home > Internet > iPhone 6s proximity sensor. What to do if the proximity sensor on your iPhone doesn't work? Reset all data and settings

iPhone 6s proximity sensor. What to do if the proximity sensor on your iPhone doesn't work? Reset all data and settings

What to do if the proximity sensor on your iPhone doesn't work?

The proximity sensor in the iPhone is one of the main elements of the phone. It is needed for:

adjusting the display backlight during calls;
to dial a number;
to enable the Siri voice service;

Accordingly, users cannot use all of the above functions if the proximity sensor on the IPhone does not work. The constantly backlit screen during a call is a particular inconvenience. Due to a non-working sensor, buttons and icons are pressed, which can interrupt the call.

Causes of malfunction

A non-working sensor may be due to:

mechanical damage (due to a fall or impact of the iPhone);
train wear;
Excessive amounts of dust getting on the sensor;
moisture getting into the phone case. In this case, you should disassemble the phone and dry all the display components separately;
Problems after firmware update.

Note! In some cases, the inactivity of the sensor may occur due to the cover that covers it. Poor quality protective glass may also interfere with the proximity sensor operation.

Firmware rollback

Often a problem with the sensor appears after installing updates. Developers do not always have time to fix all the bugs. If you don't want to wait new version firmware with the solution, you can roll back the OS to the previous version. Follow the instructions to return previous version OS:

connect your device to your PC and open the iTunes application;

Clamp Shift key on personal computer and at the same time click on “Restore iPhone”. In the OS X operating system, you need to hold down the Alt button;

Select the most recent backup. Wait until the components are installed. It will take no more than 40 minutes.

The sensor stopped working after replacing the display - solution

If you changed the iPhone screen and after that the proximity sensor stopped working, this indicates that the position of its frame was violated. As a result, the sensor cannot perform its function. You can correct the position of the element yourself. Disassemble the phone (use only tools designed for iPhone - picks, pentagonal screwdriver, suction cup, Phillips screwdriver, spudger). Unpin back cover device, first disconnecting all motherboard cables.

Find the proximity sensor holder:

Remove the sensor frame and reinstall it. Remember, the element must be located exactly in the frame of the case.

A correctly installed frame is shown in the figure:

Replacing a cable in an iPhone

Thanks to the instructions described below, you can replace a non-working sensor yourself. Before purchasing a new cable, pay attention to its markings. The original product contains digital and symbolic codes, QR codes and inscriptions of the manufacturer with the corresponding symbols. A genuine iPhone cable looks like this:

As a rule, a breakdown can only be corrected by replacing the cable part. It contains a mechanism front camera phone and proximity sensor. Unfasten the back cover from the iPhone display module and begin replacing the part.

Place the module on a flat surface and unscrew the screws shown in the figure:

Disconnect the top speaker cover and then the speaker itself.

Using a spudger, disconnect the front camera and proximity sensor cables.

Using tweezers, carefully remove the sensor (painted in purple tint) from the cable and replace it with new part. You can also replace the entire cable.

In many cases, this component fails if the smartphone is damaged as a result of a fall or other physical impact; often the sensor breaks due to the negative influence of moisture or software errors that occur in the system.

To find out whether the sensor is really faulty, try updating the operating system, and then check the operation mobile device. Rolling back iPhone 6 to previous version BY. If these actions do not have the desired effect, the smartphone will need to replace the proximity sensor.

Sometimes users try to fix the problem on their own, however, this problem is a complex one. For repairs, please contact our service center. Replacing the iPhone 6 proximity sensor is done using components High Quality. Extensive experience and modern technical equipment of the workshop allow us to solve assigned tasks quickly and efficiently!

Fair, not overpriced and not underestimated. There should be prices on the Service website. Necessarily! without asterisks, clear and detailed, where technically possible - as accurate and concise as possible.

If spare parts are available, up to 85% of complex repairs can be completed in 1-2 days. Modular repairs require much less time. The website shows the approximate duration of any repair.

Warranty and responsibility

A guarantee must be given for any repairs. Everything is described on the website and in the documents. The guarantee is self-confidence and respect for you. A 3-6 month warranty is good and sufficient. It is needed to check quality and hidden defects that cannot be detected immediately. You see honest and realistic terms (not 3 years), you can be sure that they will help you.

Half the battle is Apple repair- this is the quality and reliability of spare parts, so a good service works with suppliers directly, there are always several reliable channels and your own warehouse with proven spare parts for current models, so that you do not have to waste extra time.

Free diagnostics

This is very important and has already become a rule of good manners for the service center. Diagnostics is the most difficult and important part of the repair, but you don't have to pay a penny for it, even if you don't repair the device based on its results.

Service repairs and delivery

Good service We value your time, which is why we offer free shipping. And for the same reason, repairs are carried out only in the workshop of a service center: they can be done correctly and according to technology only in a prepared place.

Convenient schedule

If the Service works for you, and not for itself, then it is always open! absolutely. The schedule should be convenient to fit in before and after work. Good service works on weekends and holidays. We are waiting for you and working on your devices every day: 9:00 - 21:00

The reputation of professionals consists of several points

Company age and experience

Reliable and experienced service has been known for a long time.
If a company has been on the market for many years and has managed to establish itself as an expert, people turn to it, write about it, and recommend it. We know what we are talking about, since 98% of incoming devices in the service center are restored.
Other service centers trust us and refer complex cases to us.

How many masters in areas

If there are always several engineers waiting for you for each type of equipment, you can be sure:
1. there will be no queue (or it will be minimal) - your device will be taken care of right away.
2. you give to Macbook repair an expert in the field of Mac repairs. He knows all the secrets of these devices

Technical literacy

If you ask a question, a specialist should answer it as accurately as possible.
So that you can imagine what exactly you need.
They will try to solve the problem. In most cases, from the description you can understand what happened and how to fix the problem.

What to do if it doesn't work

proximity sensor

Latest Articles

Replacing the Home button on iPad. abstract with photo

Replacing the Home button on iPad. abstract with photo What remains for our model client to do? Apple iPad They differ not only in their high-quality screen, but also in very good hardware mechanisms. However, after some time, users still

iPhone X won't unlock - Solution

iPhone X won't unlock – Solution With release new iPhone X users now have the opportunity to work with the latest technology quick unlocking – Face ID. Now it's easy to position

How to hide the dock on iPhone? No jailbreak method

How to hide the dock on iPhone? Method without jailbreak The Dock panel is a software feature in iOS that allows you to dock frequently used applications at the bottom of the screen.

Annotation on how to independently replace the battery on an iPhone 6 Changing the battery is a routine procedure that is done by anyone who owns a modern device. iPhone six battery replacement

Replacing the case on iPhone 6

Replacing the iPhone 6 case yourself Hardly any iPhone owner has ever thought about changing the case on their own device. If you have gained the courage in practice and decided to do it yourself, I will help you

Replacing the monitor on iPhone 6

Replacing the iPhone 6 monitor Before performing an iPhone six repair to replace the monitor, always turn off the power one hundred percent. You need to press the well-known button until the power indicator slider appears

How to disassemble iPhone 5s

How to disassemble an iPhone 5s on your own Apple announced the release of the newest iPhone 5s model on September tenth, two thousand and thirteen. Disassembly

iphone

5s is identical to previous models, it requires a hole

What to do if the proximity sensor on your iPhone doesn't work?

Proximity sensor

in iPhone - this is one of the main parts of the phone. It is needed for:

adjusting the monitor backlight during discussions;
to dial a number;
to enable the Siri voice service;

Accordingly, users have no basis for using our client, the functions listed above remain, if not

the sensor is working

proximity on iPhone. The constantly backlit screen during a call is a particular inconvenience. Due to the non-working sensor, buttons and icons are pressed, which of course interrupt the call.

IPhone six proximity sensor does not work/Repair is easy!

A simple method to make sure it's working properly proximity sensor on a mobile phone.

How

check

proximity sensor on phone

How check proximity sensor on iPhone.Substitution proximity sensor on iPhone 6s.The screen on the iPhone goes blank.

Causes of malfunction

Read also

The car is said to be in the best racing scene. In 2018, Ford announced that it had found the original 1968 Highland Green Mustang from the movie Bullitt, and the internet went crazy. For this reason, it was clear that the machine brought an ear...

Install YouTube on a lg smart tv When I first logged into Smart TV on an LG TV, I didn’t immediately figure out how to install additional programs and games there. How to install YouTube on Samsung smart TV. Sell, there is an option to figure out what...

How to delete an MI account from a Xiaomi phone MI account is a distinctive feature of Xiaomi production and is not gaining great popularity today. Registration, you, takes less than a couple of minutes, the same is true for deleting an account. Why not...

According to the company, Oppo Reno2 is not a successor to the existing Oppo Reno smartphone. It retains the same design and style pop-up selfie camera shark fin. Reno2F and Reno2Z, on the other hand, are toned down variants...

A non-working sensor may be a consequence of:

mechanical damage (due to a fall or impact of the iPhone);
train wear;
Excessive amounts of dust getting on the sensor;
moisture getting into the phone case. Then you should disassemble the phone and dry it; our client is left with the display components separately;
Problems after firmware update.

You need to pay attention! Sometimes the inactivity of the sensor may occur due to the cover that covers it. A poor-quality protective glass may also interfere with the proximity sensor's operation.

Firmware rollback

Often a problem with the sensor appears after installing updates. Developers don’t often have time to fix things, leaving our client with bugs. If you don’t want to wait for a new firmware version with a solution, you can roll back the OS to the previous version. Follow the instructions to return to the previous OS version:

connect your device to your PC and open the iTunes application;

Hold down the Shift key on your personal computer and click on “Restore iPhone”. In the OS X operating system, you need to hold down the Alt button;

Select the most recent backup. Wait until the components are installed. It will take less than forty minutes.

The sensor stopped working after replacing the display - solution

If you change the iPhone screen and after a while the proximity sensor stops working, this means that the position of its frame has been violated. As a natural result, the sensor is unable to perform its function. You can correct the position of the element yourself. Disassemble the phone (use only tools designed for iPhone - picks, pentagonal screwdriver, suction cup, Phillips screwdriver, spudger). Unfasten the back cover of the device, first disconnecting what remains for our client to do is the mb cables.

Find the proximity sensor holder:

Remove the sensor frame and reinstall it. Remember, the element must be located exactly in the frame of the case.

A correctly installed frame is shown in the figure:

Replacing a cable in an iPhone

Thanks to the instructions described below, you can replace a non-working sensor yourself. Before purchasing a new cable, carefully examine its markings. The original product contains digital and symbolic codes, QR codes and company inscriptions with the corresponding symbols. A genuine cable for iPhone consists of the following.

Why doesn't the proximity sensor work on iPhone (4, 5, 6, 7, 8, X and SE), what should I do?

I assume you have heard about the proximity sensor and know why it is needed. However, for those who do not know what we are talking about, we will very quickly tell you what it is. The contactless sensor was first introduced in 2007. Its main task is to detect objects brought close to the screen.

For what? It blocks accidental and involuntary presses, for example, when making a call, holding the phone to your ear, you will not be able to take out a loan, sell a car or call the Ministry of Emergency Situations. Don't you think this is a useful function? In addition, during long calls it helps to save battery by putting the screen into sleep mode. So why doesn't the proximity sensor work on iPhone 5, 6, 7, 8, X?

Determining the cause of a malfunction without preliminary testing is quite problematic. After all, the problem may be a malfunction software or physical damage. We will list the most common causes of the malfunction.

Malfunction of the replaced one iPhone screen– as a rule, this problem occurs when the screen is broken and replaced incorrectly. Let's imagine a situation: you dropped your iPhone, it was without protective glass and its screen was very cracked. You have a desire to replace it, but after learning how much it costs to replace it at Apple and how long it will take, you give up this idea and decide to replace it yourself.

And here, you may encounter two problems that you most likely won’t even know about. First, you can buy a cheap, low-quality screen that doesn't support half the functionality of the original iPhone screen. And second, you may not connect it correctly.

Physical damage is a fairly common problem. Try to remember how long ago the proximity sensor stopped working, whether you dropped your iPhone at that time or exposed it to moisture. If yes, then most likely this is the reason. The only way out of this situation is repair from Apple.

checking iphone proximity sensor

Buying a broken smartphone – Apple is one of the largest companies in the world, with a huge number of customers and it becomes a responsibility to produce a quality product. However, this does not mean the absence of marriage. In any production, people are responsible for quality control, and they tend to make mistakes. If you receive a defective iPhone, contact an Apple service center as soon as possible.

Software malfunction - sometimes the problem may be a bug iOS update or incorrect installation of any application. Solving this problem is quite easy, but you risk losing all the files on your smartphone.

How to fix proximity sensor problems on iPhone?

Remove the case and protective glass

This is perhaps the simplest, but often not very effective method. However, try removing the case and screen protector of your smartphone and test if the problem persists.

Reboot your smartphone

As absurd as it may sound, simply rebooting the iPhone helps eliminate half of the problems. In order to restart your iPhone, you need to:

Hold the power button for a few seconds until the “Power Off” slider appears.
Move the slider to the right and wait 2-3 minutes.
Press the power button until the Apple logo appears on the screen.

Hard Reset

iOS update

Update operating system can fix many problems. including the iPhone's proximity sensor not working. With each new update, previous bugs are fixed and performance improves. Sometimes the design is updated and new features are added. In order to update iOS, you need:

Reset

If none of the above methods work, you can reset all settings on your iPhone. This usually fixes iPhone 5, 6, 7 proximity sensor glitches.

In order to do this, you need:

Open "Settings".
Tap "Basic".
Select the “Reset” → “Reset all settings” function. After entering the password, click "Reset all settings" to complete the process.

Reset all data and settings

This method will not only erase all settings, but also all data, including apps, photos, videos, etc. Before you begin, create backup copy data. In order to make a reset, you need:

Open "Settings".
Tap "Basic".
Select the “Reset” → “Reset content and settings” function. Enter your password and then confirm your actions.

iPhone recovery

iPhone proximity sensor not working after update? You may be wondering what the difference is between this and the previous step. After all, both methods erase data and reset all settings. In fact, the difference is not great, but it is there. The recovery process will also format and reinstall the OS.