Sony laptop system recovery. How to restore the system and configure drivers in Sony Vaio laptops
.1. Press the ASSIST button on your VAIO Notebook PC to launch the application VAIO Care (Desktop).
If a window is displayed User Account Control, select Yes .
2. Select Additional Tools(Advanced Tools), Restore and recovery and Create Recovery Media.
3. Read the instructions on the screen carefully and select Next.
4. Choose desired type media (in my case "USB flash drive").
5. If we select a flash drive, a window appears:
6. Connect the USB, and make sure it is detected under "USB Flash Drive Detected" and click next..
7. Pay attention to the warning and click "Create Media".
And the process is started:
And finally:
Note
- Keep the recovery disk in a safe place.
Considerations for creating a recovery drive
- - the data in the recovery partition has been modified using a data modification application;
- - has been installed operating system, which is different from the operating system preinstalled on the computer;
- - the built-in storage device has been formatted without using VAIO Care (Rescue Mode) : Recover or maintain your system .
Laptops originally shipped from the factory are often equipped with the Windows OS that comes pre-installed with your model, except for budget laptops with FreeDOS or Linux. At this point, the PC already has several native programs and a basic set of drivers / codecs.
It may be necessary to restore factory settings on a laptop in cases of OS failures, especially if you can’t even start it. Rollback to basic settings implies the restoration of the original state of the system and can be a solution to the vast majority of malfunctions.
Can you restore factory settings?
As with any action, recovery requires a source that will provide necessary information, and through processing it will lead to a rollback. Windows contains the necessary data in a hidden system partition, so if you haven't formatted the drive, it should remain.
Often this occurs as a result of calling the master, who either does not know how to do it. correct installation or just not interested in it. This situation leads to the fact that the partition is overwritten and, of course, cannot be used.
Also, when buying a laptop and using it for the first time, you will be offered to backup this hidden recovery partition to DVD disc which may serve well in the future. Usually it is necessary to have about 3 disks for burning.
Also, if you bought a laptop with FreeDOS, Linux and its versions, then you will not have this section, since you reinstalled the OS on Windows. This makes it easier to simply restore the system from installation disk Or even reinstall.
Why is returning to factory settings a higher priority than a simple reinstallation of the system? It's all about ease of use. An ordinary user who has never installed a system or restored settings can easily perform this operation, but in the process of rewriting the OS, problems may arise. Also, along with ease of perception, there is also speed of action, since no driver installation is required, because everything is already there.
The main distinguishing information is that each manufacturer has developed a unique access to the recovery program. Basically, the hot key on the laptop changes during the startup process, and almost all have a program with a Windows interface, that is, you can restore it directly from the desktop.
How to restore factory settings on an Asus laptop?
There is nothing complicated in the rollback process, only one caveat is the need to deactivate the system quick start. Such a function blocks the recovery utility. This is done from BIOS or UEFI. To perform actions you need:
- To disable the Boot Booster function, you need to press F2 during the startup process to get into the BIOS window. Using the keyboard, go to the "Boot" section, where the corresponding item is located. Change the setting's state to "Disabled". Now press "Back" or Esc and save the settings;
- Now again in the process of starting the system in Asus laptop press the F9 key, after which the program screen will be displayed;
- Next, the preparation process will start, when all the necessary operations are completed and the laptop is ready to perform the operation, you will see a warning window about the delete all files action. You should agree, but perhaps before, if you have access to the desktop, you need to make a backup of the data;
- As a result, auto recovery will start, user participation is not required. You should not be afraid of problems when the laptop reboots several times during the process.
An important nuance to consider is that your laptop must be connected to the network so that during the installation process there is no shutdown due to battery discharge.
Recovery on an HP laptop
A similar execution image for this manufacturer, you should:
- Press F11 when starting the laptop;
- Now find the item "System recovery";
- Before performing a restore, you will have the opportunity to record important files to removable media;
- Wait for the recovery to finish, then you can install the programs you need and get completely working environment work.
Built into HP PCs recovery utility Manager, we accessed it through the Live CD, but the same can be done with a login. Use the search by program name and run it.
Factory reset in Acer
The main difference from other manufacturers in the process of entering the recovery menu. To do this, hold Alt and press F10 at intervals of half a second. Immediately after this, you will see a protection window, it will require you to enter a password, standard 000000 or, if you have already made settings in the system, then specify your own.
Among the pre-installed Acer programs, there is also Recovery Management, which can fulfill your desire to roll back the system, directly through the program's working window.
Samsung laptop recovery
- During the OS startup process, press F4;
- Now select "Restore";
- Then click on "Complete restore";
- You will need to select the point to which the rollback will be made, the factory settings are called "Computer Initial Status".
You can also run the utility in Windows Samsung Recovery Solutio, it performs the same steps, follow the instructions in it in the same way.
Rollback on a Toshiba laptop
The process is also automatic, the only thing you need to know is how to enter the utility. You require:
- Turn off your PC;
- While holding 0 (on the character block of the keyboard), press the "Power" button, turning on the computer;
- Release the key when you hear a characteristic squeak.
Restoring factory settings on Sony Vaio
Most laptops are equipped with a special "Assist" button, press it at startup and you will be taken to the desired menu, then:
- Select the "Start Troubleshooting" section;
- Select the layout (language), now set the selection to "Diagnostics";
- Go to "VAIO Recovery Tools";
- Now select the item characterizing your version of Windows;
- Finally click on "Start the recovery wizard".
If you did not find your laptop among those presented, then use the manufacturer's official documentation, which undoubtedly contains this section.
If you still have questions on the topic “How to return a laptop to factory settings?”, You can ask them in the comments
Hello friends, in this article we decided to tell you how to factory reset laptop. Let's start with the manufacturer Toshiba (for those who are interested, you can read a separate article -), the second is the Sony laptop, the third HP pavilion. Separate articles are written for laptops, and,. Well, then we will try to supplement the article with information on products from other manufacturers, judging by your letters, this topic is interesting to many of our readers.
- Good day, I wanted to ask you how to restore a laptop to its original factory settings? I know that these settings are in a hidden section hard drive, but I inadvertently deleted this section and now when I try to roll back to the factory settings, I get an error. I did not create DVD recovery discs, and in general, I have never had a chance to restore a laptop to factory settings. What is the way out of my situation?
- Hello admin, please explain how to me. Toshiba laptop, it has hidden section, also drive C: and drive D:. I didn’t touch the hidden partition, but on drive D: I deleted everything, and now I can’t roll back to the factory settings, they say Toshiba laptops use a hidden partition to restore factory settings and some other HDD RECOVERY folder, which is located just on the disk D:. What should I do now?
- I bought a Toshiba laptop, the instructions for the laptop say, if you want to roll back to the factory settings, press the F8 key, the recovery program will start. I pressed it, but Additional download options are launched and that's it ... And then, what should I do? And another question, at the first start, a message appeared - We recommend that you create a rescue media on a USB flash drive or DVDs, using the Recovery program, it will help you restore the contents of the computer to its original factory state, even in case of serious damage to the computer. Explain how to use this recovery media in case of problems?
- Hello, tell me how to restore the factory settings of a Hewlett-Packard (HP) laptop if the beech does not boot at all. When loading Windows exits with an error.
- Admin, please answer this question. All laptop manufacturers bundle them special program RECOVERY, located in a hidden partition, using this program, you can roll back the laptop to factory settings in case of serious problems with the operating system. Question - Is there any alternative to this program?
How to factory reset a laptop
When does it occur to us to restore our laptop to factory settings? That's right, when we no longer understand what is happening to it, and most importantly, the laptop itself does not understand what is happening to it, because of dozens of unnecessary partitions created on it, four installed operating systems, thousands of different programs and three antiviruses.
- Note: Before a factory reset, you can copy all data from the C: drive and the desktop using .
Many users may notice that in such a situation, you can reinstall Windows with all programs, drivers, and that's it. But I, in turn, will notice restore laptop to factory settings, for an inexperienced user, much easier. No need to then suffer with the search and installation of drivers for all devices, you just need to reinstall desired programs and that's it. The only thing that confuses many in this situation is that many have never run this same laptop restore to factory settings in their lives. To acquaint you with this restoration and the purpose of our article, I hope after reading it, you will have a better idea of \u200b\u200bhow it can be done.
I have to restore factory settings on various laptops quite often and I want to say that the recovery mechanism itself is almost the same on all laptops, but of course there are always nuances that are better known in advance.
First rule. During a factory reset, network adapter The power supply must be permanently connected to the laptop.
You reboot the laptop and press a certain key on the keyboard when loading, then the factory reset program starts, here you need to be careful. The factory reset program may prompt you to restore only the C: drive or restore the entire HDD. If you select the C: drive, then only it will be restored to factory settings, and the rest of the partitions with your data will remain untouched. If you choose to restore the entire hard drive to factory settings, then all the partitions you created, with all your files, will be deleted and your laptop will be in the same condition as at the time of purchase.
Where is the laptop factory settings program located?
Usually in a hidden section of a laptop, which is called the "Recovery Partition", the volume is up to more than 20 gigabytes. You can see it if you go to Computer Management->Disk Management. It is advisable not to delete this section, otherwise you will not be able to restore the laptop to factory settings.
Toshiba laptop owners need to know that in addition to the hidden RECOVERY partition, they also have the HDD RECOVERY folder located on the D: drive, which cannot be deleted either.
Note: Friends, if the hidden partitions on your laptop have not been deleted, but the factory restore program does not work, read our article -.
Why create laptop recovery DVDs?
As soon as we bought a laptop and turned it on, on the screen, immediately after the appearance of the working Windows desktop, the laptop manufacturer's service window appears prompting you to create laptop recovery DVDs. That is, we will create the same hidden partition with factory settings, but on DVDs. This is done in case the hidden section of the laptop, for some reason (usually the fault of the user) is damaged or removed completely.
To create recovery DVDs, you usually need 3 blank CDs. In case of serious problems with a laptop, for example, you cannot load the operating system at all, and your hidden partition has been deleted, we can restore factory condition laptop using the recovery DVDs you created earlier.
Hotkeys for Restoring Laptops to Factory Settings
ASUS - When the ASUS splash screen appears, press F9
Acer-Alt+F10
HP pavilion - when you turn on the laptop, press the esc key. Enter the startup menu, then press the F11 key
Samsung-F4
Sony vaio-F10. On new Sony laptops VAIO uses a dedicated button Assist, try clicking it on boot. Loading VAIO Care, select from the menu Start Troubleshooting (Recovery) -> Select keyboard layout English -> Diagnostics -> VAIO Recovery Tools -> Windows 8 -> Start Recovery Wizard(System Restore step by step).
Toshiba - F8 or on latest models 0 or even need to press fn+0
Packard Bell-F10
Dell inspiron - press Ctrl+F11 when the dell splash screen appears
Fujitsu-Siemens-F8
LG-F11
Lenovo-F11
So, first we restore the Toshiba laptop to factory settings, press F8 when loading, (if you have one of the most latest models Toshiba laptop, then immediately when you turn on the laptop, press and hold 0), a window appears Additional download options. Choose Troubleshooting your computer and press Enter.
Selecting language settings.
Choose a tool Toshiba recovery HDD RECOVERY or it may be called Toshiba Recovery Wizard .
In the next window, we are warned that drive C: will be restored to its original state, that is, everything will be deleted from it and its state will be given at the time of purchase of the laptop, drive D: will remain untouched.
You cannot interrupt the operation, so make sure that the AC adapter is connected to the laptop. Click Yes and start the process of restoring the laptop to its original factory state.
Factory reset in progress
The software and drivers are being installed.
Choose a username and password for your account. We set the date, time, they are usually correct by default. If you wish, you can register your laptop for a warranty extension.
The first Windows startup. That's all
How to Factory Reset a Sony Laptop
Press the F10 key at boot and enter the Dispatcher Windows boot, select using the keyboard Launching the VAIO Recovery Center.
A window appears in front of us, in which we can familiarize ourselves with the recovery options.
For example, choose Repair drive C: and in the next window we read information about what will be restored.
Drive C is restored: to the factory state, all software is reinstalled, but not the software installed after the purchase of the computer, it will have to be installed again. This program deletes all files on the C: drive, but does not affect files on other partitions.
If we choose Complete system restore, then everything on the C: drive and all other partitions will be deleted. After recovery, all disk space will be occupied by drive C:
How to factory reset an HP laptop
If the laptop does not boot at all due to system errors and you want to restore its original settings, then, in order not to lose your data, you can boot it from any Live CD, then transfer important files to a portable hard drive, then restore the factory settings, since when restoring the factory settings, all your data from the laptop will be deleted .
Press the key when turning on the laptop E sc.
We enter the boot menu, as we see, the F11 key is responsible for restoring the factory settings - System Recovery. Press the F11 key.
A window appears HP Recovery Manager. Here we need the item " Restoring the system to its original state when shipped from the manufacturer».
We click on " Restore without creating a backup files" and click Next.
Now I need to turn everything off. external devices: printer, scanner, mouse, click Next and the process of restoring the factory settings of the HP laptop will begin.
Is there an alternative to the factory reset program built into the laptop? Yes, they are programs. and and they have a lot more opportunities.
On many laptops that come preinstalled with an operating Windows system, it is possible, in the event of a system crash, to restore the state of the installed software at the time the laptop was first turned on. In this article we will talk about laptops from Sony and pre-installed on them software VAIO care.
This utility is designed to restore Windows Health by restoring it from a special hidden partition that stores an image of the operating system with all pre-installed programs and utilities. After system recovery from this image, you will receive the operating system in the same form in which it was when you first started your laptop.
Typically, the VAIO Care program launches when you press special key assist. First of all, before starting system recovery, connect to the laptop Charger, in order for the process Windows recovery was not interrupted at the most inopportune moment due to the discharge of the battery. In addition, restoring Windows from an image will destroy all information located on local disk C. Therefore, if you still have valuable information on this disk, then take care to copy this data to external media.
So, the computer is turned off, the charger is connected. We press the Assist button, after which we launch the VAIO Care program in Rescue mode. If your laptop does not have a separate Assist key, then the VAIO Care program starts in a different way. You need to turn on the laptop and when the VAIO logo is displayed on the screen, press the F10 button, which will launch the VAIO Care program.
After VAIO Care launches, the main program window will be displayed in which you will need to select "Start Recovery" or "Start Troubleshoot", and then you will need to select "System Restore" ("System Restore"). If you have previously backed up your system using VAIO Care, you will see a list of control points with dates for which you can restore the state of your system.
If you didn't do backups, then you will have only one restore point in the list, and when you select it, the system will be restored to its original factory state. After selecting a restore point, you just have to click on the "Finish" button to start system recovery. The recovery process itself can take from 15 minutes to 1 hour, so you will have to wait. During the system recovery process, your laptop may restart several times, and after the recovery process is completed, you will be prompted to perform the initial Windows settings.
In some laptop models, instead of a hidden partition with a system recovery image, one or more DVD discs, which the recovery program will require you to insert into the drive. Please note that if you delete a special hidden partition with a Windows recovery image while using your laptop, VAIO Care will report an error and will not be able to restore your system.
In this case, you will have to resort to the services of a specialist or contact service center. Also, if you launch the VAIO Care utility and do nothing for 5 minutes, the computer will automatically turn off. That's it, I hope this information will help you restore the system on your laptop.
(No ratings yet)Owners Sony devices VAIO often face such an unpleasant problem as system freezes. This does not allow you to fully use all the features of the device. Reinstalling the system or returning to the laptop settings that were on the device at the time of purchase helps to get rid of the annoying problem.
However, many problems can be solved in other ways. But if the problem is difficult enough to solve, sometimes only a return to the factory settings can help. This will eliminate all existing problems and return the device to its previous performance. In addition, thanks to the restoration of the factory settings, it will be possible to get rid of any malware.
- In order to restore the laptop to factory settings, you need to take a few steps:
- click on the "Start" icon and open the "Programs" tab;
- click on the VAIO Care icon;
- click on the "Restore and backup" icon;
- click on "Restore the previous state of the device";
- after you click on “Yes”, the system will start to recover and start its factory reset.
During the system recovery process, all your personal data and programs will be deleted: it is advisable to save all valuable information in advance.
After the end of the process, the operating system will be cleaned, which means that the speed of the device will return to its previous level.
