How to flash highscreen boost 2 se. By leaving a review through the comment form, you help others to learn about the pros and cons of Highscreen Boost II SE and make a purchase decision.
In this article, Rootgadget will tell you how to flash Highscreen Boost II SE fast and safe. We have written detailed instructions for you.
Why update the firmware on Android
The reasons are different for everyone, the main thing is that in the new firmware the manufacturer fixes bugs and shortcomings.
- The problem with the quality of pictures, with a good camera.
- Poor display response to pressing.
- I want to see new android Pie 9.0.
- palled old version Android, I want new features and capabilities.
- The phone does not want to turn on.
- The phone's battery has stopped charging.
- First you need to download the firmware by selecting one of the options below. Together with it in the archive, the necessary set of programs (TWRP and others).
- Next, unpack the archive and find the file "instruction_rootgadget.txt". You can unpack the archive with any archiver (7ZIP, WinRar, and others).
- lying in zip archive the firmware file must be downloaded to a memory card or smartphone memory.
- For other information and sequence of actions, see the text instructions.
Firmware Highscreen Boost II SE
- Android Pie 9.0 is a flagship OS, but still a little underdeveloped. URL: upfileget.info/android9pie
- 8.0 Oreo is a great option, minimal bugs and rich functionality, but version 9 is certainly better. URL: upfileget.info/android8oreo
- 7.0 Nougat is a stable version in all respects, it works even on low-powered hardware. URL: upfileget.info/android7nougat
- 6.0 Marshmallow - 5 and 6 versions are already a real junk, although they were once the pinnacle of progress. But if you switch to them from version 3 or 4, then of course the difference is very noticeable. URL: upfileget.info/android6
- 5.0 Lollipop URL: upfileget.info/android9pie
Root rights
If you want to get root access, you can use the universal program Rookthp Pro 2.4, Website address: rootkhp.pro. Instructions for using the program can be found. And also from universal we can advise ZYKUroot version 2.2. You can find information about it at zykuroot.info
About more popular programs and we won’t talk, the same Kingo and Framaroot are always well-known, although they are losing ground a little
Of course, I read a lot of reviews about Highscreen Boost. But, as they say, until you try it yourself ... - that's how I was taught. Although I was taught like this: - only fools learn from their mistakes! And I was also taught not to buy cheap things (.. I'm not rich enough to buy cheap ones ...) ... Time goes by, and the Chinese IT industry is moving forward, and it is moving by leaps and bounds ... And now China is already ahead of the rest .., but oh what am I?
Highscreen Boost is a Chinese smartphone on Android 4.1.2.
Battery 4200mA. (... If Skype is on, 4-5 days is enough. Otherwise, a week is confident. But I don’t talk much - 10 minutes a day, maximum ...).
... My device lived in light mode for almost 9 days ...
Combat software for Highscreen Boost - OS: Android 4.1.2
The set of software, initially, is minimal.
Kernel version - 3.4.0
The build number is V2.2 (how to flash (http://highscreen.org/products/communicators/highscreen-boost/) at the bottom of the tech info page.).
Communication module firmware - V2.0 (holds the network better than V2.2)
From my own experience:
Firmware V2.0, immediately flashed from the support site V2.2. (periodically lost the network, infrequently.), read w3bsit3-dns.com. I decided to change the RM (radio module) to v2.0 I flashed the radio module. The network no longer loses.
An experience:
copy Boot_2.0.zip (http://4pda.ru/forum/index.php?showtopic=463222&st=140#entry22871436) to the root of the memory card. Reboot phone to recovery*. Select the latest “advance” item - go into it (upper right book). select the line "enable signature verification", activate it with the right button. the line will change to "disable signature verification", go back to the recovery menu and select the "apply update from external storage" item, point to the Boot_2.0.zip file. If everything is done correctly, then an inscription should appear, I did not have it - update complete. Select recovery reboot again.
Works on one charge:
As a phone - 5-6 days, if only to call and answer.
As a smartphone, with an average load - 3-3.5 days.
With a heavy load - 2 days (Wi-Fi, Browser, ICQ, Skype, VPN, Lan, RDP ...).
In the car, like a navigator, with active GPS - 8 hours!
After flashing:
Kernel version - 3.4.0
Build number - V2.2
The firmware of the communication module is V2.0 (the network holds better than V2.2).
Software - which an IT specialist should have:
install-su-cwr.zip - root, install through ANY recovery and on ANY firmware. (http://4pda.ru/forum/index.php?showtopic=434918&st=2240#entry21764093) SuperSU_PRO+v1.32.apk Adobe+Reader+10.6.0.apk Adobe_Flash_Player_11.1.115.17.apk
AK_Notepad_2.4.5.apk - A program for creating notes with reminders.
AndFTP+Pro+3.0.apk
BusyBox+Pro+v9.7.3.apk
com.android.aldiko_2.2.3.apk
Dolphin+Browser+v9.4.2.apk
ES_File_Explorer_3.0.4.apk
hackerskeyboard-v1034-mod6.7.apk - great keyboard
Lucky Patcher+3.3.4.apk
Office Suite+Pro+7+(PDF+&+HD)+v7.1.1237.apk
PocketCloud.Remote.Desktop.Pro.v1.3.216.apk
QuickPic_2.9.4.apk - replacement for the standard gallery
Remote_RDP_3.6.4.apk
Remote_VNC_Pro_2.0.apk
CIDRCalculator_1.9.apk
in.introkun.setmacaddress_v2.0.1.apk
Root+Explorer+(File+Manager)+v3.01.apk
Root Explorer 2.21.1.apk
Total Commander 2.02b3.apk
FTP Plugin (File Transfer) 2.02.apk
LAN plugin (General Windows access) 2.01.apk
Plugin TotalBox (Dropbox) 0.1.34b.apk
Plugin USBStick (USB drives) 1.0.2.apk
WebDAV plugin (WEB folders) 2.03.apk
com.bmsrecord.apk - record conversations from the line. (In order to write - click on the icon ..., in short, the icon should be red)
Skype_3.2.0.6673_v19_eng_by_ms.apk
Taskiller_Full_v3.5_Rus_allexx71.apk
TeamViewer-udalyonnyj_dostup_8.0.1055.apk
WhatsApp_2.10.222.apk
Wifi_Analyzer__3.6.apk Wifi_Connecter_Library_2.0.1.apk
xScope_Browser_Pro-Web_File_v7.27_RUS.apk
WeatherPro + v2.3.apk - weather + widget on ch. screen
Tiny_Compass_v1.2.1.apk
WAFA-B-2.0.1147-prodc.apk
xlive_2.1.3_mod_icq_status.apk
VPlayer+Video+Player+v3.1.8+FULL+.apk
Luks Manager - encryption - Mounts an encrypted file as a folder
Notepad+ from the market
terminal emulator.
Games:
250++Solitaire+Collection_2.2.0.apk
preferans.apk
Preferans_v1_2_6.apk
Angry_Birds__1.6.1.apk
Angry_Birds__3.1.2.apk
ChessBuddy_1.02.apk
GPS: Navitel_full_7.5.0.0_RePack
*How to login Recovery menu? With the device turned off, simultaneously hold down the VOLUME_UP + POWER keys. Navigation with volume keys, selection with the on button.
* The radio does not want to tune in to a flat frequency - 107.0. In the settings, set the region of Russia.
Instructions for flashing a Highscreen Boost 2 smartphone to a new official or custom firmware, installing custom recovery (recovery) and getting root superuser rights.
Before you start flashing your phone, you need to install drivers to connect your PC to highscreen phone Boost 2. To do this, download the archive - ADB, unpack it and install it.
Connect the switched on phone to the computer. In the phone settings, USB debugging should be enabled by default, if you turned it off, turn it on. Right-click on the "My Computer/This Computer" icon context menu select "Properties". In the window that opens, on the left we are looking for “Device Manager” - open it.
In the “Device Manager” window we see the connected device, I have it “YunOS ACB phone”, click on it 2 times to open the list, we see “YunOS ACB Interface”. You have the driver installed.
If there is a yellow triangle next to your device, then you do not have drivers installed.
In the folder where the drivers are located (by default C: / adb /) with the Shift button held down, right-click on an empty space. In the context menu, select "Open Command Window". opens command line, write adb devices
List of devices attached
………………………. device
Symbols should be used instead of dots.
Installing custom recovery on Highscreen Boost 2
Download any recovery that is suitable for the Highscreen Boost 2 smartphone
You need exactly the .img format file, for example, recovery.img. We put the downloaded file in the folder C: / adb /
We turn off the phone. We take out the battery for 10-15 seconds (not necessary, but sometimes necessary), insert it back. Press the volume down key and turn on the device and hold for 5 seconds. will appear eternal Highscreen inscription ( fastboot mode). We connect the phone through the wire to the computer.
In the folder C: / adb / with the Shift button held down, right-click on an empty space. In the context menu, select “Open command window” and in the window that opens, write fastboot devices and see the following:
Then we write fastboot flash recovery recovery.img press enter, then write fastboot boot recovery.img press enter, after which the process of flashing custom recovery on the smartphone should start.
Ready! The phone itself will boot into recovery!
Installing custom firmware using recovery
The firmware installation will go through the TeamWin Recovery Project custom recovery, and it is assumed that you installed this recovery from previous paragraph this manual.
To get started, download the firmware you like and throw it on a USB flash drive in your phone
Download firmware Highscreen Boost 2 - MIUI 4.8.8 RUS | cm-11 | Baidu_V6
We go into the recovery, with the phone turned off, press the volume up key and the phone's power button.
We make Backup (Required!), Press the “Backup” button, move the lower slider to the right and wait. We are waiting for a long time ... until the green inscription appears successful. While the recovery is running, the screen may turn off, the phone is locked.
Then we clean your smartphone from unnecessary system files, that is, we do a wipe. We go to the main screen of the recovery and press the “wipe” button, again we move the slider and again we wait a long time.
Installing the firmware. We go to the main menu of the recovery and press the Install button. We find the downloaded firmware, poke it. Again we shift the slider and jam again) At the end of the process, the inscription sucsesful and 2 restart system and wipe dalvik buttons will appear.
This page contains information about mobile device. Here you can find and download latest version android firmware on Highscreen Boost II SE, and you can also get root rights .
You can read more about root rights. Instructions for getting it are below.
In what cases it is necessary to update the firmware
- I want to install new firmware to expand the capabilities of the smartphone;
- Recovering from an unsuccessful firmware is necessary
- The device constantly reboots for no reason;
- The smartphone does not turn on.
What firmware do we have
To download the firmware Android 8.0 Oreo, 7.1 Nougat, 6.0 Marshmallow, Android 5.1 Lollipop on Highscreen Boost II SE read the full article - it's very important. By installing the latest available android version you will be surprised at the possibilities. Also you can find official version MIUI firmware different versions and custom original firmware.
By leaving a review via the comment form, you help others to learn about the pros and cons of Highscreen Boost II SE and make a purchasing decision.
Firmware available: In stock.
Download firmware
Leaving a review through the comment system, indicate a real email if you have problems installing the firmware. Please note that we provide free consultations and therefore may be delayed in responding. In addition to the administration, they can answer and help you ordinary users, just like on the forum.
Instructions for installing firmware can be found at the links below. Firmware download for Highscreen Boost II SE is available via torrent with instructions.
Firmware installation instructions
To download, select the firmware you need and click on the link.
To install, do the following:
- Download the file with firmware and special program
- Run the program on the computer
- You take desired version firmware
- Strictly follow all instructions from the archive
Video on firmware Highscreen Boost II SE
Highscreen Boost 2 SE is a Russian smartphone that runs on Android 4.3 and has a performance rating of 5 out of 5. We will tell you all the characteristics of the smartphone, as well as how to root on the highscreen and reset the settings. In addition, there is a firmware (official and custom).
Root on Highscreen Boost 2 SE
How to get a root for Highscreen Boost 2 SE see instructions below.
Below are universal programs to get root rights for devices on Qualcomm Snapdragon
- (needs a PC)
- (Root using PC)
- (popular)
- (root in one click)
If the rights of the superuser (root) could not be obtained or the program did not appear (you can install it yourself) - ask a question in the topic. You may need a custom kernel firmware.
Characteristics
- Standard: GSM 900/1800/1900, 3G
- Type: smartphone
- Operating system: Android 4.3
- Case type: classic
- Body material: plastic
- SIM card type: micro SIM
- Number of SIM cards: 2
- Multi-SIM Operation Mode: Alternate
- Weight: 203g
- Dimensions (WxHxD): 68.6x140x9.8 mm
- Screen type: color IPS, touch
- Type of touch screen: multi-touch, capacitive
- Diagonal: 5 inches.
- Image size: 720x1280
- Number of pixels per inch (PPI): 294
- Automatic screen rotation: yes
- Type of ringtones: polyphonic, MP3 ringtones
- Vibrating alert: yes
- Camera: 13 million pixels, built-in flash
- Camera Features: Autofocus
- Video recording: yes
- Front camera: yes, 2 million pixels.
- Audio: MP3, AAC, WAV, FM radio
- Dictaphone: yes
- Headphone Jack: 3.5mm
- Interfaces: Wi-Fi 802.11n, Bluetooth 3.0, USB
- Satellite navigation: GPS/GLONASS
- Internet access: WAP, GPRS, EDGE, HSDPA, HSUPA, email POP/SMTP, HTML
- Modem: yes
- Processor: Qualcomm Snapdragon 400 MSM8228, 1400 MHz
- Number of processor cores: 4
- Video processor: Adreno 305
- Built-in memory: 8 GB
- Volume random access memory: 2 GB
- Memory card support: microSD (TransFlash), up to 32 GB
- Additional SMS features: text entry with dictionary
- MMS: yes
- Battery type: Li-Ion
- Battery capacity: 6000 mAh
- Optional battery capacity: 3000 mAh
- Sensors: light, proximity
- Book search: yes
- Exchange between SIM card and internal memory: there is
- Organizer: alarm clock, calculator, task planner
- Features: 2 batteries: 3000 mAh and 6000 mAh; weight with batteries 3000 mAh - 151g, with battery 6000 mAh - 203g
Highscreen Boost 2 SE review
In fact, Highscreen Bost 2 SE is (now) the most worthy solution, not only in terms of autonomy, but also in terms of design and performance. Of course, the price / quality ratio is also respected.
You can verify this by reading the materials prepared by us on this smartphone.
Firmwares for Highscreen Boost 2 SE
Official firmware (latest, 20150320_V3.2IIse) - ()
Custom firmware CyanogenMod 13 (Android 6.0) -
Firmware Highscreen Boost 2 SE can be done in several ways. If the firmware file has not been uploaded here yet, then create a topic on the forum, in the section, experts will help you and add firmware. Do not forget to write a review of 4-10 lines about the smartphone in the subject line, this is important. The official website of Highscreen, unfortunately, will not help to solve this problem, and we will solve it for free. This Highscreen model has a Qualcomm Snapdragon 400 MSM8228, 1400 MHz on board, respectively, there are such flashing methods:
- Recovery - flashing directly on the device
- A special utility from the manufacturer, or
What are custom firmware(firmware)?
- CM - CyanogenMod
- lineageOS
- paranoid android
- OmniROM
- Temasek's
- AICP (Android Ice Cold Project)
- RR (Resurrection Remix)
- MK(MoKee)
- flymeOS
- Bliss
- crDroid
- Illusion ROMS
- Pacman ROM
Problems and disadvantages of a smartphone from Highscreen and how to fix them?
- If Boost 2 SE does not turn on, for example, see White screen, hangs on the screen saver, or the notification indicator only blinks at all (possibly after charging).
- If it freezes when updating / freezes when turned on (requires flashing, 100%)
- Not charging (usually, hardware problems)
- Can't see sim card
- The camera does not work (for the most part, hardware problems)
- Sensor not working (depending on the situation)
Reset settings on Highscreen Boost 2 SE can be done in a very simple way:
- Settings->Backup & Reset
- Reset settings (at the very bottom)
How to reset pattern
How to reset graphic key if you forgot it and now you can't unlock your Smartphone. On the Boost 2 SE model, the key or PIN can be removed in several ways. You can also remove the lock by resetting the settings, the lock code will be deleted and disabled.
- Reset graph. blocking -
- Password reset -
