Flash drive recovery through controller firmware. Free programs for repairing flash drives Recovering a memory card transcend 32 gb
A variety of problems with USB drives or flash drives is something that, probably, every owner of them faces. The computer does not see the flash drive, files are not deleted or written, Windows writes that the disk is write-protected, the amount of memory is displayed incorrectly - this is not a complete list of such problems. Perhaps, if the computer simply does not detect the drive, this guide will also help you: (3 ways to solve the problem). If the flash drive is detected and working, but you need to recover files from it, I recommend that you first read the material.
If different ways to fix USB errors drive by manipulating drivers, actions in Windows Disk Management, or using command line(diskpart, format, etc.) did not lead to a positive result, you can try utilities and programs for repairing flash drives provided by both manufacturers, for example, Kingston, Silicon Power and Transcend, and third-party developers.
On the official website of Silicon Power in the "Support" section, a program for repairing USB flash drives of this manufacturer is presented - USB flash drive recovery. You will need to enter an address to download. Email(not tested), then the UFD_Recover_Tool ZIP archive is loaded, which contains the SP Recovery Utility (requires the .NET Framework 3.5 components to work, will be loaded automatically if necessary).
Similar to the previous program, SP Flash Drive Recovery requires an Internet connection to work and recovery takes place in several stages - determining the parameters of the USB drive, downloading and unpacking the appropriate utility for it, then - automatic execution necessary actions.
Download repair software Silicon flash drives Power SP Flash Drive Recovery Software can be free from the official website http://www.silicon-power.com/web/download-USBrecovery
If you are the drive owner Kingston DataTraveler HyperX 3.0, then on the Kingston official website you can find a utility for repairing this line of flash drives, which will help you format the drive and bring it to the state it had when you bought it.
You can download Kingston Format Utility for free from https://www.kingston.com/ru/support/technical/downloads/111247
ADATA USB Flash Drive Online Recovery
The manufacturer Adata also has its own utility that will help you fix flash drive errors if you cannot read the contents of the flash drive, Windows reports that the disk is not formatted, or you see other errors associated with the drive. To download the program, you will need to enter serial number flash drives (so that exactly what is required is loaded) as in the screenshot below.
After downloading - run the downloaded utility and run a few simple steps for recovery USB work devices.
Official page where you can download ADATA USB Flash Drive Online Recovery and read about using the program - http://www.adata.com/ru/ss/usbdiy/
Apacer Repair Utility, Apacer Flash Drive Repair Tool
Several programs are available for Apacer flash drives at once - different versions Apacer Repair Utility (which, however, cannot be found on the official website), as well as Apacer Flash Drive Repair Tool available for download at official pages some of the Apacer flash drives (search the official website for your specific USB drive model and check out the downloads section at the bottom of the page).
Apparently, the program performs one of two actions - simple formatting of the drive (Format item) or low-level formatting (Restore item).
Formatter Silicon Power
Formatter Silicon Power is a free low-level formatting utility for flash drives, which, according to reviews (including in the comments to the current article), works for many other drives (but use it at your own peril and risk), allowing you to restore their performance when no other methods do not help.
The utility is no longer available on the official SP website, so you will have to use Google to download it (I do not give links to unofficial locations within this site) and do not forget to check the downloaded file, for example, on VirusTotal before running it.
SD Memory Card Formatter for repairing and formatting SD, SDHC and SDXC memory cards (including Micro SD)
The Association of SD Memory Card Companies offers its own universal utility to format the respective memory cards in case of problems with them. At the same time, judging by available information, it is compatible with almost all such drives.
The program itself is available in versions for Windows (there is support for Windows 10) and MacOS and is quite easy to use (but you will need a card reader).
You can download SD Memory Card Formatter from the official website https://www.sdcard.org/downloads/formatter/
D-Soft Flash Doctor
The free program D-Soft Flash Doctor is not tied to any particular manufacturer and, judging by the reviews, can help fix problems with a flash drive through low-level formatting.
In addition, the program allows you to create an image of a flash drive for subsequent work no longer on a physical drive (to avoid further malfunctions) - this can be useful if you need to get data from a Flash drive. Unfortunately, the official website of the utility could not be found, but it is available on many resources with free programs.
How to find a program to repair a flash drive
Actually this kind free utilities there are much more to repair flash drives than listed here: I tried to take into account only relatively “universal” tools for USB drives different manufacturers.
It is possible that none of the above utilities are suitable for restoring the health of your USB drive. In this case, you can use the following steps to find the right program.
Optional: if all the methods described are repaired USB stick didn't work, try it.
Do you have an inoperable USB flash drive or other media and you are wondering which program to choose for recovery?
We have reviewed the most popular utilities. Which of the above programs is right for you and will restore a flash drive with a 100% guarantee?
A one-of-a-kind program will help you pull out all the data Hetman Partition Recovery. It is loved by both beginners and pros for its convenience, speed and advanced data recovery algorithm. Your files will be found and copied even when the FS of the media is no longer available or it is damaged.
jet flash recovery tool- then proprietary utility, which has the maximum simple interface and support for working with Transcend drives, JetFlash and A-DATA. Management of only two buttons, obviously you will like it. Do not forget that the cleared data cannot be restored, so saving information from a USB flash drive will not be superfluous.
If you have a need to always have with you universal program, which can be conveniently applied to home computer, and beyond, we recommend D-Soft Flash Doctor, its platform does not preset, the launch is made instantly on any PC. Software suitable for repair, unlock,
restore the volume of the flash drive and its performance.
If you need to recover SD cards, we recommend downloading F-Recovery SD, which has an effective set of simple options for working with damaged flash drives from digital cameras and others. portable devices. From the point of view of a professional approach to Flash drives, it will be interesting to use the Flash Memory Toolkit, the application contains a whole range of additional functionality that can test flash drives, in addition, the program works with any version of Microsoft's OS.
Recognize the maximum number various types flash drives Flash Drive, among the above utilities, as well as quickly reanimate the performance of drives, the formatting utility and USB recovery Disk Storage Format Tool, which has a very clear and user-friendly interface. Repair program USB flash drives Disk Storage will be able to quickly recover data from damaged partitions hard drive even if flash drive firmware problems are detected.
If no flash drive recovery program has helped, we recommend checking the status of the memory controller using the ChipGenius utility. The program works with USB, micro sd, SD, SDHC and USB-Mpz players from Kingston, Silicon Power, Transcend, Adata, PQI. Further actions to correct errors, restore lost data are only advisable if
flash drive is defined in Chip Genius.
Today it is impossible to imagine a more convenient tool for quickly saving information than a flash drive. For many reasons, the main of which is still the technical imperfection of flash drives, a memory device convenient in all respects in the form of a key fob can still fail. Recovering a Transcend flash drive will be the topic of our story. However, the algorithm of electronic "reincarnation" given below is also effective for miniature "stores" of other brands.
Introduction: interesting theory
Before restoring a Transcend flash drive, you need to understand what we will have to deal with in general. Knowledge of the technical part of the device will greatly facilitate the overall troubleshooting process. However, we will not delve into technical subtleties and fill our heads with various technological terms. We only need to understand the main thing - what does a miniature drive consist of.
How a flash drive works: a look from the inside
- As a rule, the NAND FLASH chip takes up the most space on the board. Depending on the manufacturability of the finished product and its ability to remember (nominal amount of stored data), a particular Flash Drive may have one or more of these elements. If you restore a Transcend 16 gb flash drive, you should most likely know that there are two such NAND chips. It is worth noting that there are three main types of stipulated memory: SLC, MLC and TLC.
- The second most important detail is the controller. For different manufacturers, such a component may differ from similar ones both in terms of typical and software features. This microcircuit performs several functions: it converts the supply voltage, controls LED indicator(if any) and performs the process of exchanging information with the host computer. The controller also contains a special memory area in which the firmware is located - this is a microprogram, with the help of which there is a general interaction with all internal components Flash media.
- There are also SMD elements and a quartz resonator on the board.
After a while, you will understand how much the above information will make it easier for you to recover a Transcend flash drive.
We determine the cause of the malfunction
As practice shows, the main source that causes the Flash-Drive device to fail is the banal software failure, the main "symptoms" of which are:
- The mass storage device is not seen by the computer at all when inserted into the USB connector, but responds to the insertion with a sound signal.
- The operating system defines only a part of the disk space of the removable media.
- The flash drive is recognized by the computer OS, but does not "want" to work with it.
Even in the event that you did not violate the operating rules, and some of us (users) unknowingly abuse the method of removing a USB flash drive from a PC “at a gallop”, it is still not uncommon for a miniature memory device to partially or completely fail due to independent us with you reasons. And yet it would be somewhat reckless on our part to discount the likelihood of mechanical damage, but more on that later ...
Step One: Comprehensive Action Analysis
Do not rush to look for utilities for recovering Transcend flash drives. Perhaps your computer is faulty, or the reason for the inoperability of removable media lies in one of the "whims" of the PC:
- Check if the "problematic" drive works on another computer.
- Disconnect all peripherals from your PC.
- Connect the Flash Drive to one of the main system USB ports ( rear end block).
- Go to syslog events and make sure that there have been no conflicts with the drivers recently. AT otherwise"Flying" software should be reinstalled.
- Clean the system of traces of previously connected Flash devices (USBOblivion utility will help you).
If the above did not help, and the carrier still "does not want" to work fully, proceed to the next part of the article.
Step Two: Checking the Physical Integrity of the Flash Drive Device
Hardware recovery of a Transcend flash drive is not always a difficult process (in terms of its implementation):
- Inspect the "non-working" flash drive from all sides.
- Chips, deep scratches should alert you.
- Look inside the USB connector - perhaps one of the contacts is bent or even dangling, closing the adjacent connector.
In the event that you hear that something has fallen off inside the case, or visual inspection requires a more in-depth analysis, carefully dismantle the flash drive casing frame. Inspect the integrity of the internal soldering, especially at the points of contact between the metal part of the USB connector and the main electronic board.
Step Three: Diagnosing the Memory Device and Collecting Removable Storage Data
Correct recovery of a Transcend 8gb flash drive (including a different volume rating) is possible only when the user knows the exact information about his model.
Namely:
- What type of memory is installed on the Flash-Drive device (its unique ID).
- Which controller the removable media is equipped with (its manufacturer, model ID and firmware version).
You can find out all this data by running the ChipGenius utility on your PC, which you can easily find on the network, after which you just have to download the restorer you need and return the flash drive to "digital life".
Step Four: Direct Flash Drive Recovery Process
In most cases, the JetFlash Online Recovery utility helps. Download it latest version and run it on your computer. By the way, in the process of using this software, you need a constant Internet connection.
So, as soon as the Transcend flash drive recovery utility is launched, and your faulty removable storage inserted into the USB port, press the right extreme button "Yes" and wait until the program performs all "resuscitation" actions.
At the end of the repair process, remove the drive from the connector and reconnect the flash drive.
With a high degree of probability, your Flash-Drive will become operational again.
Finally
As you can see, nothing is impossible! It's not as difficult as you may have thought before. The only thing you should still beware of is haste and rash actions. Do not doubt your own abilities, be sure - and you will succeed!
Imagine modern man without a digital drive is quite difficult. The flash drive is currently a successful portable object that stores a lot of useful information.
The advantage of a flash drive is that it does not take up much space and is accompanied by increased practicality. Even when dropped, it is not always damaged, as was the case with discs before.
Another advantage is that writing the desired content to it is not only faster, but also much easier.
Unfortunately, despite its unique practicality, it may happen that the flash drive stops functioning at some point.
Of course, you can peacefully "say goodbye" to a dead flash drive, go to a store where you can buy a new digital drive.
If it’s difficult for you to get rid of the usual storage medium so easily, then we recommend that you study the recommendations on how to restore a “dead” Transcend flash drive.
Recovery process
Before making minor repairs to a damaged Transcend flash drive, it is important to establish the reason why it failed.
Such a diagnosis can be compared with the treatment of a patient. The doctor also initially examines the patient, establishes a diagnosis, identifies the cause of the pathology, and only after that prescribes treatment.
We also recommend that you "treat" your affected digital media. The program for recovering a Transcend flash drive, which can be easily downloaded using the offers on the network, will help quite effectively with this.
However, it is still useful to initially establish the cause of the failure, due to which you have to "scoop" advisory information.
Causes of failure
In most cases, you have to consider the recovery of a Transcend flash drive due to a banal software failure that users have to deal with quite often.
To confirm that, indeed, a software failure presented such an unpleasant surprise, some tricks allow.
Insert your drive into the USB port and see what happens next. If all your attempts to open the media are in vain, but the computer sees the Transend flash drive, then it is likely that it has undergone a software failure.
You can also suspect this if, when you connect the media via the USB connector, you hear a characteristic sound signal, but you won't see any visible changes on the screen, including not detecting your media when you launch the Computer window.
Also, a software failure is indicated by a factor when the PC sees a flash drive, but not all, but only part of its disk space.
Of course, if you have found confirming "symptoms" of a software failure, which requires the restoration of the Transend flash drive, you do not need to fall into despair, feverishly remember what could be the reason for such a nuisance.
Of course, you could also provoke the failure of a digital media if you neglected the recommendations on how to properly remove the drive from the USB connector.
The reason for the failure may be the fall of the device, strong mechanical squeezing. There may also be reasons that are completely independent of the actions of the user.
Troubleshooting
Those who have established themselves in the idea that the drive has stopped responding to any actions want to find a program for recovering a flash drive.
Indeed, there is a utility for recovering a Transcend flash drive, it is not so difficult to find, download and install it on a computer.
One of the programs for recovering a flash drive
However, initially it is important to make sure that the digital drive is still “dead”. Sometimes it happens that it does not respond on one PC, but it works fine on other computer equipment.
Often a software failure is found on the PC itself, when, for example, the drivers “flew”.
You can also try disconnecting everything from the USB connectors. peripherals, and connect only a USB flash drive. Even such a simple move sometimes makes it easy to fix the problem.
If all your attempts are in vain, we recommend that you inspect your digital drive from all sides. It is useful to pay attention to all the chips, cracks that you find on the case.
It will not be superfluous to look inside the part that connects to the USB connector. Sometimes such a visual inspection is enough to reveal poor internal contact.
Do not be afraid to carefully open the carrier case and inspect it for integrity inside. It is useful to carry out a thorough visual inspection of its internal contents.
You can also try to fix a bad contact yourself, but only if you have special tools for this. If there are none, it is unlikely that you will be able to eliminate even the identified problems.
Only after you have verified that mechanical damage is excluded, you can proceed to the next step, after which the digital media can be restored.
Of course, in this case, you will definitely need a program to restore the Transend flash drive.
To correctly restore a flash drive, it is important to first clarify the type of memory installed on the media, its ID, firmware version, controller ID and other technical details.
Without help special utility Chip Genius in this case, you will not be able to do. With such a utility, you will not only receive information quickly, but it will be accurately presented without errors.
Based on the information received, you can start searching, the purpose of which is a program to restore your flash drive.
The ideal solution to the problem you have indicated is not even a recovery utility, but the JetFlash Online Recovery utility program.
This option is suitable for those users whose computer is provided with constant and reliable access to the Internet.
Do not even tune in to a time-consuming process, your such expectations will be in vain. Immediately after launching such a service program, as well as connecting a digital "dead" drive to the USB connector, the "resuscitation" process will start automatically.
You just have to patiently wait for the process to complete. The only thing you have to do is click on the "Yes" button, confirming your readiness to grant the rights to work with the flash drive to the program itself.
After the completion of the program, the program will inform you about it. Now unplug the flash drive and then plug it back in. If the "resuscitation" process was effective, you will find instantly that your digital drive "came to life". You can again copy, record and other functional user manipulations on it.
If the flash drive has not “come to life”, you will have to say goodbye to it, and get yourself a new digital “assistant”.
So, you were able to make sure that the process of digital media recovery is not complicated. However, such a process needs increased attention and responsibility for every step taken.
