home > Internet > How to set a password for an archive. How to put a password on a folder using the WinRAR program Adding files to a password-protected winrar archive

How to set a password for an archive. How to put a password on a folder using the WinRAR program Adding files to a password-protected winrar archive

Open the Advanced Archive Password Recovery archive:

You can open a password-protected archive by brute-forcing the passwords, unless of course you remember the password. Depending on the power of your computer and the password you set (password complexity), it will take time to complete the selection. If the key is light, for example, consists of three characters, then you can open it in 5 minutes; if the password exceeds 6-8 characters, then you can try it for 4 days. But in the end you will still be successful and you will open the archive. Personally, I tried 2 times and they all justified brute-force password cracking.

How to brute force a password?

There are many programs on the Internet for brute-forcing passwords, some paid and some without paid, they are limited in the number of characters in the password. Let’s say they won’t sort through more than 4 characters; paid ones work without restrictions and add some other useful functions. I searched for a forgotten 12-character password for 4 days, my computer did not turn off while searching. But it doesn’t matter since the computer is powerful, I could perform other operations I needed. I am working with the Advanced Archive Password Recovery program which can be downloaded from the official Elcomsoft website and many others useful programs to select passwords. To be honest, I performed two searches on it and they all ended in success.

Advanced Archive Password Recovery Review:

Let's see how to work with Advanced Archive Password Recovery. After installing the program, the installation is no different from other program installations. After launch, you will see a window with a lot of settings, but don’t be alarmed, I’ll tell you how to set up the work to select a password for the archive:
In the picture above, I have indicated with numbers what settings will be needed to brute force the password. 1.) By clicking on the button you will be asked to select the archive to open. 2.) You can either enter the line in which the path to the archive is written yourself or select the archive as in under number 1. 3.) What method to search for the password (find out) if you want to use brute force, which is much more effective, then use brute-force. 4.) Two tabs on which settings will be made, now we are on one of them. 5.) You can select all of the symbols or numbers that may be present in the archive; the search time depends on this. 6.) You can leave which letters or symbols to start searching with as is if you have no idea what the password might contain. Next, go to the second tab under number 4 labeled Length:
On the Length tab, under the number 2, select the smallest value that can be the password characters and the most a large number of characters in the password. Click under the number 2 Start, thereby starting the process of selecting a password for the archive.

Download the programs mentioned in the article:

ARCHPR from the official website.

ARCHPR from Yandex disk.

Forgotten password The Accent RAR Password Recovery program will help you open the RAR archive.

How to quickly open the password for a rar archive that you forgot:
1. The password for the archive can be opened different ways, let's say brute force passwords is when each number and letter is substituted in different combinations. In this article we will decrypt using the resources of your video card, yes, you heard right, it can also perform calculations and calculations. To do this, we need a program, you can download it from the official website, there are many more programs for opening office documents. But no matter how beautifully it was written, you still have to wait even if you have a super powerful computer.
2. It’s as easy as shelling pears to use, everyone knows how to install, click everything in the normal order and follow the instructions of the installer wizard, where to which disk and all that. After the first launch, you have a few days to use the non-activated version, but don’t be happy, even though they will let you use it for a few days, it will be cut down. That is, it can only remember passwords that are made up of 3 numbers, but you need 12 numbers, well, everything like that is called trial version. But the program is worth buying, at least in pairs with different genders!
3. After installation, the program must be launched like the others and in the first window you will be asked to select the file that we will decrypt.
4. Under the number 1, by clicking on the button, you will be asked to select a password-protected archive. I only had one archive for the experiment and I didn’t know the password for it. I could have made the archive itself and protected it with a password, but I didn’t want the test to be really fair.
5. After a little analysis, the program will show that your archive is password-protected and the following decryption form will be applied to it:
6. After clicking on the next button at the end of the window, in the next window you will be offered some options on how to decrypt the password, using brute force, using your dictionary, a selection mask, leaving the brute force method as it is, it’s 3x like that. But it is created by default, and if you click the next button at the very bottom, this is the method that will find out your password.
7. They showed how to decrypt and other settings and now the program will begin decrypting. At the very bottom you will be shown the approximate time to completion and the speed of scanning using the brute force method or another method you choose. All you have to do is wait:
8. If you look at the program settings, you will see that the program does not take the resources of the processor itself, as in other programs, but the resources of the video card. This can be seen in the picture below:
9. Next, you can select your dictionary through which the password will be selected.
10. Unfortunately, not everything is decided by the program, and a big responsibility falls on your computer, how powerful it is. To be even more precise, how powerful video card in your PC. To select passwords in a matter of seconds, you need to do as in the video below:

An archive of files is created mainly for their compression and enlargement free space on the hard drive, but sometimes an archive is created because it is possible to set a password on it to protect information. This can be done with many archiver programs, but we will next look at how to set a password for a WinRAR archive.

The program allows you to set a password for a WinRAR archive only at the time of creating the archive. But if the archive file is very large, the creation of which took quite a lot of time to compress information, you can put a password on rar archive and without repackaging it. We will look at how to do this at the end of the article.

To set a password for an archive using WinRAR, you need to open the archiver, find the files or folders to be archived, and click on the menu item "Add" or in Windows Explorer after right-clicking on the archived files, select the item in the menu "Add to archive…".

In the window that appears "Archive name and parameters" press the button at the bottom right "Set password…".

When entering a password, you can check the box "Display password as I type" to see the entered password instead of dots, and also enable the function "Encrypt file names", which will not allow you to read the file names in the archive before unpacking it.

After entering the password, click "Ok" in the previous window and the archive with the password will begin to be created. Now, when you try to open the archive, a window will appear asking you to enter a password.

Now let's see how to set a password for an existing archive. As mentioned earlier, the WinRAR archiver does not offer to set a password for an existing archive, so this archive must be re-archived with special parameters. You need to do the same as when setting a password when creating an archive, but in the window settings "Archive name and parameters" in the column "Compression method:" you need to install "Without compression". This will allow you to avoid wasting time on re-compressing the information, and the file will simply be rewritten with a password set on it.

There are many cases when a user has an urgent need to protect his personal information from third parties. Of course, one of the best ways to ensure the protection of your files is to write them to an external drive and then lock it in a Swiss bank safe deposit box.

But, unfortunately, not everyone has such an opportunity and it is not always convenient or advisable. Therefore, other options should be taken into account, such as protecting your personal archive complex password. Below, step by step and with illustrations, we describe all the necessary steps on how to put a password on a WinRar archive.

Preparatory activities

Before proceeding directly to the instructions on how to set a password, the user will first be required to complete the following three preliminary steps:

Firstly, if your PC does not yet have the WinRar application, then you need to install it from official resource. Users have the opportunity to immediately purchase it for personal use, by paying a small amount, or you can use a demo modification of the utility (this version is valid for more than one month, so the computer owner has plenty of time to solve his priority tasks).

Installing the downloaded distribution will not cause any difficulties even for beginners, since a special installer will guide you step by step through all stages of installing the program. The user is only required to agree to the terms or adjust some settings.

Secondly, it is recommended to come up with a complex access code in advance that will be set to protect the archive data. Practice shows that this seemingly simple stage often takes a significant amount of time, because it is desirable that the password be at least eight characters long and contain various categories of symbols, letters and numbers.
Thirdly, write down the code you came up with yourself on paper, since even the worst and shabby notebook is always better than the best human memory.

This small final stage of preparatory activities must not be neglected, otherwise there is a high probability that if you lose your password, you will lose it along with it. important information, saved in the archive.

To crack an archive protected by a secure code, you need a special software(it should be noted that it is paid) and also very powerful Hardware computer. And even if all these conditions are met, the “hacker” will need to spend a considerable amount of time trying out all possible options.

Instructions

To set a password for a winrar archive, you need to perform the following sequential steps:

Note: in earlier versions of the application, this button is located in the “Advanced” tab.

Often there are archives that were encrypted with the WinRar archiver program. This encryption method can be easily bypassed by advanced users. In this article I will tell you how to hack an archive encrypted with a password. And this does not require any special skills, just one small, easy-to-use program is enough.

How to hack an archive using Advanced Archive Password Recovery

Advanced Archive Password Recovery is a program that will help you decrypt any archive corrupted by WinRar. It is easy to use, has a Russian interface and is fast.

Before hacking the archive, download this program to your computer and install it. I have attached an activation key in the archive, which will be needed during installation.

Advanced Archive Password Recovery works simply. It tries different password combinations until the correct one is found. When the correct one is found, a message appears about this. It may take the program a significant amount of time to find the correct password, depending on its complexity. To speed up the process, you can narrow the selection range by specifying, for example, only numbers, only letters, a length range, or other parameters.

Before hacking the archive, run the downloaded program and make basic settings.

So, in the “Character set” settings block, select which characters you want to use in the selection. For example, I’m going to open an archive that I password-protected myself, and I know for sure that the password contained only numbers, so I check the “All numbers” box.

On the avi1 service you can purchase active and live followers on Instagram at one of the cheapest prices on the network, also available for ordering: likes, views, comments and bots on Instagram

If you know what the first and last characters of the password were, you can enter them in the “Start with” and “End with” lines. For example, I remember for sure that my password ended with 3.

Then you can go to the “Length” tab and set the maximum and minimum length of the selected password. Let's say from 1 to 4.

Setting length and character ranges will help reduce password guessing time. The number of selected keys is significantly reduced, which makes the result appear faster.

So, the settings are set. Now, to hack the archive, you need to click the “Open” button at the top, select the archive on your computer and wait for the program to select the password itself. If the password is complex, it will take a long time.

At the end you will see a message indicating the archive password. All that remains is to use it and you can unpack the files.

From time to time we all have to deal with password-protected archives created in the WinRAR program. Whether we download them from the Internet or package them ourselves.

But for the most part, we know how to enable password protection only during the process of creating an archive, having selected certain parameters before doing so. You know that the most popular archiver can do this easily and reliably.

And if the archive has already been created and has a large volume, and the user forgets to password protect it at the beginning of creation, then the only option for correcting such an error, at first glance, is a long procedure for extracting files and re-archiving them, but with the addition of . In fact, such a procedure does not need to be carried out, since adding a password to an already existing archive is easy.

You do not need to extract the files for this, but simply follow all the steps according to the instructions below. This will also allow you to significantly save your precious time.

PASSWORD FOR ARCHIVE

IN context menu Click on “Open with WinRAR”.

Go to the "Tools" menu and click on "Convert archives".

Click on the “Compression...” button.

In the window that appears, click on the “Yes” button.

Wait for the conversion process to complete.

This completes the instructions! Please comment.

P.S. You will be taken to a list sorted by category. computer advice on the blog. We want you to take an active part in our Facebook group, the link to which you can see at the top right.