Why Lenovo phone may not turn on and how to fix it. Lenovo Lenovo a319 phone does not turn on does not start

What to do if it does not turn on lenovo phone?

If you encounter such a problem that the phone does not turn on Lenovo You need to do some diagnostics on your own. And, perhaps, you can fix the problem with your own hands at home, without contacting a service workshop. Of course, this depends on the complexity of the damage and therefore we suggest that you familiarize yourself with the most obvious reasons.

Full battery discharge

Due to non-compliance with the recharging mode, that is, when you continue to use the gadget with a minimum percentage of charge, a so-called deep battery discharge may occur. And then, when you connect the phone to a charger or PC, it will not show signs of life.

These devices simply do not recognize it, since the nominal value of the battery voltage has fallen below the minimum indicated on its marking. Connect the charger and leave it like that for a couple of hours.

Charger, power connector

You need to make sure that the smartphone is receiving power from the network. Inspect the charger completely. The power supply, cord, cord plugs on both sides must not have obvious damage. Check it out on another gadget. Examine the connector itself on the smartphone. Possibly a phoneLenovo A319, A328, A2010, S60, A6010and other models does not turn on due to non-contact when recharging.

Battery

A failed battery will also cause the phone to Lenovo turned off and won't turn on. Some models have a removable back cover, and some need to be removed using a certain heating and peeling technology.

But to inspect the battery and check its rated voltage is necessary. You can contact the smartphone service Lenovo where experienced specialists will accurately determine the cause of the defect.

Firmware update

Often, due to incorrect operation of the operating system Android malfunctions occur and you are faced with the fact that the Lenovo phone does not turn on. Reasons that contribute to this:

• the system does not have anti-virus protection;
• usage a large number applications from unknown developers;
• program garbage is not cleaned;
• phone memory is full.

Problems related to errors in the software are solved in three ways:

factory reset;

update or upgrade.

Flashing should be the last resort, but it eliminates most of the defects caused by platform functionality failures.

Power button, cable

Triggered power button on/off , a broken or oxidized cable also leads to the fact that the smartphone does not turn on Lenovo . Perhaps the sinuses of the button location are dirty and it needs to be cleaned. Without disassembling the gadget, such a problem cannot be eliminated.

Screen

Connect your gadget to a PC, is it detected by the system? If the computer sees it, then in this case, a matrix (display) defect is likely. The device itself is working, but the screen does not give an image. What preceded the manifestation of the problem that the phone Lenovo won't turn on? Was it a fall, a strong blow or moisture? Contact service center to specialists.

Mechanical damage and moisture ingress

Any careless action with the gadget will lead to negative consequences. Such mechanical damage as a fall or blow can cause damage that is corrected by expensive repairs. The same is the case with the ingress of liquids on the phone. It is necessary to take immediate action to prevent further oxidation of the elements inside the smartphone.

Most owners of modern gadgets have repeatedly encountered situations when the device malfunctioned or did not respond to commands. Unfortunately, almost all smartphones fail from time to time, regardless of manufacturer and price.

Today we will consider the problem when the lenovo phone does not turn on, and analyze the reasons for this.

Cell Phones lenovo often sin with problems in the software and hardware components, especially if we are talking about budget models. One of the most common is spontaneous shutdown and the absence of a subsequent reaction to various user actions. Although the situation seems scary at first glance, only in extreme cases will you need a service repair or replacement of your smartphone. The sources of these breakdowns are of three types:

• Hardware - a problem in the "iron" after falls, temperature jumps, tests by the sun, moisture and sand.
• Software - refers directly to the operating system, viruses and failures.
• External - most often a breakdown charger mistaken for a malfunction in the smartphone itself.

Let's take a closer look at the reasons why the Lenovo phone does not turn on, and how to solve them.

Trouble-shooting

In this section, we will look at the most common malfunctions due to which Lenovo does not turn on:

• Complete discharge of the battery and other related problems with the battery.
• Firmware update failures.
• Software problems.
• Virus attack.
• Mechanical damage to internal parts.

Full battery discharge

Battery problems can be temporary or permanent, and they different ways solutions:

Incorrect system update

From time to time, the Android OS firmware and its shell are updated, but failures may occur during the process. Often after installation new version system technology turns into a non-working "brick". However, do not rush to replace it with another model, this is solved by rolling back to the factory settings.

It is made with recovery mode. Three buttons are simultaneously pressed in the following sequence:

• Volume up rocker.
• Without releasing the previous one, the return key to the desktop.
• In parallel with them, the power on and off button.

A menu will appear on the screen. The pointer moves the volume rocker up and down, respectively. You must select an item factory reset, confirm the selection and wait for the process to complete.

If after that the smart does not work, then you need to contact a specialist, and he himself will be engaged in flashing the system.

Software failures

Even more often, Android-based cell phones do not start due to various kinds of software failures. The manufacturer and developers of the system have provided for such scenarios, therefore, it is advised to reset the settings in such cases. How to do it, we have already discussed above.

Please note that sequential key presses will not work on some models to start recovery mode. It is launched by a special button on the end of the case, which looks like a small hole, using a needle or a special pin that comes with the kit.

Viruses

Viruses are another popular cause of problems with Android technology. They get in by downloading files and applications from unknown sources, and can seriously damage the system data needed to run. Most likely, a flashing will be needed, which will completely delete the information. But in some cases, the service center specialists still take up the manual cleaning of the system storage from viruses and malware.

You can avoid this outcome by first downloading anti-virus software, such as Dr.Web or ESET.

Mechanical damage and moisture ingress

Consider the most popular types mechanical damage, which prevent the inclusion:

• Breakage of the screen (malfunctions of the cable, display or moisture ingress through the seams).
• The charging socket is dirty. Dust, fabric threads from clothes or crumbs get into it. you need to carefully, using a regular needle for this.
• Breakage of gadget contacts with batteries. It can be either oxidation or mechanical impact, which led to deformation.
• Damaged power button. If the device is new, then most likely it is a factory defect.
• The worst of the options is a burnt power controller that controls charging.

Conclusion

If the problem cannot be diagnosed, or it cannot be solved at home, the gadget must be taken to a service center. If it's under warranty, avoid tampering and apps that require superuser rights. And remember that only qualified technicians at certified repair points will be able to accurately diagnose the cause of the problem, and select better ways her decisions.

Video

The Lenovo A319 phone is one of the the best options for lovers of budget gadgets. The manufacturer has a good reputation, and the smartphone itself is quite inexpensive. Nevertheless, no matter how reliable the device is, one day you may encounter technical problems.

Many are worried about the question: what to do if the A319 does not turn on? And what if Lenovo a319 does not turn on and hangs on the splash screen? Many users of this gadget faced this problem. Since it is very common, we suggest that you familiarize yourself with the main options for solving it.

Option number 1. Reboot

We are all used to the fact that if some technique does not work, then it needs to be rebooted. And it is not at all necessary to find out why exactly it does not start or starts to turn on, but does not load to the end. There are a huge number of reasons for failures, and even experts cannot always name the problem that you encountered in a particular case.

So if the Lenovo A319 won't boot up or freezes when turned on, the best and easiest way to resolve the issue is to reboot your phone.

Have you tried restarting your device but that didn't help? Then repeat five more times. Getting the system to boot normally is not so easy, but multiple reboots in the vast majority of cases become successful.

You can also try holding down the home button and the power and volume keys at the same time. Some Lenovo models, including A 319, respond to such an impact and stop hanging.

The main advantage of these methods of solving the problem is the absence of any risk to the phone and the data stored on it. This is their main difference from the methods of returning the phone to life, which we will consider next.

Option number 2. hard reset

If an elementary reboot did not help, and still Lenovo a319 does not turn on or does not boot beyond the splash screen, you need to resort to more drastic measures. The best option- reset all settings, or, in other words, hard reset phone. To do this is quite simple - you just need to go into Recovery mode.

To make it easier for you to perform this procedure, we offer a simple algorithm:

1. Turn off the phone by pressing the power key for 10-15 seconds.
2. Simultaneously hold down the power and volume down keys. You can do this with one hand, but we recommend using both. There were cases when, through negligence, people dropped the device, trying to press both buttons with the fingers of one hand.
3. We are waiting for the manufacturer's logo to appear, and after a few seconds we get into Recovery mode.
4. Using the volume up and down buttons, select the "Wipe Data" item. It involves deleting all data and settings from the phone. Thus, whatever software problem you will most likely eliminate it.
5. The system will ask you if you really agree to the deletion of all data. Confirm the action and wait about a minute. Then you agree to reboot the device and wait for the updated software to be downloaded.

If all systems start up normally, and the phone functions the same as it worked before the problems occurred, then congratulations - you have found a relatively simple and painless way to solve the issue. If the phone still does not turn on, or the download does not go beyond the splash screen, it remains to resort to the third method.

Option number 3. flashing

The third method is the most radical, but you should definitely use it if the phone suddenly turns off, does not turn on or freezes. We act according to simple logic - if the system cannot be restored, then it should be replaced. In the case of computers and laptops, we usually reinstall operating system, and for phones, the firmware change works.

First, download the firmware to your computer, and then transfer it to the memory card installed in the phone. The firmware is downloaded as an archive, and you do not need to extract files from it. We throw it on the card in this form.

Now we go to Recovery in exactly the same way as in the previous case, that is, by holding down the power and volume buttons. If there are installation files on the memory card, the system will recognize them by offering you the following item: install zip from sdcard. Just it is needed if the phone turns off and we need to change the firmware. Confirm the action by starting the file upload.

The flashing usually takes a few minutes. Do not be alarmed if the phone turns off during it - this is quite normal. It can reboot, and repeatedly. And this is not a cause for concern.

After several reboots, the system will turn on, and, most likely, you will no longer see freezes and brakes. This means that the problem is in the past, and now you know how to turn on the phone, which started to slow down or does not turn on.