Obtaining drivers for the HP DeskJet F4180 MFP. Obtaining drivers for the HP DeskJet F4180 MFP Installing the hp deskjet f4180 printer
Complex Office equipment such as multifunction printers, requires the appropriate drivers to be installed on the system. This statement is especially true for older devices such as the HP DeskJet F4180.
The best solution would be to use the proprietary disk that came with the device, but if it is lost, the necessary software can be obtained using the Internet, as well as third-party programs.
Method 1: Manufacturer Web Portal
The software, which is placed on Hewlett-Packard branded product CDs, can also be downloaded from the company's official website.
- Go to the site from the link above. Find the menu in the resource header and click "Support" — "Programs and Drivers".
- Before you start searching for a device, you will need to select the category to which it belongs. MFPs are printers, so click on the appropriate button.
- Now you can start searching for software for our device. Enter the name of the desired MFP in the search engine line DeskJet F4180 and click on the result that appears below the line.
- Check the correctness of the definition of the operating system, as well as its bit depth. Set the correct values ​​if necessary.
- At this point, you can start downloading the drivers. Files available for download are located in the appropriate blocks. The most suitable option is indicated as "Full Feature Software and Driver for HP DeskJet Series MFPs"- download it by clicking on the button of the same name.
- Wait until the installation package is downloaded - run it, before connecting the MFP to the computer. After extracting the installer resources, select the option "Installation".
- In the next window, click "Further".
The rest of the operations take place without user intervention. Upon completion of the installation, the MFP will be completely ready for operation.
Method 2: Proprietary software from HP
Using the official website takes a lot of time and effort. To simplify your task, you can use the HP Support Assistant update utility.
- Follow the link above and use the button marked in the screenshot to download the utility installer.
- Install HP Support Assistant following the installer's instructions.
- The application will launch automatically after installation is complete. Click on option "Check for updates and messages".
The utility will start the process of detecting hardware and searching for software for it. Of course, this will require an Internet connection, the speed of which depends on the time spent.
- Then, in the list of devices, find your MFP and click "Updates" in the property block.
- Next, mark the desired software and install it.
The rest of the procedure takes place without user intervention. You don't even need to restart your computer - just connect to it multifunction printer and get to work.
Method 3: Third party software to update drivers
Except proprietary utilities like the HP Support Assistant mentioned above, there is a separate class of universal driver installers that work on exactly the same principle. These applications are also able to solve our today's problem. One of the best options is the DriverMax program, with detailed instruction on the use of which you can find below.
If this application does not suit you, then check out detailed overview other driverpacks prepared by one of our authors.
Method 4: Device ID
All properties of equipment connected to Windows are located in "Device Manager". In the corresponding section, you can find ID - a unique hardware name for each component. For the MFP, the driver for which we are looking for, this ID looks like this:
DOT4\VID_03F0&PID_7E04&MI_02&PRINT_HPZ
This code will help us in solving today's problem. The ways to use it are described in a separate extensive material, so we will not repeat ourselves and simply provide you with a link to the relevant article.
Method 5: System Capabilities
Means "Device Manager", mentioned in the previous method, also has the ability to download drivers on demand by the user. The procedure is simple: just open this Dispatcher, find in the list the right equipment, call context menu and select item "Update Drivers".
However, this is far from the only use case. "Device Manager" for such purposes. Alternative routes and more detailed description the main one is in the next guide.
This completes the description of the methods for downloading drivers for the HP DeskJet F4180. We hope that one of the provided methods suits you.
The driver is the connecting component between the computer and the printer. This program provides the ability to transfer data from a PC to peripheral devices. Without installing such software operation of the printer and any other peripheral device impossible. You can download the printer driver from our website.
Why drivers are needed
All external devices and internal components PCs need special software. The functions of the printer management utilities are:
- Processing read-write data and queuing requests.
- Checking print settings and handling them for errors.
- Checking the status of printers and initializing devices in the system.
- Energy consumption management.
- Registering and accounting printer print files.
- Issuing commands to control the printer.
- Checking the status of transactions and their completion.
If you bought a printer, then it usually comes with a software disc. But over time, this disk is lost, and the programs recorded on it become obsolete. Would you like to install the latest version of the printer driver? Please use this directory.
The managers of our site daily post the latest versions of drivers for all popular models of printing devices.
Why do you need to update your drivers to the latest versions?
Use of such software latest versions provides the following benefits:
- Stability. Unlike older drivers, newer versions of these software programs are more stable. Using them, you will have fewer problems with your computer and printer.
- Improve printer performance. The latest free printer drivers collected on this site have better functionality and various improvements. Developers can include new version Software improved energy saving, increased data processing speed, etc.
- Performance. Each subsequent version of the driver has better performance. This is the first parameter that developers pay attention to when creating a new version of such a program.
- Safety. Some hackers use drivers to access their victims' computers. When creating new versions of such programs, developers add protection and increase the security of their utilities.
Printing errors are not always related to the printer. They can also occur when there are violations in the operation of outdated drivers.
When should drivers be updated?
It is necessary to update the printer drivers when a problem occurs in the operation of the device. Such problems can manifest themselves in different ways. For example, the printer completely refuses to print or operating system"refuses to see him."
Before downloading the files, compare the version of your driver with the current version on our website. If they match, then updating the program does not make sense.
Driver needs to be updated after reinstalling Windows. Your installation disk may not have current version printer control utility. Therefore, after installing and configuring the operating system, you need to go to our website and download drivers for printers on Windows 7, 8, 10. Choose the version of this computer program that is right for your OS version.
How to install drivers?
To install or update printer management utilities, you must be familiar with the drivers. To do this, you need to call the "Control Panel". You can do this using the "Start" button. In the menu that appears, click on the required line.
In the "Control Panel" find the printer you need. Use the right mouse button to open the context menu and click the "Update driver" button. After that, tell the system the location of the downloaded file.
You can also update the printer management utility in manual mode. To do this, extract the files from the downloaded archive and run the setup file. After a few minutes, the driver will be installed and you will be able to use its work.
Possible driver issues
The driver is an important and integral part of the computer system. Failure in such computer program may cause the device controlled by the driver to stop responding to the operating system and crash.
Another problem that a computer owner may face is a driver conflict. This can affect the operation of not only the printer, but also the PC. Everyone knows about blue screen of death". One of the reasons causing this problem is driver conflict. You can solve it by rolling back the driver to the latest stable version. On our site you can download verified printer drivers that will help improve the performance of your document printing devices.
It is necessary to immediately print papers, but your HP Deskjet F4180 printer believes that the given is not already and immediately, denying the presence of the given to correctly respond to instructions? try to reinstall the drivers, in 9 from 10 situations this can help, but the complete procedure does not take more than 7-10 minutes. MFP.
How to install the driver
As previously established before, for this, in order to download the driver for the HP Deskjet F4180 printer and install it on your own PC, it is not necessary a large number of period and there is no need to call for the support of a specialized professional. complete method consists of some common steps:
1. Formation of a variation of the existing operator concept and its capacity. this presence of support for clicking the left mouse button on the "My Computer" icon and selecting the "Properties" tab is made.
2. selection of the necessary instruction file, which is located on our website and download it for yourself on your PC.
3. unpacking the file with the .exe extension. performed by pressing in pairs. the presence of this, a window will appear with the selection of the save zone of the previously scooped driver.
4. double click according to the installation file secured to the computer will drop the construction procedure, which will arise from familiarization with the license agreement and proof of one's own unity.
5. after this, another interactive window will appear with the "Install" button. By clicking on this button, the program for the printer will reign on your computer alone.
Please note that after this, as well as the driver becomes defined, it should be activated. for the purpose of this, you simply need to restart your PC or laptop.
On our website you will find not only utilities for various printer modifications, but also a large number of other required software, whose presence makes it possible to improve the service of the operator concept.
HP DeskJet F4180
Size: 219 MB
Bit depth: 32/64
Windows 7
Size: 245 MB
Bit depth: 32/64
Windows XP/Vista
Size: 17.1 MB (full) and 18.5 MB (basic)
Bit depth: 32/64
Driver installation in Windows 10
In order to start working with the HP DeskJet F4180 printer, you need to install the appropriate driver that will configure the computer to recognize and work with any external device. The installation procedure is simple and does not take much time - you can easily do it yourself. On our page you will find a handy instruction, where the whole process is described step by step with attached images.
Before installation, you will need to download the HP DeskJet F4180 driver - just above you will find the link you need. Run the driver, and a dialog box will open asking you if you need to install the driver - confirm the action by clicking "Install".
In the next step, you will need to allow all HP processes to run - allow by clicking "Next".
In the next window, you will be introduced to the specifics of the installation: information about the license agreement used, the proposed location for installing the program on your hard drive, as well as information about security. Accept the license agreement and installation options by ticking the appropriate box, and then click "Next" to proceed to the next step.
At this stage, you will be able to watch the printer being installed on your computer - follow the installation without clicking anything.
At the last step, plug the printer into an outlet, and its cable into a special connector on the computer, then press the start button on the printer. This way you will complete the installation, and do not click anything else: the program will complete the operation itself, which will be indicated in the next window.
You will see a message stating that the installation is complete, and to close the window you need to click on "Finish".
The printer has been successfully installed.
HP DeskJet F4180
Windows 8 / 8.1 / 10
Bit depth options: x32/x64
Driver size: 219 MB
Windows 7
Bit depth options: x32/x64
Driver size: 246 MB
Bit depth options: x32/x64
Driver size: 163 MB
Windows XP / Vista - Full Driver Pack
Bit depth options: x32/x64
Driver size: 50 MB
How to install a driver in Windows 10
In order to correctly configure the HP printing device, you need to install a driver program from the manufacturer. This manipulation is necessary so that the operating system can correctly send signals to the printer. The installation process is quite simple, but there are a few nuances that must be observed when using the installer.
The first thing we do is follow the hyperlinks that are located in the header of this article. This is required to download drivers for the HP DeskJet F4180 printer. After that, you need to find the downloaded file in the system folder and run it with administrator rights.
IN start page Click on the "Install additional software" button.
From the proposed installation options, click on the "Recommended" option.
If I get pop-up messages from the system with a suggestion to allow the installation of drivers, you must click on the "Yes", "Allow" button.
After copying the files and connecting the device, the program will automatically complete the setup and initialization of the equipment.
You must wait for the program window with a message about the completion of the process. When this is done, the printer can be used.
