Beeline home digital phone on an Android smartphone. Guide to the cloud PBX service Updating the firmware version of the DECT base station
Recently, Beeline appeared for home Internet subscribers new service— Home digital phone. All users are offered a local city phone number, favorable rates and no monthly subscription fee.
You can make and receive calls on your computer using special program(X-Lite), on a VoIP phone, as well as on android device(since version 4.0). In this article we will figure out how to set up the service on smartphones with earlier android versions(including the popular 2.3).
For this we need free application CSipSimple. Download the application to your smartphone and then launch it. A page for creating an account will immediately open. Click on the button " Add account«.
You will be asked to select one of the presets. Since there is no Beeline digital phone in the list, we select extended ( Expert) list of parameters in the section " Settings Wizard«.
- Account name- any
- Account ID- enter
- URI registration- enter sip:sip.beeline.ru
- Realm (authentication domain)- enter * (star)
- Username- enter phone [email protected](country code, city code, telephone number). For example, 78121234567
- Password- enter your password
- Transport- choose UDP
- Default uri scheme- choose sip
- Allow overwriting- uncheck the box
- Proxy URI- enter:
sip:spb.sip.beeline.ru— for residents of St. Petersburg
sip:msk.sip.beeline.ru— for residents of Moscow
sip:krs.sip.beeline.ru— for residents of Krasnoyarsk
sip:ufa.sip.beeline.ru— for residents of Ufa
sip:ekt.sip.beeline.ru— for residents of Yekaterinburg
There is no need to change any other settings! When the required fields are filled in, we save the account.
If everything is filled out correctly, the account will be registered online without errors. And you can make and receive calls.
Please note that you cannot be online from multiple devices! For example, if you are logged in via an account on your computer, an error will appear on your smartphone.
Instructions for setting up the PANASONIC KX-TGP500 phone to work with the Beeline Home Digital Phone service Home digital phone 1 1. Connecting the phone to the network The KX-TGP500 phone combines all the advantages of calls using HD VoIP, classic phone functions, such as translation call, conference collection, etc., and an easy way of administration through a convenient Web interface. The KX-TGP500 phone package includes a base unit and a KXTPA50 DECT handset. Features and Specifications: Elegant design and large LCD display (2.1 inches) of the cordless handset with white backlight; High-quality, clear sound without distortion, noise and interference due to HDSP (High Definition Sound Performance) technology; Freedom of communication thanks to DECT technology; Supports up to eight accounts SIP records; Supports 3 simultaneous online conversations; Low power consumption in standby mode; Possibility of connecting up to 6 KX-TPA50 DECT handsets to one base station; Ease of administration via the Web interface; Supported codecs: G.722 / G.711 u-law / G.711 A-law / G.726 (32k) / G.729A; Notebook for 100 records; Possibility of wall mounting. Home digital phone 2 The phone cannot work independently with the network " Home Internet Beeline." Therefore, it can only be connected through a router, recommended models of which can be found on the website http://help.internet.beeline.ru/internet/equipment Connecting the phone is shown in the picture. The cable included with the phone is plugged into the Ethernet port of the base station and into any “LAN” port of your home router (in the picture this cable has yellow). The hardware installation is completed, after turning on the power cord, the base station boots up for a while (30-60 seconds) and the orange indicator on its front panel lights up, which indicates the connection with your home router has been established. For further setup, it is necessary that the computer from which you configure the phone is connected to your home router. Home digital phone 3 2. Entering the phone adapter settings By default, the phone adapter expects an IP address from the home router via DHCP. Enter the “IP Service” menu of your phone. Next, enter the “Network Setting” section. In the “DHCP” menu, see if the DHCP protocol is enabled (On), and if so, go to the “IP address” section in order to find out which address is allocated to the phone. The pictures show the corresponding sections of the PANASONIC DECT handset. For example, the Internet router allocated the address 192.168.1.149 to this phone: Next, you need to enable the internal Web server in the phone in the DECT handset IP Service | Network Setting | EmbeddedWeb. Without this, you will not be able to set up your phone: Home digital phone 4 Now you can log into the phone at the dedicated address using an Internet browser. By default, the phone has a login of admin and a password of adminpass. In the Basic Network Settings section you will see everything network settings, which the phone received from your Internet router. For static IP addressing, the appropriate addresses are entered on this screen: Home digital phone 5 3. Setting a password In the System | Administrator Password You can, if desired, change your default password to your own. Home digital phone 6 4. Phone settings To further configure the phone, go to the VoIP section and select SIP Settings | Line 1. On this screen you need to configure the server addresses - sip.beeline.ru and msk.sip.beeline.ru (for Moscow), and enter the credentials that you received when connecting to the service in Personal account“Beeline Home Internet” - your city number, your nickname and your password. In the Authentication ID field, enter your city number (necessarily indicating the domain @sip.beeline.ru) In the Phone Number field, enter your city number. In the Line ID field, enter your nickname. It is through it that you can make free calls over the Beeline Home Internet network. The password is entered in the Password field. For other cities, you must enter other proxy server addresses: krs.sip.beeline.ru - Krasnoyarsk ufa.sip.beeline.ru - Ufa Home digital phone 7 ekb.sip.beeline.ru - Yekaterinburg spb.sip .beeline.ru - St. Petersburg Next you need to go to left menu VoIP Settings | Line 1. On this setup page you need to check the voice codec settings (CODEC Settings). Please make sure that your preferred codec (First CODEC) is PCMA, and your second codec (Second CODEC) is PCMU. Home digital phone 8 After making these settings, you need to save them in the phone: When saving the settings to the telephone server (Complete): Home digital phone will notify you that registration was successful 9 After that, you can go to the Status page and see the current status devices. The picture shows a phone with one activated connected number: The setup is complete and you can use the phone. Home digital phone 10
Panasonic is known around the world for its reliable and durable telephone and fax products. Therefore, it is not surprising that many are worried about the question: “how to set up a Panasonic radiotelephone?”
Therefore, we will try to briefly outline the most important functions necessary for the conversation.
Connecting a Panasonic radiotelephone
There is a huge variety of telephone equipment from this company on sale, but all of it can be divided into certain categories, differing in the number of handsets, additional features and other things. But in any case, all radiotelephones have the same operating principle, therefore, they are connected in the same way. Therefore, below we will tell you how to connect a Panasonic radiotelephone. The first step is to remove the device from the packaging and place it in the required location. The kit will include:- adapter for connecting power to the base;
- telephone cord with RJ type plugs;
- a tube;
- set of AAA Ni-MH batteries.
Connecting the base
The first step is to connect the adapter to the network and to the base. For the first start, switch the power switch to the On position on both devices. To search for a handset, press its call button with the corresponding icon. On Panasonic devices it is located on the front panel of the base.Setting up a Panasonic radiotelephone
Now let's figure out how to set up a Panasonic radiotelephone. The principle of setting up phones from this brand is the same and is done using push-button dialing in accordance with the instructions. You can download it on the official website of the company itself.For the first start after physically connecting the telephone, you must register the handset. To do this you need to follow these steps:
- On the handset, after turning it on, you must press the “Menu” button.
- Use the arrows to select “Handset Settings” and press “OK”.
- Next, you need to select the “Handset registration” menu and press “OK”.
- On the base unit, you must press the handset call button. It has a corresponding design and, as a rule, is located in the most visible place. It can also be used when the handset has been lost to find it. Only in this case there is no need to hold the button. To register the handset, you must press the button and hold it for 5 seconds.
At this time, the message “Base PIN” will appear on the handset. Accordingly, we introduce it. The default is “0000” and confirm the entry by pressing the “OK” button. After successful setup, the antenna indicator on the handset stops blinking and starts to stay lit.
If for some reason the handset is not registered, you must remove the previously attached handset and repeat the process again.
To do this you need:
- click the “OK” button;
- go to the database settings and confirm the selection “OK”;
- In the current window, enter the code “335” and when you click on the “OK” button, you will be taken to the menu for selecting registered handsets. Use the arrows to select the one you need and click “Yes”.
When changing your PIN code, be sure to save it on a physical medium, otherwise you will have to contact a specialized service.Configure your phone settings
After the initial startup and registration of the handset, the phone must be configured for comfortable operation. These settings include selecting the menu language, setting the date and time. You can also select the dialing mode if necessary. The pulse mode is installed from the manufacturer's factory, which corresponds to modern telephone lines.Selecting menu language
Setting the date and time
To select a language, click on the “OK” button in the menu and find the “Menu language” sub-item. We confirm the choice with the “OK” button and get to the list of all supported languages. In it, use the up and down arrows to find the required one and again press the menu selection button. On some phones, you must press the end call button to confirm the action and exit the menu.
These settings have been tested for Panasonic KX-TGP500 using KX-TPA50 handsets and firmware version 22:58 . note that different versions firmware may have different web interfaces and/or different functionality. This manual is for a new phone or for a device that has been reset to factory settings. If you're sleepy, return your phone to factory settings.
KX-TGP500 supports up to 8 SIP accounts, 6 DECT phones and up to 3 simultaneous calls. This instruction also applies to setting up KX-TGP600, who came as a replacement.
Additionally: To ensure the basic parameters of the DECT base, you must create at least one new extension number and use the provided KX-TGP500 templates. Since many DECT phones are used in combination with a desk phone, the two phones must use the same extension number (using SIP Forked ID). In this case, you need to create a fictitious extension number, and configure new phone DECT. After preparing the phone with the details of the new number, you can remove the fictitious number from 3CX Phone and set up SIP account 1 with the details of the existing number.
This guide covers all the necessary steps. For successful configuration, all steps must be completed:
1) Register the first phone with a DECT base
2) Login to the web interface of the DECT base station
3) Update the firmware version of the DECT base station
4) Configure the information provided in 3CX Phone System for the new phone
5) Automatically transfer system settings to Panasonic DECT
6) Setting up additional DECT participants (including a second desk phone)
1. Registration of the first phone with DECT base
- Connect the DECT base station to power and to the network.
- Start the DECT base station. At this stage, it will try to obtain an IP via DHCP.
- The LED on the front panel will blink when it is ready.
- On the first handset, press the joystick to enter the main menu.
- Set “Initial Settings” and go to the “Registration” section.
- Select “Register H.set”.
- At the base station, press the “Connection” button and hold it for 4 seconds, the LED on the base starts blinking red.
- On the handset, press the “OK” button and enter “0000” when prompted for a PIN code.
- If pairing is successful, the indicator will flash orange and “Handset 1” will appear on the phone display.
2. Login to the web interface of the DECT base station
- On the handset, press the joystick to enter the main menu and select “IP-Service”> Network Settings> IP Settings. Please note the IP address of the DECT base station.
- From the main screen, press the joystick to enter the main menu and select “IP-Service”>Network Settings again. Open “Embedded WEB” and change the setting to On. (ON)
- Using a web browser, go to the DECT base station web interface using the IP address found in step 1.
- The default username and password for the DECT base station are "admin" and "adminpass" respectively.
3. Updating the firmware version of the DECT base station
- Before use new system DECT, you must update the firmware manually.
- Open the DECT base station web interface > Maintenance > Local Firmware Update
- The firmware can also be found on the website: http://panasonic.net/pcc/support/sipphone/download/TGP/eu.html.
- Once the firmware update is complete, the new DECT base station will boot.
- Using the handset, you need to activate "Embedded WEB" as shown in step 2.
4. Configuring the information provided in 3CX Phone System for a new phone
- In the 3CX Management Console > Extensions, select “Add Extension”.
- Set up your number details on the General tab.
- Go to the phone provisioning tab.
- Enter the phone's 12-character MAC address. This information can be found in the DECT base station web interface under the Status tab > Network Status.
- From the drop-down list, select the model "Panasonic KT-TGP500"
- Click OK to create configuration file. The file is created in a directory on the web server and will be sent to the phone when it starts.
5. Automatic transfer of system settings to Panasonic DECT
- In the web interface of the DECT base station, select: “Maintenance> Provisioning Maintenance> Standard File URL” and change the settings as follows:
- Enter the URL http://IPofPBX:5000/provisioning/Config (MAC). Cfg. Replace IPofPBX with the 3CX Phone System IP address.
- Click save when you're ready.
- Wait until the indicator on the DECT base station changes color to green.
- This is the first SIP account associated with handset 1 and is ready for incoming and outgoing calls
6. Setting up additional DECT participants (including a second desk phone)
Until now, you have been setting up your first phone. If you need to connect additional handsets, then you need to configure SIP information for new accounts manually. All settings except extension number, extension ID and password for all SIP accounts are already configured when you set up the first extension. The mapping between the extension number and the handset number can be configured in the settings: "Base> Telephone> Multi-number". Here you can configure settings for incoming and outgoing calls.
For creating more internal accounts in the DECT system, you need:
1) Setting up a new number in 3CX Phone System. You do not need to configure settings in the "Phone Provisioning" tab.
2) Use settings from an existing number.
Then switch to Telephone>Call Control>Line 2 and fill in the display name and extension number.
Repeat this process for each additional DECT internal.
Flaws
- Can't download phone book 3CX
- Calls from queues and groups will leave missed call notifications (regardless of whether the agent picked up or not)
- If you use 3CX Phone for calls, the device will not play music on hold and you will not hear a tone.
