Utility for complete removal of eset. Uninstalling Eset Smart Security
Many users use ESET Smart Security as an antivirus utility. This is a reliable antivirus that provides complete protection operating system. But it happens that it is necessary to remove it. This may be affected by updating your antivirus or installing another one.
Removal via Windows OS
There are several ways to uninstall. One of them is to use standard means operating system. To do this, go to the Start menu and select Control Panel. Then go to the “Add or Remove Programs” section, select an antivirus and click “Uninstall”.
However, this method may not always be successful. Sometimes during the process of uninstalling the antivirus, the system displays errors, and when trying to install another program, it writes that ESET Smart Security is still on the computer.
Possible mistakes
During the uninstallation process, as well as the installation of the antivirus, all sorts of errors may occur. Among them are several of the most popular. One of them is “The installation failed due to the lack of a basic filtering mechanism.” This error mainly occurs on pirated operating systems, in which many services may be disabled due to unnecessary reasons or by malicious elements.
In addition, the computer may display messages that services are not running, the PC did not restart after uninstallation, or an error occurred during startup. If such an error appears, you need to go to the “Control Panel” and select “Administration”. If necessary, you can enable display by category.
After this, you need to select “Services”. In addition, you can view operating system services by using the Win + R combination and selecting “Run”. In the window that appears, enter the command services.msc.
Then you need to find “Basic Filtering Service” and make sure it is working. If it is disabled, right-click on it and select “Properties”. After that, set “Automatic” in the “Startup type” item. Next, you need to save the changes and restart the computer. Then you should try to eliminate the antivirus.
Also, when uninstalling the antivirus, error 2350 may occur. In this case, you need to run the command line as an administrator. To do this, go to “Start” and select “Programs” and then “Accessories”. Then you should right-click on “Command Prompt” and select “Run as administrator”.
Next, you need to enter the command MSIExec /unregister and MSIExec /regserver, and after each press Enter. After this, you need to restart the PC and you can try to uninstall the antivirus program using existing using Windows. These manipulations should help uninstall the program.
In addition, errors during uninstallation may occur if an incorrect uninstallation was performed before. As a rule, novice users simply delete the directory with the antivirus, which is absolutely not allowed. In this case, you must disable all processes and services of the antivirus utility.
To do this, go to the “Control Panel” and use the “Task Manager and Service Management”. You should also remove all antivirus components from automatic download. After this, you can try to remove ESET Smart Security; if the system resists, then you should use the Unlocker program.
In addition, you need to clean the operating system registry of files related to the antivirus using the CCLeaner utility. But even after this, some antivirus files may remain on the system, which can affect the operation of the computer.
In addition, there is another way to eliminate this error. To do this, you need to reinstall this version of the antivirus and try to remove it correctly.
Sometimes, when uninstalling an antivirus, notifications may appear that the required file is located on a network resource that is inaccessible. It may also indicate that the resource with installation data is unavailable, and you need to check its existence.
In this case, go to the Start menu and click on Control Panel. Then you need to select “System”, and then “Advanced system settings” and go to the “Advanced” section. After this, you need to visit “Environment Variables”. Here you need to find the TEMP and TMP files and assign them the value USERPROFILE\AppData\Local\Temp or C:\WINDOWS\TEMP. Then you need to delete all information in these folders, restart the PC and try to remove the antivirus utility.
After completing all these steps, you can easily uninstall ESET Smart Security. In this case, it is necessary to pay attention to the errors that arise in order to make a decision on further removal.
Antivirus products sometimes become so embedded in a computer that removing them from the machine can only be done at the cost of considerable effort. For example, this happens with NOD32: if the time comes to replace it with other programs, ESET's development can leave traces on the system - from garbage entries to Windows registry to the entire application folder in Program Files. To prevent this from happening, you need to learn how to remove Eset Nod 32 completely from Windows computer 7, Windows 10.
Regular removal of Eset Nod 32 completely from the computer
Windows provides standard tools for removing unnecessary software - the status of a user-friendly system is obligatory. And from the point of view of applied logic this is the only way How to correctly and most safely remove Nod 32 antivirus software from your computer.
In the "seven" go to the Control Panel from Start.
In the “ten” you can use the quick maintenance menu, which is called up via Win-X.
The system will check the list installed programs and will display a complete list. If Windows has been installed on a computer or laptop since time immemorial, a lot of applications have been installed, this may take some time.
Find the required antivirus product in the list - for example, a trial version that for some reason you didn’t like, or a full-fledged product that you want to stop using. Select it and click "Edit".
After this, the standard installer will start.
It allows you to both remove the Eset Nod 32 antivirus from your computer, and vice versa, restore the functionality of ESET.
Select a reason.
Confirm the operation.
Normally, there should be no antivirus fragments left on the PC. But in practice, the question often arises of how to remove the remains of Yeset Nod 32.
If the standard uninstaller is faulty, files and application settings may remain on the computer. There are various ways to deal with them:
- apply special programs, For example, Revo Uninstaller or its analogues. The advantage of this option is that it checks various places where a forgotten file, registry key, etc. may be located. Some software also allows you to track the features of the antivirus installation, so that later the most in full delete his data (only few people do this in advance);
- independently search and remove possible “tails”. The method allows you to deal with the most obvious files or settings lost by the antivirus. But no one can guarantee that you will really find everything - the logic of the developers is unknown;
- run the utility from the developers themselves, who know best how to remove ESET Nod32 Antivirus from a computer, be it Windows 7 or another OS version. The disadvantages include the potential for data loss, which the creators of the utility directly warn about. So before starting (as with other deletion options at this point), it is strongly recommended to save important data somewhere.
How to remove ESET Nod32 using uninstaller programs
Let's look at the example of Revo Uninstaller. Launch the application and select software that you want to get rid of.
If possible, the utility will first launch the standard uninstaller, then offer to scan the system for “traces” of the program. Select the option you want and scan.
Then review the keys found and delete those left by ESET.
Do the same with folders.
After this, the removal will be completed. When using other tools, the operating logic will be the same or similar.
Manual “stripping” ESET Nod32 on Windows 7 and Windows 10
In this method, it is recommended to first perform a standard uninstallation to stop the protection services running by the antivirus. IN otherwise you risk colliding with the program's self-defense mechanisms. It won't hurt to make a restore point.
Open the Program Files folder and locate the ESET product folder. Next, remove it from your computer. Please note that the system may require confirmation of administrator rights for this action.
Then open the registry editor (Win-R and then regedit) and make a backup - this will come in handy if something doesn’t go as planned.
Search the registry (Ctrl-F) for all mentions of the antivirus. Remove detected items.
Reboot and make sure the system is stable.
Using ESETUninstaller
In addition to the classic method, you can eliminate too tenacious ESET with a “native” tool. Download it from http://download.eset.com/special/ESETUninstaller.exe and remember where you save the file.
There are some differences in how to remove Nod 32 from a computer running Windows 10 and how to do it in Windows 10. In Windows 10, you need to additionally check your network connections before launching the utility. To do this, open the details network connections: via Win-R, run ncpa.cpl.
Next, right click on Wi-Fi connection open properties and look in the list ESET components Personal Firewall or Epfw NDIS LightWeight Filter. If found, mark it and click delete in the same properties window.
After that, start the system in safe mode and run the previously downloaded tool as Administrator. The utility in English will remind you of the need to make a backup and ask you to confirm the deletion by pressing the Latin “Y” followed by Enter.
A confirmation prompt will appear - enter “Y” again. After the "any key" message, press something on your keyboard.
You can reboot - ESET has been completely removed.
Nod 32 antivirus is one of the most popular and its removal very rarely causes difficulties for ordinary users. However, there are times when it is not possible to remove Nod 32 from a computer or laptop. In this case, you can completely remove the antivirus using the following methods.
Removing a program and its files manually
You can uninstall the Nod 32 program yourself as follows:
- Click “Start”, “All Programs” and find the antivirus folder. Press “ESET” and select “Uninstall”.
- The program will perform the removal. However, it is worth noting that the antivirus folders will remain on system disk. They must be removed manually. Therefore, after removing the antivirus, you need to restart your PC and set the view for hidden files. To do this, perform the following steps.
- Click “Start”, “Control Panel”, “Folder Options”.
- A small window will open. Go to the “View” tab and check the “Show hidden folders, files, disks."
- If you have an antivirus installed on the Windows XP operating system, you must manually find and delete the program folders. They will be located at:
C:\Program Files\ESET
C:\Documents and Settings\%USER%\Application Data\ESET
C:\Documents and Settings\All Users\Application Data\ESET
- If you need to remove Nod 32 antivirus from the operating system Windows systems 7 and higher, then the program’s personal folders will be stored at the following address:
C:\Program Files\ESET
C:\ProgramData\ESET
IMPORTANT! If, after activating hidden mode, you cannot find the program folders, it means that the antivirus itself deleted them.
Safely remove antivirus using a special program
In some cases, it is not possible to uninstall ESET. However, the developers of the antivirus itself foresaw this situation and released a special utility. It can only be launched in safe mode.
Uninstalling antivirus software is not an easy task: such software usually leaves a huge amount of “garbage” in the system. The presence of residual antivirus components on your computer may prevent correct installation other applications and even become one of the reasons for the notorious " fatal error" Therefore, if the user is faced with the task of removing Eset Nod32, he must initially approach this process responsibly, and subsequently there will be no malfunctions in the operation of the operating system.
Typical uninstallation
You can remove Eset Nod32 antivirus using the built-in Windows tools, and in a third-party utility. Let's look at a method for correctly uninstalling antivirus software.
The standard algorithm for removing Nod32 from a computer includes 5 main steps:
- creating a system restore point in case of failures during the uninstallation process;
- starting the computer in “Safe Mode”, shutting down the anti-virus software, excluding the program from the autostart list, cleaning the “Task Scheduler”;
- uninstall using the Programs and Features tool;
- cleaning file system– “Program Data” and “temp” folders;
- search and elimination of residual registry entries.
Step one: Setting up recovery
Before removing Eset Nod32 antivirus from your computer, it is strongly recommended that you configure the ability to roll back Windows to its current state. You can implement your plans either in a third-party utility or through the built-in “Recovery” menu. In the latter case, the user must create a recovery point:
![](https://i1.wp.com/xn----7sbbnvnbd8df8h.xn--p1ai/wp-content/uploads/2019/03/kak-udalit-nod32-2.jpg)
Step two: Login in “Safe Mode”
To safely remove Eset Nod32 Antivirus from your computer, you will need to configure protected mode, having first obtained advanced access rights:
- Hold down the Win + R combination, enter the command “cmd” without quotes, tap “Enter”.
- In the console window, enter the “net user” key<имя юзера>/active:yes” without quotes and press “Enter”. Instead of "<имя юзера>indicate the word “Administrator”.
- Close the “Command Prompt”, hold down Win + R at the same time, type the “msconfig” key without quotes in the “Run” window, click on “Enter”.
- In the “System Configuration” window, go to the “Boot” tab and check the “Safe Mode” box. In addition, you will need to check the box “Make... permanent”, since at the time of uninstallation the PC may be rebooted several times. Click on “Apply” and “OK” and restart the computer.
After turning on the computer, you will need to prepare your antivirus program to remove Nod32 antivirus from the computer:
![](https://i2.wp.com/xn----7sbbnvnbd8df8h.xn--p1ai/wp-content/uploads/2019/03/kak-udalit-nod32-5.jpg)
Step Three: Standard Uninstallation
Now you can remove Eset Nod32 from your computer. In order for the uninstallation to be successful, you must act according to the algorithm:
![](https://i1.wp.com/xn----7sbbnvnbd8df8h.xn--p1ai/wp-content/uploads/2019/03/kak-udalit-nod32-7.jpg)
What to do if you lost your password?
If the user has forgotten the password for Eset Nod32, then you can remove the antivirus software using special utility– ESET Uninstaller. It supports almost the entire NOD line, including:
- Smart Security;
- Antivirus;
- Internet Security;
- Smart Security Premium.
Using the uninstaller you can remove antivirus program, which for one reason or another is not displayed in the list of installed software, or NOD with a damaged “uninstall.exe”. And in general this method uninstallation is the safest.
Note! Using this utility may reset the network settings on a computer running Windows 7. It is likely that you will have to restore the Internet connection manually. If you need to remove Eset Nod32 from Windows 10, then in any case you need to deal with the network adapter.
In Windows 10, before the uninstallation process you will need to perform simple manipulations:
![](https://i0.wp.com/xn----7sbbnvnbd8df8h.xn--p1ai/wp-content/uploads/2019/03/kak-udalit-nod32-9.jpg)
To remove Eset Nod32 Antivirus using the comprehensive ESET Uninstaller utility, you will need to follow the instructions below:
![](https://i2.wp.com/xn----7sbbnvnbd8df8h.xn--p1ai/wp-content/uploads/2019/03/kak-udalit-nod32-10.jpg)
Additional tips to help you uninstall an antivirus program using ESET Uninstaller:
- to see the list of available commands in the console window, just enter the command “ESETUninstaller.exe/help” and click on “Enter”;
- to search for Eset on your hard drive you will need the key “/mode=online”, and to search for data on bootable media the command “/mode=offline” will do (may be useful if the uninstaller does not detect anti-virus software on its own);
- To remove the Eset Nod32 antivirus program in “silent mode”, just enter the command “/force” in the console window and tap “Enter”.
Note! To quickly uninstall the antivirus in “silent” mode followed by a reboot, you will need to use the command “ESETUninstaller.exe /force /reboot”.
Step Four: Cleaning the Hard Drive
To completely remove Nod32 in Windows 10, you will need to clean up traces of the specified antivirus software, which may be located on the C drive. To clean your computer you need:
![](https://i1.wp.com/xn----7sbbnvnbd8df8h.xn--p1ai/wp-content/uploads/2019/03/kak-udalit-nod32-13.jpg)
Step Five: Cleaning the Registry
But that is not all. To completely remove Nod32 from Windows 7 or 10, you will have to clean the registry. You can perform this action either independently or using Reg Organizer software. The first method is more effective, but requires patience and time. To clean the registry manually, you need to perform certain manipulations:
![](https://i0.wp.com/xn----7sbbnvnbd8df8h.xn--p1ai/wp-content/uploads/2019/03/kak-udalit-nod32-15.jpg)
Additionally, you should clean your computer using the Reg Organizer utility and optimize the registry using a special tool:
![](https://i2.wp.com/xn----7sbbnvnbd8df8h.xn--p1ai/wp-content/uploads/2019/03/kak-udalit-nod32-17.jpg)
Note! After cleaning your PC, you need to disable extended administrator rights, exit " Safe Mode» and, if necessary, restore the network connection.
Thus, it is necessary to perform the following manipulations:
- Click on the “Start” menu and open the “Command Line” or “PowerShell” console as administrator.
- Type the command “net user Administrator /active:yes” without quotes and tap “Enter”.
- Use the combination Win + R, enter the key for “System Configuration” - “msconfig”, click on “OK”.
- Activate the “Boot” tab, and in the “Settings” section, uncheck the box next to “Safe Mode”, as well as the checkbox next to the “Make settings permanent...” option.
- Click on “Apply” and “OK”.
To restore Internet Protocol settings in Windows 10, you will need to follow these steps:
- Press the combination Win + X.
- In the list of options that opens, select the “Network connections” command.
- Right-click on the “Ethernet” object and call “Properties”.
- Find and double-click on “Internet Protocol version 4 (TCP/IPv4)”.
- In the “Protocol Properties...” window that opens, check the boxes next to the “Get IP automatically” option and next to “Get DNS automatically”.
- Double tap on the “OK” button.
- If you use a static IP address to connect, then instead of the “Obtain an IP address automatically” option, you need to check the “Use the following IP address” option and fill in the information about the network address.
In Windows 7, to restore access to the Internet, you will need to follow the instructions:
- Go to the “Start” menu and select the “Network Connections” section.
- Right-click on the “Ethernet” object and select a special section of the drop-down list – “Properties”.
- Follow steps 4-7 of the previous instructions.
Alternative uninstallation method
You can eliminate anti-virus software not only using Programs and Features and a special Uninstaller, but also using a third-party utility. Programs such as:
- CCleaner;
- Revo.
So, to uninstall software using the Uninstall Tool, it is recommended to follow this algorithm:
![](https://i1.wp.com/xn----7sbbnvnbd8df8h.xn--p1ai/wp-content/uploads/2019/03/kak-udalit-nod32-22.jpg)
To completely remove Nod32 when CCleaner help, you will need to follow the instructions:
![](https://i1.wp.com/xn----7sbbnvnbd8df8h.xn--p1ai/wp-content/uploads/2019/03/kak-udalit-nod32-24.jpg)
Instructions for uninstalling ESET Nod32 products.
In some cases, after removing the antivirus ESET Nod32 using standard means and rebooting the computer, system registry there may be entries left in the operating system that make it impossible to install the product Kaspersky Lab. Therefore it is important to completely delete ESET antivirus Nod32 before installing the product Kaspersky Lab.
Installation Wizard before copying files to HDD checks for the presence of incompatible products Kaspersky Lab software. Entries in the system registry are recognized Master installations as the presence in the system of a full-fledged ESET Nod32 antivirus, however at the same time the product was removed earlier. As a result Installation Wizard asks you to manually remove incompatible software and aborts the installation.
To completely remove ESET Nod32 antivirus and entries in the system registry, use the following methods:
Removal with standard tools Microsoft Windows.
Removal using special utility.
Solution 1: Uninstall ESET antivirus software using Microsoft Windows
1. In the lower left corner of the screen, click on the button Start.
2. Follow these steps:
* For users OS Windows XP:
* Select menu item Control Panel.
* In the window Control Panel Choose a section .
* For users OS Windows Vista/7
:
* Select menu item Control Panel.
* In the window Control Panel left click on the section Programs.
3. From the list of programs, select antivirus ESET Nod32.
4. Follow these steps:
* For users OS Windows XP:
* In the window Installation and removal of programms click on the button Delete/Change(if you are prompted to remove some shared files, click on the button Yes, for everyone).
* For users OS Windows Vista/7:
* Double-click the left mouse button on the program name.
* In the window Programs and components confirm that you really want to remove the program by clicking the button Yes.
5. Starts from your computer.
6. Once the uninstall process is complete, restart your computer.
7. After restarting, make sure that your computer is in display mode hidden files and folders.
8. Find and delete the following folders:
* For users OS Windows XP:
* C:\\Program Files\\ESET
* C:\\Documents and Settings\\All Users\\Application Data\\ESET
* C:\\Documents and Settings\\[username]\\Application Data\\ESET
* For users Windows Vista and Windows 7 OS:
* C:\\Program Files\\ESET
* C:\\ProgramData\\ESET
Kaspersky Lab.
If successful uninstall ESET Nod32 antivirus from your computer, there is no need to complete the following steps.
If any error messages appear or a message appears indicating that removal of ESET Nod32 antivirus was not completed successfully, follow the instructions below to completely remove the product from your computer.
Solution 2: Uninstall ESET antivirus software using ESET Uninstaller utility
Be careful when using the utility ESET Uninstaller, since as a result of the program’s actions, the system’s network settings may be “reset” (static IP address, default gateway, subnet mask, settings wireless communication). After completing the utility and rebooting the system, you may need to reset your network settings under the guidance of your Internet service provider.
To remove antivirus software using the utility ESET Uninstaller
1. Download and save to the root of the C:\\ drive a special utility for uninstalling ESET software (ESET UNINSTALLER (C) ESET, LLC).
2. Restart your computer in Safe Mode.
Running the utility in normal mode may result in the program crashing and an error message appearing.
3. Double-click the left mouse button on the utility icon ESET Uninstaller.
4. Before starting the removal process, carefully read the warning message in the window command line: \"Attention! This utility removes ESET antivirus software in a non-standard way. Your system may be seriously damaged, please save your data. Please remember that once the application is completed, the computer's network connection will be interrupted and you will need to reboot the system. Are you sure you want to continue (y/n)?\” . If you agree to continue the removal process, then enter the command \"y\"(without quotes) for confirmation.
6. Enter the serial number of the antivirus program to remove, which is presented in the list.
7. Press a key on your keyboard Enter.
8. After the question appears on the screen: \”Are you sure to uninstall ESS/EAV/EMSX from this OS?\” To confirm consent, enter the command in the question line \"y\"(without quotes).
9. The utility will take about 1 minute to complete its work, after which the application will automatically close.
10. Restart your computer normally.
Try installing the product again Kaspersky Lab. If during installation Installation Wizard Incompatible company software was again discovered ESET, follow these steps:
1. Install company antivirus software ESET.
2. Uninstall the program using the standard means described above.
3. Install the product Kaspersky Lab.
Article taken from open sources: http://support.kaspersky.ru/faq/?qid=208636474