” button
- Select the drive with the inserted disc in the window that opens and click “Create disc.”
Click "Create Disk"
Now you can use this disk to reset Windows settings 10.
Video: How to create a Windows 10 recovery disc without using additional media
Possible problems with resetting Windows 10
Even though the Windows 10 reset procedure looks quite simple, there is a possibility of errors. Let's look at the most common of them:
- The problem of returning to its original state. If during the system reset process the message “Reset Problem” was displayed on the screen, the recovery files were most likely damaged. In this case, you can try to start the reset again, since the error may be random. If this does not help, you need to reinstall Windows. Please note that even if you reinstall the system, you can keep your personal files.
The error "There was a problem resetting your PC" occurs due to damaged recovery files
Need a recovery disc. If the system displays a message like this during the reset process, it may be missing some recovery files or libraries. Insert the disk/flash drive with the recovery program or use the Refresh Windows Tool utility to solve this problem.
Insert a recovery disc or installation media to resolve the error
If other problems arise during the Windows 10 reset process, proceed to the next method described above. If none of them help, you will have to reinstall the operating system.
Resetting Windows 10 to factory settings yourself is not difficult. In most situations, the suggested Microsoft programs and utilities do an excellent job of this task. If not, you can use a recovery disk/flash drive. One way or another, you can reinstall the OS after saving your personal data.
The Windows 10 operating system has been improved by Microsoft compared to Windows 8 and earlier versions in a number of ways. One of them is the process of resetting Windows to its original state, which has been significantly changed. A user who wants to reset the operating system to its basic state is no longer required to have a disk or flash drive with its image - all the necessary files are stored on the computer, and recovery can be done directly from them.
You should resort to rolling back the system to its original state in extreme cases when problems that have arisen cannot be resolved. As part of this material, we suggest that you familiarize yourself with the instructions on how to reset Windows 10 to its original state in case of various malfunctions of the operating system. The material also provides information on what to do if problems arise when returning the PC to its original state.
How to reset Windows 10 from the system interface
If the Windows 10 operating system is running on your computer, but for some reason you need to roll it back to its original state, this can be done quite easily. You can run an automatic reinstallation of Windows 10 as follows:
After some time (depending on the volume hard drive on your computer), the system will delete all files or move some of them to (if the option to save files was selected). After this, the computer will reboot and start reinstalling Windows 10. After some time, the computer will boot with a “clean” operating system.
If the computer system does not boot, resetting it is quite simple, but only if you have a pre-created bootable flash drive or . If you bother creating them, to roll back the operating system to its original state, just do the following:
During a system rollback, the computer will restart several times and you will need to configure its basic settings.
When you try to reset your Windows 10 computer to its original state, you may encounter an error that prevents you from doing so. This problem occurs due to the fact that the files necessary for system recovery are not found on the computer. Resetting Windows 10 to its original state is done using files located in . If they were completely or partially removed, an error may appear indicating that there was a problem resetting the PC to its original state.
In this case, you need to run and then write the command in it sfc /scannow and press Enter. The computer will begin to perform an integrity check Windows files and loading the missing ones, if any are found.
