Monoblock msi how to remove the back cover. How to disassemble a monoblock? Open Lenovo, Sony, Acer, Asus, HP, MSI, photo instructions
Disassembly/Setup
How to disassemble a monoblock? Open Lenovo, Sony, Acer, Asus, HP, MSI, photo instructions
How to disassemble a monoblock? If you asked yourself such a question, then you probably started upgrading your friend, or maybe you want to clean it thoroughly, or maybe something else. Whatever the reason, first of all you will need to open back cover, y different manufacturers covers can be fastened in different ways, with snaps, bolts or other fasteners. Below we will consider examples-instructions with photos and comments on how to disassemble the case of a monoblock from well-known manufacturers - Lenovo, Sony, Acer, Asus, HP, MSI. If you didn’t find your specific model, it doesn’t matter, look at how models similar to your monoblock open, this should help you understand how to do it in your case.
We disassemble Acer z5710
Photo instruction on how to disassemble a monoblock computer Acer z5710 with comments.
Open the back cover in the center of the monoblock, lightly press it and push it out
After removing the cover, remove the cover that closes the compartment random access memory, just remove, there are no latches here
![](https://i0.wp.com/monoblok-computer.ru/cont2/acer-z5710-open-3.jpg)
We remove the cover of the power supply, you do not need to unscrew anything, just pull the top edge towards you
To remove the decorative trims on the right and left, unscrew three screws on each and remove them
![](https://i2.wp.com/monoblok-computer.ru/cont2/acer-z5710-open-5.jpg)
Now we unscrew all the screws around the perimeter of the case and a few inside, a total of 14 pieces, if something is forgotten, the lid will not open
![](https://i0.wp.com/monoblok-computer.ru/cont2/acer-z5710-open-6.jpg)
After everything is unscrewed, we pull the cover up, it should easily move away, since there are no latches or other fasteners
![](https://i2.wp.com/monoblok-computer.ru/cont2/acer-z5710-open-7.jpg)
That's all, and dismantled the monoblock Acer z5710, rear end open, now you can clean it or upgrade components
Disassembling Asus ET2700
Instructions on how to disassemble a monoblock asus computer ET2700 with comments and photos of this difficult process.
![](https://i1.wp.com/monoblok-computer.ru/cont2/asus-et2700-razbiraem.jpg)
At the corners of the monoblock body, remove the plugs that cover the screws, unscrew them
![](https://i2.wp.com/monoblok-computer.ru/cont2/asus-et2700-razbiraem-2.jpg)
Two screws are hidden under the optical drive, open the drive and unscrew it too
![](https://i1.wp.com/monoblok-computer.ru/cont2/asus-et2700-razbiraem-3.jpg)
On the other side of the monoblock, just opposite the drive, slightly open the cover, there are also two screws
There are decorative panels around the leg, they are fastened with snaps, use a flathead screwdriver to pry them out, there are several screws hidden under them
![](https://i0.wp.com/monoblok-computer.ru/cont2/asus-et2700-razbiraem-5.jpg)
After removing the leg of the monoblock, open the lid, it is latched, pry with something flat and slowly gently lift the entire back cover
![](https://i2.wp.com/monoblok-computer.ru/cont2/asus-et2700-razbiraem-6.jpg)
We remove HDD, we twist it from the metal case
![](https://i1.wp.com/monoblok-computer.ru/cont2/asus-et2700-razbiraem-7.jpg)
We remove the metal holders-slats, unscrew the antenna input
![](https://i2.wp.com/monoblok-computer.ru/cont2/asus-et2700-razbiraem-8.jpg)
Open the lid where two wires lead, one of them is antenna and disconnect the wires
![](https://i2.wp.com/monoblok-computer.ru/cont2/asus-et2700-razbiraem-9.jpg)
We unscrew all the screws that we find around the perimeter of the metal casing
![](https://i1.wp.com/monoblok-computer.ru/cont2/asus-et2700-razbiraem-10.jpg)
Remove the casing, everything is ready monoblock disassembled
Disassembling the HP TouchSmart 600
Instructions with photos and explanations for them on how to disassemble the TouchSmart 600 monoblock.
![](https://i2.wp.com/monoblok-computer.ru/cont2/hp-touchsmart-600-otkryvaem.jpg)
First, unscrew the screws of the central cover under the leg and open it
![](https://i2.wp.com/monoblok-computer.ru/cont2/hp-touchsmart-600-otkryvaem-2.jpg)
After removing the cover, unscrew the screws securing the legs and remove it
We unscrew the screws at the bottom of the monoblock, the extreme screws fasten the legs-stops, remove them
![](https://i1.wp.com/monoblok-computer.ru/cont2/hp-touchsmart-600-otkryvaem-4.jpg)
We remove the hard drive, unscrew the fastening screws and pull out the cable
![](https://i1.wp.com/monoblok-computer.ru/cont2/hp-touchsmart-600-otkryvaem-5.jpg)
We unscrew all the screws around the perimeter of the case, they will have to look for a lot
![](https://i2.wp.com/monoblok-computer.ru/cont2/hp-touchsmart-600-otkryvaem-6.jpg)
Remove the cover-stub to access the RAM monoblock
![](https://i0.wp.com/monoblok-computer.ru/cont2/hp-touchsmart-600-otkryvaem-7.jpg)
We remove the decorative strips on the left and right sides, screws are hidden under them
![](https://i1.wp.com/monoblok-computer.ru/cont2/hp-touchsmart-600-otkryvaem-8.jpg)
We remove the side panel that covers the ports, in order to remove it, you need to move the latch on the side
![](https://i2.wp.com/monoblok-computer.ru/cont2/hp-touchsmart-600-otkryvaem-9.jpg)
Remove the decorative strip on the other side of the monoblock
![](https://i0.wp.com/monoblok-computer.ru/cont2/hp-touchsmart-600-otkryvaem-10.jpg)
Remove the cover optical drive, it is fixed on latches, under it there are two more screws
![](https://i1.wp.com/monoblok-computer.ru/cont2/hp-touchsmart-600-otkryvaem-11.jpg)
When all the screws are unscrewed, it remains to remove the fasteners, it is located at the bottom right, remove it and you can open it
![](https://i1.wp.com/monoblok-computer.ru/cont2/hp-touchsmart-600-otkryvaem-12.jpg)
The lid is fastened with latches, we lift it smoothly and carefully, nothing complicated
![](https://i2.wp.com/monoblok-computer.ru/cont2/hp-touchsmart-600-otkryvaem-13.jpg)
We unscrew the screws around the perimeter of the metal casing, we also remove the optical drive
![](https://i1.wp.com/monoblok-computer.ru/cont2/hp-touchsmart-600-otkryvaem-14.jpg)
Removing the metal casing
![](https://i2.wp.com/monoblok-computer.ru/cont2/hp-touchsmart-600-otkryvaem-15.jpg)
Monoblock computer HP TouchSmart 600 disassembled, work done
We disassemble the monoblock computer MSI
We disassemble Lenovo IdeaCentre B505
Disassembling the Sony VAIO Tap 20
© All-In-One PC Club
Monoblock was purchased in September 2011.
Lately, he began to blunt and Carlson's revolutions were all the time at the maximum. I looked at the temperature in AIDA - under 60 in idle time.
Since there is little experience and there is no confidence that the service will do everything clearly, I decided to take it apart myself.
As it turned out, there is nothing complicated there. You will need two screwdrivers (preferably with magnets): a regular Phillips and a small Phillips. Of course, disconnect from the mains, remove static from yourself and from the tools (about the heating battery, for example).
Put on something soft thread display down. Unscrew the two small bolts that secure the stand cover. Let's take it off.
Let's pull to the sides and towards ourselves the decor of the stand.
Remove the 4 screws to remove the stand
Unscrew all the bolts that secure the back cover.
There are "hooks" in the upper part, so having unscrewed all the bolts, we pull the lower part of the back cover and it can be easily removed. Such a picture will appear before us. It remains a little - unscrew a few more bolts.
If you just want to clean the radiator from dust, then unscrew the small screws marked with red arrows. But my advice to you, do not be lazy and change the thermal paste, because on my video card it turned into stone. Then you have to unscrew all the bolts marked with green arrows. Gently shake the entire thermal interface and remove it.
This is what my radiator looked like before cleaning
We take a brush and a vacuum cleaner.
Thermal paste was applied pretty well, but in my opinion a little thick (did not regret it)
Maybe someone will need the Carlson marking
Now it purrs like new. idle temperature
When buying a flash drive, many people ask themselves the question: "how to choose the right flash drive." Of course, choosing a flash drive is not so difficult if you know exactly for what purposes it is purchased. In this article I will try to give a complete answer to the question posed. I decided to write only about what to look for when buying.
A flash drive (USB drive) is a drive designed to store and transfer information. The flash drive works very simply without batteries. You just need to connect it to USB port at your PC.
1. Flash drive interface
On the this moment There are 2 interfaces: USB 2.0 and USB 3.0. If you decide to buy a flash drive, then I recommend taking a flash drive with USB interface 3.0. This interface was made recently main feature is the high data rate. We'll talk about speeds a little later.![](https://i2.wp.com/3.bp.blogspot.com/-nfJDPDtZqCI/VUusV8PKXHI/AAAAAAAADC8/2IJZb_nGSWg/s1600/USB_fleshka_1.jpg)
This is one of the main parameters that you need to look at first. Now flash drives are sold from 1 GB to 256 GB. The cost of a flash drive will directly depend on the amount of memory. Here you need to immediately decide for what purpose a flash drive is bought. If you are going to store text documents, then 1 GB is enough. For downloading and transferring movies, music, photos, etc. you need to take the more, the better. To date, the most popular are flash drives with a capacity of 8GB to 16GB.
3. Body material
![](https://i1.wp.com/1.bp.blogspot.com/-NJm3EqzL0f8/VUut_I8Cn8I/AAAAAAAADDg/GC8wrvhgJEo/s1600/USB_fleshka_5.jpg)
The body can be made of plastic, glass, wood, metal, etc. Flash drives are mostly made of plastic. There is nothing I can advise here, it all depends on the preferences of the buyer.
4. Transfer rate
Earlier I wrote that there are two standards USB 2.0 and USB 3.0. Now I will explain how they differ. The USB 2.0 standard has a read speed of up to 18 Mbps and a write speed of up to 10 Mbps. The USB 3.0 standard has a read speed of 20-70 Mbps, and a write speed of 15-70 Mbps. Here, I think, nothing needs to be explained.![](https://i0.wp.com/4.bp.blogspot.com/-i1Ee5nnp_hI/VUutW6pHD2I/AAAAAAAADDI/_HG8ihLydi0/s1600/USB_fleshka_2.jpg)
![](https://i1.wp.com/4.bp.blogspot.com/-fs1YlRwqyDQ/VUutW5WntKI/AAAAAAAADDM/s8y-4cTsXYk/s1600/USB_fleshka_3.jpg)
Now in stores you can find flash drives of different shapes and sizes. They can be in the form of jewelry, fancy animals, etc. Here I would advise taking flash drives that have a protective cap.
6. Password protection
There are flash drives that have a password protection feature. Such protection is carried out using a program that is located in the flash drive itself. The password can be set both on the entire flash drive, and on part of the data in it. Such a flash drive will primarily be useful to people who transfer corporate information in it. According to the manufacturers, if you lose it, you don't have to worry about your data. Not so simple. If such a flash drive falls into the hands of an understanding person, then hacking it is just a matter of time.![](https://i0.wp.com/1.bp.blogspot.com/-dxZ3O0uw4rE/VUutv-OWgkI/AAAAAAAADDY/GHJqRlY0dc4/s1600/USB_fleshka_4.jpg)
Such flash drives look very beautiful, but I would not recommend buying them. Because they are very fragile and often break in half. But if you are a neat person, then feel free to take it.
Conclusion
Nuances, as you noticed, a lot. And this is just the tip of the iceberg. In my opinion, the most important parameters when choosing: the standard of a flash drive, the volume and speed of writing and reading. And everything else: design, material, options - this is just a personal choice of everyone.Good afternoon my dear friends. In today's article, I want to talk about how to choose the right mouse pad. When buying a rug, many do not attach any importance to this. But as it turned out, this moment needs to be given special attention, because. mat determine one of the indicators of comfort while working at a PC. For an avid gamer, choosing a rug is a completely different story. Consider what options for mouse pads have been invented today.
Mat options
1. Aluminum2. Glass
3. Plastic
4. Rubberized
5. Double sided
6. Helium
And now I would like to talk about each species in more detail.
1. First, I want to consider three options at once: plastic, aluminum and glass. These mats are very popular with gamers. For example, plastic mats are easier to find commercially. On such mats, the mouse glides quickly and accurately. And most importantly, these mats are suitable for both laser and optical mice. Aluminum and glass mats will be a little more difficult to find. And yes, they will cost a lot. The truth is for what - they will serve for a very long time. Rugs of these types have small flaws. Many people say that they rustle and feel a little cool to the touch during operation, which may cause discomfort for some users.
2. Rubberized (rag) mats have a soft glide, but the accuracy of their movements is worse. For ordinary users such a rug will be just right. Yes, and they are much cheaper than the previous ones.
3. Double-sided mousepads are, in my opinion, a very interesting kind of mousepads. As the name implies, these rugs have two sides. As a rule, one side is high-speed, and the other is high-precision. It happens that each side is designed for a certain game.
4. Helium pads have a silicone cushion. She allegedly supports her hand and relieves tension from it. For me personally, they were the most uncomfortable. By appointment, they are designed for office workers, since they sit at the computer all day. For ordinary users and gamers, these mats are not suitable. The mouse slides very poorly on the surface of such rugs, and their accuracy is not the best.
Mat sizes
There are three types of rugs: large, medium and small. It all depends on the taste of the user. But as is commonly believed, large rugs are well suited for games. Small and medium ones are taken mainly for work.Rugs design
In this regard, there are no restrictions. It all depends on what you want to see on your rug. The blessing now on rugs that only do not draw. The most popular are logos computer games, such as dota, warcraft, ruler, etc. But if it happened that you could not find a rug with the pattern you need, do not be upset. Now you can order a print on the rug. But such rugs have a minus: when printing is applied to the surface of the rug, its properties deteriorate. Design for quality.On this I want to end the article. From myself I wish you to make the right choice and be happy with it.
Who does not have a mouse or wants to replace it with another, I advise you to look at the article:.
Monoblocks from Microsoft have replenished with a new monoblock model called Surface Studio. Microsoft presented its new product recently at an exhibition in New York.
On a note! I wrote an article a couple of weeks ago where I reviewed the Surface monoblock. This monoblock was presented earlier. Click on to view the article.
Design
Microsoft calls its new product the thinnest monoblock in the world. With a weight of 9.56 kg, the thickness of the display is only 12.5 mm, the other dimensions are 637.35x438.9 mm. The display dimensions are 28 inches with a resolution greater than 4K (4500x3000 pixels), aspect ratio 3:2.On a note! The display resolution of 4500x3000 pixels corresponds to 13.5 million pixels. This is 63% more than 4K resolution.
The monoblock display itself is touch-sensitive, enclosed in an aluminum case. On such a display, it is very convenient to draw with a stylus, which ultimately opens up new possibilities for using a monoblock. In my opinion, this monoblock model will appeal to creative people (photographers, designers, etc.).
On a note! For people of creative professions, I advise you to look at an article where I considered monoblocks of similar functionality. Click on the selected one: .
To everything written above, I would add that the main feature of the monoblock will be its ability to instantly turn into a tablet with a huge work surface.
On a note! By the way, Microsoft has another amazing candy bar. To find out about it, go to.
Specifications
I will present the characteristics in the form of a photograph.
From the periphery, I note the following: 4 USB ports, a Mini-Display Port connector, an Ethernet network port, a card-reader, a 3.5 mm audio jack, a 1080p webcam, 2 microphones, a 2.1 Dolby Audio Premium audio system, Wi-Fi and Bluetooth 4.0. It also supports Xbox wireless controllers.
Price
When buying a monoblock, it will be installed with Windows 10 Creators Update. This system due out in the spring of 2017. In this operating system there will be an updated Paint, Office, etc. The price of a monoblock will be from $ 3,000.Dear friends, write in the comments what you think about this monoblock, ask your questions. I'll be glad to chat!
OCZ has demonstrated new VX 500 SSDs. These drives will be equipped with Serial ATA 3.0 interface and are made in 2.5-inch form factor.
On a note! For those who are interested in how SSD drives work and how long they live, you can read in an article I wrote earlier:.The novelties are made using 15-nanometer technology and will be equipped with Tochiba MLC NAND flash memory microchips. The controller in SSD drives will be used by Tochiba TC 35 8790.
The lineup VX 500 drives will consist of 128 GB, 256 GB, 512 GB and 1 TB. According to the manufacturer, the sequential read speed will be 550 Mb/s (this is for all drives in this series), but the write speed will be from 485 Mb/s to 512 Mb/s.
The number of input / output operations per second (IOPS) with data blocks of 4 KB in size can reach 92,000 when reading, and 65,000 when writing (this is all arbitrary).
The thickness of OCZ VX 500 drives will be 7 mm. This will allow them to be used in ultrabooks.
Prices of new products will be as follows: 128 GB - $ 64, 256 GB - $ 93, 512 GB - $ 153, 1 TB - $ 337. I think in Russia they will cost more.
Lenovo has unveiled its new IdeaCentre Y910 gaming all-in-one at Gamescom 2016.
On a note! Earlier, I wrote an article where I already considered gaming monoblocks from different manufacturers. This article can be viewed by clicking on this one.
![](https://i2.wp.com/4.bp.blogspot.com/-lyhLII7_zVE/WBzvegfRgtI/AAAAAAAAEP8/jIxpX4acnfQHPn2mPooiHcpud5qc2WkYgCLcB/s640/IdeaCentre%2BY910_1.jpg)
The novelty from Lenovo received a 27-inch frameless display. The display resolution is 2560x1440 pixels (this is QHD format), the refresh rate is 144 Hz, and the response time is 5 ms.
The monoblock will have several configurations. Processor 6 is provided in the maximum configuration Generations of Intel Core i7 volume hard drive up to 2 TB or 256 GB. The amount of RAM is 32 GB DDR4. Responsible for graphics NVIDIA graphics card GeForce GTX 1070 or GeForce GTX 1080 with Pascal architecture. Thanks to such a video card, it will be possible to connect a virtual reality helmet to the monoblock.
From the periphery of the monoblock, I would single out the Harmon Kardon audio system with 5-watt speakers, the Killer DoubleShot Pro Wi-Fi module, a webcam, USB ports 2.0 and 3.0, HDMI connectors.
In the basic version, the IdeaCentre Y910 monoblock will be available in September 2016 at a price of 1800 euros. But the monoblock with the version of "VR-ready" will appear in October at a price of 2200 euros. It is known that this version will have GeForce graphics card GTX 1070.
MediaTek has decided to upgrade its Helio X30 mobile processor. So now the developers from MediaTek are designing a new mobile processor called Helio X35.
I would like to briefly talk about Helio X30. This processor has 10 cores, which are combined into 3 clusters. Helio X30 has 3 variations. The first - the most powerful - consists of Cortex-A73 cores with a frequency of up to 2.8 GHz. There are also blocks with Cortex-A53 cores with a frequency of up to 2.2 GHz and Cortex-A35 with a frequency of 2.0 GHz.
The new Helio X35 processor also has 10 cores and is being created using 10nm technology. Clock frequency in this processor will be much higher than that of its predecessor and ranges from 3.0 Hz. The novelty will allow you to use up to 8 GB LPDDR4 RAM. The Power VR 7XT controller will most likely be responsible for the graphics in the processor.
The station itself can be seen in the photographs in the article. In them we can observe the drive bays. One bay with a 3.5" jack and the other with a 2.5" jack. Thus, it will be possible to connect to the new station as solid state drive(SSD) and hard disk drive (HDD).
The dimensions of the Drive Dock station are 160x150x85mm, and the weight is no less than 970 grams.
Many people probably have a question about how the Drive Dock connects to a computer. The answer is: this happens through a USB 3.1 Gen 1 port. According to the manufacturer, the sequential read speed will be 434 Mb / s, and in write mode (serial) 406 Mb / s. The novelty will be compatible with Windows and Mac OS.
This device will be very useful for people who work with photo and video materials at a professional level. The Drive Dock can also be used to backups files.
The price for a new device will be acceptable - it is $ 90.
On a note! Previously, Renduchinthala worked at Qualcomm. And since November 2015, he moved to a competing company Intel.
In his interview, Renduchintala did not talk about mobile processors, but only said the following, and I quote: "I prefer to talk less and do more."
Thus, the top manager of Intel made an excellent intrigue with his interview. We just have to wait for more announcements in the future.