How to remove scratches from iPhone case. How to Remove Scratches from an iPhone Case Check for Strength and Damage
It's a shame, but you can't live with him.
This is the rarest iPhone version 7. It is very difficult to get it. At the start of sales in Russia, there will be a few such devices, and in the next 2-3 weeks a severe shortage is expected for them.
All this is no accident. Apple has focused all its efforts on promoting the glossy iPhone 7 models. And that's why everyone wants them, despite the obvious disadvantages.
We got into a fight with Gorbushka, stole one such iPhone from them and, running away, took several photos. Then we were caught, we had to return everything. But a couple of hours was enough to understand what pros and cons this corpus.
Do not be offended, but my personal opinion: cons more than pluses. Let's start with the good.
Pro 1. It looks great right out of the box.
In just 2 hours of testing, 4 people approached us and asked if this was the seventh iPhone. Everyone wants to hold, try, create their own impression. It is very different from everything that Apple has released for the past 5 years.
Rest assured: glossy iPhone 7 will not help to cling to a chick and raise respect among the boys. But for a couple more months, it will be a topic of conversation at meetings and lead to acquaintances in lines and restaurants.
In principle, for this it can be bought. Once upon a time, the very first iPhone caused a similar reaction.
p..ff 3. Everything, there are no more pluses.
Go minuses.
Cons 1. It scratches incredibly easily.
Just a warning: intentionally did not scratch. Used under ideal conditions. It took 2 hours to leave no trace.
But there are thousands, if not tens of thousands, of evidence to the contrary. Buyers put it on the table, and pick it up with dots and small scratches.
The iPhone 7 in Onyx Black is the first phone in history to be safer to place on the display.
This is an incredibly scratch-resistant phone that is completely unsuitable for real life . The same was the old iPod with a steel panel on the back: it turned into fear and horror at one glance.
When you buy an iPhone 7 in Onyx Black, you don't have to buy a case to protect your phone. Cover needed to hide already appeared scratches. As a result, a month later, instead of fashionable and beautiful smartphone you will have a shabby freak even if you use it with terrycloth gloves. It's a shame.
Minus 2. He gets very dirty from everything in the world.
Like any glossy surface, iPhone 7 in Onyx Black picks up fingerprints even from surgically clean hands. They don't disappear anywhere. You can not take it without getting dirty or leaving at least an imperceptible trace.
After 2 minutes of use, the back panel looks much worse than the matte model. The harsh and shameful truth.
A cover can solve this problem again. But then we personally do not understand the meaning of buying a glossy iPhone, not to mention the difficulties with finding it in stores. You take one to hide it in a case, where it will still be scratched by microscopic dust. At a minimum, the corners will be erased. What is the logic then?
And finally, the most annoying.
Minus 3. You can't even clean it properly.
The glossy surface of the iPhone 7 Jet Black has collected smudges and dust that can be seen from a mile away. Do you think that now you will erase them, and everything will be fine?
Nothing like this.
Any solid particle that gets between the microfiber and rear panel, will leave a mark on the case during cleaning. Every time you wipe such an iPhone, you run the risk of leaving not a stain, but a scratch. Which you can't erase.
If you overdo it with friction, you can leave a bunch of small scuffs. It's kind of creepy, if you think about it.
Circle of hell: dirty, wiped, left a scratch, freaked out, dirty, wiped, scratch again.
Agree, this is not what the buyer of a phone for 85 thousand rubles dreams of. The “I don’t care” argument doesn’t work very well: your pipe will become unsightly very quickly and will look many times worse than the matte version, which is much easier to buy now.
In short, tin.
Legitimate question. Why did Apple make it?
Protective films and glasses for iPhone 7 jet black. Choice, example and decision...
The new iPhone 7 and 7 Plus in Jet Black look great, but many of you already know that this chic color has one big drawback - the iPhone 7 Jet Black is very easy to scratch! According to the reviews of our customers, the smartphone is scratched by "dust" even when in a case.
For this everyone iPhone owners 7 Jet Black, we definitely recommend considering options for protecting the case. Below we describe the most popular ways protection:
1. The most common option is
Pros: Very durable, No pebbles, Easy to install
Cons: Weird stain on apple, edges came off after 24 hours, Covers flat surfaces only
2. The second option is
Pros: Covers 95% of the surface, The corners and ends of the smartphone are closed, Does not peel off
Cons: A small shagreen, Installation takes 10-15 minutes, Before the effect of "Wow" you need to wait a few hours until the moisture evaporates
Think for yourself. Is it worth paying more for glass and not getting full protection? Still, the worn edges with the back surface preserved will look so-so... On the other hand, Armor will protect against scratches and small drops just as well and at the same time completely cover the iPhone 7 case.
Armor provides protection from scratches, can remove glare and cover the entire body of the iPhone 7 jet black
Glass more expensive, gives glare, but transmits a maximum of light, with a successful fall, it protects from cracks.
The iPhone 7 and 7 Plus in the once ultra-scarce variation of Jet Black, which have been so much written about and widely called the most beautiful of all Apple smartphones for at least the last 100 years, as it turned out, remain so for about a minute after they were first removed from factory packaging.
And then their mega-wonderful, but extremely fragile, almost delicate, black coating begins to rapidly lose all its beauty due to the absolute defenselessness against any kind of mechanical influences.
Simply put, scratches “catches” from the slightest touch to something a little harder than itself. Along the way, catching up with thoughts that it would still be more profitable to take metal smartphone with a sturdy case or the same iPhone 7, but in a less sensitive design.
But that, as they say, is not all. Having reached a certain minimum of “scratching”, the luxurious black surface of the 7th iPhone suddenly begins to disappear.
And what is even more entertaining, not without a trace, but by moving into a strange and very intrusive substance that tries in every possible way to stay on the fabric of trousers and other things that a smartphone most often comes into contact with during operation.
That is, instead of the original:
... first it turns out something like this:
Very soon it turns into this:
And do nothing. But quite recently, the iPhone 7 and 7 Plus in Jet Black was almost impossible to find, and many users of those who were tired of waiting for them had to buy a new 7th in a different color.
And, obviously, they now clearly have less reason to regret such a decision. In particular, if they have already seen at least one Jet Black over a week old, the owner of which, wanting to shock the audience with an exclusive new thing for a longer time, did not purchase a cover for it.
And judging by the reviews on the Web, most of those who did wait for their Jet Black did not even think about buying a case. And you can understand them too. It makes sense to spend money on such a "charm" in order to hide it later in a case or case. Now citizens share their impressions and advice on how to extend the shine a little black iPhones 7.
In the meantime, a whole branch has been started on reddit, where the owners, who have already resigned themselves to the irreparability of the problem, post pictures of their JetBlacks, literally worn out by life. They say that even with a repost on Apple's proprietary subreddit and with excellent quality photo evidence (see above). But so far to no avail...
You can easily remove scratches from the iPhone case using an abrasive polish or fine sandpaper. Scratches remain relatively quickly on the back of the iPhone, which can also be repaired quickly and easily. Whether you use toothpaste or sandpaper to remove scratches from your iPhone, you must be extremely careful not to wear off the protective coating on the device's case.
Warning: Use the techniques below at your own risk. MacDigger is not responsible for your iPhone experiments.
Method 1: Remove Scratches from iPhone with Toothpaste
Sounds crazy but toothpaste is a mild abrasive polish that helps get rid of minor scratches on the iPhone.
- Squeeze a drop of toothpaste onto the iPhone case.
- Using a soft cloth, rub the iPhone case in a circular motion.
- Leave the toothpaste on for a minute or two and dry it out.
- Wash the paste off the body with soap or a mild detergent.
For best results, take some time to rub the paste. With this method, you can easily remove minor scratches from the iPhone case. Many people use a similar technique to remove scratches from DVDs or CDs.
When using this technique, make sure that the toothpaste does not get into the connectors or access holes of the iPhone! Failure to use this method carefully may turn on the iPhone liquid indicator and void your warranty.
Method 2: Remove Scratches from iPhone with Sandpaper
You can also get rid of small scratches on the iPhone case with fine sandpaper. The effect will be the same as when using toothpaste, but you must choose the right paper grain. Judging by various recommendations on the Web, a suitable sandpaper grit is from 1200. On the MacRumors forum, they wrote that it takes about half an hour or more to remove all small scratches on the case.
When rubbing the iPhone case, don't use too much force! Remember that you have to polish the scratches on the surface of the device. If you remove the case's protective coating, you will have to resort to a third, more intensive method.
Method 3: Removing Deep Scratches from iPhone
If you decide to completely clean iPhone cases of any scratches, including the deepest ones, you can use wet sanding and completely polish the device, restoring its original shine. This is not the fastest or easiest way, and I would advise you to resort to it only in case of emergency. After applying this method, you will have to say goodbye to the Apple logo and text on the back of the iPhone.
On the MacRumors forum you can find with iPhone (including disassembly of the device). This is the most intense but reliable method, which includes the complete removal of the protective layer from the iPhone, which can be avoided by referring to the first two methods.
Let's talk about the smartphone that is so desired by many and eye-catching -. In addition to the changes and innovations that this model has, we will comment on the so-called test drive. To be more precise, I want to determine how much the case of this brainchild of Apple is prone to damage and how quickly it loses its attractiveness.
Changes and features
The novelty is almost the same as the previously released iPhone 6. Exceptions include the lack of an audio jack (an adapter is included in), two black options appeared, offered instead of a single gray one, a different design of the camera lens, and plastic antenna plugs are present only at the very ends of the case. Front cameras became 7-megapixel. The processor is now faster, but more economical, . RAM is 2 GB. iPhone 7 allows the possibility that the owner will miss it - there is an IP67 certification. However, moisture damage is not covered by the warranty.
The Taptic Engine vibration motor, which appeared in the iPhone 6s, is also responsible for the tapping function in the seventh iPhone. Now it has become sensory, not mechanical. The crisp and noticeable vibration is the result of the Taptic Engine design.
The manufacturer says that the body is made of brushed aluminum. And to create a glossy effect, the surface is anodized. Finishing the process of giving a mirror effect to the case is polishing. Obtained by the manipulations, the deep black color makes the border between the glass and aluminum parts of the smartphone almost imperceptible. Most lovers of everything produced by the “apple” brand, and in particular smartphones, have determined that the iPhone 7 in the “black onyx” color has the most attractive design.
Reasons why they don't want to buy iPhone 7
Many of the potential buyers of the discussed new Apple refused to buy it. The seventh iPhone was called too scratchy. Almost immediately after the purchase and commissioning, the surface of the screen and the body are covered with microdamages. For all its attractive design this model collected a lot of negative feedback that it scratches much faster than the rest. It is worth noting that the screen is immediately covered with fingerprints. in order to avoid this and maintain the perfect appearance of the smartphone, all that remains is to touch it exclusively with gloves.
In many test drive videos of the model under discussion, filmed and posted on the Internet, you can see how easily the surface of the case and iPhone screen 7 is scratched. It is also noted that this smartphone will be covered with scuffs and scratches, get chipped upon any contact with other objects, be it keys, a pen, a comb, a lighter, and so on with which contact occurs.
How to avoid scratches and chips? Of course, given the above points, you can use a case, but the appearance of the seventh iPhone significantly loses its luster. True, there is a good solution to the problem. The Skinomi brand presents a colorless elastic plastic cover that covers the whole body of the smartphone and protects it from scratches.
But this coating has an unpleasant nuance. One way or another, over time, it will become covered with scuffs and will require its replacement.
Strength and damage test
Let's comment on the strength testing of glass, case and other elements of the iPhone 7 in stages.
Screen glass
Regarding the hardness of glass, we can say that out of the maximum 10 units on the Mohs scale, it corresponds to level 6.
Home button
Apple assures that the Touch ID touch coating is sapphire. The increased pressure of the slate knife left no traces. But scratching the hull with a sharp tip caused damage. From this it follows that the coating is not made of sapphire at all.
Finish option “Matte black”
The increased friction with the keys did not cause scratches. But the stationery knife still left marks.
iSight camera protection
And once again we have to state the absence of a sapphire coating. Scratches remain on the glass at a hardness of 6 units.
Impact of fire on the screen
The effect of direct fire on the screen becomes noticeable after ten seconds. In this case, the display is perfectly regenerated, after a few seconds it returns to its previous form. After the disappearance of the black spot, the screen continues to please with bright colors.
bending
Having passed the test of this test, the iPhone 7 really pleased. It turned out that bending this model with the help of hands is not at all easy. The smartphone takes on its former form. Given this, you can be sure - putting the seven in the back pocket of your pants, you can not be afraid that it will bend.
Results
This model can be called one of the most interesting, noticeable and powerful among all that were produced by Apple. In addition, she is one of the confident embodiments of the company's vision for a long time.
But for all their pluses, these smartphones continue to be considered unfinished. In order for apps to use the Tapik Engine or the updated wide color display, they need to be updated. The ecosystem of updated headphones and adapters required for Lighting and wireless audio is just gaining momentum. The best option use wireless transmission audio is offered by Apple and Beats. But the user may not be satisfied with the sound or the way they feel in the ear.
The designers' contribution to the development of the seventh iPhone makes you feel like you are holding a model from the future. Appearance of the discussed novelty of Apple undoubtedly attracts attention and is recognized as spectacular and stylish.
And yet, before making a choice - to buy or not to buy a brand new iPhone 7, you need to think carefully and weigh all the pros and cons. It should be noted that this model is prone to scratching and losing its presentable appearance more than others. After all, everyone knows that Apple products are famous not only for their exceptional design and quality, but also enough high cost products. If a smartphone requires frequent body or glass changes, this may not suit those buyers who prefer to pay attention to value for money. Not everyone is ready to pay big money for a brand and prestige.
Based on all of the above factors, you will be able to evaluate this smartphone and decide whether to buy it or not. Don't miss out available information, consider the technical parameters and draw conclusions.
