Toner cartridge kyocera tk 1110 refill. Refilling kyocera cartridges: at home and in the service
Printers and MFPs from Kyocera have always been distinguished by increased wear resistance and affordable prices. As a rule, the increased reliability of equipment affects its size. If for corporate printers designed for group use, this is not a disadvantage, then for desktop printers, it is simply unacceptable.
FS-1060DN - next generation desktop printer
Who wants to have a desktop printer that eats up a lot of work space? Kyocera also understood this and at the end of 2012 introduced a new line of printers and MFPs based on ECOSYS technology. New line desktop printers and MFPs turned out to be extremely successful and today it has every chance to significantly oust its competitors in the desktop segment. laser printers. In the new line of Kyocera printers, cartridges have significantly changed shape, and for the first time, instead of contactless RFID chips, full-fledged four-pin chips began to be used.
Which toner to use for refilling TK-1110 / TK-1120 cartridges?
Despite the fact that the charge roller was used instead of the corotron filament in the Drum Unit, the sign of the toner charge itself has not changed. Although the toner formula has undergone some changes, the new original toner has finer particles and is less viscous. The TK-340 / TK350 / TK-360 toner cartridges showed quite decent print quality. For testing, only premium brands of toner were used - Tomoegawa, MITSUBISHI and So-Kar. By the way, So-Kar already produces specialized toners for the new line of ECOSYS printers. For refilling cartridges TK-1110 / TK-1120 you need about 90g. toner.
On a note: according to unconfirmed reports, the use of damask toner for refilling TK-1110 / TK-1120 cartridges disables the toner pumping gears. This is due to the high viscosity of the toner and the susceptibility of the toner to caking.
Do I need to change the chips on TK-1110 / TK-1120 cartridges or not?
This question comes up quite often on the forums. You need to understand that chips are not only an electronic blank that allows you to track the life of the cartridge, but also the protection of the manufacturer from counterfeiting his products. If you do not let the cartridge empty completely and refill the toner from time to time, the printer will not block, it will simply issue after a while Announcement that non-original toner is being used. How does this threaten the owner of the printer? After the printer has highlighted this inscription, the information is recorded in the "Event Log" and based on this log, service center Kyocera has the right to refuse a customer free warranty service. Therefore, we recommend refilling Kyocera cartridges only with the replacement of the chip.
Instructions for refilling cartridges TK-1110 / TK-1120
Kyocera cartridges are easily refillable. These are the few cartridges that users can refill on their own without going to a specialized service center. Technically, the TK-1110 cartridge is a small tube with a stopper, a toner pumping mechanism and a chip. Despite the fact that the manufacturer fills the toner through the cork at the factory, you will not be able to do this, since the manufacturer seals the cork tightly.
First of all, we change the chip, which is mounted on plastic rivets. Now you need to fill in the toner cartridge. To do this, you need to make a hole in the cartridge. The hole is best soldered, for example, heated metal tube. You can, of course, drill a hole, but then there is a high chance of foreign particles getting into the developing unit, formed during the process of drilling a hole. It is better to make a hole in the same place as shown in the photo (in our opinion, this is the most optimal location). After filling the toner, degrease the edges of the hole and close it with a strong reinforced tape. That's all. We wish you success.
Today, due to the active activities of various companies and the use of various printing equipment, the service of refilling cartridges is very popular. Therefore, this type of activity is the main one for many companies.
Refilling cartridges for different models of printers and MFPs is a very complicated procedure. Therefore, many office workers and home users of office equipment prefer to use the services provided by specialized companies and professionals. It is the refilling of the printer cartridge when using high-quality toner that allows you to extend its service life, continue to fully use the device without losing the quality of prints.
Also, the CHIP installed by the manufacturer, which blocks the printer when the limit of prints is reached, makes it difficult to refuel some devices. Such consumables require not only refueling, but also additional flashing of devices. This service is provided by special service centers that refill cartridges, restore them, and replace chips. Using the services offered by companies specializing in servicing modern office equipment, you can also save significantly, because refilling a toner cartridge (or using a compatible consumable) makes it unnecessary to purchase an original cartridge, which is quite expensive.
In the article we will tell you how Kyocera cartridges are refilled.
Kyocera printers are considered the most common for office use: monochrome -FS1025MFP, 1020MFP, FS1060DN, FS1125MF/6025/1035/1040, Kyocera taskalfa 1800/2200/, Ecosys FS1060DN, color - Ecosys FS p6021CDN and others. Accordingly, and expendable materials, which are compatible with these devices (TK 4105, TK-475, TK 1140, TK-3130, etc.), are in demand. How to refuel the cartridges required to work on these units, read below.
Most often in an office environment, a monochrome laser printer is used to print black and white documents. And since there are a lot of varieties of models today, to restore the functioning of the device, when the ink runs out, you can use compatible with several representatives at once model range devices.
Refill cartridge Kyocera TK-1110/1125
So, for example, the kyocera TK1110/1120/1125 laser black cartridge can be used in devices: FS1025MFP/1020 MFP /1120MFP/1040, Ecosys FS-1060DN, 1125MFP (TK-1125 works with Ecosys FS-1061DN, 1325MFP). Even though there are so many device names, the installation cartridge configuration is the same for all of them. Therefore, the filling procedure laser cartridge-toner will be the same. 
In order for refilling the Kyocera TK-1110/1125 cartridge to subsequently produce high-quality prints on the FS1025MFP/1120MFP/1020 MFP/1040, Ecosys FS-1060DN, etc., you need to choose the most best option toner. The toners for Kyocera TK340 /TK350/360 showed quite decent results in the quality of finished images. For one refueling procedure, you need about 90 gr. toner. Also, this procedure involves the replacement of the CHIP. AT otherwise, if the consumable is refueled without replacing the microcircuit, as a result, an inscription about the use of a non-original element may appear, which is also recorded in the device's memory. This is fraught to the user with the fact that in the event of a warranty claim to the service center, specialists have the right to refuse on the basis of the use of the device that does not comply with the terms of the contract.
It should be noted right away that the Kyocera TK-1110 and TK-1125 are considered consumables that are easiest to fill. But still, for the implementation of the procedure, it will be necessary to prepare workplace, then remove from the printer (FS1025 MFP /1120/1040/1020 MFP, Ecosys FS-1060DN) a black tube with a handle, a cork on the body (through which the toner is filled at the factory) and a CHIP. You won’t learn to go the simpler way and immediately pour the powder through the lid, because after filling it is sealed. Therefore, it is necessary to first replace the CHIP, which is held by plastic rivets. After that, a hole should be made in the body of the TK-1110 or TK-1125 cartridge (using a drill or a hot tube of small diameter). To do this, the consumable is installed with the end of the wide part up so that the handle is on the surface. On the top cover approximately in the middle, closer to the upper edge, a hole is made and toner is poured into it. After that, the edges are wiped, and the hole is sealed with reinforced tape. Now the Kyocera TK-1110/TK-1125 cartridge can be inserted into the printer (FS1025MFP/1120MFP/1040, Ecosys FS-1060DN, etc.) and continue printing.
Refilling cartridge Kyocera tk 1140/1130
Refilling the Kyocera tk 1140/1130 cartridge, which is suitable for use on FS-1035MFP/FS1035DP, FS-1135MFP, ECOSYS M2035dn, M2535dn devices, takes place in a slightly different way. However, the use of high quality toner is also important for the procedure.
The Kyocera TK 1140/1130 consumable itself is a hopper with a lid on the side, which should be opened and the reservoir cleaned of toner residues.
Refilling the TK-475 Toner Cartridge
To refill the black toner cartridge TK-475 for FS-6530MFP, FS-6025/6030/6525, compatible with TASKalfa-255/255b/305, it is necessary to equip the workplace with a surface to protect it from toner residue. Then, removing the black container from the printer, you can start refilling. It is recommended to use the appropriate toner cartridge model - TK-475 for the procedure. There should be no problems with refilling compatible consumables, since refilling is carried out through a plug on the container. Through it, you first need to remove the remaining toner, and then fill in the new powder and close the lid, wipe and install the consumable in place. There may be problems with refilling the original TK-475 cartridge, as they have a CHIP that needs to be replaced. As in the previous case, when the Kyocera TK 1140 cartridge was refilled, an additional hole needs to be drilled. Through it, the reservoir is freed from the remnants of the powder, and then a new one is poured. Then this container must be returned to its previous form by sealing the hole with a dense film. Next, the TK-475 can be inserted into the printer.
The black cartridge TK 4105, suitable for work on Kyocera TASKalfa 1800/1801/2200/2201, like TK-3130 for FS-4200DN, 4300DN, is not very difficult to refill. The compatible consumable container opens and is freed from toner residue.
If the design of the TK 4105 cartridge is original, not only very careful refilling will be required, but also a chip replacement in order to remove the restriction and fully use the printing device. The main thing to consider when refilling cartridges TK 4105, TK-475, TK 1140, TK-3130 or any other is a thorough cleaning of the reservoir from the remnants of the used powder. Otherwise, not only the print quality may suffer, but also the device itself. Therefore, users of Kyocera corporate or home devices prefer to use the services of professionals who refill TK 4105, TK-3130 and other cartridges quickly and only with high-quality toner.
Refilling the taskalfa 1800 laser cartridge, which is compatible with the kyocera taskalfa 1800 monochrome printer, will also take a little time. A hole specially provided for filling the toner, closed by a lid, is located on the side. By opening it, the tank is freed from the remnants of the waste powder. After that, you can pour new toner into the container and replace the chip if necessary.
Since with original cartridges problems may arise due to a soldered plug, and a new hole will need to be made, then it is better to turn to specialists with this. In such companies, they will thoroughly clean the consumable, fill it with fresh powder and replace the chip.
How are Kyocera color cartridges refilled?
The stock of Kyocera Ecosys P6021CDN color laser printers, which operate using black, cyan, yellow, and magenta consumable toners, can also be restored at service centers whose range of services includes such activities.
To refill the Kyocera P6021CDN color printer, you will need a high-quality toner that allows you to get clear prints after such manipulations. And for the Kyocera p6021CDN model, they need 4 (TK-580C cyan, TK-580K black, TK-580M magenta, TK-580Y yellow toner). But the feature of refueling these device models is not only this. In order to fully use the consumable element after the refueling procedure, the CHIP installed by the manufacturer must be replaced. Acting as a printed sheet counter, it will not block operation on the p6021CDN printer, but will transfer data on the use of non-original cartridges to the memory buffer.
Therefore, in specialized centers, microcircuits are first replaced, after which refueling can be carried out. In particular, the Kyocera Ecosys P6021cdn has a cartridgeless system. This originality of the design complicates the procedure for filling the element with toner, which once again confirms that it is better to use the services of specialists to fill the printer.
Kyocera FS-1040 (click to enlarge)
Cartridge Kyocera TK-1110 fits models , 1020MFP, 1120MFP .
Kyocera TK-1125 works with FS-1061DN, 1325MFP devices.
Although these cartridges fit different models — They have one instruction manual..
materials
We will need: a compatible toner, a ∅8-10 mm drill with a drill or a tube of the same diameter, a chip and reinforced tape.
Chip. It is possible without it, but then you have to forget about the warranty on the devices. In these models, the photoconductor is designed for 100,000 printed pages. Virtually lifetime warranty. I would be much more comfortable keeping it.
If you want to refuel without chips, then each time after turning on, you need to hold down the [Stop] and [OK] buttons for 2-3 seconds.
Refueling
- We take out the cartridge from the device and make a hole in it. You can drill, but better with a heated tube.
If you drill, it is possible that chips will get inside. If you do not get it, the mixer may fail. This threatens to buy a new cartridge.
- We clean the hopper from the remaining toner. It is necessary to shake well and preferably blow.
- We fall asleep all the jar of 95 grams.
It is better to sleep less than more.
- We clean and degrease the surface near the hole and seal it with tape.
- - Disassembly of the cartridge
- - Evaluation of cartridge elements for serviceability
- - Cleaning the cartridge from the remnants of unused toner
- - Refill with new toner
- - Assembling the cartridge
- STEP #1. Place an order at any time convenient for you
- STEP #2. Free departure of the master within the Moscow Ring Road
- STEP #3. Free cartridge diagnostics with subsequent refilling
- STEP #4. Cash or non-cash payment upon completion of work
Only quality toner.
Guaranteed until the end of the resource.
Departure in Moscow 200 rubles.
From 2 cartridges departure free of charge.
Refilling the cartridge is done with the replacement of the chip.
Guarantee for refueling until the end of the resource.
Refilling the KYOCERA printer.
For refilling Kyocera cartridges, we use only high quality Tomoegawa toner, the highest quality from compatible toners for Kyocera, which has a positive effect on the print quality and resource of the printer's printed circuit assemblies.
We refill cartridges in the following models:
- Kyocera FS-1020MFP
- Kyocera FS-1040
- Kyocera FS-1120MFP
Refilling cartridges includes the following operations:
If necessary, we can replace the chip.
The service for refilling cartridges KYOCERA TK-1110 for laser printers is provided throughout Moscow and the Moscow region.
How TK-1110 cartridges are refilled in our company.
Refilling cartridges TK-1110 printer KYOCERA comes with certified toner High Quality. Cartridge refilling service includes cleaning of old toner residue and refilling the cartridge with new toner.
The client personally chooses where the cartridges will be refilled. If you do not have the opportunity to come to our office, our masters will come to you. To perform cartridge refilling on the road, you need to provide our specialist with a workspace - a clean table. Refilling the cartridge on the road takes 10-20 minutes.
It is also possible to order services on holidays and weekends. To leave our master you need to fill out only an application.
Thanks to many years of experience, we refill cartridges efficiently and quickly, guaranteeing the serviceability of the cartridges without time limits, up to the exhaustion of all the toner.
If the client wishes, our representatives have the opportunity to exchange refilled cartridges for empty ones at the address specified by the client or carry out express refilling of cartridges on the spot. When ordering our services for refilling cartridges from 2 pieces or more, you get a discount.
Refill cartridge Kyocera TK-1110 (1T02M50NXV)! How it works?
In order to provide the highest quality services to our customers, in the round-the-clock service center "MosToner" refilling a laser cartridge Kyocera TK-1110 (1T02M50NXV) produced in just 4 steps:
On a note! Servicing Cartridges Kyocera at the specialists of the company "MosToner", you save not only your money, but also time. For example, the filling procedure 1T02M50NXV takes no more than 10 minutes!
Get a discount on refilling cartridge Kyocera TK-1110 (1T02M50NXV)
The MostToner SC presents some of the most affordable prices for refilling cartridges in Moscow. However, you can always count on additional discount if you find similar proposal at a lower price.
For regular customers and wholesale customers we have special loyalty programs. For details, please use the form or call the contact phone number.
To receive up-to-date information about current promotional offers, it is not necessary to regularly follow the news on home page site, for this it is enough to subscribe to the newsletter in the corresponding menu at the bottom of the screen.
Also, the service center "MosToner" regularly gives promo codes to your customers with individual discounts, with which you can save from a couple of hundred to several thousand rubles, depending on the frequency and cost of orders.
Attention! Promo codes must be entered during checkout as shown in the image.
