Transfer data to Android. How to turn it on? How to enable packet data on android How to enable mobile data on htc

In order to use the mobile Internet on your phone or tablet, you need to enable data transfer, otherwise nothing will work. Today we will talk about how to do this correctly.

In fact, on devices based on operating system Android transfer turning on data is incredibly simple: in the curtain, which can be seen if you swipe your finger from the top edge of the screen to the bottom, there is this item. This is what he looks like Samsung Galaxy:

And so - on devices where the official one is installed Android firmware without any decorations:

Accordingly, to enable data transfer, you just need to click on the indicated buttons.

Of course, you can activate data transfer using the menu. So, in the same Samsung Galaxy you need to go to “Settings” and, remaining on the “Connections” tab, select “Other networks”.

Then - " Mobile networks».

Here we put a tick next to the “Mobile data” item.

Agree, the first method is much simpler and more convenient.

Why might data transfer not work?

In some cases, data transfer does not work, which may also be indicated by the absence of a corresponding icon at the top of the screen. What to do?

• First of all, we check the balance - if there are no funds in the account, then there will be no Internet, except for those cases when a prepaid tariff is used.

• If there are no problems with the balance, be sure to reboot the device, because most likely this is a banal glitch that was noticed on the most different devices and various firmwares.

• It is possible that the correct settings for data transfer are not set. If they are out of order, you can check with your telecom operator correct settings(usually they are sent via SMS) and set them up yourself, fortunately, this is not at all difficult.

• Alternatively, the problem is in the SIM card itself. In some cases, it needs to be replaced.

If you find your HTC phone is slow and inefficient, you may want to buy a new one, since science and technology have been developed at such high speeds. But what would you do with the data on your old phone? Are you going to leave all your important contacts, messages, audio and video? Not really, I think. You probably managed to transfer data from HTC to your new Android phone.

Typically, you can connect both your HTC and newer Android phones to your computer and have data copied and pasted between them. Well, that's easier said than done. I'm afraid there are a lot of people who can't really do it right, always a matter of trial and error. That's why I suggest you take a few minutes to read this article to understand and be more effective. People in particular with a lot of data files on an old phone should pay close attention to data protection.

A professional HTC to Android data transfer tool is required. I would like to recommend one to you in the future, the dr.fone – switch. It is a feature-rich application, providing various features to help you manage your phone data. You can transfer all the data about you, select from the old one htc phone on your newly purchased Android phone with dr.fone in just one click, data including messages, contacts, calendar, call logs, music files, video, etc. The advantage of this is that you can save a lot of time and energy compared to its counterpart. And it's reliable and on the safe side.

Download dr.fone and install it on your computer. Be careful when you choose versions, for there are two different Windows versions, and Mac.

After installing it, it's time to learn how to transfer data from HTC phone to New phone Android currently. It will be much easier if you follow these steps:

step 1. Make a connection

Connect like HTC & new Android phone With USB support cable to the computer. Once you plug them in, software recognizes them automatically and intelligently.

Step 2: Select Content to Transfer

Then you can see the main window pop up and either of your phones will be “Source” and the other “Destination”. Make sure HTC one is set as the source. In the box, you have to select which data you want to transfer and check it to back it up first.

Step 3. Start Transferring Data from HTC to New Android Phone

At this point, you just need to click on “ Start of transmission“ and it will start transferring the data you selected from HTC to Android Phone. meanwhile, you can see it happening through the Progress Transfer window, and you reserve the right to call its end before doing so. Or after it finishes, click “OK” to get confirmation. It is important that both phones are properly connected without disconnecting, or you may lose some data forever.

Open "Settings". You can access your mobile device settings from the application organizer or from the desktop. The settings icon looks like a gear.

Select "Data usage". It should be located at the top of the menu.

• In old Android versions This item may be called “Mobile Networks”.

1. Click on the “Mobile data” slider. Thanks to this you will be able to INCLUDE the data. In older versions of Android OS, you need to check the box next to “Data enabled”.

   • Please note that your mobile plan must support mobile data usage, in otherwise you will not be able to use this service. To use mobile data, you will also need a cellular signal.

2. Make sure you have an internet connection. You should see “3G” or “4G” next to the signal icon in the notification bar. Please note that not all mobile devices will display this if they have a data connection, so the best way is to simply open your web browser and check if your internet connection is working by going to any website.

   Troubleshooting

   1. Make sure Airplane mode (or Airplane mode) is turned off. In airplane mode, the data network is automatically turned off. You can switch to airplane mode from the Settings menu. You can also press and hold the power button and then select Airplane Mode from the menu that appears.

      Check that you are not roaming. Most devices turn off data transfer by default when they are roaming (that is, outside their network). This is due to the fact that data transfer while roaming is significantly more expensive. If you need to use mobile data while roaming, you can always turn it on.

      • Open Settings and select Data usage.
      • Click the menu button (⋮) in the upper right corner.
      • Check the “Data roaming” box.

   2. Make sure you haven't exceeded your data usage limits. mobile operator. Depending on your mobile plan, you may have strict data usage limits. If these limits are exceeded, the mobile operator may sharply reduce the data transfer speed or completely disable access to them.

      • The amount of data used can be viewed in the “Data usage” menu. IN this menu Mobile operator restrictions are not displayed.

   3. Restart your device if you cannot access the Internet. If you have checked all possible options and still cannot access mobile data, try rebooting mobile device, and then try to connect to the Internet again.

   4. Contact your mobile operator's customer support to reset your APN settings. When a data signal is received, the device connects to the access point using the APN identifier. If the APNs have changed, you will not be able to connect to the network. In this case, you will need to contact the support service of your mobile operator. Our support staff will help you configure APN access points correctly.

      • You can configure the APN by opening the “Settings” menu and then selecting “More...”. After that, select “Mobile networks” and click “Access Point Names”.

If desired, use mobile phone or a tablet to gain access to the Internet, you need to enable data transfer. In cases where this is not done, there will be no result. From this article you will learn how to do this correctly.

In fact, in devices based on the Android OS, this is very easy to do. If the user swipes his finger across the screen from top to bottom, then it is possible to find this item in the curtain. To enable data transfer, you just need to click on it.

There is, of course, an option that allows you to activate data transfer using the menu.

For example, let's take the Samsung Galaxy and see how this is done on it:

Go to the “Settings” section.

Let's go to the "Connection" tab.

Select the item “Other networks”.

Let's activate it.

It is obvious that the originally described method is significantly superior in terms of convenience and simplicity.

Why doesn't data transfer turn on on Android?
?

If you don't see the appropriate icon at the top of the screen, your device is not enabled for data transfer. What to do in such a situation? You should start by checking your balance. After all, the absence of funds on it automatically excludes the presence of the Internet, except for those options when the prepaid tariff is activated.

Now prices for Mobile Internet are constantly decreasing. This means that more and more users are interested in how to enable mobile data transfer on their Android device.

Method No. 1. Enable data transfer through the top curtain.

In many cases, if you open the top curtain on an Android device, among the row of buttons you can find a button called “Mobile Data”. Using this button you can quickly enable data transfer on your Android device. If you do not have such a button, then you can enable data transfer through the settings.

Method No. 2. Enable data transfer through Android settings.

If necessary, you can enable data transfer through the Android settings. To do this, you need to open settings and go to the “Other networks” section.

If you do not have such a settings section, then most likely it is called differently. For example, it may be called "More" or "Advanced".

Once you have opened the Other Networks section, you need to go to the Mobile Networks section.

In the Mobile Networks section, you can enable or disable two features: Mobile Data and Data Roaming.

The Mobile Data feature is responsible for data transfer in all cases, and the Data Roaming feature is responsible for data transfer while roaming.

If you want to enable data transfer only for your native mobile operator, then enable the “Mobile Data” function and disable “Data Roaming”. If you want data transfer to work even when you are roaming, then enable both of these functions.