What is Jailbreak and how to install or remove jailbreak on iPhone (iOS). What is iPhone Jailbreak? What is jailbreak

Designed to jailbreak iOS 9.3.3 / 9.3.2. The tool supports all 64-bit Apple devices including iPhone 6s/6, iPhone 6s Plus/6 Plus, iPad Pro and iPod touch 6G. MacDigger publishes detailed guide on working with Pangu.

The new Pangu utility is the first tool of its kind to jailbreak iOS 9.3.3. It can only be used in an operating room environment Windows systems, a version for Mac is promised in the near future. Jailbreaking iOS 9.3.3 is performed almost entirely in automatic mode with the exception of manual installation certificate from Chinese developers.

Pangu's iOS 9.3.3 jailbreak is considered "semi-tethered". This means that the jailbroken device must be put into jailbreak mode again after rebooting. However, unlike its “tethered” counterpart, the user only needs to launch the application from the home screen mobile device, and not connect the device to the computer.

Jailbreak iOS 9.3.3: compatible models

• iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Pro, iPad Air 2, iPad Air 1, iPad mini 4, iPad mini 3, iPad mini 2, iPod touch 6G.

Jailbreak iOS 9.3.3: incompatible models:

• iPhone 4s, iPhone 5, iPhone 5c, iPad 4, iPad 3, iPad 2, iPad mini 1, iPod touch 5G.

Supported firmware:

• iOS 9.2, iOS 9.2.1
• iOS 9.3, iOS 9.3.1, iOS 9.3.2, iOS 9.3.3

Requirements:

• Backup of all mobile device data.
• iPhone, iPad or iPod touch with iOS 9.3.3-9.2.
• Latest version of iTunes.
• Utility from Pangu.

How to jailbreak iOS 9.3.3 using Pangu:

Step 1: Download new version Pangu by following this link. You will also need current version iTunes programs ().

Step 2: Run PPhelper as administrator. The firewall may report unknown application, allow the program to make changes.

Step 3: After launching the utility, press the green button.

Step 4: On your computer desktop you will see a utility icon whose name begins with “PP”.

Step 5: Run it as administrator.

Step 6: On your iPhone or iPad, go to Password/Touch ID & Passcode and make sure you have Passcode or Touch ID security turned off.

Step 7: Go to iCloud section–> Find iPhone. Turn off the Find iPhone device discovery service.

Step 8: Activate Airplane mode on your iPhone or iPad.

Step 9: Connect your iOS device to your computer and wait until the program detects your device.

Step 10: On the next page, click the green down arrow button.

Step 11: The arrow will turn into a circle, at this point you need to wait. Be patient.

Step 12: After some time, the utility will prompt you to specify your Apple ID. Enter your details and click the green button.

Step 13: Wait a few minutes until the PP icon appears on the home screen of your iOS device.

Step 14: Open on iPhone or iPad app Settings –> General –> Profiles and controls. device.

Step 15: Select a profile and click the Trust button. In the window that opens, click Trust again.

Step 16: Launch the Pangu/PP app from the home screen of your iOS device and click OK.

Step 17: Now click on the circle:

Step 18: Lock the device by pressing the power button once. After a few seconds, a push notification will appear on the lock screen.

Step 19: A warning message appears indicating that your device's memory is full. Everything is ok, this means the Cydia installation stage. You can unlock your device and run the Pangu/PP app again.

Step 20: Your gadget will automatically reboot, after which you will see the Cydia icon on your home screen.

Step 21: Launch Cydia and wait until the file system is prepared. Congratulations, you can now use iOS 9.3.3 with jailbreak!

Just now, suddenly, a team of hackers from the PanGu group released a utility for jailbreaking iOS 8 - iOS 8.1.x. Unexpectedly... So, the utility currently only works on Windows and there is no support yet in English In the utility interface, everything is in Chinese, and the worst thing is that Cydia is not yet available. We checked the functionality of the jail on a brand new iPhone 6 with iOS 8.1! Everything went well, but Cydia is not installed yet. I think a new utility with Cydia support and in English will be released in the near future.

If you updated to firmware 8.1 over the air, via OTA, jailbreak will not work! Therefore, we connect the phone to the PC and flash iOS 8.1 again via a cable.

How to Untethered Jailbreak iOS 8 - iOS 8.1 on iPhone, iPad and iPod Touch Using Pangu8

Step 2: Be sure to follow backup copy all data on your device from using iTunes. Although hackers say that no problems or bugs have been noted during installation yet.

Step 3. Disable the “Find iPhone” function in the Settings - iCloud menu. We also disable the password on the device, if it is set.

Step 4: Connect your iOS 8 - 8.1 device to your Windows computer using a USB cable.

Step 5. Launch the downloaded Pangu8 program.

Step 6. Wait for the program to identify your device.

Step 8. Now wait a few minutes for the jailbreak to complete. It is important not to turn off or disconnect your device from your computer. Ready!

TOPIC UPDATE: Just a few hours have passed, and Saurik has already added compatibility with iOS 8 - 8.1 to Cydia and now it can be installed on a device jailbroken using PanGu 8. Unfortunately, Chinese hackers have not yet updated their utility, so the installation will have to be done manually. You can download the updated Cydia from Jay Freeman's website. To install it, you will also need the OpenSSH package, which can be downloaded after the jail using the same PanGu8 utility. As soon as the PanGu team includes Cydia in their installation package, we will notify you and publish the new full instructions! Follow our blog...

Semi-tethered jailbreak using Yalu can now also be done on iPhone 6s (iPhone 6s Plus) and iPhone SE. Exploit developer Luca Todesco announced support for new devices on his Twitter blog. The updated tool can be downloaded from the official page or using a mirror.

As before, jailbreaking using Yalu is only possible on devices running iOS 10.1.1 or lower. Unfortunately, iOS 10.2 firmware does not have support for hacking, since it contains several vulnerabilities from Apple developers.

List of compatible devices with Yalu:

• iPhone 6s and iPhone 6s Plus (on TSMC chip)
• iPhone SE (on TSMC chip)
• iPhone 7 and iPhone 7 Plus
• iPad Pro

By the way, the hacker promised to add support for other i-devices in the future, but has not yet done so, since this area is not a priority for him. And there is a good reason for this. The fact is that the exploit has a serious glitch, which is why Luca Todesco does not recommend using it for all users - exclusively developers. Until the hacker fixes this error, he will not add compatibility with other devices. Therefore, Yalu is still in beta status.

Let us remind you that with the help of Yalu you can do a semi-tethered jailbreak of iOS 10 - iOS 10.1.1, that is, after each reboot of the device you will have to first launch the Yalu application, only then you can use the Cydia store. detailed instructions How to hack iOS 10 on Windows and Mac is on our resource. You can also check out

Jailbreak is such a familiar unfamiliar word, and so much is said about it, but it is not entirely clear what it is. For many, this term is associated with hacking, pirated content and the obligatory damage to a smartphone. Some people shy away from this word as if it were leprosy. Yeah, well, it’s not worth it...

After all, there is nothing terrible in this procedure - it is just an official hack of the iPhone operating system, allowing the user to return the wings that were so cruelly clipped by Apple developers. And the question of the sinfulness of jailbreaking an iPhone can be safely left for forum verbiage.

What is jailbreak? Jailbreak, also known as “jail”, is an official procedure that opens free access to file system on Apple devices, and thus expanding their capabilities. “Official” does not mean that Apple personally initiated this proposal, but, in any case, at the legislative level it cannot prohibit it. All she can do is threaten freedom-loving users with the absence of technical support and warranty repairs, but even then, according to the laws of the Russian Federation, in the event of a breakdown, not through the fault of the client, the smartphone is required to be repaired under warranty. So the intimidation is purely symbolic.

Moreover, it is absolutely not difficult to roll back this procedure, returning virginity to your sensory pet. In the warranty service, everything will look as if there was no Jell-O and along with it tons of pirated content.

There are two types of jela - tied and untethered. It is better not to consider the first one at all. The fact is that a linked phone only works for the duration of one session, i.e. after turning it off, it goes away, and then it needs to be done again. Moreover, the system begins to completely lose self-control. And after turning it on, it either does not start at all, or only works partially - some applications are “silent”. But it comes out almost on par with the new version of iOS.

But it is better to wait for the release of an untethered jailbreak. The name speaks for itself - it is not tied to a session and gives a more sustainable result, working seven days a week. And it does not cause problems in the system. Usually.

Pros and cons of jailbreaking

Well, what exactly is this “prison escape” for and how much do they pay for it? Not at all, the main thing is to erase traces of the crime in a timely manner. Okay, it’s not good to cheat, and there are disadvantages, so after weighing all the pros and cons, the user himself will make an informed decision.

So, why do you need jailbreak:

1 Pirate, she is the one, the one and only! After the escape, everything is possible - all the illegal software is at your disposal, especially if you install the AppSync utility. Although honest guys and girls don’t necessarily have to use illegal content, Jel doesn’t exist only for that; 2 Ability to download various tweaks from the Cydia application and change the iOS interface at your own discretion. Apple doesn't like this very much. But in fact, why can’t a user customize a personal smartphone to his own taste?; 3 New features that should initially rightfully belong to the buyer of the gadget. This is the ability to exchange data via Bluetooth with users of any devices from different manufacturers, read files from flash drives without restrictions, use any adapters, download files of any size via 3G connection; 4 A distinctive feature of JEL is that it gives direct access to the file system, which means you can add your own files for Russification and change program settings. For example, you can launch some application or toy that did not want to work before.

Well, why not do this? useful action? What is the argument made by the fighters for the rights of Apple and all disadvantaged authors?

So, here are the disadvantages:

1 Jel can negatively affect the operation of all applications - they begin to crash. Although they worked fine before. Apparently they smell the enemy; 2 Problems with updating - the official function does not want to update software through pirated sites. And switching to a new version is also problematic - the unwanted jel will be demolished along with all the pirated content. Although sometimes this can be solved by creating a backup. And will a new jel be written for latest version- question. No, it will be written, but when... For the seventh iOS, they waited three months; 3 Tweaks (applications for settings) can have a very negative impact on the operation of the entire system, take it out of balance, so carefully thought out by the developers, and even lead to its inoperability. It is possible, especially if the tweak was made through the wrong place. In addition, two perfectly good tweaks can simply interfere with each other. Therefore, you need to know when to stop and not turn the operating system into a garbage dump. These tweaks can also be written by hackers to steal data. This is already a problem - you will have to install “left” software at your own peril and risk. This is the price of freedom. Well, or not install it at all - well, this is a jailbreak...; 4 Moreover, if hacked, you can provoke the deletion of all data - so it is better to make a backup copy in advance; 5 And, most importantly, the smartphone becomes outlawed and leaves forever from under the warm wing of Apple. No one will ever repair it for free! Come on - don't be so scared. Of course, Jell is not the best thing you can do with your favorite iPhone, but if something happens, you can roll everything back, and even if the breakdown is not related to the software, it must be accepted for warranty service, at least according to the laws of the Russian Federation.

How to find out if your iPhone is jailbroken

How to check if there is a jailbreak for iPhone 4, iPhone 5s - or for any other model?

Cidia http://www.cydiaimpactor.com/ is a pirated application that can turn over a junked iPhone with its head sometimes wisely hidden. The shortcut is placed in a separate folder or hidden using special tweaks. But the program itself does not disappear anywhere, so it is easy to determine through a search.

You can check this using iFunbox. It is installed on the computer, after which the iPhone is connected, and in the device line you need to look if there is the word “Jailed”. If it is there, it means there is no gel. The absence of this word should be annoying, especially if tomorrow you take the toy for warranty repair. After all, the model is probably already jailbroken.

How to install jailbreak on iPhone

It should immediately be noted that for each iPhone model, or rather, that iOS versions, which he supports, there is a way to carry out jel. If the method is chosen incorrectly, you can easily ruin the device. Therefore, if you are not sure that your favorite iPhone 5s or higher does not support this phone, it is better to use third-party services. Or install exactly the version described in the instructions for the Jel. There is probably no need to explain how to update the “axis”.

Jailbreak iPhone 3gs

The method works on iOS 6.0, but may not work correctly with version 6.1. Moreover, the installed hack will be tied and after each reboot the process will need to be carried out again. But the problem is solved by installing p0sixpwn from Cydia.

Algorithm of actions:

• The Redsn0w 0.9.15b3 utility is downloaded.
• The iPhone is connected to the PC, after which Redsn0w is launched (as an administrator).
• In the window that opens, select Advanced > IPSW > IOS 6.0 IPSW.
• Return to the main page and click “Jailbreak”.
• Select Install Cidia and click Next.
• The smartphone is entered into DFU mode (you need to confirm the action), and the program itself brings the JA process to the final stage, reporting the execution of the linked JB.
• Then click OK and the process is completed manually - based on the instructions.

Jailbreaking an iPhone 3g follows similar instructions (without step 3) and the only difference is that iOS 4.2.1 “breaks”.

How to jailbreak iPhone 4s and iPhone 5s

The order is as follows:

• Download and install the Pangu utility. As already said, it works on iPhone 4 and iPhone 5s, or rather, with operating systems which they support.
• The program starts, the iPhone is connected - if the system is suitable, the treasured Jailbreak button lights up.
• Now you need to click on it - after which the smartphone will be prompted to change the system date. The program will tell you exactly what needs to be done.
• A Pangu shortcut will appear on your smartphone - you need to launch it and continue “breaking”. Or rather, the program will do it itself. Once completed, it will turn into the Cidia icon.

Yes, it’s all like this – very, very difficult.

Jailbreak on iPhone 6/7

As you can see, an iPhone 4 or iPhone 5s is, of course, not difficult to hack. What should owners of later versions of iOS do?

And everything has already been done for them. So, first you need to download the files:

• Yalu ipa file https://mega.nz/#!W10jGaIZ!_Ph1J327fNlVPIS6Bq-cWVF…
• Cydia Impactor

• Now you need to connect the device to the PC via the latest iTunes;
• Cydia Impactor starts - it’s better to first save files from the iPhone to the cloud;
• The device is selected.
• Yalu is dragged into the Cydia Impactor window.
• A window will appear asking you to enter your Apple ID information. It's better to create another account first.
• The action is confirmed - after that you need to go to the settings in the device management section and allow the developer account to be trusted.
• Now you can launch the mach_portal application that appears and rejoice. But only until the next time you turn it on, because then you will have to launch this application again. Jel is semi-attached, there is no other one yet.

How to remove jailbreak from iPhone

How to remove Jailbreak? It's very simple. You just need to update your operating system via iTunes. The updated iOS removes Jailbreak from iPhone without a trace. Before you remove it, it is better to first make a backup copy of everything on your smartphone to ICloud.

Conclusion

Yes, everything is quite simple and does not require a lot of time or intellectual energy. The only question is: why buy an iPhone and “break” it when you can buy a less strict device?

Yes, Apple is about quality, it is about status, after all, it is the brainchild of Steve Jobs himself! This is truly a cult thing. Therefore, you should buy it and then “break it” - no one will see it, and the outwardly fashionable gadget will remain the same. Overall, there's a lot to think about here.