Connecting the printer via a wireless network. Connecting the printer wirelessly Where to find the wps pin code
2) Using wireless network WiFi.
In this article, I will describe in detail how to do this with using Wi-Fi. This method requires wifi router(more precisely, a configured Wi-Fi network) with Internet access and the TV itself that supports Wi-Fi connection. Whether your TV supports a wireless connection, you can check the technical documentation for the TV or the information on the TV's official website. If your TV does not support wireless network but does support Smart TV, you can purchase USB WiFi adapter for your TV model and thus provide yourself with a wireless connection.
What gives a TV connection via Wi-Fi ?! First of all, it frees you from unnecessary work, namely, pulling a network LAN cable from the router, sometimes it is very difficult. But if you have low speed the Internet, then WiFi connection will not be for you The best way, because no matter how good your router is, in any case, during wireless transmission, the Internet speed is lost and it may not be enough for the comfortable operation of Smart TV, in this case you'd better connect TV with LAN cable .
In this article, I will take a closer look at how to set up the Internet on a TV. LG with WebOS, but a similar setting will be on other TVs - Philips, Samsung, Sony etc.
First of all, you need to go to the TV settings, for this, if you have a regular TV remote control, press the "Settings" button.
If the path is Remote magic, press the "Input" button.
And in the TV menu, select the gear icon.
From the menu, select "Network" - "Connect to a Wi-Fi network".
A window will open in which you will see all the available wireless networks and the different ways to connect to them. I propose to analyze each of the methods separately.
Connecting the TV to Wi-Fi by entering a password.
I suggest starting from popular way by entering the wireless network password. To do this, select the network you want to connect to.
Enter your network password and click Connect.
As a result, you will see a checkmark appear next to your Wi-Fi network.
And in the Network menu, in the "Connect to a Wi-Fi network" field, the line "Connected to the Internet" will appear.
Connecting the TV to a hidden network.
If your wireless network is hidden, select "Set up hidden Wi-Fi" network from the connection menu.
Enter a network name, then select a security type and enter a password if the network is password protected.
Set up your TV to connect to a wireless network using WPS.
WPS(Wi-Fi Protected Setup) is a standard developed by the Wi-Fi Alliance (Wi-Fi Alliance) to simplify the process of setting up and connecting to a wireless network. In particular, for this method, you do not need to know the password from the Wi-Fi network at all, the main thing is to have physical access to the router.
To connect your TV to a wireless network using this method, select "Connect using WPS - PBC" from the TV menu.
Then no later than 2 min. press the WPS button on the router. Most routers have this feature enabled by default, but it's best to connect to the router's web interface and check it out.
After a few seconds, your TV will connect to your Wi-Fi network.
Connecting the TV to Wi-Fi using WPS-PIN.
For this method, select the appropriate item in the TV menu "Connect using WPS-PIN".
A code will appear on the TV screen, which must be entered into the router settings.
Connect to the web interface of the router, find the settings related to WPS, for example, on TP-Link routers, there is a separate WPS item, select it and click the "Add device" button.
After that, enter the password specified on the TV (if the password has already disappeared, repeat the action and select "Connect using WPS-PIN", the New Password different from the first).
After that, you should see a window about the successful connection of the device.
Conclusion.
As you may have noticed, connecting a TV to a Wi-Fi wireless network is a very simple task that even a child can handle. But sometimes there are problems connecting the TV to Wi-Fi, in order to fix them, try the following steps:
1) Turn off and on the router and try again;
2) Reset the router settings to factory settings and reconfigure;
3) Update the firmware of the router;
4) Update software TV via USB flash drive.
Video connecting TV to the Internet using LAN, Wi-Fi.
The procedure for connecting a printer to a computer is constantly being improved. Previously, printing devices required an LPT port, then they switched to a universal USB interface. Today you can connect your printer via Wi-Fi and not worry about extra wires.
At the same time, the quality or speed of printing will not deteriorate - a wireless connection provides exactly the same capabilities as a standard connection using a cable.
Using the WPS protocol
The easiest way to connect a printer via Wi-Fi is to use the WPS method, which, although not very secure, provides a fairly stable connection. When setting up the printer in this case, neither the network name nor its access code is required.
Terms of Use:
- The printer and router must support WPS technology.
- The wireless network must be secured using WPA or WPA2 (WEP will not work). Since these two encryption standards are recommended and most used, there will be no problems with choosing them.
- Turn off MAC address filtering on your router.
How can I tell if my printing device supports a WPS connection? The most logical way is to look in the specification or on the official website of the manufacturer.
If you have determined that WPS connection is not an unknown technology for your printing device, you can begin the process of establishing a wireless network connection.
To connect via WPS, you will need a PIN code, which can be found on a sticker located on the bottom of the printer. The PIN must be eight digits and be located next to the WPS icon.
The next step is to enable WPS on the router. You can find an item that allows you to carry out this operation in the router interface on the “Wireless” or “Wi-Fi” tab. Use the built-in search to quickly find the item you need. Enable WPS and save the new router configuration.
Some router models have a hardware key, pressing which activates the WPS function. If you have such a router, be sure to click on this button before trying to pair devices. A similar button may be on the printer - you also need to press it. 
If your printing device does not have a hardware WPS enable button, enable this feature using the keypad. An example path looks like this:
Network - Wireless - Wi-Fi Protected Setup.
If the connection is successful, the indicator light on both devices will turn on.
Connection setup wizard
If WPS technology does not suit you, you can use another method, which is to work with the built-in wireless connection setup wizard.
The main condition is that the printing device must be able to work with the connection setup wizard.
How to define it? If the printer supports WEP or WPA authentication mode, then it will definitely have a built-in tool for quick creation wireless network connections.
What information do you need:
- The encryption key, which is the access code for the wireless network.
- Wireless network name "SSID".
So, you managed to connect the router and set up a wireless network. Now you need to connect the printer to the computer using a Wi-Fi connection. To perform this operation, you will have to work a little with the settings of the device for printing.
After completing these simple steps, the printer will be connected to your computer wirelessly. Make sure the connection is correct by sending a document to the printer.
What is the purpose of the WPS button on the router and how to set up a wireless connection yourself? Wi-Fi Protected Setup (WPS) is a specially developed technology that makes it easy to set up a Wi-Fi wireless network and allows even a person who is not very versed in this matter to connect such devices without problems and the slightest risk. The setup process itself won't take long. You just need to figure out where the WPS button is on the router and click on it.
Now it remains only to wait until the connection is established between wireless devices. There are two types of connections - hardware way connections and software connection method.
1. Hardware connection - WPS button on the router or adapter.
If your wireless router has a “WPS” button (on TP-Link routers, this button is called QSS), then you can limit yourself to a minimum of actions. What needs to be done to enable the WPS function on your router? Just find this button and click on it. It is located on the body of the device.
After that, perform a similar operation on the Wi-Fi adapter with which you want to establish a connection. The button should be pressed once and held for three to four seconds (no more). We wait a couple of minutes for the devices to communicate with each other.
It should be noted that the name (identifier) of the network will remain the same, but a new password will be created for the network, it is generated randomly. Please note that on some models of wireless routers there is no WPS button on the router itself, and its functions have been transferred to the Reset button ( hard reset settings).
When pressing this button, you should be especially careful. If you hold it in this position for more than five seconds, you can lose all settings. They will be reset to factory settings.
2. WPS software connection.
Not always devices that support Wi-Fi Protected Setup have a corresponding button on the body. But the minimum settings have already been made in them (see below), and there is a separate section in the instructions. You can activate this feature using the PIN code found on the label located on the router. If necessary, the PIN code can be found in the web interface of the device. Locate the wireless network icon on your computer. By clicking on it, you will see a list of all available networks. Select your router and click Connect.
The connection wizard will start. Here you will need to enter your PIN. Then click "Next" and wait. The computer will connect to the wireless network. It should be said that if there are no primary settings on the router, after entering the pin code, the Wi-Fi settings window will open.
You will need to enter the SSID, specify the type of encryption and the Security Key. Do not forget to write down or remember the key, you will need it when connecting other devices to the network.
Examples of enabling the WPS function on various routers.
How to enable WPS on a router programmatically on different types of routers? Regardless of manufacturer and model network device, the first step is to find the tab responsible for pairing.
TP Link. We go to the main menu, we find the section "QSS" (WPS). Look carefully, the status should be "Enable". The current pin code that you will need to connect is indicated in the "Current PIN" line.
If you are not satisfied with this PIN code, then it is quite possible to generate a new one. To do this, simply click on the button "Create a new PIN" (Gen New PIN).
Asus. To enable the Wi-Fi Protected Setup function on this device, go to the "Wireless Network" section and select the "WPS" tab. Be sure to make sure that your "Enable WPS" switch is in the "ON" position.
WPS (Wi-Fi Protected Setup) is a standard developed by Wi-Fi equipment manufacturers that makes it easy to connect to a wireless network. With the help of WPS, any user can quickly and easily set up a secure Wi-Fi network without delving into the technical details and encryption settings. When connecting via WPS, the network name (SSID) and encryption method (WPA/WPA2) are automatically set, which are usually entered manually.
Setting up a Wi-Fi network is usually done in two steps:
- Setting up the router;
- Connecting your devices to the created Wi-Fi network.
WPS setup
Consider an example wifi settings network using WPS technology on a Windows 7 computer (WPS only works from Windows Vista SP2 and Windows 7) and a WPS-enabled wireless access point Tenda W309R. The WPS setup process for other Tenda devices is exactly the same.
After connecting the router, look at the list of wireless networks. A network should appear in it with a name similar to Tenda_1A3BC0. Let's join her.
When connecting to a wireless network with no encryption, as in our case, Windows will prompt you to configure the router. Click OK and do the setup. (If you do not need the setting, you can simply connect to the network by pressing Omena).
To make further settings, you will need to enter PIN code. Often, the PIN code can be found on a sticker located on the device itself (router, access point), it consists of 8 digits (it can then be changed in the router settings). Enter your PIN and press Further.
If the PIN code was entered correctly, you will see Windows window to configure access point settings. You need to enter the parameters of your Wi-Fi network:
- Network name
- Encryption type
- Security key (password)
The network parameters shown in the figure are appropriate, but change the network name to your own (it must be entered in English letters and must not contain spaces).
After finishing the setup, the setup wizard will remind you of the security key (see the picture below). At this point, your computer is already connected to a Wi-Fi network and the hotspot is set up.
After we have successfully configured the access point, let's connect to it from another computer that also has Windows 7 installed. Open the list WiFi networks and find your network in it. Connect to her.
In order to connect, you need to enter the network key or press the button on the device itself if your router supports the PCB (Push Button Configuration) method. Press the button and in a couple of seconds you will be connected to your Wi-Fi network.
The WPS button is usually located on the front, back, or side of the device. Some manufacturers combine the WPS button and the reset button, so be careful. In the case of overlap, the effect of pressing the button is determined by the time it is held (1-2 seconds). If you hold it longer, 5-7 seconds, a reset will occur. Be careful.
You have just set up Wi-Fi without using the WEB interface of the router, and now you know how you can connect to a wireless network by pressing just one button on the device panel.
WPS is a very useful and convenient technology. Now you will know what this PCB button is on your device and how to use it.
Configuring the printer using WiFi Protected Setup (WPS)
The Wi-Fi Protected Setup (WPS) feature allows you to quickly set up your printer for
wireless network without entering a name, password (WPA passphrase, WEP key) and others
wireless network settings.
Note. Use the WPS function to set up a wireless network, only
if your wireless network is using WPA encryption. If for
WEP encryption is applied to the wireless network or not at all
encryption, use another method to set up the printer for
wireless network provided in this section.
Note. To use WPS, make sure your wireless router is
or the wireless access point supports WPS encryption. Routers with
WPS support, usually have a button
(WPS) or a button labeled WPS.
You can set up the printer using WPS using one of the following methods.
With the push of a button. Use the button
(WPS) or button with
WPS label on the router, if available.
With a PIN. Enter the PIN generated by the printer in the program
router settings.
How to Connect a Printer with the Press of a Button
Setting and
select Net.
Touch WiFi Protected Setup
When prompted, select Button press.
On your wireless router or wireless access point, press and
hold down the WPS button for 3 seconds. Wait about 2 minutes. At
successful printer connection indicator wireless communication stop flashing and
will glow.
How to connect a printer using a PIN code
On the printer control panel, touch (right arrow), Setting and
select Net.
Touch WiFi Protected Setup and follow the instructions on the screen.
When prompted, tap Pin. The WPS PIN will appear on the display.
Run the setup utility or program to wireless router or
wireless access point, and then enter the WPS PIN.
Note.Additional information for the setup utility, see
router or wireless access point documentation.
Wait about 2 minutes. When the printer is successfully connected, the indicator
wireless connection will stop flashing and remain lit.
Setting up the Printer Using the Embedded Web Server
If the printer is connected to a network, you can set up a wireless connection using
use the printer's Embedded Web Server.
1.
Open the embedded web server. For more information, see How to
access the built-in web server.
On the tab Start in field Setting click Wireless Setup Wizard
networks.
Follow the instructions on the screen.
Annex D
