home > A computer > How to update a blocked xbox 360. Ban

How to update a blocked xbox 360. Ban

Never being a gamer, I still took the console for fun. Why Xbox and not PS3? The answer lies on the surface - the possibility of unlocking. Let's not discuss the moral side of this action, don't feed the geek with bread - let's pick a new piece of iron.

Unlocking is not particularly difficult, but on the latest revisions of the console with drives from Lite-On ( FW Revision 93450C) you can not do without an iron mod to enter the drive into Vendor Mode. There are several ways to produce an iron mod - The MRA Hack, The Xecuter Probe II, The Xecuter LT Switch, Vampire & Rebuild Board, Vampire w/o Rebuild Board.

The MRA Hack - the simplest circuit, which you can assemble yourself at no extra cost. You will need a mounting knife, a couple of wires, a 20 ohm resistor and a switch to be able to quickly break the contact. The big minus of this method is that after the firmware it will be necessary to restore all the cut tracks on the printed circuit board.

I chose the most rational and cheapest option - Xecuter LT Switch. The plus is that after soldering over the native board and unlocking the console, you don’t need to restore anything, just move the switch to the Normal position from the Read / Write mode. This decision cost me about 4 GBP, excluding shipping in some English online modding store.

There are still a couple of unresolved issues. Firstly, I don’t have a monitor at home, secondly, I don’t have Windows on any of the computers, and thirdly, all my computers are portable, so there is nowhere to connect the SATA cord. Well, Aspire Revo works as a home server for me, a couple of issues are solved from here, we output the image via HDMI to a TV set, and we connect the drive to Revo eSATA-SATA with a cord. What to do with Windows? Debian GNU/Linux works on Revo and somehow I didn't feel like repartitioning, putting Windows in the neighborhood. No problem! There are wonderful distribution kits just for such a case from aleks200059, windows working from a USB drive. Wonderful!

Ordered Xecuter LT Switch, XCM 360 Case opening tool and eSATA-SATA lace. The Russian Post, as always, slows down, but nothing, we have nowhere to rush, the console is taken for fun, not for games. Packages take an unusually long time from all over Asia, the last package arrived 61 days after the order, if my memory serves me right. From England the package arrived in a couple of weeks. It seems that the last six months, parcels from China and Hong Kong have been deliberately slowed down, but oh well ...

The console was disassembled in 10 minutes using the XCM 360 Case opening tool, although it turned out to be easy to do without it. While disassembling, I noted to myself what a typical PC assembly the console has, I already want to cry. Microsoft is Microsoft ... Take an example from the same Sony, or something. The next day the drive was taken to work. It is disassembled in a couple of minutes, you need to unscrew 4 screws on the bottom cover of the drive, disconnect 3 cables and unscrew 2 screws on the board. By sliding the latch to the right, we can pull out the board and start working on it.

We cut the paths and clean the areas in the places indicated in the photo:

We solder overlay:

With help soldering station the drive was soldered pretty quickly without any problems at lunchtime. Ringing tracks with peace of mind collected the drive and carried it home. Yes, be careful when connecting cables, with great difficulty I managed to connect a wide cable, it enters the connector very tightly, I was afraid to break it, but everything worked out. Two narrow ones connect without any problems.

Let's get to the breakdown

We move the switch on the Xecuter LT Switch to the Normal position and connect the drive to the SATA cord. We insert the power cord, the main thing is not to confuse the position of the power connector, when disassembling it is best to mark with a marker in which position it is connected. Turn on the console.

Download Jungle Flasher latest version, launch and go to the MTK Flash 32 tab. The drive did not want to be detected, as a result it worked only in SATA Mode - Native IDE, not in AHCI. For those who are not in the know, this mode is set in the BIOS.

Power off the console. We translate the switch on the Xecuter LT Switch to the R / W position, press the button in the program Intro/Device ID, on the question asked we answer Yes. Turn on the power button again and move the switch on the Xecuter LT Switch to the Normal position. After that, your drive will enter Vendor Mode, and the Serial flash will be in the status 0x72.

Now we press the button read and save the read original firmware of the drive. Save this firmware in a safe place! You will still need it if you suddenly decide to change the drive again. The read firmware will automatically be loaded into the FirmwareTool 32 tab after you press the button Yes.

The read key will be automatically spoofed from the original firmware to the modified one, in my case it is iXtreme Lite Touch (LT) 1.1.

How it looks on the screen:

We press the button Write and waiting for the status Write Verified OK!, this means that all 4 memory banks have been successfully flashed.

Now we need to bring the drive from Vendor Mode to normal mode, for this we press the button Outro/ATA Reset.

That's it, your drive will be flashed. Turn off the console, unplug SATA cable from a PC, connect the native SATA cable from the set-top box, turn on the console and test the freshly flashed drive. OK it's all over Now. We assemble the console and use it for its intended purpose. Good luck!

If you want to play pirated games on Xbox 360, you will need to flash your device to install a special software, which will allow you to play unlicensed games. The Xbox 360 flashing method depends on the model of your DVD device. We will tell you how to properly flash your Xbox 360 DVD drive.

Steps

Part 1

How to eject DVD drive from Xbox

Update your Xbox. Before disassembling the device and starting the firmware, you need to make sure that the Xbox 360 is updated to the latest version. This is necessary so that the device that we will use for flashing is compatible with your Xbox.

Look at the firmware manual for more information. Instructions can be found on the Internet, in particular, on the wiki-how site.

Open your Xbox 360 device. To flash a DVD drive, you need to pull it out of the box. To do this, you need to remove the front panel of the Xbox.
- To find out how to open the case of your Xbox device, find instructions online or on the wiki-how site.
Remove the DVD drive. Gently grasp the DVD drive with your hands and pull it towards you, removing it from the case. Make sure all cables are disconnected.

Disable DVD drive. After you take it out, unplug the two power cables that connect it to the Xbox. You can now pull the device completely out of the Xbox case.

Determine the manufacturer of the DVD drive. There are 4 choices of DVD drive manufacturers whose devices are used in the Xbox 360. Some DVD drives require more attention than others because they are more difficult to open and remove. Look at the sticker that is on the surface of the drive. It should have the manufacturer's name on it.
- It can be either Lite-On, Samsung, BenQ, or Hitachi.
Part 2
Download JungleFlasher.
1. You will need a program to flash the device. You can download the program from the Internet. We recommend using a program called JungleFlasher, which is made specifically for flashing an Xbox 360 device. You can download it for free from the developer's website.
  - You will also need some programs to help you with the files on your disk. Download the iXtreme LT+ 3.0 software from the iXtreme website. The JungleFlasher program does not include this program for legal reasons. This program modifies the operation of the DVD drive on the Xbox 360, allowing you to install custom software on it.
  - If you are going to flash a Hitachi DVD drive, you will need to download a special version of Hitachi's iXtreme LT+ 3.0.
2. Extract the files from the JungleFlasher folder to your computer. After you download the file with the program, extract the files from the archive so that you can access them on your computer. You do not need to install JungleFlasher to use the program. It is enough to unzip the files from the folder to any folder on your computer to have access to them.
  
  Copy the files to the JungleFlasher directory. After you extract the files from the JungleFlasher archive, extract the files from the iXtreme LT+ 3.0 archive to the same folder. Open the folder called Firmware. Copy all files to the Firmware folder in the JungleFlasher directory.
  
  Copy the required dll files. Open the JungleFlasher directory and open the libusb folder. Copy the libusb0.dll file from this folder and paste it into the JungleFlasher root directory. That is, to the same place where the JungleFlasher.exe file is located.
  - Open the PortIO folder and copy both files to the JungleFlasher root directory.
Part 3
Connect the DVD drive to your computer.
Part 4
DVD drive firmware
Select the manufacturer of your DVD drive, and then proceed to the appropriate step:
Samsung
Hitachi
BenQ
Lite-On

Samsung DVD drive firmware

Hitachi drive firmware
1. Launch JungleFlasher. After you connect the DVD drive to USB and to your computer, launch the JungleFlasher program.
  
  Check which version of the Hitachi drive you have. Click on the button. If you have version 78/79 you need to write down one additional disk to unlock your drive. Click on the "Insert the 79 Unlock Audio CD" button. A browser will open with a new file upload page. Download the file and save it on your computer. Extract the files from the saved folder.
  - Burn the downloaded bin file to an empty CD-R.
2. Turn on mode B. In the tab, click on the button (enable mode B). a new window with instructions will appear. If you are using a USB connector, ignore the instructions.
  
  Insert a disc. after you turn on mode B, press the button to open the disc drive. Insert a disc and press the button. Click on the button to read the disc. When the disc is finished reading, the drive will open automatically. Take the disc.
  - This step only needs to be performed by those with a version 79 drive.
3. Perform a data reset. In the "Flashing Options" section, select the "Dump Drive" option, and then click on the (read source) button. save backup file on your computer, in case you need to restore the original firmware.
  
  Save the drive key. Click the button and save it to your computer.
  
  Perform drive firmware. Return to the tab, select the "Flash LT-Plus" option in the firmware settings. Click on the button. Click the button to confirm the firmware of the device.

The MRA Hack- the simplest scheme that you can assemble yourself at no extra cost. You will need a mounting knife, a couple of wires, a 20 ohm resistor and a switch to be able to quickly break the contact. The big minus of this method is that after the firmware it will be necessary to restore all the cut tracks on the printed circuit board.

We cut the paths and clean the areas in the places indicated in the photo:

We solder overlay:

With the help of a soldering station, the drive was soldered quite quickly without any problems at lunchtime. Ringing tracks with peace of mind collected the drive and carried it home. Yes, be careful when connecting cables, with great difficulty I managed to connect a wide cable, it enters the connector very tightly, I was afraid to break it, but everything worked out. Two narrow ones connect without any problems.

Let's get to the breakdown

We download the latest version of the Jungle Flasher program, launch it and go to the MTK Flash 32 tab. The drive did not want to be detected, as a result it worked only in SATA Mode - Native IDE, not in AHCI. For those who are not in the know, this mode is set in the BIOS.

Power off the console. We translate the switch on the Xecuter LT Switch to the R / W position, press the button in the program Intro/Device ID, we answer the question Yes. Turn on the power button again and move the switch on the Xecuter LT Switch to the Normal position. After that, your drive will enter Vendor Mode, and the Serial flash will be in the status 0x72.

The read key will be automatically spoofed from the original firmware to the modified one, in my case it is iXtreme Lite Touch (LT) 1.1.

How it looks on the screen:

We press the button Write and waiting for the status Write Verified OK!, this means that all 4 memory banks have been successfully flashed.

Now we need to bring the drive from Vendor Mode to normal mode, for this we press the button Outro/ATA Reset.

That's it, your drive will be flashed. Turn off the console, disconnect the SATA cable from the PC, connect the native SATA cable from the set-top box, turn on the console and test the freshly flashed drive. OK it's all over Now. We assemble the console and use it for its intended purpose. Good luck!

Hi all. More recently, we were going back in time when we were talking about the game console. Today we will talk about a newer toy called Xbox360 and how to hack it.

If you are tired of spending a lot of money on games for your Xbox360, then it's time to think about hacking the console. On the this moment there are three ways to bypass protection game console xbox360. Each of them allows you to run games from discs or completely abandon them. Let's take a closer look at the pros and cons of each method.

Drive Firmware

The cheapest hacking method, the average cost of which is 1500-2000 thousand rubles. The masters take this money for hacking the drive, because. flashing a completely new drive will not work. First, you will have to crack its protection, which will allow you to replace the original firmware with a pirated one. After this procedure, you only need to update the firmware from time to time. The average cost of this service is 500 rubles. You will need to update the firmware no more than once a year. With a flashed drive, you can play online on Xbox Live, but only until you get banned. When this will happen, no one knows. Some manage to avoid a ban for several years, but most fly into it in the first month.

X360Key

This method of hacking appeared relatively recently. Does not require soldering. It consists in connecting the set-top box to the motherboard via the Sata interface of a special board. A remote control with a display is connected to the board itself. To run games, an external media is used: flash drive, external HDD connected via USB port to the remote control. Price X360KEY is 3500 rubles.

Installing the device is extremely simple. The developers claim that with their device you can not be afraid of a ban on Xbox Live, you just need to update the device firmware in a timely manner. Despite this plus, X360KEY cannot be recognized best method hacking. Absence additional features in addition to launching pirated games, as well as the need to use external media, make this method irrelevant at its price. FreeBoot is another matter.

Freeboot

Probably the best of all XBox360 hacks. Allows you to run games directly from . There is not ? No problem! With Freeboot, it is possible to download any games, of any region, to the hard drive of the set-top box, using a Lan cable, or without it, via Wi-Fi. Thanks to emulators, it becomes possible to play Sega, Dendy and early games. Xbox versions. Where do these opportunities come from? For installation freeboot , on the motherboard prefix soldered a special chip that controls the power of the processor. This allows you to download a pirated version operating system prefixes (DashBoard). The pirated dashboard has a lot of useful gadgets, for example: the ability to control the fan speed, an ftp client for connecting the set-top box to a PC, as well as various temperature sensors displayed on the main panel...

Of the minuses this method Only two hacks can be noted: an instant ban on Xbox Live and an increase in console startup time up to 30 seconds. The installation of FreeBoot itself is quite complicated. In addition to the chip that is soldered into the console board, you need to install and properly configure the related software. In this connection, the cost of work ranges from 2500 to 3500 thousand rubles.

Having chosen the most suitable way to hack the console, the next thing you need to decide is how you will hack. You can do everything yourself, or contact a specialist. Currently, there are a whole bunch of detailed step by step instructions for each of the hacking methods. But, nevertheless, we advise you to contact the master, because. in the case of installing FreeBoot, soldering is required, and when flashing the drive, you will need to drill the drive chip. In case of an error, you can kill the drive, or, even worse, the console. But if you like to take risks, then go for it! However, you can install the X360Key yourself. All that is required of you is to plug a couple of wires into the motherboard of the set-top box. Agree, it is not reasonable to give 500 rubles for such a primitive work.

If you do not want to take responsibility for the work, then you have a direct road to the master. You can contact both a private specialist and a service center. In both cases, you need to be careful and attentive. The best choice will contact the service center, where you will be issued a safe receipt for your set-top box. And in the event that your console suffers during operation, the company will be legally responsible for this. When contacting the service center, carefully read the contract. Check that it spells out the responsibility that the company bears in case something happens to your console. Make sure these terms and conditions satisfy you. Do not forget about the safe receipt, it must have the company's seal. Very often, service centers give a guarantee for their work, which is good plus. Look for reviews on the Internet about the workshop you are interested in. Try to be responsible for the choice, otherwise your prefix may be the price of an error.

In large cities, finding a good service center is not a problem. But what if you live in a provincial town, where there are just a few workshops? The only way out is to turn to private traders.

A private trader is not bad. Many masters who have been working for several years value their reputation. Their work is sometimes cheaper than in service center. A good craftsman will replace a part that has failed through his vein, or pay for the purchase of a new one. Some masters, just like service workshops, give a guarantee for their work. But here it all depends on the conscientiousness of the performer, because. you, of course, will not receive any documents obliging the master to serve you after receiving payment.