Huawei mediapad 10 link 3g firmware.
By the name of the topic, you already understood what we will do next. Today we have prepared a small instruction and a couple of firmware for Huawei_Mediapad_10_Link-S10-201. Why change the firmware?
Sooner or later, the device may experience errors that simple reset settings can't be fixed. For example: Recently they brought me such a device and they said that my son was playing, he did something now when connected to Google Play gives an internet connection error. At first I thought it was not a problem and very easy to fix. Climbed into the settings, stopped the services and cleared the cache. Rebooted the device, tried to log in, it gave a new error "No data transfer", although my device is connected to a Wi-Fi network.
Whatever I did, I updated the version of the market, deleted all updates, reset the device settings, but nothing happened. Therefore, I decided to go to the extreme step "Flashing". Now we will tell you how to do it. The device is not new, but maybe someone needs it and does not want to pay money in service centers for that. After all, the process will take no more than 10 minutes.
What do we need for firmware?
- Firmware:
- S10-201L.Android4.1_C170B003_Russia (official)
- S10-201wa.Android4.1_C170B003_Russia (official)
- The device must be charged at least 40%
- MicroSD memory card with at least 2 GB of memory.
Instructions for installing official firmware:
- Download required firmware from our site.
- Unzip it to your computer.
- Connect the memory card using a card reader to the computer.
- Format the memory card. (there shouldn't be anything on it at all)
- Open the unpacked folder and drag the folder with the name "dload" to the memory card and wait for completion.
- Remove the card and install it in the device.
- Turn off your tablet.
- Now carefully!
- Click the button volume down and without releasing press on food (Inclusion).
- As soon as the tablet vibrate release the power button and without releasing the down key Press up key.
- You must have two keys pressed down (-) and up (+).
- Keep them until the installation process begins. (A green Android will appear and a loading bar at the bottom as shown in the picture above.)
Upon completion of the firmware, you will see such a notification.
This means that the process was successful and you can now remove the memory card from the device. When the memory card is removed your device will automatically restart. But it will take some time for the first launch.
That's all, thanks for your attention.
Welcome, this article contains information about a mobile device. Here you can download latest version android firmware on Huawei MediaPad 10 Link and you can also find out how to get a root rights .
You can read more about root rights. Instructions for getting it are below.
In what cases it is necessary to update the firmware
- I want to install new firmware to expand the capabilities of the smartphone;
- Recovering from an unsuccessful firmware is necessary
- The device constantly reboots for no reason;
- The device does not turn on.
What firmware do we have
To download android firmware 5.1 Lollipop, 6.0 Marshmallow, 7.0 Nougat, Android 8.0 O on Huawei MediaPad 10 Link, read the article in full - this is important. By installing the latest available android version you will be surprised at the possibilities. And also you can find the official version of the MIUI firmware different versions and custom original firmware.
If you have any questions, you can contact us via the comment form.
Firmware available: In stock.
Download firmware
Leaving a review through the comment system, indicate a real email if you have problems installing the firmware. Please note that the site administration may not respond immediately, depending on the flow of applicants. In addition to the administration, they can answer and help you ordinary users, just like on the forum.
The manual on how to install the firmware is on the links below. Firmware download for Huawei MediaPad 10 Link is available via torrent with instructions.
Firmware installation instructions
To download, select the firmware you need and click on the link.
To install, do the following:
- Download the file with firmware and special program
- Run the program on the computer
- You take desired version firmware
- Follow the instructions from the file archive
Video on firmware Huawei MediaPad 10 Link
Sooner or later, the moment comes when the Huawei MediaPad 10 FHD starts to work poorly, slow down and give frequent errors. In this case, the Huawei MediaPad 10 FHD firmware should help solve these problems.
However, with simple freezes, the system should not be immediately reflashed, first you need to make sure that it will not be possible to solve the problem in another way. If there are no options, then you can install a new OS. You can do it yourself, without the services of specialists, if you follow the instructions below exactly.
You can download an Android update to your tablet from various sites dedicated to mobile devices. There might be like official versions Software and amateur builds, so you need to correctly select the version that is right for your device.
The best option is to download the firmware from the official website of the manufacturer, as there is always current versions, which will definitely work without problems on your device. And most importantly, they are safe and will not contain malware.
Download firmware on Android 4.1 for different versions of Huawei Mediapad 10 FHD tablet at the link below:
- Download firmware for S10-101u (Wi-Fi + 3G)
- Download firmware for S10-101w (wi-fi)
- Download firmware for S10-101l (Wi-Fi + LTE)
It is important to know before the firmware!
Before flashing your device, you need to know a few important things:
- Be sure to make sure that the charge is at least 80 percent. Ideally, of course, 100%! If the device goes out due to low battery before the installation process is completed, it is unlikely that anything will help your device.
- During the firmware process, everything is deleted from the gadget's memory. Therefore, if there is important data, then you need to do backup to a memory card.
- The downloaded archive with the firmware must be unpacked to a USB flash drive, and not to internal memory.
- To install, the memory card must have a FAT32 file system.
- The firmware must be unpacked into the folder " download", which you need to create on a flash drive. It is there that the flash driver will look for the installation file.
Firmware
Firmware can be done in more than one way, we will consider the most effective one below, it will allow you to update Android as simply and quickly as possible.
Preparing for the firmware
First you need to determine exactly what firmware is needed. The fact is that in rare cases this can kill the device and then the help of the wizard will be required.
Before starting the firmware, you need to charge the tablet, as mentioned above, and have a computer and a USB cable, a flash drive with file system FAT32.
Since the memory is cleared, you need to transfer all important data to another location or make a backup copy to a memory card or computer. After that, you need to reset the settings to roll back the system to the factory settings. Next, you need to insert a memory card into the tablet, and then connect it to the computer using a USB cable.
We open a memory card on the computer and save the archive with the firmware there, it should be the folder " download» (inside which the files update.app and unlmt.cfg).
Preparing for installation new system is over, after these steps, you can start actually flashing the tablet.
After everything has been done according to the instructions, the device must be disconnected from the computer and turned off, and then turned on again. The installation should complete automatically.
After turning on the device, a green robot will appear on the screen - a symbol of the operating room. Android systems, and below it is the firmware installation scale. After the installation is complete, the tablet should start in normal mode.
However, there are options when, after the preparation has been done, the installation does not start automatically. For this to happen, several steps must be taken. About two available ways solutions to this problem will be discussed later.
If the firmware did not start: method 1
The firmware process has not started, but you should not panic right away: there are two simple ways to solve this problem (the firmware files should already be on the flash drive in the folder download) . First: you need to start the tablet and go to " Calculator". There you need to dial the combination ()()2846579()()=. This will open the hidden service menu. We open " Project Menu Act», in the next window click " Upgrade». Next select " SD card upgrade" and finally - " SD card upgrade External Storage».
If after these steps the tablet automatically starts rebooting, then this is not an error, on the contrary, everything is done correctly. Next, the green robot should appear again in full screen and a scale that shows the progress of the installation of the system.
However, it may happen that this method did not help either. Do not despair, as there is another option. It's a bit more complicated than the above, but still...
If the firmware did not start: method 2
You need to get a USB flash drive from the tablet and connect the included tablet to the computer using the same cable. The main difference from the standard installation is that the unpacked firmware file must be dropped into the internal memory in the folder download. This is what we do.
Next, disconnect the device from the computer, go to " Calculator» and enter ()()2846579()()=. Hidden settings will open. There we select the section " Project Menu Act". When it opens, press " Upgrade". In the new window select " SD card upgrade". Then the last menu we need will open, in it we press “ SD card upgrade Internal Storage». After these simple steps, the tablet will go into a forced reboot, then the robot will appear again and the software installation will begin. If this does not happen, it means that a mistake was made somewhere and you need to try again.
When the tablet boots up, it should not be touched for some more time, as updates for the touchscreen and modem will go on it, after which the device will go into reboot again. This completes the installation.
How to manually download and update:
This Huawei MediaPad 10 Link built-in driver must be included in the operating Windows system® or be available for download through the Center windows updates® (Windows® Update). The built-in driver supports the basic functions of your Huawei MediaPad 10 Link hardware.How to perform automatic download and update:
Recommendation: If you are inexperienced with updating Huawei Tablet device drivers, we highly recommend downloading DriverDoc driver update tool. DriverDoc is a utility that automatically downloads and updates your MediaPad 10 Link drivers to make sure you're installing the correct driver version for your operating system.
With a database of over 2,150,000 drivers, DriverDoc not only keeps your Tablet drivers updated, but the rest of your PC's drivers as well.
Install optional products - DriverDoc (Solvusoft) | | | |
Huawei Update Frequently Asked Questions
What do Huawei Tablet Device Drivers do?
These tiny programs, called "device drivers," allow your device's MediaPad 10 Link to communicate properly with your operating system.
What Operating Systems are Compatible with MediaPad 10 Link Drivers?
The latest MediaPad 10 Link drivers are supported by Windows.
How to update MediaPad 10 Link drivers?
MediaPad 10 Link device drivers can be updated manually using the Windows Device Manager or automatically using the Scan and Update Driver tool.
What are the benefits and risks of updating MediaPad 10 Link drivers?
Key Benefits of MediaPad 10 Link Driver Update - Proper Functioning, Increased Functionality and Improved Performance hardware. The primary risks of installing incorrect Tablet drivers include system instability, hardware incompatibilities, and system crashes.
About the author: Jay Geeter ( jay-geater) is the president and CEO Solvusoft Corporation, a global company dedicated to software and focusing on innovative service programs. He has been passionate about computers all his life and loves everything related to computers, software and new technologies.
