How to unlock a laptop if you forgot your password? Simple methods, instructions and recommendations. How to remove or reset a password on a computer or laptop How to disable the password request when turning on a laptop
Hi all! I accidentally found a way to reset the BIOS password on a laptop without disassembling it. It's very convenient!
How to remove the BIOS password on a laptop?
All BIOS settings information is stored in a chip on the motherboard, and the battery on the board serves to store the information of this chip when the laptop is turned off or the battery is dead. And to reset this information, you need to disassemble it and remove the battery or unsolder it where it is soldered. Isn't it really inconvenient?
BIOS password generator
Therefore, I propose another method, without disassembly. I found special program and I translated it into Russian for you to make it easier to use. and we see the field in which you need to enter your code.
You can recover the password from laptops: Acer, Compaq, Dell, Fujitsu-Siemens, HP, Compaq, Insyde H20, Phoenix, Sony Vaio, Samsung. I'm not sure it will work on Asus, but try it.
Procedure
- We turn on the laptop and try to enter the BIOS, usually the F2 key.
A message appears, enter your password.
Enter any character set and press enter. The Invalid Password sign will appear.
We dial 2 more times random numbers and the BIOS will prompt you to enter a password to unlock or continue booting the system.
We choose to enter the unlock password (Enter Unlock Password).
A password will appear that you need to enter in.
In the service, enter this code and click get password.
Depending on your laptop brand, enter the received code in the field provided.
And press Enter. And we get into the BIOS.
Now go to the Security tab and remove the password. Press enter next to the set supervisor Password field and enter the password that we generated in the service, and in the second and third fields we do not write anything, just press enter.
And now we do the same thing in the Set HDD Password field, remove the password for loading the hard drive.
That's it, the password on the laptop has been removed from the BIOS.
Almost always our electronic devices are password protected. Often we do this just in case, just in case. After all, why do this if your PC or laptop is used only at home, with loved ones, or in the office, when no one has access to it? Let's say you decide not to burden yourself with remembering complex combinations of symbols and numbers. The question arises: when turned on? First, we take the code from the administration and the password reset disk.
What is the administrator password and how to remove it
When you turn on your computer or laptop for the first time, each user is asked to come up with and enter security code. We do this and write it down somewhere so that next time we can log into our device. This combination is the administrator code. Now let's look at how to remove the password. To do this, we launch the operating system and find ourselves in it as an administrator. We go along the following path: “Start”, “Control Panel”, “User Accounts”. Click on the last logo and in front of us is the administrator account. To the left of the image is the “Delete your password” tab. You'll have to enter it again. And that's it, it's done.
Removing user account passwords and user accounts themselves
To clear the codes of other accounts, click on “Manage another account”. Then we find the one we need in their list and do as in the previous case: to the left of the image there is the inscription “Deleting your password”. Click on it and enter the code from this account, not the administrator. It is done. So we figured out how to remove the password from your computer when you turn it on. If you have many accounts and you do not want to write various combinations when turning on the device, evaluate the need for these entries and delete all unnecessary ones. To do this, after “User Accounts”, go to “Manage Account” and click on the desired one, and then on “Delete Account”. After which the system will ask whether this user’s files need to be saved on the computer. If not, delete them; if you need them, then select the “Saving Files” tab. To complete the operation, you must confirm it. There is also a standard account called “Guest”. It is not recommended to remove it, but you can enable it or disable it completely. When disabled, only the administrator profile will remain and, of course, the question of how to remove the password from the computer when turning it on will disappear. In the case when you have removed it, the device will always be turned on without additional manipulations.
Creating a password reset disk
It also happens that you forgot your password. To prevent this from becoming a big problem, users create a password reset disk. Using it, you can easily reset and log in. How to do it? Simple enough. You need a flash drive with a minimum free space, the information on it will not interfere or be damaged. Consider the following factors: the disk must be made for all accounts; if you create several flash drives, only the last one will work; when changing the password new disk There is no need to create, the old one will function. Now about the process itself. In “Start”, click on your photo account and insert external memory into the device. Select the item “Create a password reset disk”, a new window will open, click “Next”. Select your flash drive, enter your account code and click “Next”. The process itself will begin, during which you will need to click “Next” again, and then “Finish”. All! The userkey.psw file appeared, which is responsible for the reset operation.
How to remove the password from your computer when you turn it on using a reset disk
Something you have been afraid of for a long time has happened. When you turn on the computer, you need to enter a code, but it is lost and the memory is empty. What to do? And then you remember that not long ago you secured yourself by creating a flash drive with a reset password. Find it and try to log in without entering the code. A button appears that says “Reset Password.” Click on it and insert the saving flash drive. Would you like to have New Password To log in, enter it twice and the prompt; if you don’t want to, just click “Next.” That's it, the code is reset. In fact, it is recommended to have a password when you turn on your computer. So keep it well or memorize it.
Almost always our electronic devices are password protected. Often we do this just in case, just in case. After all, why do this if your PC or laptop is used only at home, with loved ones, or in the office, when no one has access to it? Let's say you decide not to burden yourself with remembering complex combinations of symbols and numbers. The question arises: how to remove the password from the computer when turning it on? First, we take the code from the administration and the password reset disk.
What is the administrator password and how to remove it
When you turn on your computer or laptop for the first time, each user is asked to come up with and enter a security code. We do this and write it down somewhere so that next time we can log into our device. This combination is the administrator code. Now let's look at how to remove the password. To do this, we launch the operating system and find ourselves in it as an administrator. We go along the following path: “Start”, “Control Panel”, “User Accounts”. Click on the last logo and in front of us is the administrator account. To the left of the image is the “Delete your password” tab. You'll have to enter it again. And that's it, it's done.
Removing user account passwords and user accounts themselves
To clear the codes of other accounts, click on “Manage another account”. Then we find the one we need in their list and do as in the previous case: to the left of the image there is the inscription “Deleting your password”. Click on it and enter the code from this account, not the administrator. It is done. So we figured out how to remove the password from your computer when you turn it on. If you have many accounts and you do not want to write various combinations when turning on the device, evaluate the need for these entries and delete all unnecessary ones. To do this, after “User Accounts”, go to “Manage Account” and click on the desired one, and then on “Delete Account”. After which the system will ask whether this user’s files need to be saved on the computer. If not, delete them; if you need them, then select the “Saving Files” tab. To complete the operation, you must confirm it. There is also a standard account called “Guest”. It is not recommended to remove it, but you can enable it or disable it completely. When disabled, only the administrator profile will remain and, of course, the question of how to remove the password from the computer when turning it on will disappear. In the case when you have removed it, the device will always be turned on without additional manipulations. 
Creating a password reset disk
It also happens that you forgot your password. To prevent this from becoming a big problem, users create a password reset disk. Using it, you can easily reset and log in. How to do it? Simple enough. You need a flash drive with a minimum of free space; the information on it will not interfere or be damaged. Consider the following factors: the disk must be made for all accounts; if you create several flash drives, only the last one will work; When changing the password, there is no need to create a new disk; the old one will function. Now about the process itself. In “Start”, click on the photo of your account and insert the external memory into the device. Select “Create a password reset disk”, a new window will open, click “Next”. Select your flash drive, enter your account code and click “Next”. The process itself will begin, during which you will need to click “Next” again, and then “Finish”. All! In external memory a userkey.psw file appeared, which is responsible for the reset operation. 
How to remove the password from your computer when you turn it on using a reset disk
Something you have been afraid of for a long time has happened. When you turn on the computer, you need to enter a code, but it is lost and the memory is empty. What to do? And then you remember that not long ago you secured yourself by creating a flash drive with a reset password. Find it and try to log in without entering the code. A button appears that says “Reset Password.” Click on it and insert the saving flash drive. If you want to have a new password to log into the system, enter it twice and a hint; if you don’t want it, just click “Next.” That's it, the code is reset. In fact, it is recommended to have a password when you turn on your computer. So keep it well or memorize it.
fb.ru
How to remove a password from a computer on Windows 8
Many users are interested in how to remove the password from a computer or laptop on Windows 8. In fact, it is not at all difficult, especially if you remember the login combination. But there are times when a user simply forgot the password for his account and cannot log in. So what should we do? Even from such seemingly difficult situations there is a way out, which we will talk about in our article.
See also: How to set a password in Windows 8
Remove password if you remember it
If you remember your password to log into your account, then you should not have any problems resetting your password. In this case, there are several options for how to disable the password request when logging into a user account on a laptop; at the same time, we’ll look at how to remove the password for a Microsoft user.
Reset local password
Method 1: Disable password entry in “Settings”
Ready! Now you won't have to enter anything every time you log in.
Method 2: Reset your password using the Run window
Thus, we did not remove the password, but simply set up automatic login. That is, every time you log in, your account information will be requested, but it will be entered automatically and you won’t even notice it.
Disable your Microsoft account
Ready! Now re-login using your new account and you will no longer need to enter your password and log into your Microsoft account.
Reset your password if you have forgotten it
If the user has forgotten the password, then everything becomes more difficult. And if in the case when you used a Microsoft account when logging in, everything is not so bad, then many users may have difficulties resetting their local account password.
Reset local password
Main problem this method is that this is the only solution to the problem and for it you need to have bootable USB flash drive your operating system, and in our case, Windows 8. And if you do have it, then that’s great and you can start restoring access to the system.
Attention! This method is not recommended by Microsoft, so you do everything you do at your own risk. You will also lose all personal information that was stored on the computer. Essentially, we will simply roll back the system to its original state
You can now log in to your new user account using your new password. Of course, this method is not easy, but users who have already encountered the console before should not have any problems.
Microsoft password reset
Attention! For this method of solving the problem it is necessary additional device, from which you could access the Microsoft website.
Now, using the combination you just created, you can sign in to your Microsoft account on your computer.
We looked at 5 different ways how to remove or reset the password in Windows 8 and 8.1. Now, if you have problems logging into your account, you will not be confused and will know what to do. Report this information to friends and acquaintances, because not many people know what to do when the user has forgotten the password or is simply tired of entering it every time when logging in.
We are glad that we were able to help you solve the problem.
Poll: did this article help you?
Not reallylumpics.ru
How to remove the BIOS password from a laptop
Users set a password on the BIOS in order to protect their computer from unauthorized access. Setting a password is not difficult, and it will provide reliable protection, but if the password is set accidentally and it is safely forgotten, then difficulties may arise with recovery. Unlike desktop PCs, passwords on laptops are stored in non-volatile memory. To get a positive result, we follow the instructions.
There may be several ways to reset the BIOS password. It all depends on the laptop manufacturer. On many budget and serial models(TOSHIBA, ASUS, ACER, HP, SAMSUNG, etc.) resetting the BIOS password is a fairly simple operation. First of all, you need to study the documentation for the laptop. Consider whether there is a jumper on its motherboard. The jumper contacts are usually labeled CMOS, which is located next to the battery.
Turn off the laptop completely, find the jumper on the board, and connect the second pair of contacts with a jumper. After 10-15 seconds, return the jumper to its place. Instead of a jumper, some models may simply have a pair of contacts. Short them for a few seconds with any metal object. After this, the BIOS settings will be reset to factory settings.
Turn on your laptop. It won't boot, but the CMOS settings are reset. A message may appear on the screen asking you to press the “F1” key, this should be done to install BIOS settings. After that, select “Save and exit”. Now the OS will continue loading without asking for a BIOS password.
If the jumper is not found or it is not provided by the motherboard manufacturer, you can use another method. Pry the CMOS battery with something sharp and remove it for a while. Sometimes 5-10 minutes are enough for the BIOS to be reset, but it is better to increase the time to several hours. This operation must be performed when complete shutdown laptop, it is better to remove the battery.
On expensive laptop models, information security techniques may be more complex and reliable. On such motherboards It is almost impossible to crack the BIOS or OS boot password. But you can try by using programmatic method reset the BIOS password. Log in to the operating system as “Administrator”. Find command line in the "Accessories" folder and enter the command "debug.exe" and press "Enter". Enter the following commands in sequence, pressing "Enter" at the end of each: "o702E", "o71FF", "q". After rebooting the laptop, a CMOS error message will appear on the screen and you will be prompted to reconfigure the BIOS. It means that BIOS settings reset and you can optionally restore the parameters or leave them unchanged.
Since all methods of resetting a BIOS password (zeroing) may not give the desired result, before you password-protect a laptop through the BIOS, you need to weigh everything carefully. There may be no reset jumpers, and removing the battery does not always help. If the password is still set and none of the described methods are suitable for your laptop model, you could not reset the password, then all that remains is to contact the service center.
To protect their data stored on a laptop, users set passwords. But sometimes such an unpleasant situation arises as the inability to remember the code that allows you to log into Windows. Don't despair. Everything can be restored quite quickly and without data loss. How to unlock a laptop will be discussed further.
Is it possible to recover my password?
If it is impossible to enter the password, some immediately begin to reinstall the operating system. But there are simpler ways. They will tell you how to unlock your laptop if you have forgotten your password. Initially, you can use the hint on the welcome screen. Sometimes this helps you remember the password yourself, without resorting to any additional actions.
If, even after reading the hint, you still cannot remember the password, you will have to move on to more radical methods. In this case, the code can be restored or hacked. All data on the hard drive will be saved.
To understand how to quickly unlock a laptop, you should learn several methods. Various sources present many ways, both useful and not so useful, on how to cope with such a problem.
What should I do to recover my password?
Having filtered out advice that could lead to a complete blocking of the laptop, you should choose the most suitable path. You should not delete SAM files, otherwise the laptop may not turn on at all. Arises system error, the laptop will require a reboot, but everything will repeat in a vicious circle. Here the usual unlocking methods will not help.
Next, you should determine the course of action on how to unlock your laptop if you forgot your password. A lost password can be recovered or hacked. In the first case, you will need to log in to the system in safe mode, and in the second, you will need to use special software.
Entering Safe Mode
To unlock a laptop that has Windows system, you need to log in. You will need to restart the laptop and wait a short time. Then press the F8 button. It is better to do this several times so as not to miss the moment when the system is ready to execute the command.
Depending on the brand of laptop, the request to enter the BIOS may be carried out using a different command. This must be clarified in the instructions for this type of equipment.
After this, a screen should load showing the available operating system startup modes. If the laptop starts loading Windows as usual, something has been done wrong. You will need to repeat the procedure.
To understand how to unlock a laptop (Windows or other operating system installed - it doesn’t matter) and not to damage the information on the hard drive, you must carefully read the instructions and follow the steps exactly. When the startup modes are highlighted in the BIOS, you will need to select “Safe Mode” using the keyboard.
The laptop will boot the system. You will need to log in as an administrator. This user has no password by default.
Changing your password in safe mode
While logged in safe mode, you will need to perform the following steps. You need to launch the “Start” button and open the “Control Panel”. Then you will need to enter the “User Accounts” menu. Here the user will find his account, the password for which was lost or forgotten.
A list of available commands will be located on the left side of the screen. All that remains is to find “Change password”. The new encoding will need to be entered 2 times. If you leave both fields blank, the password will no longer be present on this computer at all.
The technology of how to unlock a laptop if you forgot your password is almost complete at this stage. You will need to click the “Save” button and restart the laptop.
Faster method
There is another, faster approach to unlock your laptop. To do this, you will need to launch the console on the administrator account.
By simultaneously pressing the Win + R buttons, the “Run” tab is called up. A dialog box will appear, in the empty field of which you will need to enter cmd and press Enter.
A console will open for the user as an administrator. In it you need to enter net user *user_name* *new_code* and confirm the entry again. These steps will help solve the question of how to unlock a disk (laptop with Windows) without damaging the data on it. After the system restarts, login proceeds as normal.
Application of special software
To understand how to unlock a laptop if you forgot your password, you should consider another method. Sometimes the previous method cannot be performed due to the user changing certain settings. In this case, you can use a special program.
You can install it as a disk image or on different platforms. The result will be identical. It all depends on what is more convenient for the user. The image is installed on a prepared bootable USB flash drive or disk. After this, going into the BIOS, you will need to select a method to boot the system from a flash drive (disk).
When launched, the program will begin to guess the password for the laptop. The method of unlocking a laptop must be followed strictly according to these rules. There is no need to delete any files. The program will select the old code and require you to restart the laptop. This method takes more time, but it will help if you were unable to change your password in safe mode.
When deciding how to unlock a laptop, the user can go in two ways. The system code can be hacked or recovered. It all depends on the system itself. Thanks to this approach, information on the hard drive will not be lost. Therefore, these methods are considered quite effective and appropriate. If you follow all the recommendations in the instructions without deleting other files, the purpose of which the user may not even know, the laptop will turn on again. When faced with a similar problem, you should consider past mistakes and store your password in a safe place.
Synchronizing user data within one account is a fashionable trend today, which has its advantages. Many log in Chrome browser under account Google entry, thereby having its own browser settings on different devices(different PCs, smartphones). Microsoft provides similar functionality in its new operating systems.
During Windows boot 8 and 8.1 when working through an account Microsoft system asks you to enter the user password, and so on every time you turn on the computer. Of course, security is paramount today, but if the computer is used only at home and only by you, the need for constant authorization loses relevance and begins to cause inconvenience.
How to disable the password prompt in Windows 8.1 and 8 when you turn on the computer when using a Microsoft account?
Using a keyboard shortcut Win+R let's open the utility Execute. In the window that opens, enter and click OK.
In the window that opens " user accounts"select the required user and uncheck the box for him in the item Require username and password.
After that, click Apply. A window will open to fill in the data for automatic login into the system. The username will already be filled in here, all you have to do is enter your password and click OK.
Now you can safely restart your computer and watch the login to Windows 8 without asking for a Microsoft password.
II Method.
Replacing your Microsoft account with a local one
On the menu Start select Change computer settings.
Go to the tab Users and further on setting Switch to local account.
In this case, the system will ask you to enter the current password for your Microsoft account - fill it out. Then we will be prompted to enter a new password for the local entry - we don’t enter anything here, just click Further, then there will be a change users.
