How to add a frame to a photo in Photoshop. How to insert a frame in Photoshop

Now let's do the same operation using another popular program- Photoshop.

I have it installed on my computer old version - Adobe Photoshop CS2. And she suits me with everything. If you have a different version, it is possible that some aspects of working with the program will differ from those shown, but in general the algorithm will be the same.

Open Adobe Photoshop. Let's go File - Open

and in the window that opens, select our template from the folder where it is located. Now our template appears in the program window:

Now we need to open the photo of our sailor. Let's go to the menu again File - Open and find our portrait on the computer. Our sailor appeared in the program window on top of our template.

I save all my templates with a resolution of 300 dpi and a size of 200 x 90 mm. Therefore, after opening the photo of the girl, I adjust it (the photo) to the size of the template. Otherwise, the photo and template may vary greatly. To do this, go to the program menu Image - Image size... and in the window that appears, I set the same resolution as the template, as well as a height approximately equal to the height of the template:

When resizing a photo, do not forget to check the box Maintain proportions.

Now we need to move our sailor onto the template. First, let's activate Move Tool

after which, by hovering the cursor over the photo and holding down the left mouse button, you need to “drag” the sailor onto the template.

Some versions of Photoshop do not support direct drag-and-drop. In this case, we will do it differently: on the tab with the photo of the sailor we go Select all(our photo is highlighted), then Editing - Copy. Now go to the tab with the template (frame) and click Editing - Paste.

If this window pops up, click Convert:

Now our photo is on top of the template and we can move it freely using the mouse. So that it is the sailor, and not the template itself, that moves in the window Layers The layer with the girl’s photo should be activated (click on it and it will turn dark blue):

Let's move the photo closer to the frame cutout. Now we need to move it outside the frame so that it is visible only through its cutout. To do this in the window Layers, hovering the cursor over the layer with the sailor and holding down the left mouse button, let’s “drop” (drag) this layer down:

The layers swapped places and our sailor “hid” behind the frame:

I would like to increase the size of our photo a little. Making sure that the window Layers the layer with our photo is active, go to the menu Editing - Free Transform:

A frame appeared around the photo. While holding down the key Shift, you can use the cursor to reduce or enlarge the size of the photo by holding it at any of its corners:

After resizing and adjusting the photo in the template window, click Enter and the frame around the photo will disappear. There is only one small thing left - save our template in the “mirror” for sublimation. Go to the menu Image - Rotate canvas - Flip canvas horizontally:

Our template is ready!

Well, to reinforce this, watch this video tutorial:

vYUDIdl4L6o

Do you want to know how to consistently earn money online from 500 rubles a day?
Download my free book
=>>

This article will tell you how to use the Paint program and how you can insert a photo into a frame using this program?

This program is usually included in Windows image 7 or more new developments of this popular OS. But the paint program is included in the standard set Windows programs, is not suitable for this operation.

Of course, you can quickly take a photo with a frame and even insert an inscription. But this is more suitable for novice users.

For more advanced ones, it is better to use other programs. To work with frames and photos you need to either download and install on your computer paint program.net.

The difference between the programs is small, but, as a rule, they have very few functions. With this program you can open a photo of a downloaded frame, select the desired area and cut it out using the scissors tool.

Then copy the desired photo from your computer and paste it onto the cut-out section of the frame using the “paste from clipboard” function.

This is often difficult to do for beginners, since standard program you can insert text on a photo, do a little retouching, change the size of photos and nothing more.

Although if you suffer for a long time, whatever happens. In such a program there are no layers, but in a similar program paint.net there are layers and for this reason it is much more convenient to work with photographs.

Step one - download frames for paint

So, to insert a photo into a frame, you need to find this very frame on the Internet. Let's open any browser and in the search bar and write, download frames for paint.

Many sites will open where you can download frames on any topic. Next, download the frame you need to your computer. The frame must be in PNG format.

Why this format? It’s just that images in this format do not contain a background, or rather there is a background, but it is transparent. Or take a photo from your computer and carry out the necessary manipulations with it.

In paint.net, as well as in the standard Paint program, you can upload a photo. Then select an area in the form of a square, oval or arbitrary shape anywhere and delete the selected area.

Step two - open a new file in the program

Once you have stocked up on the frames you need, open the paint program. In the left top corner program, find the inscription “file”, click on the word file and find in the drop-down window “open a new file or folder”.

Click, and a standard download window will open in front of you, where you need to find the downloaded frame, select it and at the very bottom boot window, click on the “open” button. After these simple steps, the frame you selected will appear in the program.

Step three - import a photo

In the program we find the inscription “layers”, click and find the “import from file” tab. Find your photo and open the desired photo. It will open on top of the frame, the next task is to place the photo behind the frame.

To do this, you need to click on the “layers” button in the program; in the window that opens, we find the image of an arrow pointing down. Click on this arrow, and your photo will be outside the frame.

Now you need to place the photo outside the frame as you need it. Although your photo is in the background, its outlines are outlined with dotted lines.

Step four - manipulation of the photo and frame

When you hover your mouse over any corner of your photo, you will see a small image of a hand. Next, press keyboard Shift and simultaneously press the left mouse button. With the buttons pressed, you begin to resize your photo.

Such manipulations are necessary so that it does not lose its proportions. After resizing, release the Shift button on the keyboard and, holding down the left mouse button, move the photo to the location you need.

Step five - saving the photo in a frame

After you have combined the frame with the photo, you need to merge the layers. The easiest way is to click on the “save as” function, after clicking on this inscription, a window will appear where you will be asked to combine the layers.

It is recommended to save the resulting photo with the JPG or JPEG extension. Such extensions are optimal for saving photos, since if you save a photo with a different extension, you may not be able to open it on your computer.

To do this, you will have to install additional programs with the required extension. If you don't know what will happen to your operating system After installing such files, it is better not to take risks.

If suddenly the photo does not want to move, this means that you have not activated the photo moving function. This is very easy to fix. You need to find the “tools” section on the left side of the program and click on the arrow symbol with a cross.

Your image can then be moved in any direction. After the desired alignment, save the resulting photo to your computer. And we use the image at our discretion.

How to insert a photo into a frame in Paint, conclusion

Now you know how to insert a photo into a frame in Paint, but I would still advise downloading a more convenient program designed for this. Such free programs there are many now and you have a choice.

For those who do not like to download programs onto their computer, I can suggest trying to use Photoshop online to insert a photo into a frame. How to use such a service is described in one of my articles.

I wish you to create beautiful collages, no matter what program you use! Good luck to all.

P.S. I am attaching screenshots of my earnings in affiliate programs. And I remind you that everyone can do it, even a beginner! The main thing is to do it correctly, which means learning from those who are already earning money, that is, from professionals.

Do you want to know what mistakes beginners make?


99% of beginners make these mistakes and fail in business and making money on the Internet! Make sure you don't repeat these mistakes - “3 + 1 ROOKIE MISTAKES THAT KILL RESULTS”.

Do you urgently need money?


Download for free: “ TOP – 5 ways to make money online”. 5 the best ways making money on the Internet, which is guaranteed to bring you results of 1,000 rubles per day or more.

Here is a ready-made solution for your business!


And for those who are used to taking ready-made solutions, there is “Project of ready-made solutions for starting to make money on the Internet”. Find out how to start your own business online, even for the greenest beginner, without technical knowledge, and even without expertise.

For every taste, but they all have different formats - Png, Jpeg, PSD.

How to insert a frame in Photoshop: Jpeg format

1. First of all, open your original image.


2. A base layer is needed. To do this, double-click on the layer icon with the left mouse button. When the New Layer window opens, simply click Yes. The layer will be named "Layer 0".


3. Now you need to select the place where the photo will be inserted. To do this, you can use any familiar selection tool.


4. Click Delete. A checkerboard pattern that appears in the selected area means that a transparent area has been created. Now press Ctrl+D and deselect.


5. Open the photo you want to put in, then select the Move tool and drag the photo onto the frame. If it is larger, press Ctrl+T.


6. Click on any corner handle while holding Shift and drag it into the photo. The image must be placed above the frame, it should be slightly larger than its size. Press Enter.


7. The last step is to change layers. All that remains is to merge the layers using the keyboard shortcut Shift+Ctrl+E, and the photo is ready.

How to insert a frame in Photoshop correctly: PNG format

1. Open the original PNG image and the photo you will be inserting into the frame.


2. You need to select the “Move” tool, left-click on the second photo and drag it onto the image with a frame.


3. The photo must be placed above the frame.


4. Now swap the layers.


5. Place the photo the way you like by pressing Ctrl+T and holding Shift. Merge the layers using the combination Shift+Ctrl+E.


6. Press the Shift+Ctrl+S keys and enter the file name and type – jpeg in the saving window that appears, then click “Save”.

How to insert a frame in Photoshop: PSD format

This format is the most convenient, but in order to correctly insert a frame in Photoshop, you need to take into account some of its features.

1. Open your original image and photo.


2. Using the Move Tool, drag the photo onto the framed image.


3. The Layers palette will have multiple layers, rather than just one, as is the case with other formats. Find the layer with the frame and place the photo underneath it.


4. Press Ctrl+T and, while holding Shift, reduce the photo to the desired size. Arrange it in the frame the way you like. Press Enter.


5. In this case, many layers give room for creativity - many of the elements that make up the frame are on separate layers. If you don't like something, you can disable or remove this element.


6. Press Shift+Ctrl+S and save the photo in PSD or Jpeg format if you want to print the photo in a frame.

An ordinary photograph can be exquisitely decorated to your taste using a colorful frame. Moreover, there are quite a few different photo frames on the Internet. But here many novice users are faced with a problem: they do not know how to insert a photo into a frame.

Today's article - free lesson Photoshop for beginners. As we get acquainted with it, we will learn how to insert our photographs into frames using Adobe Photoshop. If you have never worked in Photoshop, it doesn’t matter; after reading this article, in the future you can easily insert your photos into frames - it’s very simple.

Popular formats for photo frames are: .psd And .png, general feature The advantage of these image formats is that in images with these formats it is possible to make the background transparent. It is precisely instead of this transparent background that the photograph is inserted.

In an image in .jpg format, instead of a transparent background, the background will be white.

So, let's start inserting our photo into a beautiful New Year's frame in .psd format.

1. First, open Adobe Photoshop. Next, open the image of the selected frame ( Menu File -> Open…) or using a keyboard shortcut Ctrl+O:

In the center of the frame that opens, we see an area (indicated by white and gray squares) for inserting a photo.

An area of ​​white and gray squares tells us that in this place transparent background in the picture, it is indicated exactly like that.

In the layers panel (on the right side of the program window) we see that the frame in the .psd format consists of several layers - this is a feature of images in the .psd format.

If desired, you can turn off unnecessary layers without redrawing the image again. You can have a little fun with turning layers off and on by clicking on the eye icon next to each layer.

2. We also open the photo that we are going to insert into the frame.

On the left side of the toolbar, select a tool "Move". Move the mouse pointer to the photo and, holding down the left mouse button, drag the photo onto the window with a frame.

3. We see that the photo is superimposed on the frame and we need to lower it.

To do this, go to the layers panel. We see that another layer has been added to the frame layers "Layer 1"— a layer with a photo.

In my case it is above all the layers of the frame. We need to move it under a certain layer so that the photo fits into the frame. To do this, click (select) the layer with the photo and, holding down the left mouse button, alternately move the layer with the photo under each layer of the frame. In my case, I had to move the photo layer under all the frame layers to make the photo fit into the frame.

4. Now we need to adjust the photo to the size of the frame; if the photo is larger than the frame, we reduce it; if it’s less, like mine, then we increase it.

First, let's make sure that the photo layer is active (i.e., selected). After this, the keyboard shortcut Ctrl+T or through the menu ( Edit -> Free Transform) call . After this, the following frame will appear around the photo:

Now enlarge, reduce or rotate the photo to fit the frame. To prevent your photo from being distorted and to maintain its proportions, hold down the key when changing the photo. Shift. If, when editing a photo, it goes beyond the frame, like mine, then there is nothing to worry about:

After the photo has been adjusted to the size of the frame, double-click with the left mouse button or press the key Enter. The editing frame around the photo will disappear:

5. Now we save our photo with a frame; to do this, select the menu ( File -> Save As...):

In the window that opens, enter the name of our made picture according to your wishes, in my case "New Year's photo". And select the image type .jpg. Select a location to save the photo and press the button "Save".

Here in the field "Quality" put a number "8" — high quality Images. Typically, “eight” is enough to save the image in good quality.

This completes the insertion of the photo into the frame. We received this New Year's photo:

Now let's look at inserting a photo into a frame in .png format.

This method of inserting a photo into a frame is no different from the previous one. As I already said, a frame in .png format can also have a transparent background.

1. Open the frame in .png format in the same way.

In the layers panel we see that this frame has only one layer.

2. I specifically chose a frame not for one photo, but for several, in order to show that inserting several photos or one is no different, but there are some nuances, which you can read about below.

Open the photo. Calling "Free Transform" and adjust the photo to the first area for the photo in the frame.

We see that the photo extends beyond the area below - no problem, later we will cover this part with a third photo. The photo also extends beyond the area at the top and sides, but this is all hidden by the frame itself.

3. Add and adjust the second photo in the same way.

4. Now we just have to add and adjust the last photo. The layer with the third photo should be higher than the layers with the previous two photos to hide their overlap with the insertion area of ​​the third photo.

5. I adjusted the photo to size, but still in one of the corners the photo extends beyond the area. We need to fix this. To do this, select the tool "Rectangular Marquee" and select the protruding part of the photo:

Press the key Delete and the protruding part of the photo is removed. To remove the selection, press the key combination Ctrl+D.

6. That's all. Now we repeat steps 5 and 6 from the previous example of inserting a photo into a frame to save our New Year's photo.

As a result, we got this photo:

If you don't have Photoshop installed, then trial version you can download from our website - Adobe Photoshop.

If you have questions about working in Adobe Photoshop, then ask them in the comments and perhaps in the next Photoshop lesson we will look at your question.

7 simple ways how to make your own frames in photoshop.
Welcome, dear reader of the site!

To make a frame in Photoshop, you don’t need to know the program well.

Minimal knowledge of Photoshop is enough.

So, let's start from simple to more complex.

Method 1 – stroke.

Open the image. Select either the entire image or part of it.

If you need to make a frame for the entire image, then it is best to use the keyboard shortcut CTRL+A, but if you need to select part of the image, use the selection tools.

After the selection is ready, go to<Редактирование> –<выполнить обводку>

In the window that appears, select the thickness, color, and location of the stroke—inside.

If you select the location of the stroke -outside-, then the image size can be reduced using the command -Free Transform - keyboard shortcut CTRL + T, holding Shift key to maintain proportions.

Or increase the canvas size to the required dimensions.

From the above it follows method 2:using the underlying layer:

The resulting empty space can be filled with any color, gradient, or texture on a new layer.

In this case, the image layer must be above the color layer or texture layer.

If your image layer is a background layer, then you should transfer it to a regular layer by double-clicking on it and clicking OK in the window that appears.

Method 3. Use styles.

Create a new layer above the image layer and fill it with any style. Styles for every taste can be downloaded on the Internet.

We select, for example, an oval area and clear it by pressing the Del key.

In this case, the bottom layer with the image can be moved, adjusting it to the resulting frame.

You can add text and also apply a style to it.

Method 4. Use blending options – layer styles.

We create new document, let's say 10 cm x 15 cm.

Fill the layer with the pattern you like.

Select the area, clear the contents - Del key

Remove selection, Ctrl+D.

Double-click on the layer, or call up the blending options by clicking on the icon:

Select the overlay options, for example: shadow, emboss, stroke.

Place the image under the resulting layer.

Method 5. in Photoshop.

Open the image and add a new layer.

On a new layer, create a quick mask - press Q.

Then free transformation - reduce the mask in size.

Let's go to Filter - Strokes - Airbrush.

We set the sizes to your liking

Exit the quick mask: press the Q key again

Got selection:

Invert the selection

Fill the selected area (layer 1) with a color or gradient.

Remove selection.

Method 6. Use raster shapes.

Open the image and unlock the background layer.

In the toolbar, select the raster shape that is most suitable for creating a frame. The figures can also be found on the Internet.

Select the desired fragment

Change the arrangement of layers, and by clicking Alt key stand with the mouse between the layers.

An icon will appear – click.

Then you can merge the layers Ctrl+E

Add a new layer below the image layer

Add overlay effects to the image layer

Fill the bottom layer and you can apply a filter<Эффекты освещения>.

Or any other, play around - whatever you like most.

By changing the transparency of the layer and using masks, you can achieve different effects.

Method 7. Do it transparent frame in Photoshop.

Open the image, duplicate the background layer three times - pressing the Ctrl+J key combination three times

Disable the top two layers by clicking on the eye icon opposite the layer. And let’s immediately rename the layers so as not to get confused.

Being on layer 1 go to<Фильтр>-<Размытие>-<Размытие по Гауссу>.

Blurring the image

Let's add noise. Let's go to<Фильтр>-<Шум>-<Добавить шум>