Options for activating a SIM card from Beeline. How to activate a new Beeline card How to activate a Beeline tariff plan

Some users sometimes encounter such a problem as a non-working SIM card from a telecom operator immediately after purchasing it at a communication store. People who bought a SIM card from unofficial dealers or at counters often encounter such things. As a rule, in this situation, activating your SIM card can take up to one day, which is important.

Therefore, it is recommended to purchase contracts with a mobile operator directly at the offices or communication stores of a specific company, for example Beeline. True, after the purchase you still have to undergo such an operation as activation of starting balance, but don’t worry, it won’t take you much time.

How to activate starting balance on Beeline

• remove the new SIM card Beeline from the holder and install it correctly in your mobile device, while the latter must be turned off;
• turn on your device, enter the PIN code as necessary and make sure there is a connection and the corresponding antennas on the screen;
• then the operator’s logo or name should be displayed;
• Now, to activate the starting balance, you need to enter the combination *101*1111# on the keyboard of the USSD device, and then press the send call key;
• After this, you can use the device for its intended purpose.

If the SIM card does not work or an error in activation is displayed on the screen, then you should immediately inform the operator about this. You can do this by number 0611 or +7-800-700-06-11 , contact the operator and report the essence of the problem. If you have not yet gone far from the communication salon, then come back and tell the consultants about this - they will help you.

Thus, in order for your new SIM card to start working, you don’t need to make any special efforts, just insert it into your phone and dial a certain command and that’s it.

The information that we will consider in our article today will be relevant for new subscribers Beeline company who have just purchased a starter package and are interested in the question of how to activate a new Beeline SIM card. This is a very simple procedure, however, given that the process of changing the main operator or switching from service from one company to another is not carried out by subscribers very often, all sorts of questions may arise with activation.

How to activate a Beeline SIM card on your phone and tablet

First, you need to pay attention to a very obvious question that will probably arise among many subscribers who are interested in activating the card. It concerns what differences there are between the card activation procedure on phones/smartphones, as well as on portable devices such as tablet computers, For example. Fortunately, there are no special features or nuances here, because the tablets operate under the same operating systems, as smartphones themselves, so the procedure will look identical. It can be done in several different ways, and we will look at them in order and in more detail below.

USSD request

Beeline SIM card activation is carried out via USSD request *101*1111# ;

And the activation procedure itself from start to finish should be performed according to the following scheme:

1. Unpack the box with the Beeline starter package.
2. Take out the card on which the operator’s SIM card is attached.
3. Separate the SIM card from the plastic card and change it into a form factor that is suitable for installation in the device you are using.
4. Install the SIM card into a special slot on your smartphone or tablet.
5. Turn on your device.
6. When turning on, enter the PIN code located on the starter package.
7. Wait for the device to connect to cellular network, and enter the query ( *101*1111# ).

After completing these steps, you can begin to fully use cellular services.

Contacting the contact center

In addition to using a USSD request, if suddenly this option for activating a Beeline SIM card does not suit you, you can also use calls to the customer support service. To do this, call the number 0611 , contact the operator and inform about your desire to transfer the card to the activated state.

Of course, before calling the customer service center, you need to install a new SIM in your phone, turn it on and enter a four-digit PIN code.

How to activate a Beeline SIM card on a phone in the office

If you purchased a Beeline starter package at the official representative office of the company, you can also activate the card directly at the point of purchase. This will save you time and allow you to be 100% sure that the activation was performed correctly.

How to activate a Beeline SIM card for a modem

The last issue we are considering concerns Beeline customers who use a SIM card in a modem to gain access to the Internet with personal computer or laptop. When purchasing a new card and modem, the card must also be activated to gain access to the network. The activation procedure is performed as follows:

1. Unpack the modem and connect it to the USB port of your computer.
2. Install software from the modem to the computer system.
3. Run installed program.
4. In the software interface, pay attention to “Account Management” and click on this section.
5. In the catalog that opens, find the subcategory “Account replenishment”.
6. Find the “Start Balance Activation” button and click on it.
7. After completing these steps, top up your account (if its balance is empty) and start using the Internet.

As a rule, when purchasing a new SIM card in one of the stores owned by mobile operator Beeline, you receive an envelope with the card itself, an agreement and a booklet with some instructions. In most cases, salon employees activate the Beeline SIM card right on the spot, but sometimes they cannot complete this operation for some reason. In this case, you will need to perform activation yourself. This is done in just a couple of minutes.

Activation of a new Beeline SIM card

The procedure for activating a Beeline card is required only for a SIM card that has not been used anywhere before, and it is done as follows:

1. First of all, insert the SIM card into the special slot on your phone and turn it on.
2. If a pin code is required, enter it. It is located under a protective coating on a plastic card to which a SIM card or . Rub off the coating with your fingernail or coin, then read the four-digit pin code. If you entered this code incorrectly several times in a row, you can restore access to the SIM card using the puk code, which is indicated next to the pin code.
3. After turning on your phone, make sure that it is within range of the network. After this, to activate the starting balance of the card, enter the command *101*1111# call. If activation is successful, a special SMS notification will be sent to your number.

You can check activation using the command *102# call. If the response shows the balance of your SIM card, then it is valid.

Activating the starting balance on a tablet is carried out in exactly the same way as on a phone, and on a USB modem you can perform the procedure from the account management menu.

Activation of a blocked Beeline SIM card

You can not only activate a new Beeline SIM card yourself, but also restore access to a previously blocked one. If you need an old SIM card, you can do it in several ways, depending on the reason for which it was frozen:

• If the card is blocked due to non-payment, it is enough to top up the SIM card balance with an amount that will be enough to pay the debt. The balance will have to be replenished, since trust payment does not work on a blocked card.
• You can activate a Beeline SIM card that you previously decided to block using an application sent by fax or handed over personally to the employees of one of the Beeline offices. You need to be prepared for the fact that the number assigned to the SIM card may be unavailable (if you have not used it for a long time).

If for any reason you cannot activate your Beeline SIM card, contact technical support by calling 8-800-700-8000 or use one of alternative numbers written

Articles and Lifehacks

If you plan to access the Internet from a modem, then you should know how to activate a Beeline modem, in otherwise You will not have access to the Internet.

How is the number activated?

After you have purchased a modem and SIM card set, you need to:

• Activate the number. To do this, you can use the combination indicated on the envelope for the SIM card or ask a specialist to perform the activation for you.
• If you purchased a SIM card separately from the modem, then you should write certain commands into it. To do this, you will need to contact the operator at 0611 or visit the nearest Beeline communication store.

How to configure the modem

Follow these instructions:

1. Connect the modem to your PC or laptop. But before that, you need to insert a SIM card into the modem slot.
2. The modem is connected to the PC by inserting it into the USB port.
3. Make sure there are no heavy furniture near the computer, otherwise the modem signal will be weak. It is better to use an open space or be near a window to access the Internet.
4. After connecting the modem it will start automatic installation drivers. You should wait for some time until the installation process is completed.
5. After installing the drivers, you will see the message Run AutoRun.exe. Click on it, then select the folder where the files will be placed, wait until the installation is complete.
6. After you open the modem window, you will need to activate the balance.
7. The application window should now appear in front of you.
8. Check the signal level in the program, if it is low, try to change the place where you are now.
9. If there is no signal, the problem may be a faulty SIM card or poor connection.
10. You can go to the Settings section, where you specify the language, read information about the program, and also select the network in which the modem will operate.
11. Click on the Connect button to establish a connection to the Internet.

You can purchase a Beeline starter package with a new SIM card in the operator’s company store, or in the online store on the company’s website. The user can transfer the old one to it mobile number from another cellular provider. After the purchase starter pack, its packaging with a plastic carrier is opened, where the phone number is indicated, PIN codes and PUK. They must be saved, since the card data may be needed for registration procedures in your personal account and unlocking the card. The article will discuss how to activate a Beeline SIM card on different devices. Order of key points:

The Beeline starting balance is launched on a push-button mobile device, smartphone, tablet or modem. The plastic is inserted into the gadget, after turning it on, the PIN code from the starter package is indicated. Next, you need to visit any website from the device. If the starting balance has not been activated, you will be automatically redirected to the official Beeline website: beeline.ru.
Will open new page, on which you should click the “Start using” option. The system will ask you to quickly register in the system " Personal Area Beeline." After creating a personal profile, you can manual mode change tariff plan, check account balance and traffic balance, detail the account, order Additional services. If you lose your account password, click on the “Forgot password” hyperlink on the authorization page, and the system will send a one-time access code to the subscriber number (linked to the account).

How to activate a Beeline card for a mobile phone and smartphone

The most common way to use SIM cards is on mobile phone or smartphone. After activating the card on such a device, the subscriber has the opportunity to make outgoing calls to any numbers, according to the selected tariff plan. Also available on your phone Mobile Internet GPRS, and for ultra-modern gadgets - with 3G and 4G Internet format.
How to activate a Beeline SIM card on a mobile phone - a pressing question for beginners mobile operator. There are several convenient launch options available:
1. Use a short USSD request. With the help of this program code It’s easy to activate any Beeline SIM card - just type the combination on the keyboard: *101*1111# and press the “Call” key. Activation will be completed instantly and you will receive an SMS notification.
2. Call Beeline support at the number: 8 800 700 06 11 or 0611 . The call must be made from an active phone number (landline or someone else's Beeline number). An inactive SIM card allows you to call only numbers emergency services. After contacting the operator, a new mobile number is indicated that requires launch. Within 5 minutes the number will be activated.
3. If the purchase of the starter package was made at a Beeline store, then activation will be performed on the spot with the help of a branch employee. To do this, you will need a mobile device with an integrated SIM card.

Method for activating a SIM card in a modem

To register a newly purchased number, the subscriber opens the modem device management program from his laptop and selects the “Account Management” category (it is located in the “Account Top-up” category). Next, you need to go to the “Starting Balance Activation” column. If the utility was not launched in automatic mode, it is recommended to disconnect the modem from the network and turn it on again after 2 minutes. Now you need to configure all the parameters manually:
On your PC, go to the “Start” menu and open the “My Computer” widget;
Find the local disk drive named “Beeline”, right-click on it and select the “Open” line;
Find the installation file “Setup.exe” or “Autorun.exe” and start installing the software.

Beeline SIM card activation on a tablet

To work with a gadget running on Android OS, you first need to insert the card into the tablet, then turn it on and specify the PIN code. Open an Internet browser and enter the URL in the address bar: beeline.ru. A registration window will open, where you need to click the “Start using” option. The plastic SIM card will automatically begin its operation and will be available to work with all communication channels.

If the subscriber has with him iPad tablet, then the SIM card is activated in the “Settings” menu, in the “SIM programs” category. The “My Beeline” column and the “Other services” sub-item open. Select the “Activate SIM card” tab and press the “OK” key. This section also specifies the account balance and traffic used.