Connect Huawei to PC via USB. HiSuite Utility
Hi all! In this article, we will talk about how to connect Android as a modem to a computer. The need for such a scheme arose from the author of the blog, again at work. Remember moving a small LAN?
And so it is with her that the intense struggle continues. Today, an accountant called with a request to set up the Internet, as they are running out of deadlines for submitting various declarations to the tax office. Of course, an interesting task, given the fact that the telephone line does not yet work in the room.
But none of the computers, unfortunately, is equipped with a wireless network card, so the run-in scheme with the organization disappears immediately. But there is a solution, and it is quite simple.
So, friends, in order to connect an Android smartphone to a computer as a modem, we need drivers for the mobile device used and a standard USB charging cable from the kit. In general, we connect:
In this example, we use Huawei P7 based on the operating system Android version 4.4.2. Immediately after pairing the devices, the computer will start detecting the phone and will ask you to install drivers. We must agree with this.
It is known for certain that many users have difficulties at this step, since the disk out of the box is not always at hand, and not everyone can find the right version of drivers on the Internet the first time.
So here is the advice. Download immediately a proprietary program for synchronizing your gadget with a computer. It will already have all the files and components necessary for installation. For example, for Huawei it is called HiSuite.
After that, the first step is to go to the "Settings" menu:
Then, in the wireless networks section, select "More":
In the next step, we find the option "Modem mode":
And, in fact, put a daw in front of the "USB modem" function:
Now it remains only to return to the very beginning and activate the data transfer:
It is clear that for this you need to have a configured mobile 3G Internet service on your phone, which is provided by the mobile operator within the framework of the tariff plan used.
And now, in principle, our Android smartphone should already work in modem mode for a computer via a USB cable. If the pages in the browser do not open, you need to check whether the recently appeared telephone connection is active on the PC:
Also in such cases it would be useful to use PING. And on this, our story on how to connect Android as a modem to a computer via USB has come to its logical conclusion.
If you have any questions, ask them in the comments to the article. Together we will think about their solution. And in the end, you can watch another interesting video.
There are quite a few reasons why the computer does not see the smartphone. Most often this is due to the activation of any other connection mode, except for the USB drive. Either this happens due to missing or driver conflicts. Less often, the cause may be various malfunctions in the equipment.
This article provides solutions to the most common problems that arise when connecting a mobile device to a PC via USB. For convenience, all tips are divided by importance.
The smartphone is not recognized as an external drive
Note:the smartphone must be turned on if it is locked with a pattern key - you need to unlock it!
The very first and obvious action is to let the computer understand in which mode the device is connected. If the smartphone just charges when the cable is connected, it may be connected in charging mode or as a media player. If you are using an Android device, you need to activate the developer mode, and then enable USB debugging.
For instructions on how to activate developer mode and USB debugging, see this video.
When everything is done, the next time you reconnect, pay attention to the display and notification curtain on your smartphone. A notification should appear in which you need to select the item "Enable USB storage". 
If you use a smartphone with a different OS, everything is the same there. In most cases, in order for the device to be recognized as an external drive, you must select the correct connection type.
One more thing: check if the modem mode is activated in the mobile device. We go into the network settings, and if the modem is activated, turn it off.
Computer not responding at all
It is advisable to check the health of the components as early as possible to save your own time. If a characteristic signal is not heard during connection, the charge indicator does not blink on the smartphone, the backlight does not turn on, pop-up notifications do not appear - we are trying to temporarily change the equipment.
Steps taken:
- We check the USB cable for serviceability. We just use another working cable, and that's it.
- We connect to other connectors. Inoperative USB ports can only be referred to if no “USB” peripherals connect to them at all: mice, keyboards, flash drives, etc.
- We are trying to connect the smartphone via USB to another system unit or laptop. If it worked, we are looking for problems with the drivers and operating system on our PC.
Software problems
Let's say the computer is responding to the machine, but a notification appears on the taskbar that the driver installation failed. This indicates the need to install the "correct" USB drivers on the PC.
Often, generic drivers can be downloaded from the manufacturer's website. For example, the official websites of Samsung and LG have special sections where you can download a driver that will fit all Samsung and LG models, respectively.
If you have connected many devices from different manufacturers, their drivers may conflict. Try to remove the extra ones, and reinstall the necessary ones. Do not forget to restart the PC (you can also phone at the same time).
If nothing helps at all
In the event that after the executionabsolutely everyone recommendations the computer does not see the smartphone, it cannot be ruled out that the USB connector on the smartphone is defective. Without special skills and certain equipment, this problem cannot be solved on its own. It is necessary to carry the mobile device to a service center, or to a workshop where USB soldering will be carried out.
You will also like:
How to determine the LTE channel number by frequency
Grannyphones 2016: an overview of current models
In this manual, we will briefly tell you about the possibilities of connecting a Huawei mobile device to a PC.
To get started, connect your Huawei device to the usb connector, an icon will appear on the notification panel indicating the connection. Next, on the phone, lower the notification panel and click on the current connection.
In the list that appears, select the type - HiSuite and wait until Windows installs the drivers on the new device.
After that, go to "Computer" and run the installation file in the new virtual drive that appears (you can simply click on this icon once).
The HiSuite installer will automatically download and install the required synchronization components and driver. This action requires an active internet connection.
If the HiSuite connection option is not listed, you must download and install HiSuite yourself.
After successful installation, you need to disconnect and reconnect the Huawei device to the computer, it is advisable to restart it.
Then you can synchronize with PC through the HiSuite utility in the windows menu or copy files through Explorer, depending on the type of connection selected through the notification panel (HiSuite or MTP).
Many users, when trying to connect their phone to a computer using a USB cable, are faced with the fact that the computer does not recognize the connected gadget. The connected device is charging, while there is no access to the smartphone itself and its internal contents. I also encountered this synchronization problem, and in this article I will tell you why the computer does not see the phone via USB, and I will also share various methods for solving this issue.
The whole complex of reasons for the problem that the PC does not see the smartphone through the USB cable, I would divide into hardware and software, and below I will list each of them, in parallel providing instructions for fixing it. But before using the methods I have indicated, try restarting your computer and smartphone - this does not help as rarely as it seems. This problem mainly occurs with Samsung, Lenovo, HTC, LG, and Fly devices.
So why does the computer not see the phone via USB, but is charging - hardware reasons
1. Damaged cableUSB. It often happens that the cause of this dysfunction is damage to the USB cable itself. Cables from little-known or "non-name" manufacturers do not have a large margin of safety, and can fail in just a couple of months from the start of operation, and as a result, the computer will not detect the connected phone.
In addition, even the most reliable cables from global brands are prone to stochastic damage - they can be accidentally damaged during use, pets can chew them or spoil them by children. Therefore, first of all, inspect your USB cable for the possibility of mechanical damage, and, if the external safety of the cable, try using it to connect your device to another computer. If the device is not recognized on another PC, try replacing the cord.
2. Damaged portUSBon the computer. The USB ports used in the computer are also subject to various mechanical damage, including damage to the USB controller, as well as damage to the south bridge of the motherboard. Try plugging the cable into a different USB port, if that doesn't fix the connection between your phone and PC, follow the further advice.
3. Damaged socket for connecting the cable on the phone. Has the smartphone jack been exposed to water or damaged? If yes, then it needs to be replaced.
4. Try removing the battery. According to some users who also had a problem with the fact that the computer did not see the phone through U-ES-BI, removing the battery from the smartphone helped.
Turn off the battery, remove the battery from it for a few seconds, then put it back, and turn your device back on.
If nothing helps you fix this problem, then describe your situation. What you have already done, and what happens to your Android device when you USB connect your gadget to a PC in the comments, I will try to help not only me, but also everyone who has encountered this problem.
The computer does not see the phone via USB - software reasons
After describing the hardware reasons, we will list the main software reasons, if your computer still does not recognize a cell phone connected using a USB cable, follow the further instructions.
1. Working with the settings.We go into the settings of our device, select “Memory” there, click on the three dots at the top (Properties), select “USB connection to a computer” and put a tick in front of “Media device” (“USB drive”). If you have a checkmark next to using USB as a modem, uncheck it.
The Windows Update service (for downloading drivers for the phone) and the New Device Discovery service must be enabled on the PC. Don't forget to unlock your phone when connected to your computer, this is important.
If you are a conservative and have Windows XP installed, download the Media Transfer Protocol (MTP) for XP from the Microsoft website and install it on your computer.
2. If your drivers have crashedUSB-ports, the computer may not see the phone.When drivers for USB ports malfunction, the latter simply stop working. To fix this problem, install the USB drivers from the "native" driver disk to your PC motherboard, or download the latest drivers from the motherboard manufacturer's website.
Also, due to any reason, power can be turned off for a number of ports.
3. Device drivers have crashed. Go to the "Device Manager" and see if there is a question or exclamation mark in the "Portable devices" item.
Check if your device is there and make sure it works fine by right-clicking on it and clicking "Properties". If it's not there, or if you're in doubt, uninstall the driver, disconnect your phone from the computer, and then turn it back on, and let the system install the driver again. This can help solve the problem that the smartphone does not connect via USB to the computer.
It will also not be superfluous to enter the website of the manufacturer of your smartphone and download the latest drivers for it on your PC (for example, there is a special Samsung Kies software for Samsung).
4. Install the updateKB3010081 (KB3099229). For owners of Windows 10, you may need to install update KB3010081, which is responsible for working with Windows Media Player. This player is directly related to the normal operation of the MTP (Media Transfer Protocol) service, so download and install these updates.
Also, a common cause may be an unreliable assembly of the OS itself on the PC. Only rearranging Windows with a more working version will help here.
5. Custom firmware is not working. The desire of many fans to play around with firmware for their Android device can do them a disservice in the form of a device failure to work normally with a computer. Try to restore the standard firmware or restore from a backup (if any).
There are no drivers for the phone on the computer
Although, usually, a computer with the latest OS detects and sees a smartphone via USB without problems, reverse cases can also be observed. Try to search for a driver for your smartphone on the net, sometimes a driver for similar models of this brand may come up.
The phone may not be detected by the computer due to viruses
Trite, but all sorts of virus programs can block work with external mobile devices. Try checking your computer with Dr. Web CureIt!, this may help in some cases.
If the problem of detecting a mobile device by a computer is not resolved, reset the settings
If until now, your computer does not see the phone via USB, resetting the smartphone using Hard reset. Go to the settings of your phone, select the "Backup" menu item, and select "Data reset" in it.
But I immediately warn you that you will lose your files and settings located in the internal memory of the phone (files located on the SD card will remain intact), so this item should be used only as a last resort!
Conclusion
As you can see, problems with the lack of visibility of the connected phone on the PC can be both software and hardware in nature, and there are a considerable number of such problematic factors. I would advise you to first pay attention to the likely mechanical damage in the cable and device, and only then switch to software methods.
In many cases, a simple reboot of the smartphone (temporary removal of the battery) can help, as well as working with the phone's USB connection settings. If all of the above does not help and the computer does not see the phone via USB, but is charging, then you may need to contact a qualified service center.
P.S. For lovers of visual demonstrations, I present a video on the subject:
In this manual, we will briefly tell you about the possibilities of connecting a Huawei mobile device to a PC.
To get started, connect your Huawei device to the usb connector, an icon will appear on the notification panel indicating the connection. Next, on the phone, lower the notification panel and click on the current connection.
In the list that appears, select the type - HiSuite and wait until Windows installs the drivers on the new device.
After that, go to "Computer" and run the installation file in the new virtual drive that appears (you can simply click on this icon once).
The HiSuite installer will automatically download and install the required synchronization components and driver. This action requires an active internet connection.
If the HiSuite connection option is not listed, you need to download and install HiSuite yourself. After successful installation, you need to disconnect and reconnect the Huawei device to the computer, it is advisable to restart it.
Then you can synchronize with PC through the HiSuite utility in the windows menu or copy files through Explorer, depending on the type of connection selected through the notification panel (HiSuite or MTP).
4huawei.ru
Huawei HiSuite to sync with PC. Download HiSuite
The HiSuite program is a Huawei proprietary utility with wide functionality that allows you to easily synchronize mobile devices running the Google Android operating system with personal computers running Windows OS.
The utility kit includes an adb driver that allows you to connect communicators, smartphones and tablets to a PC and select the connection mode (Media device (MTP), HiSuite mode, Removable media, Camera (PTP)). It is worth noting the fact that with the help of HS you can connect not only Huawei devices, but also smartphones from other manufacturers (for example, HTC).
With HiSuite, you can easily manage any user data on your device, be it photos, music or videos, synchronize and edit your contact list and calendar, send and read SMS and MMS messages directly from your PC, and take screenshots of the communicator and tablet screen , regardless of the version of Android and the presence of root rights on the device.
However, in addition to synchronization, the utility solves another important problem that most owners of mobile gadgets face, namely the problem of data backup. With Huawei HiSuite, you can backup all your important data, including the application, in just one click.
And for executing tasks on a schedule, a convenient task scheduler is built into the utility.
System requirements (for installation on a PC):
Operating system: Windows XP/Vista/7 32/64bit Free hard disk space: about 500mb RAM: 1gb
Supported screen resolution: >1024x768pix, 16bit
4huawei.ru
Connecting Honor 4C to a computer allows you to view or modify files in the phone's memory or files on the MicroSD card in the computer's explorer.
To connect, you will need a standard USB/MicroUSB cable supplied with your phone. Huawei HiSuite is not required for this connection!
There are three options for using this connection:
- Charge only (default mode)
- Files - access to all files
- Photos - access to photos
The information in this article refers to the software version CHM-U01C10B540 aka Android 6.0 with EMUI 4.0. Connection examples are shown for a Windows 8 computer and a Windows 10 computer.
Connecting your phone to a computer
It is carried out with a standard USB/MicroUSB cable (included with the phone), when you first connect the computer installs drivers for the phone. It is undesirable to interrupt the installation of drivers or disconnect the phone before it is completed. After installing the drivers, the "charging only" mode is used. To change the mode, you need to open notifications (lower the curtain) and in the notification "USB connection established" click the Files button or the Photo button to turn on the corresponding mode.
What is a curtain - this is a drop-down panel with the Notifications and Icons tabs. To open the curtain, you need to pull down the top edge of the screen. The curtain will look something like this:
In all modes, the phone is charged from the USB port of the computer. Most computer USB ports are capable of delivering current up to 0.5 A, which is half that of a regular adapter (1A), so charging from a computer usually takes longer. To speed up charging, it is better to use an AC adapter than a computer USB port.
Charge only mode
In this mode, there is no communication between the computer and the phone. At the same time, the phone is still visible on the computer:
Displaying Honor 4C in Windows 8 File Explorer in charge-only mode The phone itself is shown with the CHM-01 icon, but there are no folders or files when you open it.
In addition, HiSuite CD-ROM shows installation files for HiSuite - Android Smart Device Manager - Huawei's smartphone application. Clicking on the icon starts the HiSuite installation. I repeat, HiSuite is not required to view phone files, everything works without it.
Files mode
This mode is activated in notifications by clicking on the Files button, while the phone works as an external drive, making available the phone's memory and MicroSD card.
Displaying Honor 4C in Windows 8 File Explorer in "files" mode Photo mode
This mode is activated in notifications by pressing the Photo button, while the phone works as a camera (or as a scanner), making it possible to work with images and photos.
Displaying Honor 4C in Windows 8 File Explorer in photo mode The example shows that only the SD card is available in photo mode, since saving photos to the SD card is selected in the settings.
When opening the SD card, only the folders with images are visible - DCIM and Pictures.
In the context menu of the phone (icons CHM-U01) there is a command to import images and videos - just like cameras or scanners.
Disconnecting your phone from your computer
Everything is simple here - I disconnect the USB, and a shutdown occurs. At the same time, the phone remembers which mode was selected at the time of disconnection, and the next time you connect USB, it immediately switches to the same mode. This is convenient because you do not have to lower the shutter and select a mode. But it may turn out that I need to charge the phone from someone else's computer, in which case it will make available all the folders of the phone on this computer, which is not very good. Therefore, I usually switch to "charge only" mode before disconnecting the USB cable.
Possible connection problems and their solution
Most often, problems are caused by a failure to install drivers. As a result, when the phone is connected, messages may appear stating that the USB device is not recognized. In this case, you can try reinstalling the drivers.
For example, turn off the phone, restart the computer and connect the phone again. Another option is to delete the unrecognized USB device in the task manager, which will cause the drivers to be reinstalled.
You can also try connecting to another computer.
More rarely, a bad (damaged) cable is the cause of the problem. To check this, you need to try connecting with a different cable.
Using a connection
The configured connection is used, as on other devices, to copy materials such as photos, music, movies, e-books, audio books. You can also use the phone as a USB flash drive - to transfer files, while taking into account the limitations of the MicroSD card. For example, Honor 4C works with memory cards up to 32 GB, and the file size is up to 4 GB, so you can’t write a movie or archive of, say, 5 GB to it.
Copy music from PC to Honor phone
There are no special features here - I created a Music folder on the memory card, and I copy mp3 files from the computer to it with the usual explorer. Standard Player - The Music app automatically finds the copied files and adds them to the Local Music list. Audiobooks are copied in the same way.
Copy Movies from PC to Honor Phone
I also use the standard explorer to copy movies. A feature in the file size limit is that you cannot copy a file larger than 4 GB (for Honor 4C). Also, when you start copying, a Windows message may appear asking you to recode the file - this is not necessary. After copying, you can use the built-in player - the Video application, or you can install VLC for Android from the Play Market.
Copy e-books from PC to Honor phone
Copying FB2, PDF, EPub e-book files is done in the same way. To read books, I use the AlReader application from the Play Market.
Connecting Honor 4C to a computer
nutils.ru
How to connect Huawei MediaPad 10 FHD 3G to computer via USB
Welcome to droidium.ru. In this manual, we will tell you how to connect Huawei MediaPad 10 FHD 3G via USB to a computer or laptop as a USB drive. Currently, all Android devices (phones, smartphones and tablets) can be connected using a USB cable.
If something does not work out for you, ask a question in the comments. So, how to connect Huawei MediaPad 10 FHD 3G to a computer via USB. Before connecting, be sure to install any computer motherboard drivers required to connect your device to your computer via USB.
Connecting Huawei MediaPad 10 FHD 3G via USB to a computer
Connect one end of the included USB cable to your computer and the other end to Huawei MediaPad 10 FHD 3G. After this manipulation, the USB icon should appear in the status bar of the gadget if the device has been recognized.
In Android 4, on most firmwares, USB connection is automatic, so for starters, just try connecting Huawei MediaPad 10 FHD 3G to your computer's USB. If the connection fails, then you can try connecting the gadget to the computer in USB mode in the following way.
Connect the USB cable to Huawei MediaPad 10 FHD 3G and to your computer. Go to the smartphone settings and select the 'Memory' section. Next, find the USB connection settings, where you need to select the device as MTP. A message will appear that the USB is connected, or click on ‘Connect USB as mass storage’ if necessary. After that, a confirmation dialog box will appear. Click 'OK'.
For the old version of Android 2.1, the connection is as follows. On the home screen, use your finger to swipe down the status bar at the top. Then click on 'Connect via USB'. And USB mode is connected.
For Android 2.3, things are a little more complicated. Pull down the notification bar, click on ‘Connect as USB storage’. Then click the 'Ok' button. When the green Android icon turns orange, it means that the gadget has switched to USB mass storage mode. On Windows, it should show up as a removable USB drive with a drive letter assigned to it.
Updated instructions: How to connect Huawei MediaPad 10 FHD 3G to a computer via USB Download
droidium.ru
How to connect Huawei Ascend P6 to a computer via USB
Welcome to droidium.ru. In this manual, we will tell you how to connect Huawei Ascend P6 via USB to a computer or laptop as a USB drive. Currently, all Android devices (phones, smartphones and tablets) can be connected using a USB cable.
If something does not work out for you, ask a question in the comments. So, how to connect Huawei Ascend P6 to a computer via USB. Before connecting, be sure to install any computer motherboard drivers required to connect your device to your computer via USB.
Connecting Huawei Ascend P6 via USB to a computer
Connect one end of the included USB cable to your computer and the other end to Huawei Ascend P6. After this manipulation, the USB icon should appear in the status bar of the gadget if the device has been recognized.
In Android 4, on most firmwares, USB connection is automatic, so for starters, just try connecting Huawei Ascend P6 to the computer's USB. If the connection fails, then you can try connecting the gadget to the computer in USB mode in the following way.
