home > Internet > Modem beeline zte mf 823. Firmware and unlock modem ZTE MF823D

Modem beeline zte mf 823. Firmware and unlock modem ZTE MF823D

Description of a simple way to flash and unlock the ZTE MF823D modem. The need for this arises for certain reasons. For example, you purchased a Beeline operator modem, but after some time, disappointed in the quality of the connection, you decided to switch to Megafon. There are two exits here. Or buy a Megafon modem, or remove the Beeline blocking. Unlocking is necessary in order for the modem to work with a SIM card from a third-party operator. After the unlocking procedure, it will be possible to use the services of any major mobile operator.

Most affordable option, how to unlock 4G modem ZTE MF823D. We connect the MF823D modem to the computer in a USB connector without a SIM card! A web interface window will open in the browser, which is necessary for managing the device. In the address bar we see: http//:192.168.1.1 or http//:192.168.0.1, or http//:192.168.8.1.
The next step is to put the modem into ports mode. It is done like this. Copy the command to the address bar of the browser:

http://192.168.0.1/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY

If necessary, insert the desired number into the command. Suppose if it was http//:192.168.8.1, then we enter the same in the command. Press Enter, go to this address. If everything was done correctly, the modem will switch to ports mode, displaying the result:FACTORY:ok response in the browser window.

This can also be done using the dc-unlocker program.

Or run executable file SCSI.exe, located in the attached archive https://drive.google.com/file/d/0B_NrIMeqHIaYMUk5NjZiRExWME0/view?usp=sharing

Another way to unlock ZTE MF823D

Follow steps 1 and 2 from the first instruction. Then, by double-clicking the mouse, run the file_DVA.cmd with the name of your modem, located in the folder that you created on drive C. Give permission to the SCSI.exe file to execute. Select the diagnostic COM port in the Device Manager - it should open automatically and that's it. The modem is in operation network card and broken.

Unlock method for ZTE MF823

Unlocking the ZTE MF823 is practically no different from the previous one. Follow all the same steps in the same order and you will get an unlocked ZTE MF823 modem.

Unblocking online

It is also worth mentioning ways to unlock modems through online services. However, it is worth noting that unlocking there is paid and not all modem models are supported. In order to use this service, you will need the following information about your device: modem model, IMEI and Firmware.

This article describes how to unlock the ZTE MF823D 4G modem. The presented methods are simple, clear and effective for flashing and unlocking ZTE modems. Write in the comments who managed to unlock your device, and who had problems. Attach screenshots and detailed description.

Unlocking and flashing a modem, whether it be Beeline, MegaFon, MTS, Tele2 or any other, despite the simplicity of the action, is a responsible step. And yet it's worth it - the reward will be complete freedom of choice the best rate any of the cellular providers.

a 3G/4G

Firmware motivation - in changing the tariff of a cellular provider without the need to buy a different one for each of them modem.

The fact is that in pursuit of additional profit, the cellular company blocks the use of SIM-cards of competing operators. In a good way, there are no physical reasons to prohibit the use, for example, in modem e, sold by Beeline, SIM from MegaFon, MTS, Tele2, Yota, Rostelecom and regional operators. All modem We use the same 3G and 4G standards (UMTS-900/2100 and LTE-800/2600, where the number refers to frequencies in megahertz). And here there is an opportunity to “untie”, for example, device Huawei E1750 or router ZTE-MF90+ from MTS or Beeline.

Methods of "unlocking" cellular modem ov and routers

There are three approaches to unlocking:

unlock without firmware;

firmware with unlocking already done;

changing the firmware version - then unlocking is performed separately.

Here are completely free and proven methods. You don't need to buy any "credits" and other things - modem We and routers, if desired, are unlocked “for free” and after unlocking they work flawlessly for 10 or more years.

How to unlock and flash modem s from "Beeline"

Don't make yourself any trouble! Often you can limit yourself to a simple unlock modem and without reflashing it. This is the easiest way - your device will be working on 100%, because the highest goal of the subscriber is to get rid of the "binding" to the operator. Firmware only makes sense when modem or the router supports more high speed, but its “native” firmware prevents it from overclocking (software limit of the maximum connection speed, “sewn” into the current version of the software, cannot be disabled in any other way) - this was the case, for example, in the first LTE- modem ah Yota and in 3G- modem e Huawei E1820.

How to unlock and flash modem ZTE MF180 ("Beeline") for all SIM cards

When connecting to a PC USB port for the first time modem installs the program "USB- modem Beeline is an application imposed by Beeline.

It is unlikely to be useful - other programs are used

Previously, it was called BID ("Beeline Internet Home"). The size of the program window is set rigidly, closes everything on the desktop Windows desktop. Uncomfortable.

You can unlock the ZTE MF180 by replacing its native program, for example, with MTS Connect Manager. Before flashing, the versions of Beeline and MTS may not be compatible, which is why you need to replace the PCUI.VN file in memory modem a. To flash ZTE MF180 you need:

correct PCUI.VN file;

firmware "MTS Connect-Manager";

QPST software package.

You can easily find it on the Internet.

Use a laptop, preferably with Windows XP SP3. Do the following.

Download and install the QPST app.

Download and extract the necessary firmware files.

Insert the ZTE MF180 into a free USB port on your laptop and wait until the regular Beeline program ends.

Go to the dispatcher Windows devices("Start - Control Panel - System - Device Manager") and check the virtual devices modem and ZTE MF180 for which the appropriate drivers have been installed, in particular, the ZTE Diagnostics Interface. Remember which COM port this device “sits” on - it will come in handy in QPST.

Disgnostics Interface COM port

Run the QPST program and add the ZTE Diagnostics Interface port to it.

The application is ready to find the modem port

Click the button to add a new port.

Select your ZTE DI Port

A new device header is available with your COM port. Launch the QPST - EFS Explorer component ("Start - Programs - Accessories - EFS Explorer").

EFS Explorer identified a port with a modem

Confirm port selection - files will open your modem device.

There should be pcui.vn, because of which the modem does not accept other people's SIM

At the root of flash modem and there should be a PCUI.VN file - if it is not there, you will have to add it. Find and drag it to this window - PCUI.VN will be copied to the drive modem a.

Close EFS Explorer and run "MTS's" firmware (original file DL_MF180_MTS_RU_EUV1.00.03.exe). AT Windows versions Vista and later "flash driver" from "MTS" runs with administrator rights.

It is important that the PC power is not reset

After you clicked the download button, device will be sewn. This will take up to 20 minutes. Don't touch anything!!! Interrupting the firmware can ruin the modem!

You have successfully reset your modem

After the firmware is finished, remove the "Beeline" program from the PC and use modem point with no restrictions unlimited tariffs any operator. When reconnecting modem a to USB port"MTS Connect Manager" will be installed.

Remember to set up network profiles by checking the APN with the appropriate operator. If you have active access to the Network without settings, you will not need APN settings.

ZTE MF180 firmware for specific networks

Instead of "MTS Connect Manager" you can download any software, be it MLT ("MegaFon" of Tajikistan), Egyptian Etisalat or something else at your discretion. Sometimes they do this - in their firmware there may be a "treated" PCUI.VN - then they change it to our Russian one.

If you are flashing under Yota - keep in mind: on " modem Nom "tariff Yota will not let 3G- modem s to the 3G network from MegaFon! This is the policy and marketing of the company, alas. No one has yet been able to bypass this limitation directly. You need a "smartphone" or "tablet" SIM - on these tariffs you will be able to use the 3G network, but you need to change the IMEI and fix the TTL. It’s easier with other operators: they don’t have a tariff exclusively for modem devices (only for 4G), you can also use the 3G network (where there is no 4G yet) without much difficulty.

The main drawback of the ZTE MF180 is that there is no HSUPA technology (high-speed uplink up to 5.76 Mbps). Only 384 kbps are available for transmission from the subscriber (limited WCDMA rate according to the 3G specification) and downstream speed (HSDPA) of only up to 3.6 Mbps, therefore these modem You are already considered old.

Flash and Unlock ZTE MF823D

This device popular so far- its mass start of sales came in 2015 along with ZTE MF90(+) routers. These models support up to 42 Mbps downstream (DC-HSDPA+) and up to 5.76 Mbps upstream (HSUPA) on 3G networks, and up to 75 Mbps (both ways) on 3G networks. 4G (LTE). Using them is a joy: the Internet channel becomes more symmetrical and allows you to satisfy the appetite of the most sophisticated subscribers who consume hundreds of gigabytes of traffic every month, and it is also useful when working via the Internet, where you need to urgently send attachments by mail and transfer video from objects and video chat (video conferencing). ) in good quality.

Modem ZTE MF823D is not controlled from the program, like its predecessors of the past, but from any browser at m.home/index.html (or 192.168.0.1 by default): configuration and monitoring are carried out through a web interface, thanks to which you can local network connected to the internet from this modem and, manage its settings. Its firmware does not put in Windows system separate application, and after installing the drivers, ZTE creates only a label "Beeline Internet". But this does not mean that it will succumb to unlocking worse. Do the following.

Download and install the driver package for ZTE devices (archive with the ZTEDrvSetup program).

Insert ZTE MF823 into an available USB slot and open "My Computer". Modem will be defined as a virtual CD-ROM - give the command: right-click - "Eject".

Open the already familiar Windows Device Manager and look for three unknown devices and ZTE MSM Technologies.

Launch any browser, for example, Firefox and enter the address http://192.168.0.1/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY - the device will respond: ("result":"FACTORY:ok")

At the same time, the installation of unknown devices will begin - as in the case of the old ZTE, these will be three devices: ZTE Diagnostics Interface, ZTE Proprietary USB Modem and ZTE NMEA Device.

Remember the port number of the ZTE Diagnostics Interface (let it be COM8) and download the unlock file (the "cured" original is known as "diag1F40_F0AA.bin" or something like that).

Run command Windows line with administrator rights and give the commands: cd \ (if the file is saved on the C: drive) and copy /b diag1F40_F0AA.bin COM8 (the port number on which the modem). Application command line notify you that the file was copied successfully.

File copied

Install a terminal emulator, such as the Putty application, connect to the ZTE Diagnostics Interface port, and enter the command AT+ZCDRUN=F. Modem will again become available as a CD-ROM, only now it will be unlocked.

Connect to your port and enter your commands

Everything! Modem ZTE MF823 unlocked. Go to its web interface and write down the settings for all operators.

Unlock modem s Huawei

Unlocking Huawei is much easier than ZTE. You need an unlock code calculator - you can unlock dozens of models with it:

E137,
E171,
E173Cs-1,
E1732,
E173,
E1815,
E272,
E303,
E303 HiLink,
320s(E3121),
E3131(420d),
E3276,
E352,
E353,
E355,
E357,
E362,
E363,
E367,
E368,
E372,
E392,
E397,
E398,
E586,
E5776 (821FT),
E5776s-22,
E589,
E589u-12.

Do the following.

Download, install and run the "NCK Huawei Code Calculator" program (search, for example, by the phrase "lookdevices.ru huaweicalc_win32.rar").

The program will select the unlock code

Enter IMEI and click "Calc."

Copy the v201 that appears to the Windows clipboard, install in modem "foreign" SIM and connect it to the computer.

Wait for the unlock code prompt to appear and paste the copied v201 code from the clipboard. Confirm your entry.

After a few seconds, the code will be accepted and the SIM card will register on the network, modem switch to 3G/4G network. Everything! You can use any network with any SIM - the unlock code is saved once, device never ask him again.

Don't create unnecessary problems for yourself! Flash modems for all SIMs at once - and let them give full return, without interfering with changing the tariff in case of something! Good luck!

The article published below easy setup ZTE-MF823D 4G Beeline modem and Upvel UR-354AN4G router

We unpack the router and connect our pre-configured modem to the USB socket. We transfer the network card of the computer to the mode of automatically receiving settings from the network. Turn on the power button of the device. Over time
the network card on the computer receives the network settings (by default, routers use the network address space 192.168.10.x, the router itself has an address in this network 192.168.10.1 here at this address and the software for managing and configuring the router and devices connected to it is available.

We connect to the router, by default the user is admin, the password is admin

After connecting, the router interface will become available, but in English:

We switch to Russian, the language support buttons in the upper right corner.

We set the data in strict accordance with those shown in the figure and save the settings by clicking the save button. The modem is configured and ready to distribute the Internet access service, there are small details left:

1. The modem receives a service from a network with an address space of 192.168.0.x, has its own management console available at 192.168.0.1, and it remains for us to make the final settings in it.

2. Since by default I wanted the Internet to rise automatically when the power button of the router is turned on, we set the settings in accordance with the above picture

and click CONNECT:

The address of the modem control console (not the router, but the Beeline modem) will be saved in the browser tab, it will come in handy for the future)))

That's all, enjoy!!!

In subsequent articles, instructions will be given for upgrading the modem software to work with any cellular operators.

This article will discuss unlocking the 4G modem ZTE MF823 and ZTE MF823D, which is sold by the Megafon operator under the name Megaphone M100-3, and the operator Beeline - ZTE MF823 Beeline and ZTE MF823D Beeline. You can find detailed specifications and available firmware on this page:.

Like many articles about unlocking, I'll start with the data that the dc-unlocker client shows

Found modem: M100-3
Model: ZTE Megafon M100-3
IMEI: 862926022166295
Firmware: BD_MF823HDV1.0.0B02
Compile date/time: Jul 29 2013 11:36:56 AM
Chipset: Qualcomm MDM9215
NAND Flash: H9DA2GG1GJAMCR
SIM Lock status: unlocked

Unlock / unlock ZTE MF823 (Megafon M100-3, Beeline ZTE MF823, Beeline ZTE MF823D)
1. To unlock the ZTE MF823 modem, you need to make sure that the modem works correctly with your native SIM card.
2. Download and install drivers:.
3. Download the app: .
4. Connect the ZTE MF823 modem to the computer without a SIM card.
5. Launch the application ZTE MF823 Manager and to activate the diagnostic port, press the "1. Connect" button. (The modem must have a default ip address 192.168.0.1 , or you can change the IP address to 192.168.8.1 (for ZTE MF823D model).
6. After that, the installation of drivers will begin and in Device Manager - Section COM Ports should appear ALCATEL HS-USB Android DIAG 902D (COM_X_). At this stage, you need to remember the number of the assigned COM port(COM_X_), where X is the desired number. If, in addition to it, the system tries to install other drivers and gives an error, then do not pay attention to it.

7. App ZTE MF823 Manager press the button "2. Detect" this will update the list of available COM ports in the system. Then in the dropdown list you need to select the com port (COM_X_), which we remembered in paragraph 6.
8. And now we press the button "3 Read".

In the program window, we see the following information:

IMEI: 862926022166295
Unlock attempts: 05
Status: Locked
Encrypted: D7D52F57BD0E942193501DB67FDA6926

9. And now let's figure out what exactly we got.
IMEI - Have a modem, it must match with your modem and contain 15 digits.
Unlock attempts - the number of attempts to enter the unlock code, in this case there are 5.
Status: Locked - means locked
Encrypted: - data on the basis of which the unlock code will be issued.

Attention!!! If you have received data in a different format or form, you need to repeat steps 1-8. And pay attention to the correct installation of drivers for the DIAG port, and the correct choice of the COM port in paragraph 7.

10. Go to the page: Free check for unlock availability for ZTE modems and fill in the IMEI and Encrypted fields received in clause 8.
11. If the check result is: Excellent! You can order code!. Then we pass on link and order the unlock code. If the answer is negative, or the data from the modem was read incorrectly, or we cannot unlock your modem.

12. After making the payment, a form with the following fields will be available to you:
- Address Email(email);
-IMEI;
- Encrypted block;
It is necessary to fill them out carefully and without errors and click on the submit button.
13. On the same page, in the paid item section, you will see Unlock code.

14. Insert into the modem ZTE MF823 (Megafon M100-3, Beeline ZTE MF823, Beeline ZTE MF823D) a SIM card of a "foreign" operator and into the software from the modem, in the case of Megafon M100-3 Enter Unlock Code, and in the case of a modem Beeline ZTE MF823 enter the unlock code if you enter the modem via the Web interface.

ZTE MF823- one of the few modems present on Russian market, which is based on the chipset Qualcomm 921 5. A very popular and powerful was assembled on a very similar chipset Huawei modem E392, from which he even adopted part of the internal architecture. However, these devices are completely different. Favorably distinguishes ZTE MF823 the fact that the device now works not in the mode of a conventional modem, but in the network card emulation mode (RNDIS). Driver Free technology, which is used in the modem, allows you not to install drivers and special programs to control the modem. On board the modem works Linux similar BusyBox system, which certainly gives great opportunities for setting up the network and for controlling the modem via the command line.

Frequencies
LTE-FDD: 800/900/1800/2600MHz;
LTE-FDD: DL/UL 100/50Mbps (Category3)
UMTS: 900/2100MHz;
EGPRS/GSM: 850/900/1800/1900MHz;

Speeds
LTE-FDD DL/UL 100/50Mbps
DC-HSPA+: DL/UL 42/5.76Mbps

physical characteristics
Dimensions: 90mm x 28.4mm x 13mm

Operating Systems:
Windows7, Windows XP, Vista, Win8, Mac OS

Additionally
Additional features: card slot microSD memory(up to 32 GB)
Connector for external antenna
Online update
Web UI

New firmware for MF823 Beeline. (Official)
Software version (WEB UI): WEB_BLERUSMF823V1.0.0B03
Device software version: BD_MF823HDV1.0.0B03
Download: BD_MF823HDV1.0.0B03

New firmware for MF823 Beeline. (Official)
Software version (WEB UI): WEB_BLERUSMF823V1.0.0B04
Device software version: BD_MF823HDV1.0.0B04
Download: BD_MF823HDV1.0.0B04

Unlock ZTE MF823, MF823D (Megaphone M100-3, Beeline ZTE MF823, Beeline ZTE MF823D)

1. Install the program from the modem.
2. Insert into modem ZTE MF823 (Megafon M100-3, Beeline ZTE MF823, Beeline ZTE MF823D) SIM card of a "foreign" operator.
3. We launch the program from the modem in the case for Megafon M100-3 Enter unlock code, and in the case of a modem Beeline ZTE MF823 enter the unlock code if you enter the modem via the Web interface.