When playing, the screen goes blank and the computer freezes. Reasons for turning off the monitor during the game

If the monitor turns off during the game, but the PC itself is working, the essence of the problem does not always lie in the monitor.

The problem may be a connection error, a malfunction of the video card, or other components, as well as for other reasons. Below we will consider the reasons why such a popular nuisance may occur.

Since the monitor display goes blank while playing a game, but the computer is running, you need to start by checking the most obvious cause of the problem.

First, turn off the PC, and then turn it on, watch the monitor.

1. When you turn on the computer, the monitor cleared up and immediately darkened? Perhaps this is due to the backlights that are installed in LCD monitors. They could well burn out.
2. The monitor display is dark, but when illuminated under the backlight, it is very faded? Surely, the point here is a malfunction of the voltage inverter.

To understand what is the cause of the malfunction, disconnect the monitor from the system unit. If the inscription “No signal” or something similar does not appear on the display, then you cannot do it on your own.

Repair can solve the problem. In the worst case, you will have to purchase a new monitor.

Turning off the display

Your monitor turns on, works great, but after 15 or 30 minutes it immediately goes out. What is the problem?

By default, Windows has a special function "turn off the screen after a certain amount of time." It's all about her. "It just can't be!" many will say. Maybe. But this should definitely be checked.

It would be stupid if, because of such a trifle, you spend a lot of nerves and time trying to find out why the monitor goes out during the game. In addition, the verification itself will take no more than 2 minutes.

Instructions for OS Windows 7

• Select the following item: Start - Control Panel - Power Options.
• Select the Power Plan Settings tab.
• In the "Turn off the screen" tab, select the "Never" field.

On Windows 8 and 10, the procedure is almost the same.

Instructions for Windows XP users

• Right-click on the desktop, select "Properties".
• Go to the "Screensaver".
• Press the "Power" button (bottom right).
• See the "Turn off the display" field, select "Never".

Humidity

Another very popular reason why the monitor turns off during the game is humidity. You may not believe it, but if a laptop or PC stays in a room with humid air for a long time, then this causes certain malfunctions in its operation.

As a result, the monitor turns on and off quickly. This is because condensate accumulates in it, which, of course, will not work well.

What to do in such a situation? Do not turn on the computer for a while, let the water evaporate. Thus, you will solve the problem (if, of course, it is in it).

Have you cleaned your laptop or system unit for a long time?

The problem is as old as the world, but nevertheless. How long have you been cleaning your own Personal Computer? If it's been a long time, then that might be the problem. And now you are trying to understand why the monitor goes blank immediately after loading the game.

Dust can interfere with the operation of RAM or a video card, so it is advisable to clean the system unit as soon as possible. Or take it to the nearest service center- let them clean it up. Do not start the computer to such a state in the future.

Poorly connected wires

Another reason why the PC monitor turns off during the game is poorly connected wires. We are talking here about the cord from your monitor to the system unit (more precisely, to the video card).

1. Perhaps you accidentally hooked it, pulled it.
2. Maybe one of your family members did it, or maybe your favorite dog or cat.

In any case, this must be checked first. For this:

• Disconnect the wire from both sides.
• Blow and wipe.
• Then plug it in again.

It may well help. At first, it is advisable to disconnect the cord only from the side of the monitor. If the inscription “No signal” appears on it, then there are two news for you. Good - everything is fine with him, he did not break, bad - you still do not know why the monitor turns off during the game.

Another common problem is cable damage. In order to check this, you need to find the same cord, connect it.

RAM problem

Pretty rare, but it does happen. If the monitor cuts out while playing, then your RAM may simply be out of order, or you installed new RAM that is not compatible with your processor or motherboard.

In the first case, it is desirable to perform RAM diagnostics using special program called memtest. If not compatible, only a complete replacement will help you.

video card

Often the monitor goes blank due to a broken video card. After all, this element is responsible for displaying the image on the display. And the cord from the monitor is connected to it.

1. The most reliable method to make sure that the monitor goes out due to the video card is to connect another one, try turning on the PC. You can take it from friends or acquaintances.
2. As another option, you can connect someone else's monitor (again - you need to borrow it from friends). If this is not possible, then just skip this step and move on to the next one.

It is possible that the monitor or display on the laptop turns off due to severe overheating of the video card. The cooler (special fan) broke down, the cooling system does not cope with its task.

To verify this, turn off the personal computer and wait half an hour or more. If the problem was precisely in overheating, it should turn on in standard mode. In this case, you will need to resolve the issue of cooling the video card, or replacing it.

Video card driver conflict

Another one common cause, due to which the monitor turns off during your favorite game - this is a conflict of video card drivers. In order to check this, you need to do the following:

• Start - Control Panel - Device Manager (for more convenience, you can select the view mode called "Large Icons" in the upper right corner).
• In the new window, click on "Video adapters", after which the name of your video card will be displayed.
• Click on it with the right mouse button, select "Properties" and look at the status. If the video card is working normally, it will be written in a new window.
• Select "Resources" and read if there are any conflicting devices.
• If all is well, close all windows. Click on the desktop with the right mouse button, select "Display Resolution" and select the minimum - for example, 800x600 pixels. Click "Apply" and restart your personal computer. If it turns on, the problem is completely fixed.

Video card driver not working properly

If the device does not work normally, conflicts were found, or the previous method did not help you, then we will act more aggressively:

• Reboot your computer to safe mode and go to Device Manager.
• Open the "Display adapters" tab and find your graphics card.
• Right-click on it and select "Uninstall" (this is the standard procedure for removing the selected driver).
• Confirm the deletion and restart your computer. It should start up normally.
• Install the driver for the video card from the disk that comes with the kit, or download it from the official website.
• Restart your PC one more time to make sure your monitor doesn't go blank anymore.

It is advisable to install drivers exclusively from the disk.

Processor or motherboard failure

This is probably the worst possible choice. It is a processor failure or a short circuit in the motherboard that often leads to the fact that the screen quickly goes blank, and the computer continues to function.

The system may still work. In particular, coolers will spin as usual, creating the illusion that everything is fine. But in such situations, replacement may be required. motherboard or a processor, and this will already have to fork out.

However, problems with the monitor could have started for other reasons, but in this particular case it is advisable to entrust computer diagnostics to experienced specialists.

Monitor resolution

In 90% of cases, a similar problem begins to disturb users due to the fact that they have set their monitor settings to very high.

Each individual model only supports a specific resolution and refresh rate. If you select parameters that exceed its capabilities, then the screen goes blank during the launch of the game.

• A special inscription "Out of range" appears.
• The display just goes black.

For owners of older monitors

However, there is another important point. And it occurs, as a rule, in owners of older monitors with a resolution of 1024x768 or 1280x1024 pixels.

The thing is that game developers prescribe a specific resolution in their creations by default. Usually it is much higher than 1280x1024 pixels. That is why the monitor turns off in the game. He just doesn't support too high definition(or refresh rate).

This issue has been observed in S.T.A.L.K.E.R, Far Cry 3, and other games. Then many gamers complained that the screen goes blank during the game.

Solving this problem is quite simple:

• You need to find the configuration file. It may have a different name, but it always has the .ini format. It is located in the game folder or in "My Documents". More precisely, you can find out on Google by the name of the game.
• In the configuration file, you should find the line that specifies the permission, and then change it to your own, save.
• All you can play.

Thus, the problem when the computer monitor goes blank in games will no longer bother you.

Conclusion

We really hope that one of the above methods helped you solve the problem. If the monitor display is still blank, then the cause may be faulty hardware. In this case, it is better to look for other solutions to the problem, or immediately go to the service center.

At first glance, it may seem that the monitor is a less important hardware component of the computer than, say, the processor or HDD. This is partly true, because the display, if it is external, is easier to replace, but if it fails, both the processor and the hard drive are useless, because it becomes impossible to control the system without an interface. And, I must say, problems with the display are not such a rare phenomenon, and most often users have to deal with its sudden shutdown.

An accident can happen at any time, the monitor goes off periodically and it seems like for no reason, although there is, of course, one. But, in general, there can be a great many reasons, so there are often problems with diagnosing this problem. For example, when the monitor turns off while the computer continues to work, this can indicate both a hardware failure and malfunctions of the graphics drivers, and, unfortunately, the first cause is much more common.

Nevertheless, at first it is still worth excluding the software component. If you have uninstalled or updated video card drivers before, it is quite possible that the problem is caused by a new version video driver. In this case, it is recommended that, after booting into safe mode, remove the problematic driver and install a working one or roll back to the previous one. If the monitor turns off while playing, the culprit could also be a driver not doing its job. This happens when you start "heavy", demanding games on the hardware resources of the video card. Here, on the contrary, it makes sense to update the drivers to latest version or install third party software such as NVIDIA.

What else causes the monitor to turn off suddenly? Let's figure it out.

System settings

First of all, consider the situation when we are actually not talking about some kind of malfunction. A very common reason why the monitor turns off while the computer is running is the function of turning off the display after a certain time, which is available in all popular Windows versions. True, it is activated only if the user does not perform any actions on the PC. If this is your case, open your current power plan settings and see if you have timed out for the Turn off display setting. If yes, select "Never" from the drop-down list.

Hardware problems

Often, the monitor spontaneously turns off due to hardware problems, which can be very different. A commonplace situation is damage to a cable or connector. If the cable is old or has been subjected to strong external influences, it is likely that it has defects. Inspect it, make sure there are no kinks and kinks, at the same time check the serviceability of the connectors and adapters. To completely eliminate problems with the cable, replace it with a new one.

Faulty monitor

You can not discard the option with a malfunction of the monitor itself, however, in this case, it will most likely remain dark or go out a few seconds after turning on the computer, although there are exceptions when the monitor screen periodically goes blank for a couple of seconds. The first can be a sign of problems with the backlights, the second - indicate a malfunction of the voltage inverter.

In order not to guess what's the matter, disconnect the monitor from the system unit. If it is OK, the message "No signal" or "Cable disconnected" should appear on the screen, in otherwise this will indicate a problem with the display itself. If possible, try connecting the monitor to another PC.

Video card failure

This is another reason why the monitor goes blank while the computer is running. What to do in this case? As a rule, the video card is replaced, but before that you still need to make sure that the problem is caused by it. Remove the video card, check it for swollen capacitors, traces of oxides, etc., make sure the contacts are in good condition, and then reinsert it. If you have another computer at hand, test the video card on it.

Overheating of hardware components

Overheating of components, including a graphics card, does not always lead to a BSOD or shutdown of the computer. Increased loads that occur, for example, when running particularly demanding games, may well cause the shutdown of individual components. If the monitor turns off during the game, and the system unit continues to work and the audio is also normally reproduced, then overheating is very likely. The problem is solved by cleaning the system unit, installing a more efficient cooling system,.

Unstable operation of the monitor power supply

It also happens that the monitor screen periodically goes blank for 1-2 seconds, and then the image appears as if nothing had happened. This may indicate a problem with the monitor's power supply, which cannot cope with power surges, as well as poor condition of the cable contacts. Less likely reasons for this behavior are malfunctions of the motherboard itself, video card conflict (it is recommended to disable one), RAM problems (rare).

The wrong resolution

The fact that the monitor turns off during the game or just work, sometimes the wrong resolution is to blame. If, using third-party tools, set a resolution that exceeds the capabilities of the monitor, it is very possible to turn off the latter, especially when playing games. A clear sign of an incorrectly selected resolution is the message "Out of range".

In this case, you need to boot into safe mode and lower the resolution to installed by the system default.

Outcome

As you can see, it is quite difficult to unequivocally answer the question of why the computer monitor screen goes blank during operation. The reasons for this may be a wagon and a small cart, to find the true one for an ordinary user who does not have the appropriate knowledge, the task is often difficult. Checking the system settings, contacts and the load on the components is, perhaps, within the power of everyone, as for the diagnosis and repair of equipment, it is better to entrust this matter to specialists from the service center.

If the screen turns off intermittently while using the computer, then the cause of this problem does not always lie with the display itself. It can be related to the video card, connection cable, RAM operation, etc. There are many reasons, and this article is devoted to the main ones.

Always-on display problems are among the most difficult. Diagnose and identify the cause at home ordinary user very problematic. Such violations are associated either with hardware or with software malfunctions. The former, as a rule, require contacting a service center, and the latter can be learned by studying this article.

Reason 1: Monitor failure

If the monitor turns off while the system unit is running, then problems with the main output device cannot be ruled out. Most monitors have protection that is triggered automatically when overheating occurs. But standard means device temperature cannot be checked. Therefore, here we can only advise you to check it by touch. If the display case is too hot, place it away from the wall or somewhere with better air circulation.

Excessive humidity is one of the reasons why the display turns off intermittently. Move the monitor to a room where there is no high humidity and let it stand for a while. The monitor should not be connected to the network. And if corrosion has not yet had time to form, then after the evaporation of all moisture, the device should return to normal functioning.

Disconnect the output device from the system unit. On the screen, you should see an inscription like “No signal” or “No connection”. If there is no such message, then you need to contact the service center.

To remove the monitor from the circle of potential causes of the problem, you just need to connect another output device to a stationary PC or laptop. If the image is still missing, then the fault lies with the video card or cable.

Reason 2: Cable defect

The most common reason for an output device to turn off intermittently is a damaged cable. The most commonly used connectors for screen output are DVI, HDMI. But the VGA format is still found. Make sure that the inserted cable is held securely and twisted on both sides (DVI).

• First you need to try connecting the display to another computer using the existing cable. If there is no change, just replace the cable.
• If changing the cable does not solve the problem, then the problem is with the monitor itself.
• If the problem goes away after connecting to another computer, then the problem is neither with the display nor with the cable. In this case, the cause should be sought in the depths of the system unit.

Reason 3: Video card failure

Another logical reason for constantly turning off the monitor screen can be hardware failure graphics adapter. Such cases are characterized by the following:

For information on what to do in such cases, read the link below:

Reason 4: Video card overheating

In all modern PCs (including laptops), motherboards have two graphics adapters at once: internal and external. In settings BIOS by default, preference is given to the video card that is considered more productive (usually discrete). Therefore, it is necessary to monitor the temperature of the external graphics module.

In most cases, the normal operating temperature for a graphics adapter is one that does not exceed 60 degrees Celsius. But on powerful video cards, this is almost impossible to achieve. The maximum peak (100% load) is usually set at 85 degrees. For individual GPUs, the peak maximum reaches 95 degrees.

For almost all existing GPUs, the maximum allowed upper limit is 105 degrees. After that, the graphics module of the board reduces the frequency for cooling purposes. But such a measure may not work and then the PC restarts.

The first step is to make sure that the video card is not being cooled properly. For this, there are, for example, software temperature monitoring. Let's consider two of them.

Method 1: GPU-Z

Method 2: Speccy

Consider the main reasons leading to insufficient cooling of the graphics adapter.

Dust

If PC for a long time not cleaned from dust, then it's time to start it. There is a possibility that dust inside the system unit or on the video card cooler itself does not allow the latter to cool normally. Dirt and dust on the card's cooler itself can cause it to stop in severe cases. Dust removal does not require special skills: you need to disassemble system unit or open the laptop case, then use a vacuum cleaner or soft brush. It is recommended to carry out such cleaning at least 2 times a year.

Design features of the laptop

Some laptop manufacturers already at the design stage of a certain model do not think through reliable system heat sink. In such cases, laptop computers have, for example, very small grilles on the case, which logically leads to constant overheating of the entire device. Here you should take care to place any stand on the back (or front) under the laptop, lifting it up.

Alternatively, you can use special cooling pads for laptops. They allow you to more intensively drive air through the computer. There are models powered by USB, as well as having their own battery.

Loss of thermal paste properties

Heat transfer between the GPU and the cooler is carried out through a special intermediary - thermal paste (or thermal interface). Over time, the substance loses its properties, which leads to insufficient cooling of the graphics adapter. In this case, the thermal paste must be replaced immediately.

Note: Disassembling the video adapter will void the warranty if it is not covered. Therefore, you should contact the official service center. If a guarantee period already behind, read the link below for a guide to replacing the thermal interface for a graphics card.

Reason 5: Power saving mode

In the Windows operating system of all versions, there is a special service that disables currently unused devices. The purpose of this feature is to save energy. By default, the idle time in the OS is never less than 5 minutes if it is a desktop computer or a laptop. But various erroneous manipulations of the user himself or third party programs can change this time to a shorter one.

Windows 8-10

Windows 7

Windows XP

Reason 6: Video card driver

Incorrect operation of graphics adapter drivers does not often lead to the problems considered. But it is not worth completely excluding the influence of a driver conflict (or lack thereof) on the unstable operation of the display.

1. We boot the computer into "Safe Mode".

Read more: How to enter "Safe Mode" via BIOS, on the Windows 10 , Windows 8 , Windows XP

2. Click "Win" + "R".
3. Next, enter "devmgmt.msc".



4. We find a discrete card (if any) in the section "Video Adapters". There should be no yellow icons with an exclamation mark next to the device name.



5. Using RMB, click on the name of the adapter, then select "Properties".



6. In field "Device Status" normal operation should be specified.



7. Next, go to the tab "Resources" and make sure there are no conflicts.

If the device is displayed with problems (presence of additional icons, resource conflicts, etc.), then the adapter driver should be uninstalled. To do this, do the following:

This method is effective for problems with video adapter drivers. But unfortunately, it does not always bring results. In difficult cases, the user will be required to search for and install the driver manually. For information on how to do this, read the links below.

Tip: First of all, you should find and install the drivers for the motherboard (if you do not have them installed), then all the rest. This is especially true for laptop owners.

Reason 7: RAM

One of the most common reasons for a monitor to turn itself off is a malfunction of the RAM. To detect such problems, there are special tools for checking RAM for errors. Even if a malfunction occurs in a single module, this is enough to periodically turn off the monitor while the PC is running.

RAM modules are unrepairable, so if you find problems in their work, you should purchase new ones.

Method 2: System tool RAM checks

Another way to check the RAM does not require additional software. The OS itself has a special tool.

To run RAM diagnostics using the operating system Windows needs:

Thus, in order to determine the cause of the inoperability of the monitor, the user will need to perform a number of steps. Some of these activities are related to simple and effective diagnosis by exclusion. For example, hardware problems related to the display and cable are so easily identified. Software methods require a sufficiently long time, but they cannot be dispensed with to exclude a malfunction of the RAM.

Question: Monitor turns off (read all similar topics)

Good afternoon, dear forum users. I hope for you because the situation is amazing. As in many similar topics that I read on the forum, my monitor goes blank. It goes out at intervals of several minutes, goes out for a second or two and lights up again, with the sound of turning off the device. On the this moment I reinstalled Windows three times, three different official images. The sistemnik wore for diagnostics - all the rules, he tested himself with everything possible. Reinstalled about 20 versions of video card drivers, which is interesting with some flashing more frequently every minute, with some almost stable every 10-15 minutes. I unplugged the monitor, plugged in a full hd TV and have been working on the TV for 3 days - no glitches, the tests are great. The monitor is faulty, you say. And I said so. I took it to a service center 3 days ago. Today I received an SMS "no defects found" how is it? What is it anyway?

I want to emphasize. The video card is new, it is under warranty for 3 months, as is the power supply. In this configuration, this computer worked stably for 3 months. What can be?

System.
Phenom II X4 965 Black 3400
Asus M4A88t-M
RAM 14 gb
Block GameMax 650 w
ASUS GTX 680 4gb
Windows 7 x64
Monitor Samsung BX2240

Answer: Maybe I'm tired of this topic. In general, I decided to change the monitor, I just need to finish the project. But still I want to understand. There are new facts in the case. I changed the connections from the DVI 1 slot to the DVI 2 slot. After that, the monitor worked fine for 2 days with a small caveat, after starting Windows blinked several times, but then it worked stably. On the 3rd day after the launch of Windows, it went dead, went into sleep / standby mode, 1-2 restarts of the computer helped. In addition, it turned out that in safe mode it works without problems. And also appeared interesting fact. I work as a 3d artist and constantly work with different applications, so in all 3 dimensional applications it behaves normally, and when I open Photoshop, a frequent shutdown / connection sound starts and goes out / lights up often. I tried to connect to a laptop, but I don’t want to work with a laptop (the TV from the laptop works)

Question: The monitor turns off intermittently in games

The problem started yesterday with the fact that strong horizontal ripples appeared in the games, at first I sinned on a DVI cable that might have become unusable, it was at night / postponed for today. Today, after reading the forum, I decided that it was a driver or a system (Windows 7), rolled back and reinstalled the drivers on the video card (radeon 5770), it didn’t help, then I reinstalled Windows, it didn’t help either. I began to fiddle with the cable (stupid, but by changing the plugs in places, the ripples became a little less). I began to suffer with the settings, as a result, both the settings of the video card and the monitor, I did it by default, So in games, on minimum wages and + by default. But now the monitor began to go out, directly in games, and then like an avalanche, and when I altabay or go out on the desktop, then everything becomes normal. The video card does not heat up just like the processor and everything else. My assumptions are either a video card or a power supply (which I strongly doubt). Ask for help from local experts.

Answer: Install another video card or check the monitor on another PC.

Q: Monitor goes blank

Good afternoon! When loading and working, the Samsung sync master 710 monitor goes out. In the off state, the green light is constantly on, turns on again after pressing (off and on) the power button. Sometimes it turns on after mouse movements. Tell me what could be the reason?

Answer: Perhaps, because the monitor is far from new ... thanks.

Question: Monitor turns off and computer freezes

Suddenly, the monitor began to go out and the computer restarted. The computer is mainly used for bookkeeping and surfing the Internet. The computer is not mine, but my parents'.
I thought that the problem was in the power supply, I took a known working PSU from work for the weekend, the problem did not disappear. I started to sin on electricity, I bought a UPS, installed it, it did not help.
The comrade asked to update the computer, bought everything, connected it, set it up. To check, I installed it with my parents, it works without problems, it does not reboot.
Then I changed the motherboard in my parents' computer, the computer began to give out problems with the disk, i.e. bads and all that, took another disk, it didn’t help, the computer stopped rebooting, but a new problem appeared, the monitor goes out and freezes tightly. You can reboot only by power or by long pressing the on / off button. Those. also in nutrition
Thought problems with RAM, put from the computer I assembled for a friend, the same thing.
A computer can work for half an hour, it can work for half a day. The problem is not in the OS either, because it freezes in the same way when working with acronis (I thought about making a disk image and reinstalling the system), I decided to do the image because there are a lot of accounting programs, and if the reinstallation didn’t help, I wanted to roll back so as not to put all this software (client banks, different programs with cryptographers).
Everything is fine in terms of temperature, I checked immediately after freezing, I touched all the boards in the system unit, the temperature is not even high for the hand, the sensors show the temperature of the processor is 23-25 ​​degrees, i.e. generally low...
Help people, I've already broken my whole brain ... in which direction to dig at least.

Answer: Ok thanks, I'll try it and let you know how it goes...

Question: The monitor turns off for 1-2 seconds

Hello
The monitor goes blank for 1-2 seconds. It goes out everywhere: in games, browser, desktop. It happens absolutely by chance, it can go out every 2 hours, or it can not go out for a week. When it turns off, the activities on the computer do not freeze and continue. Now I'm using a DVI cable, but HDMI has the same problem. I checked the monitor on a laptop, it doesn’t seem to go out there, but I checked it for only a week, maybe I was lucky. Maybe someone knows something and something will tell?
msi z77a-g43
i5-3570
nvidia Palit GTX 670
8 GB RAM
bp at 700v
AOC e2460s monitor

Answer: Is there a way to check this non-contact?

Question: The monitor turns off (no signal)

During games or just while surfing the web (much less often), the monitor goes out (there is an inscription: "no signal" on the screen, the light blinks, as if the PC is turned off), only reboot helps. All coolers are spinning, the VGA power diodes are on, the mouse and keyboard are also powered. Sometimes it happens that the nvidia driver just crashes (the video driver stopped responding and was restored).
The sound works, I can chat freely on Skype, t...
The PC was assembled 2 years ago (everything is new, except for the PSU), it worked without interference for a whole year, then it appeared this problem, either from win10, or from a PSU, or from a dead HDD, or from something else.
I replaced the HDD, the problem remained, before replacing the PSU, in addition to the monitor falling, the sound also hung and sometimes the computer did not respond to the reset and start buttons.
TTX:
CPU: intel i7 4820k (36-37 degrees)
mother: asus X79 (31 degrees)
RAM: Corsair Vengeance® Pro Series - 16GB (2 x 8GB) DDR3 DRAM 2400MHz C11 Memory Kit (CMY16GX3M2A2400C11)
SSD(with OC): KINGSTON SH103S3120G
HDD: WDC WD1003FZEX
VGA: Asus Mars 760 (53 idle, 67 max active)
PSU (last): Thermaltake EVO-750AL3CC
Current: CoolerMaster RS850
Monitor: LG Flatron IPS235

Overclocked the CPU and RAM, at a pace. on the CPU at 56 degrees there was no effect on the problem, in FurMark drove VGA, in the stress test 64 degrees at low (15-20) FPS, at MSAAx16 81-82 degrees it was stable at 35-38 fps, without artifacts and monitor drops. So far I have not driven the RAM with memtest, and in general it is hard to believe that everything worked stably for a year and then suddenly failed, without any overheating and physical. impacts.
Recording games increases the chance of the monitor falling. Drivers from the nvidia site crash the monitor more often than recommended for the card from the asus site, but the drivers from the nvidia site do not cause the "video driver stopped responding and has been restored" error.
Before replacing the PSU, the voltage on the CPU sometimes dropped, asus software for the motherboard warned about.
Can an unstable network (weak power surges) in the house affect this? (Like the PSU is protected from this)

Answer: The problem also appeared on another video card, then is it the mother? Disabled input devices on first reboot.

Question: Computer freezes/once a month blue screen of death

Hello. The computer often freezes (about once a week), freezes tightly, neither the mouse nor the keyboard react. The screen does not turn off, the last frame remains on it before freezing (something like a slide).
Still, about once a month, there is a blue screen of death.

report to aida64

Checking the stability of the power supply using AIDA64 and FurMark programs

Tell me what you should pay attention to, what tests should be done, how to treat, etc.?

P.s. The computer has 2 ssds, one has a system, the other has a game that I often play. Wheels are new (a year / one and a half). Maybe they are the problem?

Answer: lucky me for all sorts of problems ..

Problem signature:
Issue Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.2
Language code: 1049

Additional information about this issue:
BCCode: d1
BCP1: 0000000000000000
BCP2: 000000000000000A
BCP3: 0000000000000008
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Read the online privacy statement:

If the online privacy statement is not available, please see the local version:
C:\Windows\system32\ru-RU\erofflps.txt

What is involved in shutting down Windows and restarting?

Question: In games, FPS drops sharply and the monitor goes blank

Good afternoon/evening/night. I was completely desperate, I have been suffering for the 3rd day, I ask for help, suddenly someone has been in a similar situation.

Description of the problem: when you start the game (it doesn’t matter which one, it happens randomly, but with demanding games it’s faster) after a minute (for example, the Dirty Bomb game), the FPS starts to drop sharply and the monitor goes out with a characteristic notification sound. The monitor just goes out, as if the video card or motherboard are losing each other, I suspect that later Windows also turns off, but I'm not sure. It used to be different, yesterday the game was launched for 6 hours in a row, and nothing went out, but in the morning everything happened again immediately after turning on the PC.

I've been suffering for the 3rd day, during this time I managed to: install drivers different versions, completely remove the drivers and put on a clean one, reinstall Windows twice, update the BIOS, comb through a bunch of forums with monotonous answers that did not help (he created the topic for the first time).

At first I thought it was overheating, but then why does the monitor turn off immediately after turning on the game in the morning, after a night of parking, the computer would simply not have time to heat up (I could be wrong of course). I thought about the driver, but I rearranged Windows twice, and installed firewood of different versions, the effect is the same. I thought the video card, my wife has the same vidyuha 1 in 1, put her vidyuhi, the same black screen.

Friends put forward a version of the power supply. But then it’s not clear why he allowed it to work for several hours, then it went out immediately after being turned on in the morning.

Video Card Gainward GeForce GTX 660, motherboard GIGABYTE H67MA-D2H (F8 BIOS)

I really hope for your help. Thanks in advance.

Answer: Throw another power supply

Question: When I call my mobile phone, my computer monitor turns off.

Here is such a mess! For the first time I see such miracles))
The order is this - the mobile is 20 cm (maximum) from the monitor. A call is received on the mobile - the monitor on the computer turns off for 3-5 seconds, then turns on, then the norms.
The farther the phone is from the monitor, the less likely the monitor is to turn off.
Win7 Pro x64
HP Compaq LA2306x Monitor
A small feature - the monitor is connected via KVM Gefen.
Help with advice, please! Where to dig, at least.

Answer: try changing the cable that the monitor is connected to.

Added after 7 minutes
I will confirm by the fact that before receiving an SMS or a call to the phone (usually lies next to the laptop) and the sound is turned on - I notice some "tic-tilik-peak-peak" roughly speaking "a second before"
If it lies on the charge - it's a meter and a half from the laptop - then this is not noticed. here is such a mess.