What additional features are provided? Local computer networks
Free medical care under compulsory health insurance in Russia is provided in accordance with the compulsory medical insurance programs: Basic and Territorial.
The basic compulsory medical insurance program is developed and approved by the Government Russian Federation. In 2007, free medical care in Russia is provided in accordance with Decree of the Government of the Russian Federation of December 30, 2006 N 885 “On the Program of State Guarantees for Providing Free Medical Care to Citizens of the Russian Federation for 2007.” The territorial is developed and approved by the administration of the constituent entity of the Russian Federation.
The basic compulsory medical insurance program includes a minimum list of requirements for free medical care provided at the expense of compulsory medical insurance funds, which is mandatory throughout Russia. The territorial compulsory health insurance program is a list of requirements mandatory for the entire territory of a constituent entity of the Russian Federation. At the same time, the types, volumes and conditions for the provision of medical services within the framework of the Territorial Compulsory Medical Insurance Program may differ in each subject, but they cannot be lower than the level of the Basic Program.
Moscow city compulsory medical insurance program
In the capital, medical care to citizens insured under compulsory medical insurance is provided in accordance with the Moscow city compulsory medical insurance program (hereinafter referred to as the compulsory medical insurance program), which is integral part the currently valid Territorial program of state guarantees for the provision of free medical care to the population of the city of Moscow (approved by the Decree of the Moscow Government of 03/07/2006 N 157-PP "On the City Targeted Health Care Development Program "Capital Healthcare" for 2006-2007.") .
Its goal is to provide citizens insured under compulsory medical insurance with free medical care of a guaranteed volume and appropriate quality in healthcare institutions and organizations operating in the compulsory health insurance system of the city of Moscow.
What kind of assistance is provided?
As part of the Compulsory Medical Insurance Program, citizens insured under compulsory medical insurance, including children, in Moscow healthcare institutions operating in the capital's compulsory medical insurance system, regardless of their organizational and legal form, are provided free of charge:
- Outpatient care, including measures for prevention (including preventive vaccinations, preventive examinations and dispensary observation of the population), diagnosis (including in diagnostic centers) and treatment of diseases in the clinic, at home and in day hospitals of all types.
- Inpatient care:
- for acute diseases and exacerbations of chronic diseases, poisoning and injuries requiring intensive care, round-the-clock medical supervision and isolation for epidemiological reasons;
- during planned hospitalization for the purpose of diagnosis, treatment and rehabilitation, requiring round-the-clock medical supervision;
- in case of pathology of pregnancy, childbirth and abortion;
- during the neonatal period.
When providing inpatient medical care and medical care in day hospitals of all types, medicinal care is provided in accordance with federal regulatory and administrative documents and documents of the Moscow Government.
In accordance with the Compulsory Medical Insurance Program, measures are taken for diagnosis, treatment (except for expensive high-tech types of medical care financed from the budget), disease prevention, including preventive vaccinations, preventive examinations (including preliminary examinations upon entry into work and periodic examinations of persons, a list of categories which are determined by the Moscow Government) and dispensary observation, including healthy children, as well as the prevention of abortion.
Medical care provided from budgets of all levels
In addition to medical care provided at the expense of compulsory medical insurance, certain types of medical care are provided to citizens of Moscow at the expense of budgetary funds.
At the expense of the federal budget:
- specialized, including high-tech, medical care provided in federal specialized medical organizations within the volumes (quotas) of expensive (high-tech) medical care allocated for Moscow residents by the relevant order of the Ministry of Health and social development RF and Russian Academy of Medical Sciences;
- additional medical care, including provision of certain categories of citizens with necessary medicines, provided in accordance with Chapter 2 of the Federal Law “On State Social Assistance”.
At the expense of the Moscow city budget:
- emergency;
- specialized (sanitary and aviation) emergency medical care;
- primary health care in outpatient, inpatient and hospital organizations, including for women during pregnancy, during and after childbirth;
- specialized medical care for sexually transmitted diseases, tuberculosis, acquired immunodeficiency syndrome, mental and behavioral disorders, drug addiction diseases, certain conditions arising during the perinatal period (provided in medical organizations of the city of Moscow in accordance with the nomenclature of medical organizations approved by the Ministry of Health and social development of the Russian Federation);
- high-tech types of medical care, the list of which is approved by the Moscow Department of Health.
Expenditures of the city budget include the provision of medical organizations in the city of Moscow with medicines and other means, medical products, immunobiological preparations and disinfectants, as well as donated blood and its components.
In accordance with the legislation of the Russian Federation and the legislation of the city of Moscow, additional measures are taken to provide medical care and drug provision for certain categories of citizens.
In addition, the provision of medical care, the provision of medical and other services in healthcare organizations included in the nomenclature of medical organizations approved by the Ministry of Health and Social Development of the Russian Federation, including in centers for combating acquired immunodeficiency syndrome, is financed in the prescribed manner from the capital budget. , children's and specialized sanatoriums, forensic medical examination bureaus, medical statistics bureaus, blood transfusion stations, family planning and reproduction centers, orphanages, hospices.
Methodological materials
Comment on the article "Free medical care"
More on the topic "Free medical care":
Changes in healthcare - consequences of the destruction of the Soviet Union
I have already written [link-1] about proposals to change the Constitution under the pretext of the inability to finance free healthcare. Then the proposal came from the Research Institute of Healthcare Organization and Medical Management. Now the Ministry of Finance has joined the promotion of paid medicine [link-2], offering to charge for things that have become habitual medical services– limit the number of free doctor calls to your home and free treatment from highly qualified specialists. IN...
The amount of assistance in this case will be greater. Emergency help It turns out the same for everyone. And even obstetric care for non-citizens in Russia is completely free. I know about obstetrics and helping children.
offers family support services: Advisory assistance; Psychological help; Pedagogical assistance; Health care. We provide a range of medical, psychological and pedagogical services aimed at the rehabilitation of the child and family...
Here's the phone number. hotline to help with the placement of orphans, there a lawyer will answer your question and may recommend a point of law for your “strange” guardianship. during sanatorium-resort treatment, during medical examinations, medical examinations, medical...
"The Girl and the Giraffe"
The publishing house "Nigma" has a new product - Valentin Gurov's fairy tale "The Girl and the Giraffe" with illustrations by Mikhail Skobelev. As a child, any of us could easily talk to a giraffe. Now we won’t notice the giraffe, even if she looks into our window. What happened? Has your point of view changed or the desire to notice has disappeared? Fortunately, children will not let us live in peace without giraffes in the window, and children's books will help us correctly determine the point of view. “The Girl and the Giraffe” is a story about friendship, about how no...
Medical examination of persons wishing to adopt children left without parental care is carried out within the framework of the program of state guarantees of free medical care to citizens in the manner established...
For those living in the Primorsky Territory, free medical care for 2009.... 1. Outpatient care includes all types of outpatient care allowed in outpatient settings for children, adolescents, and adults
On the procedure for providing medical care to children and pregnant women - residents of the Russian Federation in 1.2. Provide free baby food to assigned children under 2 years of age, children from large families under 3 years of age...
Persons admitted to a medical institution for emergency medical care without compulsory medical insurance policy or passports and unidentified during the treatment period...
Where and how do you get medical care?. Experience in adoption/guardianship/foster care. Adoption. In Moscow, these children have the right to free medical consultations, etc. (at least such benefits are assigned to them by Moscow law number 61 or 60).
In accordance with the Program of State Guarantees for the provision of free medical care to citizens of the Russian Federation in the territory of XXXXX for 2006, medical examinations for the adoption of young children and registration...
Disabled children have the right to free or reduced-price medical care, including medications. The federal law"ABOUT social protection disabled people in the Russian Federation."
standalone computer?
A COMPUTER NETWORK is a system of computers connected by information transmission channels. A local network (within a premises or an enterprise) allows users not only to quickly exchange information, but also to more efficiently use the resources of networked computers: external memory, printing device, scanner and others technical devices, as well as software. Global networks connect many local networks, as well as autonomous computers of users. The size of global networks is not limited. There are corporate, national and international global networks. A local network is the connection of two or more computers, allowing them to work together with programs and data. LOCAL NETWORKS are small computer networks working within the same premises, one enterprise. If in local network There are no special computers designed to manage the network, then the network is called peer-to-peer. Users independently decide which resources of their computer to make available to other network users. Such networks have one drawback: poor security of information from unauthorized access. To ensure greater security on the local network, one computer is allocated, on which the most important information. Such a computer is called a server. Access to information on the server is controlled by one person - the network administrator. General scheme connecting computers to a network (topology) can be different. A variant of connecting computers when a cable runs from one computer to another, connecting computers in series and peripherals between themselves is called LINEAR BUS. If each computer is connected to a separate cable from one central node, then a local network of the STAR type is implemented. Typically, with this connection scheme, the central node is a more powerful computer. There are other MODELS OF DIFFERENT LOCAL NETWORK CONFIGURATIONS. A detailed analysis of each of them in class will take a lot of time. I suggest preparing a message for the next lesson. Local network computers are usually located close to each other and use a common set network equipment and are managed by one package software.Every computer or printer connected to a local network must have a network card. The main function of a network card is to transmit and receive information from the network. Local networks can be either wired or wireless. In wired networks, the connection is made using twisted pair cables. Wireless ones use an access point as a central network device, and each computer must have a special Wi-Fi type wireless network card installed. IN operating system Windows computers, connected to the local network are displayed in the folder network.
The concept of a byte is inextricably linked with the concept of a bit. A bit is the minimum unit of measurement of the amount of information that corresponds to one of the physical states of matter used to encode information. The most striking example is the so-called “blanks” - CDs and DVDs, on which an empty zone is clearly visible where information has not yet been recorded (it looks lighter) and a dark zone where information is recorded. So, the recorded zone consists of two types of grooves, which reflect the laser beam differently. Depending on this, when reading, these different types of grooves are interpreted as a zero and a one. Unwritten space can be interpreted as Null (Nil) - absence of information.
So, a byte is the number of bits that can be processed by one or another type of processor in one clock cycle. Due to the greatest popularity of processors that processed exactly 8 bits of information at a time, a byte is traditionally called a volume of information of 8 bits in size, although in various computer systems there are other byte sizes.
And the number of bits contained in a byte determines the number of variants of numbers that can be encoded using this number of bits using the formula 2 to the power of N, where N is the number of bits contained in a byte. For example, eight bits can encode 2 to the eighth power or 256 numbers, such as the numbers 0 to 255 (unsigned) or -128 to 127 (signed).
The science of computer science deals with the processing of information presented in the form of numbers. Letters are numbers that determine the position of the character image in a certain table (code page). Colors are also represented by a certain number of bits (1, 2, 4, 8, 15, 16 and 24) to display, respectively, 2, 4, 16, 256, 32768, 65536 and 16777216 color images. The number in this case denotes either the color number in a predetermined color palette (1, 2, 4 and 8-bit color), or a combination of the luminous intensity values of the three primary colors, with the help of which the image is formed on the monitor screen - RGB (Red). , Green - green and Blue - blue). This is called an additive system for forming color on a black background. When printing from white paper, colors are subtracted by overlaying turquoise, violet and yellow flowers(CMY - Cyan, Magenta and Yellow). To obtain an accurate black color, instead of overlaying all three colors, a separate black color (blacK) is usually used. In a 16-bit color palette, for Green colour One extra bit is used because the human eye is most sensitive to shades of green.
Therefore, a byte is essentially either a number from -127 to 128, or a number from 0 to 256, or a character code, or a code for one or more color dots, provided the color is represented in 1, 2, 4 or 8 bit format. or the value of one of the three color components when indicating the color of a point in 15, 16 or 24 bit format for representing color.
Modality - programming
Documents in the archive:
o Local computer networks are the topic of the lesson,
o Computer science and ICT subject,
o Ugrinovich N.D. Computer science and ICT: textbook for grade 9 / N.D. Ugrinovich.-2nd ed., revised. - M.: BINOM. Knowledge Laboratory, 2009.-295 p. : ill.
www.5byte.ru – “Informatics for five” (Informatics and ICT)
www.klyaksa.net - Information and educational portal for computer science and ICT teachers “Computer science and information and communication technologies at school”
http://www.videouroki.net - “Video lessons on the Internet”
‹ ›
Document's name Lesson summary.doc
Municipal budgetary educational institution
“Secondary school No. 18 named after Hero of the Soviet Union
Eduard Dmitrievich Potapov"
Lesson summary on the topic:
"Local computer networks"
for 9th grade
teacher Zatsepina Elena Mikhailovna
Goals:
Educational:
introduce the concept of local computer network,
teach how to transfer data over a local network;
Developmental:
develop cognitive interest,
development of group work skills,
computer skills, self-control;
Educating:
education of accuracy, discipline, perseverance.
During the classes
1. Organizational moment.
Hello, please sit down. Let's get ready for active work Let's put our pens and notebooks in front of us and concentrate. Let's start the lesson.
2. Checking homework. Frontal survey. Solving problems using options.
In the last lesson we started studying communication technologies. Let's review the material.
3. Preparing students for active and conscious learning of new material.
When working on personal computer V offline mode users can exchange information (programs, documents, etc.) using optical disks and flash memory. However, moving storage media between computers is not always possible and can take quite a long time. It was necessary to look for ways to solve this problem.
4. Explanation of new material.
The creation of computer networks is caused by the practical need of users of computers remote from each other for the same information, quick access to information resources other computers, as well as printers and other peripheral devices. Networks provide users with the ability to even simultaneously process the same documents on computers located at a relatively short distance.
Recording the topic in a notebook. Today in class we will get acquainted with the structure of local computer networks.
After studying the topic, you will learn
what is a computer network;
about the types, structure, principles of functioning of a computer network;
what hardware and software are required for the functioning of computer networks;
how to exchange data on a local network.
A COMPUTER NETWORK is a system of computers connected by information transmission channels.
A local network (within a premises or an enterprise) allows users not only to quickly exchange information, but also to more efficiently use the resources of networked computers: external memory, printing device, scanner and other technical devices, as well as software.
Global networks connect many local networks, as well as autonomous user computers. The size of global networks is not limited. There are corporate, national and international global networks.
A local network is the connection of two or more computers, allowing them to work together with programs and data.
(Write in a notebook.) LOCAL NETWORKS are small computer networks operating within one room, one enterprise.
If there are no special computers on the local network designed to manage the network, then the network is called peer-to-peer. Users independently decide which resources of their computer to make available to other network users. Such networks have one drawback: poor security of information from unauthorized access.
To ensure greater security, one computer is allocated on the local network, on which the most important information is usually stored.
Such a computer is called a server. Access to information on the server is controlled by one person - the network administrator.
The general scheme for connecting computers to a network (topology) may be different.
A variant of connecting computers, when a cable runs from one computer to another, sequentially connecting computers and peripheral devices to each other, is called LINEAR BUS. If each computer is connected to a separate cable from one central node, then a local network of the STAR type is implemented. Typically, with this connection scheme, the central node is a more powerful computer.
There are other MODELS OF DIFFERENT LAN CONFIGURATIONS. A detailed analysis of each of them in class will take a lot of time. I suggest preparing a message for the next lesson.
Computers on a local network are usually located close to each other, use a common set of network equipment, and are managed by the same software package.
Local networks can be either wired or wireless. In wired networks, the connection is made using twisted pair cables. Wireless ones use an access point as a central network device, and each computer must have a special wireless network card Wi-Fi type.
In the operating room Windows system computers connected to the local network are displayed in the Network Neighborhood folder.
5. Consolidation of the studied material. Practical work.
Show students the location of the network folder with the task: “Network environment - share on school”, it contains the folder “9th grade” - “Communication technologies” - “PR. How does a local network work?
Each student at the computer answers a question from the list. (The teacher distributes prepared questions on sheets of paper.) He needs to type the question given by the teacher in Microsoft Office Word and save it in network folder“Works for school” - “Local computer network” under your name. The teacher checks the finished files on his computer.
6. Home Exercise. Theory- .
Complete in notebook or upload to
7. Summing up. Grading. Reflection.
Do you agree that
Local networks These are associations of computers concentrated in a small area, usually within a radius of no more than 1–2 km. (Yes)
Fiber optic cables can transmit data in analog rather than digital form. (No)
A user of a peer-to-peer network can have access to the resources of all computers connected to it if these resources are not protected from unauthorized access) (Yes).
In a star topology, if a server fails, the network continues to function. (No)
Access to information on the server is controlled by one person - the network administrator. (Yes)
In the Windows operating system, computers connected to the local network are displayed in the Network Neighborhood folder. (Yes)
Red - today I didn’t learn anything new, I didn’t understand anything, the new material won’t be useful to me;
Yellow - I learned something new, I didn’t understand everything, I will put the new material into practice;
Green - I was interested, I learned a lot of new things, I will put the material into practice in the next lessons.
How does a computer network work?
When working on a personal computer in offline mode, users can exchange information (programs, documents, etc.) using floppy disks, optical disks and flash memory. A system of computers connected by information transmission channels is called computer network.
The creation of computer networks is caused by the practical need for quick access to the information resources of other computers, as well as printers and other peripheral devices.
Local networks
Small computer networks operating within one room, one enterprise, are called local networks ( PM).
Local Area Networks (LAN) - these are associations of computers concentrated in a small area, usually within a radius of no more than 1–2 km, although in some cases a local network can be more extensive, for example, several tens of kilometers. IN general case A local area network is a communication system owned by one organization.
In many schools, computer science classrooms are equipped with local networks.
Every computer or printer connected to a local network must have a network card. The main function of the network card is to transmit and receive information from the network.
Local networks can be either wired or wireless. In wired networks, the connection is made using different types of cables.
Coaxial cable there are two types : thin and thick. These cable types are the same as standard TV cable.
"Twisted Pair" (twisted pair) is a copper-based cable that combines one or more pairs of conductors in a sheath. Each pair consists of two isolated copper wires. Cables of this type often differ greatly in the quality and ability to transmit information.
Shielded twisted pair(Shielded Twisted Pair,STP) Well protects transmitted signals from external radiation, and also reduces power losses in the cable in the form of radiation. The presence of a screen requires high-quality grounding during installation work, which complicates and increases the cost of cable systems.
Cable tounshielded twisted pair(Unshielded Twisted Pair,UTP) are currently the main data transmission medium for non-optical technologies. Good electrical and mechanical characteristics, combined with ease of installation and relatively low cost, make UTP cable ideal for building a horizontal system.
Optical cable can transmit data with very high throughput. Optical fiber has a high capacity for transmitted data and is resistant to electromagnetic and radio frequency interference. Made from a bundle of glass or plastic strands, fiber optic cable uses light to transmit data.
Fiber optic network has a number of advantages over a conventional copper cable network (although a fiber-optic network is more expensive, and fiber is a more fragile material; in addition, fiber-optic cable is more difficult to split than copper).
Firstly, Fiber optic networks carry large amounts of data due to their higher bandwidth.
Secondly, fiber optic cables are thinner and lighter than copper cables and are more noise resistant than them.
Third, data can be transmitted over them in digital rather than analog form.
Fourth, fiber optic cables are free of electromagnetic radiation, which is ideal for meeting the stringent standards required of today's television and computer applications.
All of these advantages are ideally suited to the requirements for transmitting radio and television signals.
IN wireless networks An access point is used as a central network device, and each computer must have a special Wi-Fi-type wireless network card installed.
If all computers on the network have equal rights, that is, the network consists only of user workstations, then it is called a peer-to-peer network.
Peer-to-peer networks are used to implement the first of the noted goals - file sharing. Each computer on such a network has its own name.
More oftenLAN with dedicated server are organized according to the following principle: there is one central machine, which is called a file server. Local network users are usually called working group, and the computers they work on areworkstations.
The central machine has large disk memory. It stores software and other information in the form of files that can be accessed by network users.
The name "server" comes from English server and is translated as “service device”.
Server computer - it is a machine that distributes shared resources among many users.
Exist two main goals using local networks:
1) file sharing between network users;
2) use shared resources, available to all network users: large space disk memory, printers, centralized database, software and others.
Questions for practical work
Which additional features are provided to users when working on computers connected to a local network, compared to working on a standalone computer?
At what distance are computers usually located on a local network?
What is the difference between peer-to-peer LANs and server-based networks?
The principle of organizing a local network with a dedicated server?
What types of local networks do you know?
What device is needed to connect a computer to a local network?
What is the feature of copper based cable?
How does shielded twisted pair differ from unshielded cable?
What are the advantages of a fiber optic network?
What is the operating principle of wireless networks?
What are local networks used for?
‹ ›
Document's name Local computer networks.pptx
‹‹ ‹
1 of 32
› ››Description of the presentation by individual slides:
Slide no. 1
Slide description:
Repetition of the topic “Data transmission”, their throughput (information transfer speed). the amount of information that can be transmitted over it per unit of time. The main characteristic of information transmission channels is... 2. The channel capacity is...
Slide no. 2
Slide description:
Review of the topic “Data transmission” in bits per second (bps) and multiples of Kbps and Mbps. However, sometimes the unit is byte per second (byte/s) and its multiples KB/s and MB/s. 2.I = v*t I – amount of information transmitted; v – channel capacity (information transmission speed); t – information transmission time. 4.Usually throughput is measured by 3. 1.I = k*i 3.I = i*x*y 4.N = 2
Slide no. 3
Slide description:
Solving GIA problems Option 2 A file of 4 KB in size is transmitted through a connection at a speed of 2048 bits per second. Determine the file size (in bytes) that can be transferred in the same time over another connection at 512 bits per second. In your answer, indicate one number - the file size in bytes. There is no need to write units of measurement. Option 1 A 9 KB file is transferred over some connection at a speed of 1536 bits per second. Determine the file size (in bytes) that can be transferred in the same time over another connection at 512 bits per second. In your answer, indicate one number - the file size in bytes. There is no need to write units of measurement.
Slide no. 4
Slide description:
Answers to GIA problems Option 1 I1=V1 x t1, t=I1/V1= =9 Kbyte/1536 bit/s = =9 Kbyte x1024 byte x x 8 bit/1536 bit/s= =73728 bit/1536 bit/s= =48 s, I2=V2 x t2=512bit/s*48s= =24576 bits=3072 (bytes) Option 2 I1=V1 x t1, t=I1/V1= =4 KB/2048 bit/s= =4 KB x1024 byte x x 8 bit/2048 bit/s = =32768 bit/2048 bit/s= =16 s, I2=V2 x t2= 512 bit/s*16 s= =8192 bit = 1024 (byte)
Slide no. 5
Slide description:
When working on a PC in offline mode, users can exchange information only by copying it to floppy disks or CD ROM drives. MOving DISKS BETWEEN COMPUTERS CAN TAKE A LONG TIME!
Slide no. 6
Slide description:
Local computer networks Computer telecommunications MBOU Secondary School No. 18 named after E.D. Potapova
Slide no. 7
Slide description:
After studying the topic, you will learn what a computer network is; about the types, structure, principles of functioning of a computer network; what hardware and software are required for the functioning of computer networks; how to exchange data on a local network.
Slide no. 8
Slide description:
What is a computer network A COMPUTER NETWORK is a system of computers connected by information transmission channels. A local network (within a premises or an enterprise) allows users not only to quickly exchange information, but also to more efficiently use the resources of networked computers: external memory, printing device, scanner and other technical devices, as well as software. Data transmission line Local networks Global networks Global networks connect many local networks, as well as autonomous user computers. The size of global networks is not limited. There are corporate, national and international global networks.
Slide no. 9
Slide description:
LOCAL NETWORKS (LAN) LOCAL NETWORKS are small computer networks operating within one room, one enterprise. A user of a peer-to-peer network can have access to the resources of all computers connected to it (if these resources are not protected from unauthorized access). A network with a dedicated server is organized according to the following principle: there is one central computer (server) and many smaller computers connected to it. powerful computers- workstations. The central machine usually has a larger amount of external memory; devices that are not on workstations are connected to it (printer, scanner, modem for accessing the global network, etc.). P2P NETWORK NETWORK WITH DEDICATED SERVER Server
Slide no. 10
Slide description:
Bus A single cable is used along which all computers on the network are connected. A terminator is needed to absorb the transmitted signal at the ends. Simplicity If one computer fails, this will not affect the operation of the others. At any given time, only one computer can transmit data. A cable break leads to the termination of the network. large quantities computer network is slow Disadvantages: Advantages: terminator terminator Topology networks - general computer connection diagram on a network
Slide no. 11
Slide description:
Star Server Disadvantages: Advantages: Network management is centralized (there is a special central device (hub), from which “rays” go to each computer, i.e. each computer is connected to its own cable). If one computer fails, the network remains operational. If a server fails, the network stops functioning. For large networks, cable consumption increases significantly.
Slide no. 12
Slide description:
Ring Signals are transmitted along the ring in one direction and pass through each computer (closed network). Advantages: Disadvantages: The cable does not have a free end and therefore does not need a terminator. Each computer amplifies the signals by transmitting them to the next computer. If one computer fails, the entire network stops functioning.
Slide no. 13
Slide description:
Hardware networks To organize a local network, you need to install a network card in each PC and connect all computers using a special cable.
Slide no. 14
Slide description:
Cables Coaxial cable - transmission speed up to 10 Mbit/s Twisted pair - transmission speed up to 100 Mbit/s Network hardware Fiber optic cable - transmitting information over long distances Coaxial cable comes in two types: thin and thick. These types of cable are similar to standard television cable. A twisted pair is a copper-based cable that combines one or more pairs of conductors in a sheath. Each pair consists of two insulated copper wires twisted around each other. Cables of this type often differ greatly in quality and information transmission capabilities. Shielded Twisted pair (Shielded Twisted Pair, STP) well protects transmitted signals from external radiation, and also reduces power losses in the cable in the form of radiation. The presence of a screen requires high-quality grounding during installation work, which complicates and increases the cost of cable systems on unshielded twisted cable. Unshielded Twisted Pair (UTP) is currently the main data transmission medium for non-optical technologies. Good electrical and mechanical characteristics combined with ease of installation and relatively low cost make UTP cable ideal for building a horizontal system. Optical cable can transmit data with. very high throughput. Optical fiber has a high capacity for transmitted data and is resistant to electromagnetic and radio frequency interference. Made from a bundle of glass or plastic strands, fiber optic cable uses light to transmit data. A fiber-optic network has several advantages over a conventional copper network (although fiber-optic networks are more expensive, and fiber-optic cables are more fragile; fiber-optic cables are also more difficult to split than copper cables). First, fiber optic networks carry large amounts of data due to their higher bandwidth. Secondly, fiber optic cables are thinner and lighter than copper cables and are more noise resistant than them. Thirdly, data can be transmitted digitally rather than analogue. Fourth, fiber optic cables contain no electromagnetic radiation, which is ideal for meeting the stringent standards required of today's television and computer applications. All of these advantages are ideally suited to the requirements for transmitting radio and television signals.
Slide no. 26Slide description:
Questions of practical work What additional opportunities are provided to users when working on computers connected to a local network, compared to working on a stand-alone computer? At what distance are computers usually located on a local network? What is the difference between peer-to-peer LANs and server-based networks? The principle of organizing a local network with a dedicated server? What types of local networks do you know? What device is needed to connect a computer to a local network? What is the feature of copper based cable? How does shielded twisted pair differ from unshielded cable? What are the advantages of a fiber optic network? What is the operating principle of wireless networks? What are local networks used for?
Slide no. 27
Slide description:
Homework Theory - http://www.5byte.ru/9/0033.php Do it in a notebook or upload to www.dnevnik.ru http://files.dnevnik.ru/file.aspx?user=372034&file=14527892
Slide no. 28
Slide description:
Do you agree that Local networks are associations of computers concentrated in a small area, usually within a radius of no more than 1–2 km. Fiber optic cables can transmit data in analog rather than digital form. A user of a peer-to-peer network can have access to the resources of all computers connected to it if these resources are not protected from unauthorized access). In a star topology, if a server fails, the network continues to function. Access to information on the server is controlled by one person - the network administrator. In the Windows operating system, computers connected to the local network are displayed in the Network Neighborhood folder.
Slide no. 29
Slide description:
Lesson summary A local network unites computers installed in one room (for example, a school computer lab consisting of 8-12 computers) or in one building (for example, in a school building several dozen computers installed in different subject rooms can be combined into a local network ). Local computer network LAN (Local Area Network, LAN) is a computer network covering a relatively small area. Each computer connected to the local network must have a special card (network adapter). Computers between each other ( network adapters) are connected, for example, using cables. Local networks can be peer-to-peer or with a dedicated server. General computer connection diagram (topology): bus, star.
Slide description:
Information resources http://www.5byte.ru/9/0033.php http://www.klyaksa.net/ http://www.nsportal.ru/ermolaeva-irina-alekseevna http://delay-s- nami.ru/?p=225 http://school-collection.edu.ru/
Slide no. 32
Slide description:
To download the material, enter your E-mail, indicate who you are, and click the button
Municipal budgetary educational institution
Vishnevskaya secondary school No. 2
Lesson summary on the topic:
"Local computer networks"
for 9th grade
teacher Belousova Natalya Vyacheslavovna
Goals:
Educational:
- introduce the concept of local computer network,
- teach how to transfer data over a local network;
Developmental:
- develop cognitive interest,
- development of group work skills,
- computer skills, self-control;
Educating:
- education of accuracy, discipline, perseverance.
During the classes
1. Organizational moment.
Hello, please sit down. Let's get ready for active work, put pens and notebooks in front of us and concentrate. Let's start the lesson.
2. Checking homework.Frontal survey. Solving problems using options.
In the last lesson we started studying communication technologies. Let's review the material.
3. Preparing students for active and conscious learning of new material.
When working on a personal computer in offline mode, users can exchange information (programs, documents, etc.) using optical disks and flash memory. However, moving storage media between computers is not always possible and can take quite a long time. It was necessary to look for ways to solve this problem.
4. Explanation of new material.
The creation of computer networks is caused by the practical need of users of computers remote from each other for the same information, quick access to the information resources of other computers, as well as printers and other peripheral devices. Networks provide users with the ability to even simultaneously process the same documents on computers located at a relatively short distance.
Recording the topic in a notebook.Today in class we will get acquainted with the structure of local computer networks.
After studying the topic, you will learn
- what is a computer network;
- about the types, structure, principles of functioning of a computer network;
- what hardware and software are required for the functioning of computer networks;
- how to exchange data on a local network.
A COMPUTER NETWORK is a system of computers connected by information transmission channels.
A local network (within a premises or an enterprise) allows users not only to quickly exchange information, but also to more efficiently use the resources of networked computers: external memory, printing device, scanner and other technical devices, as well as software.
Global networks connect many local networks, as well as autonomous user computers. The size of global networks is not limited. There are corporate, national and international global networks.
A local network is the connection of two or more computers, allowing them to work together with programs and data.
(Write in a notebook.) LOCAL NETWORKS are small computer networks operating within one room, one enterprise.
If there are no special computers on the local network designed to manage the network, then the network is called peer-to-peer. Users independently decide which resources of their computer to make available to other network users. Such networks have one drawback: poor security of information from unauthorized access.
To ensure greater security, one computer is allocated on the local network, on which the most important information is usually stored.
Such a computer is called a server. Access to information on the server is controlled by one person - the network administrator.
The general scheme for connecting computers to a network (topology) may be different.
A variant of connecting computers, when a cable runs from one computer to another, sequentially connecting computers and peripheral devices to each other, is called LINEAR BUS. If each computer is connected to a separate cable from one central node, then a local network of the STAR type is implemented. Typically, with this connection scheme, the central node is a more powerful computer.
There are other MODELS OF DIFFERENT LAN CONFIGURATIONS. A detailed analysis of each of them in class will take a lot of time. I suggest preparing a message for the next lesson.
Computers on a local network are usually located close to each other, use a common set of network equipment, and are managed by the same software package.
Local networks can be either wired or wireless. In wired networks, the connection is made using twisted pair cables. Wireless ones use an access point as a central network device, and each computer must have a special Wi-Fi type wireless network card installed.
5. Consolidation of the studied material. Practical work.
Show students the location of the network folder with the task: “Network environment - share to school”, it contains the folder “9th grade” - “Communication technologies” - “PR. How does a local network work?
Each student at the computer answers a question from the list. (The teacher distributes prepared questions on sheets of paper.) He needs to type the question given by the teacher into Microsoft Office Word and save it in the network folder “Works at school” - “Local computer network” under your last name. The teacher checks the finished files on his computer.
6. Home Exercise. Theory- http://www.5byte.ru/9/0033.php.
Complete in notebook or upload towww.dnevnik.ru
7. Summing up. Grading. Reflection.
Do you agree that
- Local networks These are associations of computers concentrated in a small area, usually within a radius of no more than 1–2 km.(Yes)
- Fiber optic cables can transmit data in analog rather than digital form.(No)
- A user of a peer-to-peer network can have access to the resources of all computers connected to it if these resources are not protected from unauthorized access)(Yes).
- In a star topology, if a server fails, the network continues to function.(No)
- Access to information on the server is controlled by one person - the network administrator.(Yes)
- In the Windows operating system, computers connected to the local network are displayed in the Network Neighborhood folder.(Yes)
Red - today I didn’t learn anything new, I didn’t understand anything, the new material won’t be useful to me;
Yellow - I learned something new, I didn’t understand everything, I will put the new material into practice;
Green - I was interested, I learned a lot of new things, I will put the material into practice in the next lessons.
Practical work
How does a computer network work?
When working on a personal computer in offline mode, users can exchange information (programs, documents, etc.) using floppy disks, optical disks and flash memory. A system of computers connected by information transmission channels is calledcomputer network.
The creation of computer networks is caused by the practical need for quick access to the information resources of other computers, as well as printers and other peripheral devices.
Local networks
Small computer networks operating within one room, one enterprise, are called local networks ( LS).
Local Area Networks (LAN)- these are associations of computers concentrated in a small area, usually within a radius of no more than 1–2 km, although in some cases a local network can be more extensive, for example, several tens of kilometers. In general, a local network is a communication system owned by one organization.
In many schools, computer science classrooms are equipped with local networks.
Every computer or printer connected to a local network must have a network card. The main function of the network card is to transmit and receive information from the network.
Local networks can be either wired or wireless. In wired networks, the connection is made using different types of cables.
There are two types of coaxial cable: thin and thick. These types of cable are similar to standard television cable.
"Twisted pair"is a copper-based cable that combines one or more pairs of conductors in a sheath. Each pair consists of two insulated copper wires twisted around each other. Cables of this type often differ greatly in quality and information transmission capabilities.
Shielded Twisted Pair (STP)Well protects transmitted signals from external radiation, and also reduces power losses in the cable in the form of radiation. The presence of a screen requires high-quality grounding during installation work, which complicates and increases the cost of cable systems.
Unshielded Twisted Pair (UTP) cableare currently the main data transmission medium for non-optical technologies. Good electrical and mechanical characteristics, combined with ease of installation and relatively low cost, make UTP cable ideal for building a horizontal system.
Optical cablecan transmit data with very high throughput. Optical fiber has a high capacity for transmitted data and is resistant to electromagnetic and radio frequency interference. Made from a bundle of glass or plastic strands, fiber optic cable uses light to transmit data.
Fiber optic networkhas a number of advantages over a conventional copper cable network (although a fiber-optic network is more expensive, and fiber is a more fragile material; in addition, fiber-optic cable is more difficult to split than copper).
Firstly , Fiber optic networks carry large amounts of data due to their higher bandwidth.
Secondly , fiber optic cables are thinner and lighter than copper cables and are more resistant to interferencecompared to them.
Third , data can be transmitted over them in digital rather than analog form.
Fourth , fiber optic cables are free of electromagnetic radiation, which is ideal for meeting the stringent standards required of today's television and computer applications.
All of these advantages are ideally suited to the requirements for transmitting radio and television signals.
On wireless networksAn access point is used as a central network device, and each computer must have a special Wi-Fi-type wireless network card installed.
If all computers on the network have equal rights, that is, the network consists only of user workstations, then it is called a peer-to-peer network.
Peer-to-peer networks are used to implement the first of the noted goals - file sharing. Each computer on such a network has its own name.
More often LAN with dedicated serverare organized according to the following principle: there is one central machine, which is called a file server. Local network users are usually called a work group, and the computers they work on are calledworkstations.
The central machine has large disk memory. It stores software and other information in the form of files that can be accessed by network users.
The name "server" comes from English server and is translated as “service device”.
Server computer -it is a machine that distributes shared resources among many users.
Exist two main goalsusing local networks:
1) file sharing between network users;
2) use of shared resources available to all network users: large disk space, printers, centralized database, software and others.
Questions for practical work
- What additional features are available to users when working on computers connected to a local network, compared to working on a standalone computer?
- At what distance are computers usually located on a local network?
- What is the difference between peer-to-peer LANs and server-based networks?
- The principle of organizing a local network with a dedicated server?
- What types of local networks do you know?
- What device is needed to connect a computer to a local network?
- What is the feature of copper based cable?
- How does shielded twisted pair differ from unshielded cable?
- What are the advantages of a fiber optic network?
- What is the operating principle of wireless networks?
- What are local networks used for?