The best custom firmware for Samsung Galaxy S6 and S6 Edge. Firmware Samsung Galaxy S6 Firmware galaxy s6
Good day, dear readers. Today we will look at available options firmware samsung galaxy S6. As a rule, most update automatically via Wi-Fi. But there are non-standard situations in which our favorite, and users want to know alternative methods for updating it.
All update methods
Download update via Wi-Fi Below we list the ways we know how to successfully flash the Galaxy S6:
by the most in a simple way The update is rightfully considered a firmware update over Wi-Fi. A minimum of complexity and time wasted, just go to the settings menu and start the update with one click, if it is installed by default. The automatic software update feature on the Galaxy S6 is quite cultured, and before launching an update, it will give you a few options for when it's best to do so.
The second comfortable option is to update the firmware through the official Samsung software. To do this, you need the Kies software, this is a whole service for working with smartphones, including firmware updates.
You can also contact service center if your Galaxy S6 is official (PCT). It is subject to the company's VIP service, which includes free service. A nice bonus is a six-month maintenance, after the expiration of the official warranty.
The above options for updating the firmware are official. In addition to them, there are also unofficial ones, they are also called "custom". The most popular program for firmware today is Odin, its version is periodically improved, so we do not specify it exactly. But with this kind software you need to be extremely careful if you still decide on such firmware. In one of the articles, we described in detail the entire Galaxy copies S6.
Regardless of which smartphone you choose - Galaxy S6 or Galaxy S6 Edge, in any case, you get the same TouchWiz interface, which this time has become a little simpler and lighter. However, this does not mean that you should not pay attention to custom firmware. In contrast, third-party builds of Android ROMs tend to offer more performance and improve battery life. And let's be honest, the Galaxy S6 and Galaxy S6 Edge lack a larger battery. Enough time has now passed for developers to release stable builds for the Galaxy S6 and Galaxy S6 Edge.
Unfortunately, there are still some problems. This is due to the fact that Samsung used a new proprietary Exynos processor in the new flagships, and this is problematic for custom firmware. On the other hand, there are still craftsmen whom this does not stop and you are offered several firmware options indicating the model numbers of smartphones on which you can install the assembly.
As usual, you should think twice before installing third-party firmware to a smartphone. Always follow the instructions and be careful, because in the future you will have to address all claims only to yourself.
XtreStoLite Deodexed Mod Edition 1.2
Available for SM-G920F / SM-G920I / SM-G920T
The firmware has a rather small size (467 MB) and is a rather light version of the firmware with TouchWiz for the Galaxy S6. XtreStoLite offers all the most requested TouchWiz features. The assembly is assembled from the stock G920I DVU1AOE3 Lollipop 5.0.2, however, the stock “weighs” almost 1.5 GB and does not have all the features and settings, mod support that XtreStoLite has. There are 5 options in the reboot menu at once, a new SuperSU and Busybox sewn into the firmware, the absence of Knox, recording phone calls, numerous interface tweaks and many other improvements. Moreover, some problems of stock firmware are solved here - system memory will not overflow and applications will not be forced to close.
This firmware has a lot of new features on top of the stock TouchWiz. For example, the assembly received new firmware tethering (XXU1AOE3), supports Edge Contacts (which is found in the Galaxy S6 Edge), allows you to change the status bar, adjust the backlight duration time, easily switch between user accounts, there are many new settings for the stock launcher, the network speed is indicated in the status bar, and much more. This build isn't that small compared to the rest, but it's worth a look.
AllianceROM
Available for SM-G920F
AllianceROM has several different themes for the user interface, but each user can fully customize the interface and change the system settings according to their requirements. Pretty impressive list. additional features, and some are really unique, which you will not see in other custom firmware. I won't list them all for brevity, but the most important ones deserve a mention - AllianceROM for Galaxy S6 is initially rooted, firmware is deodexed with the latest Busybox, init.d, Sqlite scripts are pre-installed, all stock TouchWiz features remain, Aroma installer for choosing settings firmware you want to install.
WanamLite has a solid list of features, making it an attractive option for those looking for a "stock" but with better features. First of all, the firmware has a stock kernel that has been improved, there are root rights and Busybox support. If you are a fan of extra functionality, including phone call recording, an improved camera app, and other user interface improvements, check out WanamLite.
Car HD ROM v.1
Available for SM-G925F
Although the developers of this firmware release builds for other models, CarHD ROM for the Galaxy S6 Edge is a real shortage - the interface here is translucent, although someone may not like it. The assembly is based on the latest official firmware (XXU1AODG) and has all the usual attributes of custom firmware - root-rights, latest version SuperSU, BusyBox. The firmware is suitable for those Galaxy users S6 Edge who don't like stock firmware.
This is one of the few ROMs for the Galaxy S6 that is also available for the Galaxy S6 Edge. VN ROM has the most latest firmware for tethering (XXU1AOE3), supports Edge Contacts with Galaxy S6 Edge, allows you to change the status bar, adjust the backlight duration time, quickly switch between accounts, various new features of the stock launcher settings, network speed in the status bar and much more. This firmware is not as “light” as some other builds, but it has a lot of features.
Instructions for installing the official single-file firmware on the Samsung Galaxy S6 (SM-G920x).
Drivers and programs
Attention!
To install the official stock firmware on the Galaxy S6 and return the phone state ("Settings" > "About device" > "Properties" > "Device status") to "Official" after switching from custom firmware and thereby return the ability to receive updates over the air is enough follow the instructions provided.
Installation instructions
Download and install phone drivers.
ATTENTION!
If already installed Samsung program Kies, you do not need to install drivers. You just need to completely unload Kies from memory, through the task manager, and then continue.
Disable option " Activation Lock» in the security settings of the device.
If the smartphone data has been encrypted, it must be decrypted.
Download and unzip the archive with the program to an arbitrary folder.
It is important that there is no Cyrillic in the path to the folder. For example, "C:\S6FW\".
Unzip the downloaded archive to a folder with Odin PC for convenience. The file in ".tar" or ".tar.md5" format must be left, but "SS_DL.dll" can be deleted.
Perform a data reset on the device.
To do this, go to the settings on the tab " Accounts
» to the section « Archive and reset”, select the item “ Reset device” and press the button “ Delete everything". The phone will reboot.
Run Odin PC as administrator.
Put the device into download mode ( Download Mode).
To do this, simultaneously hold down the Volume Down, Home and Power keys. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.
In this state, connect the smartphone to the computer. In Odin, the inscription " COM».
Click on the button " AP» and select the TAR archive of the firmware.
Items « Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition", if active - must be disabled.
Click on the button " start". The firmware installation process will begin.
At the end of the operation, if everything went well, the message “All threads completed. (succeed 1 / failed 0)". The phone must be rebooted manually by holding down the power button until the screen turns off. The initial boot of the device may take up to 5 minutes.
ATTENTION!
If the device does not boot for a long time or a data reset has not been done, it must be performed from the recovery.
To do this, simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading select " Wipe data/Factory reset", then - " Reboot system now". If after these steps the device also freezes at boot, you need to reflash it again.
Firmware instructions Samsung smartphone Galaxy S6 SM-G920F on the new official android firmware, as well as getting Root rights superuser on a Samsung Galaxy S6 SM-G920F phone.
Before starting firmware Samsung phone Galaxy S6 SM-G920F, download first desired programs and files to your PC.
1. Download the firmware program - (this program is used in official Samsung services).
2. Drivers to connect your smartphone to your PC - Drivers for Samsung Galaxy S6
3. Then download the firmware you like for the Samsung Galaxy S6 SM-G920F smartphone, for example, one of these:
4. Unpack the Odin firmware and firmware to any folder (I find it most convenient on the desktop).
Note: Sometimes Odin gives FAIL! due to the presence of Cyrillic (Russian letters) along the path to the firmware (For example, C:\Users\Name\, etc.).
5. Run the program Odin as administrator (right click on the icon - run as administrator - Yes).
Note: Usually, when you simply open Odin, it will automatically ask you for permission to run as administrator.
6. After starting Odin, we arrange the firmware files in the following order:
File BL……….tar.md5 is inserted into the field "BL"
AP file……….tar.md5 is inserted into the field "AP"
The CP file……….tar.md5 is inserted into the field "CP"
CSC file……..tar.md5 is inserted into the field C.S.C.
7. We transfer the phone to the firmware mode (To do this, in the off state, press and hold the buttons Volume down + Home + nutrition and after the menu with a yellow triangle appears, press the button volume up, which actually confirms the desire to enter the firmware mode of the smartphone Samsung Galaxy S6 SM-G920F.
8. We connect the SGS 6 smartphone to the PC, in the Odin program it should recognize the phone (in the upper left corner the ID: Com inscription will turn blue), after which it is safe to press the button start. The Samsung Galaxy S6 firmware process has been launched, you can follow the firmware progress in the log window, the smartphone firmware lasts from 3 to 15 minutes in time, it all depends on the capacity of your PC. Upon completion of the firmware, the phone will reboot itself.
Note: If for some reason your PC does not recognize your device, try reinstalling the driver and / or try other USB ports or change USB cable.
Are one of the best-selling and successful, thanks to their attractive prices and not only.
The Chinese and Korean copies of Galaxy are copied to the smallest detail, they cannot be distinguished from the original with the naked eye.
If you bought quality fake, you will need to flash a copy of the Samsung Galaxy S6 SM-G920F.
Why is this needed and how is it done, you ask? This will be discussed in today's post.
Why do I need a firmware copy of a smartphone?
Novice smartphone users do not quite understand what the word "firmware" means. For most, this word is cryptic. In fact, everything is simple, so you can make settings.
Each smartphone, including the Samsung Galaxy S6, runs an operating system (Windows, Linux, iOS, Android, etc.), similar to modern computers.
The operating system in them, in other words, is the "brain" that controls them. Without it, any gadget can be called "dead iron".
In smartphones operating system stored in internal memory. It needs to be installed, such a procedure is called “firmware”, where the system is flashed (written) into the internal, permanent memory, in simple terms- settings are being made.
Now consider how to set up a copy of Samsung Galaxy S6 SM-G920F?
Beginning, preparatory moments
Before you start making smartphone firmware, download to PC necessary programs and files. There is a program that can be used in the official Samsung server - Odin v3.09. Or choose any others.
You will also need drivers. This is necessary for the phone to communicate with the PC.
Finally, download the firmware you like for Samsung Galaxy S6 SM-G920F. For example, G920FXXU4AOCV_6.0_marshmallow.
Instruction
- Unzip the firmware and the firmware itself to any of the folders.
- Run the Odin v3.09 program (this is done on behalf of the administrator).
- Arrange the files in the following order: in the BL field - the BL file, in the AP - the AP file, in the SR - the SP file, in the CSC - the CSC file.
- Put your smartphone into firmware mode.
- Then connect SGS 6 to PC. At the same time, the firmware program starts to recognize the smartphone and, in upper corner on the left, the inscription ID:Com will light up in blue.
- Press the "Start" button.
- The Samsung Galaxy S6 firmware process is starting.
- Monitor the progress of the process in the log window.
How long does it take?
Very little. The firmware lasts from 4 to 20 minutes, it all depends on the power of your personal computer. When the process is complete, the phone will reboot itself. Done, the process is complete.
If for some reason your device is not recognized personal computer, reinstall the driver. You can also change the USB cable or try another USB port.
As you can see, the firmware copy of the Samsung Galaxy S6 SM-G920F is not difficult. I think you managed to figure everything out.
Korean and Chinese Samsung copy Galaxy can be easily configured by any user independently and quickly enough.
