home > A computer > Windows 10 how to find the build version. How to find the build number and version of Windows: information panel

Windows 10 how to find the build version. How to find the build number and version of Windows: information panel

After installing or updating the tenth version of Windows, as well as any other modification, some users are wondering how to find out the number Windows builds 10. It turns out to be impossible to do this with the simplest regular means. Therefore, to obtain such information, other methods should be used, which will be discussed now.

How to find out the build number of Windows 10: basic commands

Some are embarrassed that it is impossible to view the full in the properties of the computer, and they begin to rush about in search of solutions.

But in any Windows system there's a great detail viewer that many people simply forget (or don't know about). The easiest way to access a complete map of everything that is on the computer in software and in terms of installed hardware is the msinfo32 command, which is entered in the Run console (Win + R). In the main section, you can immediately see the information of interest to us.

You can also use another equally commonly used winver command. True, compared to the previous section, there will be much less information here, however, if we are talking about solving the problem of how to find out the Windows 10 build number, this will be quite enough.

Another option is to use command line. The question of how to find out the build number of Windows 10 with its help is solved by entering the systeminfo command, after which the screen will display necessary information. This command can be used in conjunction with the findstr Build line.

Alternative Method

These are not all the ways to get information by system build number. You can perform almost similar actions even in the system registry editor if you use the HKLM branch, where you need to go through the Software section, using the Microsoft and Windows NT directories for further navigation, to the CurrentVersion directory.

On the right in the window, you should find the CurrentBuildNumber key, which will be the very number that we were looking for. In addition, you can also use the Shell service or find information in the Edge and Cortana settings.

Official build numbers (Pro, Enterprise)

As for the numbering of official assemblies, there are at least a dozen of them on the same Microsoft resource over the past four months. Here are the most basic ones, starting with the Anniversary Update:

14393 - Pro.
14905 - Enterprise, Pro.
14936 - Enterprise, Pro.
14946 - Enterprise, Pro.
14959 - Enterprise, Pro.
14971 - Enterprise, Pro.

It was recently announced that a special build with support for VR devices and helmets will follow soon).

View system build number on mobile devices

Finally, let's see how to find the build number For information, you need to swipe on home screen and open the list of all applications, then select the settings section.

Conclusion

That's all for the basic techniques. In principle, for more detailed information, it is better to use the system information sections, but if the user is interested in brief information, there is nothing wrong with using other methods. They provide less information. Well, what exactly to use (command line, registry or input console), everyone chooses for himself, deciding what exactly is most convenient for him and what type of information he needs.

To find out the edition, version, build, and bit depth in Windows 10, there are a few easy ways. Release means Windows options 10, and this is specifically - Home, Professional or Corporate.

Version- this is the number that changes when major updates are released. Probably everyone remembers Windows XP, where versions were considered SP1, SP2 and SP3, which also changed after the release of major updates. Windows 10 is a little different. The version has four digits, which means the year and month. For example, the first ten released was version number 1507, which indicates the release date, specifically July 2015.
Assembly(build, build) - build number within one version;
Bit depth- 32-bit (x86) or 64-bit (x64) version of the system.

View Windows 10 version information in Settings

The first way is the easiest - go to Windows settings 10 (keys Win+I or Start - Settings), select "System" - "About".

In the window you will see all the information you are interested in, including Windows version 10, assembly, bit depth (in the "System Type" field) and additional data about the processor, RAM, computer name, and the presence of touch input.

About Windows

If in Windows 10 (and in previous versions OS) press keys Win+R(Win is the OS logo key) and enter winter, the system information window will open, which contains information about the version, assembly and release of the OS (data on the bitness of the system is not presented).

There is another option to view system information in expanded form: if you press the same keys Win+R and enter msinfo32 in the window" Run”, you can also view information about the version (assembly) of Windows 10 and its bitness, though in a slightly different presentation.
Also, if you right-click on "Start" and select the item context menu"System", you will see information about the release and bitness of the OS (but not about its version).

Additional ways to find out the version of Windows 10

There are several other ways to view this or that (of varying degrees of completeness) information about the version of Windows 10 installed on a computer or laptop.

Here is some of them:

Right click on Start, launch command prompt. At the top of the command line, you will see the version (build) number.
On the command line enter systeminfo and press Enter. You'll see release, build, and system bit information.

Please! Don't forget to rate and leave a comment.

You can find out the version of Windows 10 using the built-in tools or third party programs, and this can be done even before installing the system, using only one distribution, recorded on a disk or flash drive or mounted in Explorer.

Windows Tools

If the "ten" is already installed on the computer, then the easiest way to see its release, build and bit depth is to open the "About the system" tab in the settings.

Among the information provided, you will see:

Editorial - Home, Pro, Enterprise, Education.
Version - for example, 1511.
Build - item "Building the OS".
Bit depth - 32 or 64 in the "System Type" column.

This "ten" needs an update: version 1511 is outdated, it was released in August 2016 a new version number 1607. Comparable information can be obtained in another way: press Win + R on the keyboard, execute "msinfo32". In the System Information window, you will also find the name, version, and bitness.

If you want to know only the version in order to understand if the system needs an update, then run the "winver" command. A small window like this will appear.

Information about the system can also be found through the command line. Already when you run this tool at the top you can see the version of Windows. If you type "systeminfo" and press Enter, a number of useful options will appear.

Similar information is provided in system registry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion.

The abundance of methods allows you to double-check the information received several times to make sure that it is correct.

Distribution image

If you have on hand ISO image, recorded on a disk or flash drive, you can find out the version by the distribution. Even if the ISO is not written to external media, but is stored on a hard drive, you can see the version of the image by opening it through Alcohol 120%, Daemon Tools or UltraISO. Use the built in Windows utility DISM. It will show the build number and version directly from the distribution.

"F" is the letter of the mounted image. If the largest file was install.esd, then enter it instead of install.wim. In the case of a multiboot image (x86 and x64), you should alternately enter commands like "dism /Get-WimInfo /WimFile:F:\x86\sources\install.wim /index:1" and "dism /Get-WimInfo /WimFile:F :\x64\sources\install.wim /index:1".

License key

The key can only be found installed version Windows 10 and get information about the system that was installed by the manufacturer. This is done using the ShowKeyPlus program. It does not require installation and shows the necessary information immediately after launch.

On Windows 7 and Windows 8 it was enough to know license key. But to him the Volume Activation utility Management Tool found a version operating system. But there are no such programs on Windows 10. On the Microsoft forum, it is advised to contact technical support with such a problem.

Each installed system there is a version and build numbers that imply making a this version any changes or adding new features. Surely some would like find the build number of windows 10 your computer or laptop. But why do you need to know this at all? Installation software for older versions and builds it goes quite smoothly, but things are a little worse with the newest builds.

If you are worth automatic update, for sure the system has already been updated more than once to the latest version of the assembly. As a result, new features appeared, parameters changed and, possibly, errors appeared.

How to find the build number of Windows 10

In general, there are several options for recognizing the assembly number. Naturally, we will analyze them all. Let's consider everything point by point.

Step One - System Settings

To enter the system settings, press the key combination Win + I and in the window that opens, go to the section "Update and Security".

On the tab "Center windows updates» go down and click on the item "OS Build Information".

You can also go the other way. Open the system settings, go to the "System" section. On the left, go to the “About” subsection and all the same Windows characteristics appear.

Step Two - Windows Information

There is another way to find out the Windows 10 build number. For example, open the Run window using the Win + R combination and enter the command winter .

In the system information, you will see both the system version and the build number.

The same command can be entered in Windows search and then the result will appear, clicking on which will open the same window.

Step three - command line

You can find out information about Windows using the command line. Launch CMD and enter the following command:

systeminfo

It can also be written in the PowerShell console.

The latest versions of assemblies can be found on the official Microsoft website.

Step Four - Using the AIDA64 Utility

Download the AIDA64 program to your computer and run it. In the "Operating system" section on the right you will see the item "OS Version".

Programs similar to AIDA64 where you can find out the build number of Windows 10: CPU-Z, GPU-Z, EVEREST and many others.

Step Five — System Information

The Windows operating system has a tool called "System Information". Getting there out of dozens is easy. Enter this phrase in the search, click on the result. A window will open with the required information. Look at the line "Version".

Thus, knowing latest versions assemblies installed on your PC, you can easily search the Internet for information about latest updates for the system, new changes. If they interest you, then you can immediately update.

Hello admin! How to check the version release, installed on my Windows laptop 10 ?

I have been using Windows 7 Home since 2010 and recently upgraded to Windows 10. The operating system for me new and I can't even figure out which versionWindows 10 I updated to 1511 or until the final build 1607 and what is my system release now - Home or some other.

How to find out the version of Windows 10 installed on your computer or laptop

Hello friends! If you need to know version and release Windows 10 installed on your computer or laptop, that is, two very simple ways, let's look at them in detail, and at the same time find out that Windows developers 10 is called the version of the operating system, and what is the release (there are also"OS Build" and "System Type" ), in these concepts, many users are confused.

Windows 10 editions are different set apart from each other key functions and have such names - "Home", "Professional", "Corporate", "For educational institutions". For example If you have Windows 10 Home edition, then it is missing some features that are in Windows 10 PRO.

Windows 10 version denotednumber (often the OS version is called an assembly), for example - Windows 10 PRO ( version 1607 ). The version of Windows may change after a major update is released. It will be possible to determine by the version of the operating system whether you received this update or not. If not, then you can.

check the version and Windows edition 10installed on your computer or laptoppossible in two ways.

Method 1.

Left click on the start menu

Select "System"

"About the system"

In the "System" window that opens, we see the release installed on our Windows computer 10. In my case, this is Windows 10 PRO.

Also we see the version of the operating system - 1607 and "Building an OS" - 14393.187 , often referred to as one word"assembly".

In the "System Type" value, we see what bitness our Windows 10 is (64-bit or 32-bit).

Scroll the scroll wheel down and click on the "System Information" button

A window will open « View basic information about your computer”, where you can also find out the edition of Windows and other important information about your computer: System type (64-bit or 32-bit), processor model, installed volume random access memory etc.