How to install windows on lenovo g500 laptop. Lenovo service center
Increasingly, questions appear on the network about how windows 7 is installed on Lenovo laptops. Moreover, people who encounter such a problem, in most cases, do not understand what the installation problems are connected with. At the same time, their laptops are new, and there can be no breakdowns. But errors and stoppers still occur. We will talk today about how the windows system is installed on Lenovo laptops, since this is a very urgent problem.
Most Common Problems
If you ask everyone why they want to reinstall the windows system on a laptop, then in most cases you will hear the answer that allegedly on all new computers the “eight” is set by default, which you can’t always get used to and which doesn’t always suit the user with its own “ tricky" tricks. Much more convenient is the “seven”, which is familiar to everyone, which is both more understandable in use and more convenient for solving specific problems. That is why on new laptops, their owners decide to change the OS.
The most common problem when installing the "seven" on a Lenovo laptop is that the user cannot log in at all. BIOS system. Even schoolchildren know that in order to reinstall windows, you should enter the basis of the basics of a computer - BIOS.
Other problems may arise during the installation process. We will dwell on them further.
Multiple installation paths
So, you cannot enter the BIOS, and you already have some doubts about whether Lenovo laptops have it at all. In fact, there is, only it is arranged a little differently and the settings are for specific model you need your own computers. But the standard Fn + F10 command helps some when starting windows to enter the BIOS.
In order for you to see that cherished BIOS window that opens, you should slightly prepare your equipment. First, insert into the drive of the turned on computer installation disk. In our case, this is windows 7. Then you have to turn off the computer, disconnect it from power and remove the battery. Yes, it sounds ridiculous, but in most cases it helps. So, After that, it returns the battery to the place where it should be and turn on the laptop through the Novo button, which is located next to the start button.
During the download, you will see that you have entered the service menu. There, select the "Diagnostics" tab. From there, set "Settings" software UEFI. After that, your computer will notify you with a short message that it needs to be restarted. If you follow the recommendations of your technology, then in the future, after rebooting, the computer will enter the BIOS itself.
Next, you should find the Security section, where you disable the SecuryBoot option. Next, in the main menu, look for the Startup tab. Now you need to arrange the boot order of the disks, which will guide the system. To do this, in the Boot tab we find HDD computer (as a rule, it is designated as ATAHDD) and use the "+" key or the top arrow to raise this tab to the very top. There may also be a problem that the tab does not rise. Then it will act on the contrary - we lower the WindowBootManager tab to the very bottom. In second place in the list should be the name "ATAPICD1", and after it the parameter from which the windows system will be reinstalled.
After all these tricky manipulations, we go back and look for the UEFI \ LegacyBoot tab and select the LegacyOnly parameter there. After you have saved using the F10 key, you can start the standard reinstallation of the system.
If this standard procedure did not help you, then you always have the opportunity to go to the official website of the Lenovo manufacturer and see a few tricks for installing the system there. But after you have found the BIOS on a LENOVO laptop, you should not have any further problems with reinstallation, as it is standard for all models of computers and laptops.
windowsTune.ru
Lenovo B50 30: installing windows 7. Step by step instructions
Lenovo has long been known to the vast majority of users as a manufacturer of high-quality and inexpensive laptops. Laptops are good technical specifications. However, there are incidents with this manufacturer. Nobody is immune from this. For example, on the Lenovo B50-30 model, installing windows 7 by default was impossible. Why did this happen and how to install the "seven" on this laptop, if it is just from the store? This is what we are going to look into now.
Why did it happen?
Lenovo had no ulterior motive. It's just that this laptop model was developed and sold in 2013. Let's remember what they were doing at Microsoft at that time? Correctly. They in every way (sometimes very aggressively) promoted their new operating system - windows 8. Some manufacturers were forced to somehow limit the ability to install "seven" on their devices. On the official website of the company for the Lenovo B50-30 model, there are no windows 7 drivers at all.
The most interesting thing is that updating the BIOS did not solve the problem in any way (although it should have). Curses and all sorts of disasters fell on the company. But all this did not last long. Craftsmen quickly solved the problem. It turned out to be a BIOS setting. By default, the manufacturer pre-installed options that made the installation of the "seven" impossible. And if you consider that for most BIOS users - a dark forest, then a sort of "feint with the ears" worked quite well on the Lenovo B50-30. How to install windows 7 on this model? Easy peasy. And now you are convinced of this.
BIOS settings for installing "seven"
The first step is to go to the BIOS settings. To do this, when loading a laptop, you need to press the key combination FN and F2. Now you should go to the General Settings tab. Here you need to select the Load Default Settings item and click OK. Next, go to the Boot tab and in the line OS Optimized Defaults select Other OS. Now it remains to exit the BIOS, not forgetting to save all changes.
In some cases (especially complex ones), you will still have to install the "eight" and use it to update the BIOS firmware. Sometimes this is necessary, since the stock BIOS does not always allow the user to change the operating system in the boot options. But after the update everything should be fine. Next, you can reboot your Lenovo B50-30. Installing windows 7 is now possible.
Installation process
It differs little from the standard one. In fact, there is no difference at all. But it is better to describe it all. So, the algorithm for installing the "seven" on the Lenovo B50-30 after all the manipulations with the BIOS:
- We insert a USB flash drive or disk with windows installation files.
- While booting, hold down the key combination FN and F12. A dialog box will appear.
- In the window, select the media (CD-DVD for a disk or USB-HDD for a flash drive). After that, the system installer will start loading.
- In the next window, select the installation language and country of location. Click "Next".
- Now select the item "Windows installation only" and create a disk layout. Remember that the "seven" is placed only on NTFS partition. The remaining sections can be adjusted after the installation of the system.
- Click the "Next" button - the installation process begins. The laptop will restart several times.
- After the last reboot, you will be prompted to enter a username and password.
- Click the "Next" button and wait. After a while, the installed system will start.
You have done well with your Lenovo B50-30. Windows 7 installation completed. However, before using the system, you will have to configure something else. For after installation you will be "naked" operating system, which really can't do anything, because it has no devices installed. And this means that you have to install drivers.
Device drivers
What is the problem of Lenovo B50-30 laptop? There are no WiFi drivers (windows 7) or any other drivers for the "seven" on the official site. And Wi-Fi is critical. After all, without the Internet it will not be possible to download other drivers. There are several options here. You can download drivers from the G8. In some cases they are suitable. Or you can go to the component manufacturer's website and download the latest version from there. But in any case, you will need a second computer with Internet access.
Sometimes on the websites of equipment manufacturers there is no software for the Lenovo B50-30 model. However, the driver for Wi-Fi will be in any case. It's worth putting it on. And further problems can be solved through the "Device Manager" in the installed OS. It allows you to update hardware drivers from official Microsoft servers. As long as the "seven" is officially supported, they will not go anywhere from there. The main thing is to get the Internet on this piece of iron. Once you do this, life will immediately become easier.
Conclusion
Undoubtedly, this article will be useful for those who are "lucky enough" to purchase a Lenovo B50-30 laptop. Installing windows 7 on it is possible, although the process is somewhat unusual. For some inexperienced users, it may seem unrealistically complicated. But in fact, there is nothing difficult in this. The main thing is to update the BIOS and change its settings a little. After that, it will be possible to install at least "seven", even "Linux", even "MacOS" on this laptop.
fb.ru
Lenovo G50-30 laptop - how to install windows 7
Good day everyone. They brought a laptop Lenovo G50-30 to install the system. Looks like it's not the first time I've been doing this. The laptop is new. Got into the settings, disabled UEFI, Secure boot. Enabled compatibility with win7. Started installation. Crashes after copying files blue screen"The BIOS in this system is not fully ACPI compliant Stop 0x000000A5". Tried to put win XP - even with F7 slamming - the same eggs. Tried to boot from WIN XP PE, WIN7 PE - the same blue screen. Victoria, Memtest also do not start. I'm in stupor. It is clear that it swears at ACPI, but why don't tests run from under DOS? There are no items with ACPI settings. There was one crazy idea that the problem was with the RAM. But the laptop is guaranteed and the whole bottom is in stickers. You won't be able to climb inside. What will be the options?
How to install windows 7 on a Lenovo G50-30 laptop - recipe number 1.
- First, according to the instructions from the official Lenovo website.
- Next - boot from the windows 7 installation disk.
- Press Shift + (+ Fn) F10 - a command prompt will open.
- Run in command line console utility for working with disks, partitions and volumes in windows: diskpart
- List disk to find one to work with.list disk
- Select disk 0
- Clean the drive from other partitions.clean
- Transform GPT disk to MBR.convert mbr
- Exit Diskpartexit
How to enter BIOS on Lenovo G50-30 laptop?
To enter BIOS on Lenovo G50-30, press Fn + F2 at startup.
Lenovo G50-30 + windows 7 - recipe number 2.
- In the BIOS, in the Exit -> OS Optimized Defaults tab, set windows 7 OS.
- In the tab Configuration -> USB mode we set 2.0. (we will return 3.0 later)
- In the Boot tab, set Boot Mode, Boot Priority on.
- Select Exit -> Exit Saving Changes, confirm YES.
- During reboot, press Fn + F12, Boot Manager opens, where we select Legacy CD ROM (DVD).
windows 7 on Lenovo G50-30 using BIOS update - recipe number 3.
- AT current windows 8 download from the official website of Lenovo BIOS and update to latest version.
- We install windows 8 x64, we reach the partition settings, destroy all partitions, create new ones - for the system and the rest. (Item No. 1 and Item No. 2 can be swapped, depending on whether Win8 is already installed or not)
- We go into the BIOS, change USB3.0 to USB 2.0 in the second tab.
- In the last tab, I change the OS from Win8x64 to Win7.
- In the same place, click Load Default Settings.
- We save everything, restart the laptop and install Win7 x64 without any problems (it doesn’t matter from a disk or flash drive).
Solution 0x000000a5 + Lenovo G50-30 with windows 7 already uploaded to the disk - recipe number 4.
If windows 7 is already uploaded to the disk (for example, sysrep), then you can overcome bluescreen like this:
- We go into the BIOS, change USB3.0 to USB 2.0 in the second tab (we will return it later)
- In the last tab, change the OS from Win8 to Win7.
- Click Load Default Settings.
- Save & Exit.
The order of actions is important! Bluescreen is no more.
Windows 7 is a popular operating system that features speed, improved security, and a user-friendly interface that is customizable to your taste. Many laptop and computer owners prefer Windows 7 to other versions of the operating system.
Lenovo laptops have certain features when installing Windows 7, primarily related to BIOS setup. In order to install Windows 7 on a Lenovo laptop, you must prepare the computer in advance by properly configuring the BIOS, as well as complete all the steps for installing the operating system on the PC.
Quick article navigation
Training
Before you install the Windows 7 operating system, you must prepare your computer. This requires:
- Copy all important files With hard drive C:;
- View the desktop and copy the necessary documents;
- Save information from the desktop and hard drive C: to D:, CD, DVD or flash media.
BIOS setup
You can install Windows 7 on a Lenovo laptop only after correct setting BIOS.
BIOS entry
- Turn on the laptop;
- Insert boot disk from the OS to the drive;
- Turn off the laptop;
- Take out the battery;
- Unplug the power cord from the mains;
- Insert power into place;
- Start the laptop with the "NOVO" button located next to the power button. The service menu will open;
- Set the parameters "Russian language" and "Russian keyboard layout";
- Select the "Diagnostics" section;
- Go to the "Advanced Options" subsection;
- Click on the item "UEFI Firmware Settings";
- To restart a computer. After restarting the laptop, the BIOS menu will open;
Changing BIOS settings
- Go to the "Security" section;
- Highlight the line "Secure Boot" using the arrow keys;
- Press the "Enter" key;
- Select the value "Disabled";
- Return to the BIOS main menu with the "Esc" key;
- Go to the "Startup" section;
- Select the item "Boot";
- Press the "Enter" key;
- Use the "+" and "-" keys to sort the list of devices so that the drive is in first place in the boot list;
- Return to the menu of the "Startup" section by pressing the "Esc" key;
- Select the item "UEFI / Legacy Boot";
- Change the parameter "UEFI Only" to the value "Legacy Only";
- Save changes with the "F10" key;
- Confirm saving with the "Enter" key.
Installing Windows 7
By changing BIOS settings you can start installing Windows 7. This requires:
- Reboot device;
- Wait until the laptop finds the boot device and opens the installation menu;
- Select the system language;
- Click on the "Next" button;
- Press the "Install" button;
- Accept the terms of the license by ticking the appropriate box;
- Click on the "Next" button;
- Click on the line " Full installation". A list of sections will open;
- Select the partition on which Windows 7 will be installed;
- Click on the line "Disk Setup";
- Click on the "Format" button;
- Confirm formatting by clicking the OK button. After formatting is completed, click the "Next" button;
- Wait for the installation of Windows 7 to finish;
- Set up the system (enter username, set time zone, etc.).
Partitioning
An unpartitioned hard drive can be divided into multiple partitions during installation. This will require:
- Select the item "Full installation";
- Go to hard drive;
- Click on the line "Disk Setup";
- Delete all partitions on the disk;
- Press the "Create" button;
- Select the desired memory size;
- Click on the "OK" button;
- Create a second partition with the remaining amount of memory;
- Select the partition on which Windows 7 will be installed.
Increasingly, questions appear on the network about how Windows 7 is installed on Lenovo laptops. Moreover, people who encounter such a problem, in most cases, do not understand what the installation problems are connected with. At the same time, their laptops are new, and there can be no breakdowns. But errors and stoppers still occur. We will talk today about how Windows is installed on Lenovo laptops, since this is a very urgent problem.
Most Common Problems
If you ask everyone for what reason they want to reinstall Windows system on a laptop, in most cases you will hear the answer that supposedly on all new computers the default is “eight”, which you can’t always get used to and which doesn’t always suit the user with its “intricate” lotions. Much more convenient is the “seven”, which is familiar to everyone, which is both more understandable in use and more convenient for solving specific problems. That is why on new laptops, their owners decide to change the OS.
The most common problem when installing the "seven" on a Lenovo laptop is that the user cannot enter the BIOS system at all. Even schoolchildren know that in order to reinstall Windows, you must enter the foundation of the computer - BIOS.
Other problems may arise during the installation process. We will dwell on them further.
Multiple installation paths
So, you cannot enter the BIOS, and you already have some doubts about whether Lenovo laptops have it at all. In fact, there is, only it is arranged a little differently and the settings for a specific computer model need their own. But the standard Fn + F10 command helps some with Windows startup to enter the BIOS.
In order for you to see that cherished BIOS window that opens, you should slightly prepare your equipment. First, the installation disc is inserted into the drive of the turned on computer. In our case, this is Windows 7. Then you must turn off the computer, unplug it from power, and remove the battery. Yes, it sounds ridiculous, but in most cases it helps. So, After that, it returns the battery to the place where it should be and turn on the laptop through the Novo button, which is located next to the start button.
During the download, you will see that you have entered the service menu. There, select the "Diagnostics" tab. From there, set "UEFI Software Options". After that, your computer will notify you with a short message that it needs to be restarted. If you follow the recommendations of your technology, then in the future, after rebooting, the computer will enter the BIOS itself.
Next, you should find the Security section, where you disable the SecuryBoot option. Next, in the main menu, look for the Startup tab. Now you need to arrange the boot order of the disks, which will guide the system. To do this, in the Boot tab, we find the computer's hard drive (as a rule, it is designated as ATAHDD) and use the "+" key or the top arrow to raise this tab to the very top. There may also be a problem that the tab does not rise. Then it will act on the contrary - we lower the WindowBootManager tab to the very bottom. The second place in the list should be the name "ATAPICD1", and after it the parameter from which the .
After all these tricky manipulations, we go back and look for the UEFI \ LegacyBoot tab and select the LegacyOnly parameter there. After you have saved using the F10 key, you can start the standard reinstallation of the system.
Lenovo has long been known to the vast majority of users as a manufacturer of high-quality and inexpensive laptops. Laptops have good technical characteristics. However, there are incidents with this manufacturer. Nobody is immune from this. For example, on a model, installing Windows 7 by default was not possible. Why did this happen and how to install the "seven" on this laptop, if it is just from the store? This is what we are going to look into now.
Why did it happen?
Lenovo had no ulterior motive. It's just that this laptop model was developed and sold in 2013. Let's remember what they were doing at Microsoft at that time? Correctly. They in every way (sometimes very aggressively) promoted their new operating system - Windows 8. Some manufacturers were forced to somehow limit the ability to install the "seven" on their devices. On the official website of the company for the Lenovo B50-30 model Windows drivers 7 are missing altogether.
The most interesting thing is that updating the BIOS did not solve the problem in any way (although it should have). Curses and all sorts of disasters fell on the company. But all this did not last long. Craftsmen quickly solved the problem. It turned out to be a BIOS setting. By default, the manufacturer pre-installed options that made the installation of the "seven" impossible. And if you consider that for most BIOS users - a dark forest, then a sort of "feint with the ears" worked quite well on the Lenovo B50-30. How to install Windows 7 on this model? Easy peasy. And now you are convinced of this.
BIOS settings for installing "seven"
The first step is to go to the BIOS settings. To do this, when loading a laptop, you need to press the key combination FN and F2. Now you should go to the General Settings tab. Here you need to select the Load Default Settings item and click OK. Next, go to the Boot tab and in the line OS Optimized Defaults select Other OS. Now it remains to exit the BIOS, not forgetting to save all changes.
In some cases (especially complex ones), you still have to install the G8 and update it with it. Sometimes this is necessary, since the stock BIOS does not always allow the user to change the operating system in the boot options. But after the update everything should be fine. Next, you can reboot your Lenovo B50-30. Windows installation 7 is now possible.
Installation process
It differs little from the standard one. In fact, there is no difference at all. But it is better to describe it all. So, the algorithm for installing the "seven" on after all the manipulations with the BIOS:
- We insert a USB flash drive or disk with Windows installation files.
- While booting, hold down the key combination FN and F12. A dialog box will appear.
- In the window, select the media (CD-DVD for a disk or USB-HDD for a flash drive). After that, the system installer will start loading.
- In the next window, select the installation language and country of location. Click "Next".
- Now select the item "Only install Windows" and create a disk layout. Remember that the "seven" is placed only on the NTFS partition. The remaining sections can be adjusted after the installation of the system.
- Click the "Next" button - the installation process begins. The laptop will restart several times.
- After the last reboot, you will be prompted to enter a username and password.
- Click the "Next" button and wait. After a while, the installed system will start.
You have done well with your Lenovo B50-30. Windows 7 installation is complete. However, before using the system, you will have to configure something else. For after installation, you will have a “bare” operating system in front of you, which can’t really do anything, since no devices are installed in it. And this means that you have to install drivers.
Device drivers
What is the problem WiFi drivers (Windows 7) or any other drivers for the "seven" on the official site are missing. And Wi-Fi is critical. After all, without the Internet it will not be possible to download other drivers. There are several options here. You can download drivers from the G8. In some cases they are suitable. Or you can go to the component manufacturer's website and download the latest version from there. But in any case, you will need a second computer with Internet access.
Sometimes on the websites of equipment manufacturers there is no software for the Lenovo B50-30 model. However, the driver for Wi-Fi will be in any case. It's worth putting it on. And further problems can be solved through the "Device Manager" in the installed OS. It allows you to update hardware drivers from official Microsoft servers. As long as the "seven" is officially supported, they will not go anywhere from there. The main thing is to get the Internet on this piece of iron. Once you do this, life will immediately become easier.
Conclusion
Undoubtedly, this article will be useful for those who are "lucky enough" to purchase a Lenovo B50-30 laptop. Installing Windows 7 on it is possible, although the process is somewhat unusual. For some inexperienced users, it may seem unrealistically complicated. But in fact, there is nothing difficult in this. The main thing is to update the BIOS and change its settings a little. After that, it will be possible to install at least "seven", even "Linux", even "MacOS" on this laptop.
Lenovo is currently the fourth largest PC maker in the world. The company's arsenal includes desktop PCs, laptops, Cell phones, smartphones, netbooks and even servers, monitors, tablets, video cards. And this is despite such additions to all of the above, such as mice, keyboards, memory modules, optical drives, power supplies, software and accessories, as well as covers, bags for laptops. The breadth of the company's product range is impressive, and filling the consumer market with Lenovo electronics requires serious support. The Lenovo specialized service center carries out it in many cities, especially in large centers of the country.
Today, there is a fairly common tendency to turn not to specialized service centers, but to little-known "but very understanding" equipment repairmen. When making such a choice, it is worth understanding that the Lenovo service center is directly engaged exclusively in this type of equipment and electronics and one hundred percent knows the intricacies of this particular company. Moreover, the Lenovo service center has the opportunity to quickly cooperate with other specialized companies that supply the necessary original parts for Lenovo equipment.
It is worth noting that most of the gadgets that are produced by this company have a wide range of non-standard and unique parts that can be found in few places. This is a known problem of Lenovo devices, but everything is solved thanks to specialists. Only a Lenovo service center is able to get such necessary parts for a laptop as, for example, a matrix or original backlight lamps. In any case, if you have any problems with the electronics of this company, you should contact the Lenovo service center, and here's why:
1. Only specialists can guarantee the quality of the work performed, with complete diagnosis and determining the exact cause of the problem.
2. Exclusively in service center If necessary, Lenovo will offer you to replace a non-working part with an original one. You can get an original part only by specially ordering it somewhere in advance, or from another phone, but in the center it comes directly in the shortest possible time.
3. Lenovo service centers carry out maintenance of all company equipment, as they have selected and trained specialists directly to service Lenovo.
4. After purchasing one or another Lenovo gadget, the buyer acquires a warranty card or check, with which you can get free service. This service is provided exclusively at the Lenovo service center. This right is lost if the device has already been opened before the service specialist.
5. Maintenance of any Lenovo products can take place in any of the services after the end of the warranty period.
On the Lenovo service center website, you can see the list of gadgets that are subject to repair, as well as see the pricing policy (if the repair is not under warranty) and the location of the nearest service office. Among them you will see services for the repair of tablets, laptops, netbooks, monoblocks at low prices. Masters performing repair work not only replace parts, but also carefully understand the essence of the problem, doing everything possible to prevent a recurrence of the incident.
In the Lenovo service center you will be offered a wide range of services for repair and determination of the cause of the breakdown:
testing the entire system for breakdowns, the correct operation of all functions;
diagnostics of the gadget, including the operation of internal systems, heating, the operation of each part, which helps to accurately determine the cause of the breakdown, and also prevents new breakdowns of the device;
replacement of parts, including the matrix of an electronic device. The size of its diagonal is not important, since the Lenovo service center works directly with the company's suppliers;
repair of the matrix and other elements of equipment. Masters undertake repairs only after a thorough investigation and diagnosis of the problem, when the cause is discovered, and the repair solution becomes obvious to them;
complex repair of the entire device, which may be necessary in case of major breakdowns, for example, after the gadget falls from a great height, etc.
Repair of individual parts, not to mention a comprehensive repair, requires the intervention of a true professional, and given the originality and originality of some of the company's electronics designs, only a Lenovo service center can perform this work with high quality. In their daily work, the masters regularly use high-class repair equipment, which allows them to perform the most delicate tasks. Among these working tools, mention should be made of:
specialized digital microscopes that allow for accurate diagnosis;
soldering stations class BGA;
necessary for the implementation of a complete repair and diagnostics of the hardware-software complex.
Moreover, each Lenovo service center also offers simpler services, for example, qualified advice to customers who wish to purchase electronics and equipment from this manufacturer. The specialists in the center have experience working with many devices, as well as deep knowledge in each of them, so consultations on the correct operation, use of individual device functions, etc. are also provided directly by Lenovo service centers. Among other offers, there is also a change, software update for laptops, netbooks or stationary PCs.
Thus, the decision to use the services of the Lenovo service center is the most correct one if your gadget has begun to work incorrectly, or if specific functions are not recalled, as well as in the event of absolutely any problems or questions in the field of technology and electronic technologies from Lenovo.