How to increase the screen resolution on a laptop. Best Tips: How to Change Monitor Screen Resolution

Increasing the screen resolution is not an easy procedure, which often forces the user to take help from outside during its execution. Often there are situations when a laptop user accidentally changes the screen resolution (matrix) by pressing a combination of hot keys, or, for the convenience of work, selects the one that suits his needs.

Ways to increase the resolution of the matrix on a laptop

note! Each specific model has its own "ceiling" of the highest resolution. It is determined by the maximum value that is supported by the laptop matrix. Attempts to increase the resolution to values ​​that are not supported by the matrix may lead to its damage and further incorrect operation. By the way, laptop matrix replacement is one of the most expensive PC repairs.

Changing the resolution with a system utility

Each operating system has a utility for adjusting the screen resolution;

1. In order to use it, go to the Desktop, right-click in any free space.

You can also use the following alternative and no more complicated path: "Start / Control Panel / Display / Screen Resolution". This path to the utility may vary slightly depending on the OS version you are using;

3. Select the most appropriate resolution by moving the slider.

It is far from always possible to achieve the desired in this way: in most cases, the user does not have the opportunity to select the maximum resolution due to the fact that the system cannot recognize the technical parameters of the installed matrix.

Configuration via graphics card software

1. Before performing the described procedure using video card drivers, check if they are installed by opening the command line with the Win + R key combination and typing the devmgmt.msc command in it.

3. If the OS does not have the necessary software, you need to install the video card driver from the disk that came with the laptop, or from the official website of the video card manufacturer.

Be sure to restart your PC after installation.

4. After making sure that the video drivers are available, go to the "Taskbar", which is located in the lower right corner of the screen.

5. Find and open the graphics card software, then select the "Screen Personalization" section and start selecting the appropriate resolution.

Modern systems, starting with Windows 7, can independently choose the optimal value for the screen, so basically you should not worry about this. It turns out that there are people, most likely beginners, who ask the question of how to change the screen resolution, and it doesn’t matter what operating system is on and what computer. The instruction will be individual for everyone and I hope it will help you.

There are a couple of other points that I will touch on here. Let's say you have a monitor with a resolution of 1920x1080 or higher. It is known that it will not work to set the value of 800 × 600 for it. Why? But because you will see screen distortion, since the values ​​do not correspond to the physical values ​​for the screen.

Let's start from the depths, namely from the seven. Using this particular operating system, you can not worry that the value will not be selected accurately. Although sometimes the value is set lower than necessary, so the knowledge that can be gleaned from this guide comes to the rescue.

The article skipped moments on the topic, and the article itself is quite useful. If interested, you can read.

For manual setting screen resolution, you need to right-click on an empty space on the desktop. A menu will appear where we select an option "Screen resolution".

One of the subsections of the control panel called "Display Settings" opens. Here we see three options:

• Screen;
• Permission;
• Orientation. (To read: )

Naturally, we are concerned about the second point. The first one is responsible for choosing additional monitor, and the last one is clear. Open the options tab "Permission" and choose the maximum. In my case - 1366 by 768. Most likely, the corresponding word will be opposite the maximum resolution - Recommended.

The note: it is worth paying attention to the moment when you cannot change the value of the screen. The fact is that you must install the drivers for the graphics adapter without fail. As a result, you can change the screen value not only from the control panel, but also in the video card settings. Below I will explain how to use these settings. (Drivers are usually installed automatically).

How to change screen resolution in Windows 10

The specified operating system has the same options from the control panel, but you still need to find it. We will not bother, but let's see how to do this from the options menu.

As in the first case, we press the right mouse button on the desktop and select the option "Display Options".

A window opens with the "System" subsection. There are many tabs there, but we are interested in "Screen". On the right side of the window, we observe several options:

• Night light mode - best for reading at night;
• Scale and layout- what we need;
• Multiple displays - we can connect additional monitors.

Finding the parameter "Permission" and change to the maximum value, it will be marked as "Recommended".

In addition, you can specify the text size in applications. The standard value is 100%, but the value can be changed to 125%.

Unfortunately, specified method the only one in ten. In the control panel, the "Screen" section was removed and you can change the desired settings only through the "Options" menu. That's how bad they are, these Microsoft people.

Using the graphics adapter utility

I'll show you with an example NVIDIA graphics cards because I don't have AMD.

When we click on the desktop with the mouse to call the context menu, we can see the following items:

• Graphics Specifications (Intel HD Graphics);
• NVIDIA Control Panel.

Both of these sections have a lot of settings, but only the first one includes screen resolution options. Let's look at the example of Intel HD. If you have this software, then run it.

Perhaps the icons on the desktop are too small or large, we will help you figure it out how to change screen resolution and adjust the size according to the user's desire. Resolution matters in regards to graininess, placement active elements, display quality of images/animations and other manipulations with the computer.

Today, the seven remains one of the most popular systems, therefore, for it, we will initially consider the technique:

1. Installation is performed via RMB on the desktop.
2. Then you should select the "Screen Resolution" option.

1. Next is resizing.
2. When ready, click on Save.

For Windows 10

Most affordable way change resolution - use the modernized settings interface, where there is a Screen section. To go to it you need:

1. Run RMB on the table and activate the "Screen Options" item.
2. Go to additional options.

1. In this section, you can select a suitable resolution and save its selection.

See also: How to activate Windows 7? Answer in this article

The alternative is to use the Control Panel.

1. Through Start, go to the control panel and activate the Display item.
2. In the menu on the left, select "Resolution Settings" and set the optimal setting for each device.

1. Click Apply to preview the changes, click Save to make the final selection.

The change procedure is similar previous versions system, it is enough to make RMB on the desktop and activate the "Screen Resolution" option. Then you should expand the "Resolution" menu, which presents a choice of different display methods available for your monitor. If multiple screens are synchronized, it is recommended to set the resolution for each one individually.

If you do not know the appropriate value, you can move the slider in different directions and watch the elements change. The system determines the optimal value for the computer based on the technical parameters and marks the item with the message "Recommended".

If you increase the resolution, the interface will get more space, and all elements will be reduced. The action allows you to increase the clarity of the picture and reduce the visibility of pixels. On the contrary, when the value is lowered, the icons are enlarged, if they are difficult to see from afar, the resolution is reduced by 1-2 positions.

After setting the value, all that remains is to click OK, in which case the action will be applied, the user will have the opportunity to view the result, only then click Save.

See also: optimization Windows work 10 — detailed description by this link

You can change the resolution through the home screen:

1. You need to open the Charm panel in the lower right corner and go to Settings.
2. Click on PC and Hardware.
3. Select Screen.
4. Adjusts to the correct size.
5. Save the actions by clicking on the appropriate button.

For Windows XP

A simple way to achieve the goal:

1. Execute right click on home screen and activate the Properties option.
2. In a new window, go to the Options tab if another page is open.

1. By moving the slider, the optimal indicators are determined and click OK to view the changes.
2. Save is clicked only after the final selection.

How to change the screen resolution in the game

The easiest way for a novice user to change these settings is to go into the game and in the options section there is almost always this setting. It is enough to set the right choice from the listed options and enjoy excellent quality.

From time to time there is a problem that after changing the resolution, the program stops running or always appears with a black screen, although there is sound and you can perform some actions. Also, in a number of other situations, you need to change the resolution without logging into the game.

See also: What to do if the tablet freezes? See

How to change screen resolution without opening the game

There are methods to achieve the goal, but the main difficulty is that each game is programmed differently, respectively. universal way does not exist.

There are 4 main methods for achieving the goal:

1. It is necessary to change the parameters in the files with the game. For settings always done separate file with the name Config, Settings or UserProfile and other speaking names. They contain basic settings user. The files themselves are contained in the directory with the game, mainly in top level hierarchy, but sometimes you additionally have to go to BIN folder or others.

• To edit a file, you need to open it with text editor, a standard notepad is usually sufficient. This is done using RMB on the file and hovering over "Open with".
• It is worth doing a search in the text by holding Ctrl + F and entering the word - Resolution.

• The found line indicates the extension separated by a space, it should be replaced, if the line is missing, it should be added.
• You need to specify a value lower than that allowed on the monitor, usually for stationary PCs - 1920x1080 or 1280x1024. For laptops, 1366x768 or 1280x720 is often found.

1. Some games nearby with a launch file have an additional launcher that allows you to set settings before starting the game, you should check for such a file with the .exe extension.
2. Using the file properties, you can set the value to 640x480 - this will allow you to start the game if any failures occur, and inside it already set an adequate value.

• To perform the procedure, you should find the file from the game and make RMB, then selecting "Properties".
• Then you need to go to the "Compatibility" tab.
• Set selection next to "Use screen resolution 640x480".

• The changes are applied and an attempt is made to start the game.

1. You can change the required values ​​​​through the registry, but due to the lack of standards for the location of the game, it is difficult to say where the setting will be located. It is advisable to find information on the forum, you can also use the search and brute force to determine the place. Usually the name of the parameter indicates the purpose of its use. After finding the file, double click and you need to change the value.

An incorrectly set resolution will cause a lot of inconvenience during any actions, it is especially difficult to play normally. The techniques from the article are designed to fix the problem at the system level and separate application.

If you still have questions on the topic “How to change the screen resolution? Step-by-step instruction”, then you can set them in the comment

The quality of the image that the user sees on the screen of a computer or laptop directly depends on the ratio of pixel sides and the number of dots per unit area, set parameters output devices graphic information. Each device, each laptop or home desktop computer (monitor), tablet or mobile phone capable of displaying graphics in the quality specified by the parameters. AT default settings, on a single device, the quality is set at which the image becomes clear with the transfer of shading effects and other "goodies" of the graphics. Or, on the contrary, it reduces the quality, increasing the rate at which the file is loaded into the cache.

Screen resolution is responsible for image quality

Changing the resolution in the standard way

You can change the screen resolution in windows 7 (the most popular OS today) in the traditional way, which is available in every build of Windows.

The easiest way to navigate to the permission configuration management window is through the desktop by clicking the right mouse button. In the appeared context menu(depending on the build of the OS) the item "Personalization" or "Properties" is located.

Great way to change screen resolution

The main difference from clicking on the “properties” item is that personalization provides functionality related only to graphical characteristics, without a menu for configuring desktop controls.

But this applies only to the seventh version. In the subsequent menu item "personalization" will only change the desktop background or the color scheme of windows. Otherwise, you can adjust the screen resolution in windows 7 in the same way as in other older assemblies.

If the context menu contains the "properties" item, then when you go to this item, in the left part of the window that opens, select the "parameters" or "permission" section.

In the workspace of the window that appears, find the drop-down menu with options for quality settings for the device on which you want to make changes. On laptops with a diagonal resolution of 1920x1080 or 1366x768 is better than a resolution of less definition. The first time the OS boots up, the computer is set to standard resolution. Due to the lack of hardware drivers, it can be low - 800x600 pixels.

Format and type

Asking about the difference in pixel ratio, understand that the possible uses of resolution depend on the format of the visible part of the monitor, on its working area. Do not confuse the screen format with its type. The types differ in the technology of arranging pixels on the matrix - TFT and IPS. Both the first and second options are used to create screens of various formats on all types of devices.

The screen resolution of the monitor does not always allow you to form the desired workspace. For convenience, sometimes several monitors are combined into one desktop. This approach is used by software developers, video operators and those who want to use the available resources to the maximum.

To increase the screen resolution on a laptop, not only standard means Windows, but also additional applications that come with the drivers for the video card or are initially installed on the laptop by the developer.

The program for changing the screen resolution has an intuitive interface and the section for managing the resolution is called in most cases "parameters"

If you change the screen resolution in a special program or application, then in system settings changes do not always take effect immediately. A reboot is required in 20% of cases.

What to do if the screen resolution does not change

If the screen resolution does not change on windows 7 using the quick access method through the desktop and its properties, then you should use the control panel. You don't even need a mouse to do this.

Press the Windows icon on the keyboard;

Select the item "control panel" (mandatory displayed in all operating systems);

Find the "screen" section and go to the settings item. The next step is the "change" button;

Choose the one you want and enjoy the image.

The standard screen resolution does not allow you to fully work with graphic applications to create vector and raster graphics, since in most cases it is only 800x600 pixels.

The screen resolution of 1920×1080 is optimal for comfortable work. If in the standard version this aspect ratio is not presented when choosing settings, then codecs and drivers for the video card should be updated.

In the case where the user's priority is given to watching video in good quality, widescreen videos, set up the monitor as follows:

Monitor flicker rate to maximum;

Resolution 1366×768 pixels;

No image filtering.

Most affordable option for auto tuning monitor for different purposes - an intuitive program that can be selected from the free access in the list of applications for the monitor of a specific manufacturer.

On some assemblies of the OS, the menu and the general architecture of the system and interface have been greatly changed. Most subject to change Windows system 7. Pirates pretty much mocked her, even in places more than XP. Therefore, you can find out the screen resolution in windows 7 by entering the control panel and selecting display properties from the menu.

WATCH VIDEO

In general, you can set up the monitor in a matter of minutes, if you are well prepared for this - install all the necessary utilities and the right software. Using applications and utilities from unknown developers is not as dangerous as, for example, programs for creating or editing audio or video. Screen customizers take up very little space both on your hard drive and in random access memory. But some of them can seriously puzzle the video card, so you need to carefully study the settings in full, and not switch to the standard "default" set.

Now you know how to change the screen resolution. Ask questions to experts.

To make the computer screen settings as comfortable as possible for the eyes, you need to know how to change the monitor screen resolution personal computer or laptop.

Screen resolution is an indicator that determines the clarity of displaying all icons, pictures, that is, graphics in general. It is important to determine what will be best for the monitor.

Changing the extension using built-in OS functions

The higher the resolution, the better the clarity of the display. For example, a 22-inch display will have a standard one, which is 1680 * 1050, which is optimal and maximum for this screen.

All available sizes are available in the settings, it is advisable to choose the largest of the proposed ones.

Follow the instructions to change the image resolution of your display:

• Go to desktop operating system. Click on it with the right mouse button and select the screen settings item, as shown in the figure below;

• In the window that opens, you can adjust the size of text, icons, and other elements of the system in real time. You can also adjust the screen orientation. To go to the selection tab, at the top in the search bar, enter the word "permission";
• Select "change screen resolution";

• Click on the drop down list as shown in the picture and select the default recommended. Save your new settings.

Important! It happens that the recommended resolution is larger than the display. That is, the size of the final image does not match the size of the screen, so some elements of the desktop may disappear from the user's field of view. Adjusting the monitor will eliminate this problem. In the selection options, choose not recommended, but one that fully displays all desktop elements. In this case, all graphics must be clear.

Several common types of expansion and their corresponding display sizes:

• 1024*768 - perfect for screens that are 15 or 17 inches. In a display with a resolution of 1024 * 768 pixels, the color depth is 16 bits;
• 1280 * 1024 - designed for displays whose size is 19 inches;
• Types of monitors with a size of 24 inches most accurately transmit the image at a resolution of 1920 * 1080. All displays with these parameters are FullHD.

Adjusting the screen refresh rate

The higher the refresh rate of the display, the correspondingly better quality Images. That is why, in addition to size, you need to pay attention to this parameter. To change the refresh rate, follow the instructions:

• Go to the control panel. In the search box, enter "Screen" (without quotes);
• In the suggested search result, select the item that is responsible for the screen refresh rate, as shown in the figure;

• Set the refresh rate to the highest. This will eliminate possible intermittent flickering of the monitor.

NVIDIA software

How to find out the right resolution for your display? This can be done on the official website of the manufacturer or in the instructions that come with the device.

On the boxes of monitors and laptops from Samsung, there is information on how to set the correct resolution and what to do if the real one does not match the declared one.

Via special program, which is preinstalled on all computers equipped with an Nvidia family graphics card, you can also adjust the resolution of the custom monitor. Follow instructions.