Firmware for samsung scx 5637fr. Attention! Printing a report is possible if the printer is not blocked! To remove the lock, you need to replace the chip in the cartridge with an original working one
Version V2.00.01.44
Firmware for printers SCX 5637FR
Firmware Samsung printer SCX 5637FR
To order firmware, the following information is required:
1). Exact printer model (as written on the printer)
2). Printer firmware version (in the Configuration Report, see Firmware Version, example V2.00.01.38)
3). Printer serial number (in the Configuration Report, see Machine Serial Number, 15 digits)
4). CRUM black cartridge chip number (in the Supplies Information Report, see Serial No: CRUM, 11 digits).
How to Print a Samsung SCX 5637FR Report
To find out serial number and firmware version. Press the menu button 3 times, “system settings” will appear, press OK. Using the left - right buttons, find the word “Reports”, press OK. Using the left - right buttons, find the word “Configuration”, click OK, confirm printing. Prints 2 sheets – “Configuration report”
To find out the CRUM number. Press the menu button 3 times, “system settings” will appear, press OK. Using the left - right buttons, find the word “Reports”, press OK. Using the left - right buttons, find the word (Supplies Information Report), click OK, confirm printing. Prints 1 sheet – (Supplies Information Report).
If the printer is locked, the report will not print.
Samsung SCX 5637FR printer firmware instructions
The printer has a forced firmware update mode.
To do this, turn on the printer with the stop button held down, after 2-4 seconds, release the stop button, and press the stop button again.
I warn you: Flash with a chip in the cartridge!
- RUN COMMAND FILE download_1.bat
- Wait for the reboot and turn on the printer in forced mode.
- SEAL OR REMOVE THE CHIP FROM THE CARTRIDGE.
Wait until the printer reboots, then remove the cartridge from the printer and remove the chip or cover it with tape. insert the cartridge, place the paper in the five-sheet tray, the indicator should turn green.
It is important to know!
After you flash the printer, you need to remove the chip from the cartridge and save the chip just in case (the chip from the cartridge is the chip key). In all future cartridges, when installing, remove the chip or cover the contacts with tape, I mean cartridges that you will later use in the printer! The chip from the cartridge must be removed or sealed. If it happens that you mistakenly inserted another cartridge with a chip, then the device will be 100% blocked, and for this case it is worth saving your chip - the key with which you can unlock the device.
Thank you, we are waiting for your orders.
Find out information about the printer if the printer does not print a report (CRUM number, Firmware version).
TO ORDER THE FIRMWARE YOU NEED TO KNOW:
Firmware price 2.9$V2.00.01.44 19.9$ |
Firmware update MFP SCX-5637FR is possible mainly fromFORCED FIRMWARE MODE!
TO VIEW THE FIRMWARE VERSION ON THE DISPLAY MFP
- click: MENU#, 1, 9, 3, #
PRINT SAMSUNG REPORT SCX-5637FR
ATTENTION!Printing a report is possible if the printer is not blocked! To remove the lock, you need to replace the chip in the cartridge with an original working one.
From the menu:
- By pressing MENU, find: SETTINGS SYST. /SYSTEM SETAP
- press OK- buttons UP DOWN find: REPORTS
- press OK and select: CONFIGURATION or CONSUMABLES INFORMATION / SUPPLIES INFO and press OK
From the service menu:
- Login to section REPORT
- select item CONFIGURATION or SUPPLIES INFO. The corresponding report will print.
Entering the service menu (TECH MENU)
- click: MENU#, 9, 3, 4
SAMPLE REPORTCONFIGURATIONREPORT SAMSUNG SCX-5637FR
SAMPLE REPORT SUPPLIES INFORMATION SAMSUNG SCX-5637FR
ENTERING FORCED SCX-5637FR FIRMWARE MODE
- With the MFP turned off, press and hold the button STOP
- Turn on the MFP with the button POWER, release the button STOP and quickly press the button again STOP
Upon successful entry into forced mode, a message appears on the MFP display DOWNLOAD MODE. PRESS STOP KEY will be replaced by a message WAIT IMAGE.
PRINTER FIRMWARE:
- The printer is connected to your computer or laptop and turned on.
- It is better to install the printer driver, if not install it, then you need to cancel the “Found New Hardware Wizard”.
- all disabled USB devices from the computer, with the exception of the printer being upgraded (it is advisable to use a PS/2 mouse and keyboard).
- drag the resulting firmware file with the mouse cursor ( file.HD) for the program usbprns2.exe .
- A DOS window displaying the data transfer to the printer will appear on the computer (laptop) display for a few seconds.
- the printer display will display the firmware process in the form of a change in the indication (ATTENTION!!! AT THIS MOMENT IT IS IMPOSSIBLE TO TURN OFF THE PRINTER FROM THE 220V NETWORK!!! This will lead to failure of the printer; repair is not always possible and is very labor-intensive).
- the printer will automatically reboot.
- For example, we seal the cartridge chips with tape or take them out.
- The firmware is completed, the device is ready for refilling and further operation.
- leaving a REVIEW for people.
Printer firmware (firmware)
- this is the installation software printer with a fixed code that resets the counter of printed pages and prevents the printer from being blocked.
Crypto protection (otherwise known as refill protection) installed in modern Samsung and Xerox devices, it counts down the specified program code formatter (shown in the picture), the number of pages printed, after which the printer is blocked and until you install a new cartridge or flash your printer, it will not work. The firmware of the device is done without opening or other actions aimed at violating the integrity, the printer is entered into service mode, after which FIX is “uploaded” via USB.
On the issue manufacturer's warranty. If you are worried that if the printer breaks down, you will not be able to contact the warranty workshop, we want to reassure you, let’s say your paper pickup roller is broken, you are going to take the printer or MFP to the service center, you can return firmware
firmware for the duration of repair in the warranty workshop of the manufacturer or seller. Many of our clients turn to our service under warranty and save a lot on refilling cartridges. Let's try to calculate the savings using the example of one printer.... for example, Samsung ML-1660. Now many people are asking the question “What is printer firmware?”
An average-sized office buys a new cartridge (RUB 2,240) approximately once a month. Refilling the cartridge (350 rubles) is also required approximately once a month. The printer will last approximately 4 years or 48 months.
2240 rub. x 48 months = 107520 rub. This is the approximate cost of purchasing cartridges over 4 years (WOW!!!..........)
350 rub. cartridge refill x 48 months. =16800 rub. refueling cost for 4 years + 1000 rub. (firmware) = 17800 rub.
Thus the approximate saving in 4 years will be89720 rubles, (of course, this is a rough calculation, during this time you will have to buy several cartridges since the physical resource is limited) and this is on 1 printer, but now think about it, don’t manufacturers of office equipment want to lose that kind of money from the users of their printers and MFPs? Of course, Samsung and Xerox are against refilling cartridges in any form, the fight against refillers continues as long as savings win, we’ll see what happens next.
Our services:
Approximate prices for services
Name of works
b/w f. A4
up to 16 ppm
b/w f. A3
up to 16 ppm
b/w f. A3
16- 24 ppm
b/w f. A3
25 - 39 ppmb/w f. A3
40-59 ppm
Departure of an engineer within the Moscow Ring Road 1000 1000 1000 1000 1000 Departure of an engineer outside the Moscow Ring Road according to dogov. according to dogov. according to dogov. according to dogov. according to dogov. Diagnostics (paid if repair is refused) 300 360 500 700 1000 Prevention 850 1020 1100 1450 1850 Resetting error codes 200 240 200 250 300 Replacing Paper/Original Feed Parts 750 900 950 1100 1200 Repair of paper/original feed unit 850 1020 1000 1200 1300 Replacing paper transport parts 700 840 800 900 1000 Repair of paper transport unit 800 960 900 1000 1100 Replacing the photodrum and squeegee 800 960 1100 1300 1600 Replacing the Teflon shaft 600 720 850 950 1050 Replacing tefl bearings. shaft 300 360 350 400 450 Replacing the rubber shaft 650 780 700 950 1050 Replacing rubber shaft bearings 300 360 400 400 450 Replacing the felt shaft 400 480 450 450 500 Replacing thermal film 750 900 950 1200 1400 Replacing the thermocouple 750 900 950 1200 1400 Repair of corona wire/charge roller 400 480 500 600 800 Replacing the developer 500 600 550 600 700 Removing electronic component (boards) 250 300 300 500 650 Repair of electronic component (boards) 800 960 1000 1200 1400 Removing the drive unit 200 240 450 500 700 Drive unit repair 750 900 1000 1200 1500 Mechanical repair 700 840 900 1000 1300 Replacing a function block 700 840 900 1100 1300 Scanner assembly repair 800 960 1000 1200 1300 Adjustment and calibration of the scanner assembly 600 720 800 900 1100
Samsung MFP SCX-5637FR, which uses Laser b/w printing technology with a maximum paper size of A4, a print resolution of 1200x1200 dpi and a print speed of up to 35 ppm. pages per minute, its use in small and medium-sized companies, at home, taking into account a small amount of printing, has proven itself excellent in terms of quality and the ability to refill cartridges.
The starter cartridge is designed for 600-700 pages (this is a starter - test cartridge), at which point the Samsung SCX-5637FR MFP indicates that the cartridge is running out of toner, and you need to buy and install a new one. But here you have a choice - buy a new cartridge or refill an empty one. If you choose the second option, a certain problem appears, namely: the cartridges for this printer have a built-in microcircuit (chip), it transmits to the device information about the remaining toner in the cartridge hopper. And if you are refilling a cartridge, it is not enough to fill it with toner; you need to remove the cryptographic protection from the chip (block the counting of printed pages).
Here again, there are two options for solving the problem - changing the chip in the cartridge or updating the printer firmware (changing the software) in the printer. Replacing a chip is expensive, since you have to change the chip every time you refill cartridges - this is the main disadvantage of replacement. The second one is much more profitable and less problematic than constantly replacing the chip - the Samsung SCX-5637FR MFP is reflashed once and for all.
The firmware of the Samsung SCX-5637FR MFP is performed both in our workshop (1-2 hours) and in the client’s office. The customer must have a computer (laptop) with operating system Windows and Internet connection.
Fix firmware Samsung SCX-5637FR
Price - 80 UAH. \ 200 rub. \ 3 USD
Model |
Firmware version |
Price |
V2.00.01.05 |
80 UAH \ 200 rub. \ 3 USD |
To order FIX firmware SCX-5637FR, please specify the necessary information:
MFP model (see sticker on the back panel)
MFP firmware version (see in the Firmware Version report line)
CRUM number of the cartridge chip (see in the report line Serial No: CRUM-)
Printer serial number (see the Machine Serial Number report line)
Print Samsung Report SCX-5637FR
Configuration report (Configuration Report) - press the [Menu] button, the inscription (System Setup) / (System Setup) appears, press the [OK] button. Use the left-right buttons to find (Reports) / (Report), press [OK]. Use the left-right buttons to find (Configuration) / (Configuration), press [OK]. The report is printing Configuration Report.
Report on consumables (Supplies Information) - press the button[Menu] , the inscription appears { System Setup) / ( System Setup ) , press the button[OK] . Use the left-right buttons to find(Reports) / (Report), click [OK] . Use the left-right buttons to find (Information about consumables) / (Supplies Info), click [OK] . The report is printing Supplies Information (Information about consumables) .
If the MFP is locked and refuses to print reports from the regular menu, printing is possible from the service menu. To enter the service menu (TECH MENU) sequentially, press: [ Menu ] [ # ] [ 1 ] [ 9 ] [ 3 ] [ 4 ] (everything must be done without delay). Find the section (Report), select (Configuration) or (Supplies Info). The corresponding report will print.
To view the firmware version on the MFP display
Press the buttons on the printer panel in sequence: [#] [#]
Sample Configuration Report Samsung SCX-5637FR
Sample Supplies Information report Samsung SCX-5637FR
Firmware instructions Samsung SCX-5637FR
The letter with the firmware comes with an archive containing two files (the firmware itself FIX_NU_xxxxxxxxxxx_SCX5637FR_V2.00.01.xx.hd and usbprns2.exe)
1. Connect the printer to the computer, wait for the device to become ready (it is not necessary to install drivers for the printer)
2. Unpack the archive with the firmware
3. Drag and drop the firmware file with your mouse FIX_NU_xxxxxxxxxxx_SCX5637FR_V2.00.01.xx.hd on usbprns2.exe
A black window with running dots will appear and close after a few seconds. After this, the device will begin to flash
Wait until the printer or MFP reboots (Caution! Do not turn off the power until the machine reboots.)
4. After rebooting, seal or remove the chip on the cartridge! The toner level will show 100%.
Entering forced boot mode Samsung firmware SCX-5637FR
With the MFP turned off, press and hold the button. Turn on the MFP with the button, release the button and quickly press the button again. Upon successful entry into the forced mode, the message on the MFP display (Download Mode. Press Stop Key) will change to the message (Wait Image). In this mode, download the firmware in the usual way(by dragging.hd to usblist2.exe)
We will be glad for your comment left after the printer firmware