home > Internet > Kingston datatraveler 100 g3 is not formatted. Instructions for recovering flash drives Kingston

Kingston datatraveler 100 g3 is not formatted. Instructions for recovering flash drives Kingston

Kingston flash drives are known for their reliability and long life, but they are also not immune to various failures. Sometimes the drive really "dies" and it is not possible to restore it. More often there are situations when a flash drive can be brought back to life using a special firmware utility.

Most often, Kingston dt100g2 and datatraveler flash drives break.

Is it possible to recover a flash drive

Signs that the drive can be recovered:

When you connect a flash drive, a notification appears that a new device has been detected.
The system prompts you to format the removable drive.
Drive won't open but shows up in File Explorer.
Errors occur when reading and writing data.

These problems are fixed by flashing the controller or formatting the media, but if the flash drive has important information, then before performing any recovery procedures, you need to try to “pull it out”. Use a recovery program like Recuva or to extract so you don't lose your files.

Search for a program for controller firmware

To restore, you will need a special utility for the Kingston flash drive. In order not to make a mistake and download the right program, you need to know the drive controller model.

Method 1

Look necessary information You can go to the flashboot.ru website in the iFlash section, using the VID and PID values of the flash drive as a filter.

Connect the drive to your computer.
Open the device manager (right click on the "Computer" icon - Manage).
Find "USB Mass Storage Device".
Right click and open properties.
Go to the Details section and select the Hardware ID property.

Method 2

Another way to get the information you need is to download the program flash drive Information Extractor and click the "Get Data" button. The report will contain the lines "VID" and "PID"; use their value to find a utility that can correctly restore the Kingston Datatraveler flash drive.

You can download the program in the "Files" section on the flashboot.ru website. If the utility is not here, try to find it on other web resources.

Recovery utilities

You can find the program you need without a controller model - just type in the search engine the query "kingston recovery utility". In the results, you will see several utilities, among which there will definitely be such programs as Phison Preformat, AlcorMP AU698x RT, etc.

The problem is that Kingston flash drive recovery programs only work if they are compatible with the controller installed in the drive. Therefore, if you download the first repair utility that comes across, it may not detect the connected media.

When the desired program is found, you can start restoring it. Be sure to look at the instructions that should be packed into the archive along with the recovery utility - perhaps the program has a special operating procedure. The general order of recovery looks like this:

You don’t need to do anything else: the program will correct errors on its own and return the flash drive to operational state. This completes the recovery of the Kingston flash drive; if the firmware of the controller did not help fix the problem, then the cause of incorrect operation should be looked for among hardware faults.

Kingston flash drives are very popular due to the fact that they are quite inexpensive and reliable. It cannot be said that they are cheaper than others, but their cost can still be called low. But, since absolutely everything breaks in our world, it is not at all surprising that Kingston removable media can also fail.

This happens quite simply - you insert a USB flash drive into a computer, and he "does not want" to read data from it. The drive may be detected, but everything will look as if there is no data on it. Or simply not all data may be determined. In general, situations can be very different. In any case, we will analyze a few effective ways restore the performance of a Kingston drive.

Kingston has own funds flash drive recovery. There is also universal way recovery of removable media, which is relevant for devices of any company. We will analyze all the most working methods.

Method 1: MediaRECOVER

This is one of two branded programs from Kingston. To use it, you must do the following:

The second option looks more humane» for a flash drive. It just involves restoring a flash drive. In any case, if using MediaRECOVER doesn't help, move on to the next method.

Method 2: Kingston Format Utility

This is another brand Kingston program. It is suitable for all flash drives of this brand, from the DTX 30 series to USB Datatraveler HyperX devices. This utility also formats the flash drive without a chance to save any information. To use the Kingston Format Utility, do the following:

Method 3: HDD Low Level Format Tool

Based on user reviews, this program copes well with damaged Kingston flash drives. Low Level Format Tool works at a low level, so it is quite successful in what it does. And this applies not only to removable media from Kingston. But, again, the utility formats the flash drive and restores its performance, but not the data from it. To use this program, you need to do quite a bit, namely:

Method 4: Super Stick Recovery Tool

Another very simple program, designed to restore Kingmax flash drives, but is also suitable for Kingston (although for many it will seem quite unexpected). So, to take advantage of the Super Stick recovery tool, do the following:

program, insert a USB flash drive and run the executable file.
If everything is fine and the program can work with your flash drive, information about it will appear in the main window. Click on the button " update" to start formatting. After that, just wait until the process is over and try to work with the flash drive again.

Method 5: Search for other recovery utilities

Not all models Kingston flash drives those programs that are indicated in methods 1-4 will do. In fact, there are a lot of such programs. In addition, there is a single database with information about programs designed for recovery. It is located on the site's iFlash service. The process for using this repository is as follows:

This method is suitable for all flash drives.

Method 6: Standard Windows Tools

If all the above methods did not help, you can always use standard tool Windows formatting.

You can also use the standard Windows tool to format the flash drive. Try different combinations of the order of actions - first format, then check and correct errors, and then vice versa. It is quite possible that something will still help and the flash drive will become operational again. To format removable media, right-click again on the selected drive in " computer". In the dropdown menu, click " Format…". Next, in the next window, just click on the " To begin».

It is worth saying that all the above methods, except for checking the disk with the standard Windows tool, involve the complete and irretrievable loss of data from the media. Therefore, before performing all these methods, use one of the data recovery utilities from a damaged storage medium.

Many users face problems when it fails USB stick(flash drive), and here even such a reliable company as Kingston is no exception. Symptoms that the drive is out of order, but it can still be saved are the following:

Problems when writing or reading data from a flash drive to a computer, freezing, witting;

The flash drive appeared in the explorer, or any file manager, but it is impossible to open it, gives different error messages;

When a drive is connected, the operating system always offers to format it (even after the formatting procedure has been completed);

When connected to a PC, the system displays a message about finding a new device, but it does not go any further;

For the recovery procedure, flash drives are needed special utilities for Kingston. For the correct choice, you need to know the controller model, we need information about the VID and PID of the flash drive (unique identifiers). You can find them out by operating system, or by downloading and installing the Flash Drive Information Extractor.

First way. Connect the USB drive, call context menu my computer and go to "Management" select "Device Manager" in the list of "USB controllers" we find "Storage USB device”, in which we also open the context menu and select “Properties”. In the properties, select the "Details" tab and select "Hardware ID" from the drop-down list. This way we get the information we need.

Another way is to get the data with Flash programs Drive Information Extractor, after installing it, connect the USB drive and click on the "Get Data" button in the program.

Next, you need to use specialized sites to search for the necessary recovery programs (flashboot.ru is popular among them). In one of the sections, namely iFlash, by entering previously received data on the VID and PID of the drive, we will receive information that the utility should look for and download.

If you have a Kingston flash drive with a size of 8, 16 or 32 gigabytes, then the following utilities will be in the list of programs for their resuscitation:
Phison Preformat;
AlcorMP AU698xRT;

After loading desired program, install it on your Personal Computer and start. We connect the USB drive of the failed one, if it appears in the program window, then it is selected correctly. It remains to select it and click on the "Start" button. The utility will fix all errors automatically. Turn off the flash drive and check the result.

But before you do anything, think about how valuable information is stored on it? If the data is important, then it would be better to try to restore it before and after the firmware. For this you can use Recuva program, or another similar one. And if super-important data is stored there, which is very important and valuable, then in this case, it is better not to do anything on your own. Take the flash drive to a specialized service center, where specialists can restore it with less risk to your data.

Restoring a flash drive using the example of Kingston DT

In our example, a flash drive will be used. Kingston DataTraveler Elite 3.0 16GB. She worked for the time being, normally for the time being, but then oddities began. When you try to delete or write data, the whole process is so slow that you can say it didn’t move at all. After re-connecting, the system issued a message asking you to format the disk.

Given the low importance of the data on the device, it was decided to format it. The formatting process took a long time and was not completed. There was only a message that said about an unsuccessful attempt to perform formatting.

We connect our faulty flash drive and run the utility. At the top of the program window there will be a button for receiving data, click on it. After that, we will see all the information on the device. We pay attention to the values that stand near VID and PID.

Re-flashing a faulty kingston flash drive

While we turn off the drive. We launch the utility for flashing (our program is called MPTool.exe). If the application comes with a file called readme.txt then take a look at it. There are probably instructions in there. I note that the utilities are different and yours may look a little different. But in general, the interface and the principle of operation should be similar.

After starting the flashing program, you need to reconnect the USB flash drive. The utility will then detect the device. Now it remains just to click on the button to start flashing the firmware. Let's wait a bit until the process is completed.

Upon completion, the program will let you know that everything went well.

Then a system message will immediately appear that it needs to be formatted before working with the device. But it is better to immediately disconnect the flash drive, and then connect it again. And only after that proceed to the formatting process. After completing all these procedures, you can check the operation of the flash drive. Everything works as fast as it should and files are adequately copied and read. Do not forget that some steps may be slightly different from those described in this article. But in general, the whole process looks like this.