home > Internet > Program for setting sound 5.1 from external. Sound tuning programs

Program for setting sound 5.1 from external. Sound tuning programs

Hello dear readers. Today's article will be especially useful for music lovers, as I will tell you how to set up surround sound in operating system Windows 7 or 8.

The first thing you will need is to purchase speakers and a good sound card. Let's assume that you already have these two components. Then, be sure to install the drivers for the sound card. You can find out the name of your "zvukovuha" using the program " Everest " or any other similar.

Connection of a 5.1 stereo system to the system unit is carried out in the following outputs:

Orange - subwoofer and center speaker;
Green - front speakers;
Black - rear speakers.

At home, I use a 5.1 stereo system, so I only know how to connect it correctly. About 7.1 you can search on other pages of sites, otherwise I can make a mistake and not explain it to you correctly

By the way, do not forget that surround sound also depends on the location of the speakers in the room. I will give a few examples of how to properly arrange speakers from stereo systems.

Now let's get back to the drivers. Let me remind you that you definitely need to install drivers from your sound card. In addition to this, your stereo system should have included a CD with software. Install it on your computer too. Usually, the software (drivers or utilities) that come with the system are installed without problems on Windows 7 or 8.

If there was no disk, then try looking for software on the official website of the manufacturer of your speakers.

Let's assume that you have everything installed, connected, etc. Now let's go directly to the surround sound setup itself for Windows 7 or 8. Why for both operating systems at once? Yes, because the principle of setting is absolutely identical.

So let's go. Go to menu " Start» and press « Toolbar". Then select the category Equipment and sound", and then click " Sound».

The " Sound", in which you will see the devices connected to your computer for sound output. Make sure the audio device you want to configure is set to "default" .

Now a new dialog box will open " Setup Speaker". In my case, two channels appeared in the list of audio channels: Stereo and 5.1 Surround. In your case it might be 7.1 Surround or some other name. It only depends on the equipment you have connected.

Selects a channel 5.1 Surround. If you set just the value Stereo, then only two columns will “light up” on the image in the window, if 5.1 -Added four additional columns and 7.1 - five additional
speakers.

Then I recommend testing by clicking on the button " test". At the end of testing, click " Next» and go to additional settings surround sound in Windows 7 or 8. I advise you not to change much here, because the operating system adjusts automatically to optimal performance.

At the very end, you will receive a message that the setup was successfully completed. Click the button Finish and you will finish setting up surround sound in Windows 7 or 8.

Using this small instruction, you will be able to do everything yourself, without resorting to calling wizards or special services. In the end, I would also like to recommend that you read the article that was previously published on our website, about one very useful program, with which you can convert the sound in your favorite mp3 tracks in a matter of minutes, .

First of all, after connecting a multi-component speaker system, you need to set correct settings in the operating system of the computer. As you know, this speaker system has three output connectors that are connected to the microphone input, line input and line output. system block. Thus, it is necessary to convert the input jacks to the output signal. Moreover, the change in the functioning of the connectors must be made in such a way that they give out the correct signal for the speaker system, because in the case of using a 5.1 system, the general sound signal is divided into components associated with one or another part of the speaker system.

Open your computer's control panel. Go to the Hardware and Sound section. Next, click on the Manage audio devices". In the window that opens, you will see the device. Highlight this device and click on the "Settings" button. Select 5.1 Surround Sound. The audio signals will now properly distribute between the audio ports.

Software settings

Audio settings provided by the speaker manufacturer's software include volume controls for each speaker, tone controls, equalizer, and surround settings. In the program, you can also choose the type of speaker system, which implies a particular number of speakers. In this section, select "Sound 5.1". The main window of the program displays the location of the speakers in the area of the sound receiver, that is, the listener. Each of the columns can be placed as it stands in real life. By clicking on the icon of a particular column, a volume control appears. Thus, it is possible to adjust the overall sound of the system so that the sound appears evenly distributed in space.

Note that any particular system speaker volume setting can be saved. This is convenient if you often rearrange the room by swapping speakers. After adjusting the volume, check the surround sound quality. For this purpose, there is a button, when pressed, some standard stereo sound is heard. You can also check that all speakers in the system are connected to a common node by double-clicking on each of them in the sound settings program. You will hear the sound from this speaker and will be able to check the match.

Instructions on how to deal with a bunch of wires from a 5.1 audio system and properly connect it to your computer.

What you will need:

actually 5.1 audio system
sound card with 5.1 support
3 cables "red-white tulips - jack 3.5mm"

Step #1:

As you know, 5 and 1 are the number of audio channels through which the sound signal goes. That is why we have, roughly speaking, 6 speakers at our disposal: a subwoofer ( subwoofer- designated SW) - the main giant of our system, a low-frequency speaker for creating bass; two front speakers (they are called FrontLeft (left) and FrontRight (right), and are designated FL and FR (see photo)); two rear (called either RearLeft (left) and RearRight (right), or SurroundLeft / SurroundRight (RL / RR or SL / SR, respectively) and another central column (Center - denoted by CEN).
Knowing all this, you can proceed to the connection process itself ...

Step #2:

Now your task is to connect all these 6 channels (2 fronts, 2 rears and a subwoofer + center) to the connectors of your sound card. It is easy to guess that by connecting 6 PAIRLY combined channels at the output, we should get only 3. And these same 3 outputs should look like this, as shown in the photo ...

Step #3:

That is, the connection process is as follows:
- two “tulips” connected to the front speakers should go to the green sound card slot
- two "tulips" connected to the rear speakers should go (as a rule) to the black sound card socket
- two “tulips” connected to the subwoofer and center should go (as a rule) to the orange jack

ATTENTION! Paired tulips must be inserted exactly into the “Audio Input 5.1” section, because single tulips coming from the speakers themselves are inserted into the “Audio Output” section (sometimes this section is not named in any way)! Only in this way can you achieve true 5.1 surround sound.

Step #4:

Now that all the wires are connected to the right connectors, you just have to go to Control Panel, select the Sound section (or Hardware and Sound first), then Speakers and click the “Setup” button. Here we select the item “Surround Sound 5.1”, click Next and - voila!

Tips and Warnings:

Remember: any multi-channel audio (sound in a movie or multi-channel music) will be distributed to 6 of your speakers ONLY PROVIDED that the recording is designed specifically for such a sound! The rest of the sound on your speakers will sound like a simple stereo.
All the necessary cables should already be included in the speaker kit, but if, for example, there were no "tulips - jacks", you will have to buy them in the store

Call or directly on the site! Our experts will be happy to help you

After buying acoustics with support for 5.1-channel sound mode, I ran into a number of problems. Simply put, 5.1 mode did not work in Windows 10, out of five columns only 2 worked, and even then in compatibility mode. At first I thought it was all Google Chrome(which controls the sound itself), but no, you had to know one feature when setting it up. In continuation detailed instructions how to set up 5.1 sound on windows 10.

First you need to check which sound card is installed on the PC. To do this, go to the "Device Manager" and find the item "Sound, game and video devices" (this can be done by right-clicking on the "Start" button, "manager" will be the fifth from the top). If the sound card is from any manufacturer other than VIA Audio, skip the next step.

If the sound card is manufactured by VIA Audio, then before setting up it is necessary to install the drivers of the version: "VIA HD Audio v 11.11.00" (you can download it from the link). However, the VIA programmers messed up something and prescribed the wrong one to the built-in mixer, so after downloading the archive with the drivers, we simply unpack it into any folder. After you need to go to the "Device Manager", then in the "Properties" of the built-in sound card, find the "Driver" tab and click on the "update driver" button. Then "Search for drivers on this computer". Then select the folder with the unpacked drivers from VIA. After successful installation, restart your PC.

To set up 5.1 sound on Windows, you need to go to the "Playback Devices" tab (right-click on the volume icon in the Windows tray). Next, select the speakers we need and click on the "Settings" button in the lower left corner. Next, and this is very important, you need to select the 7.1 sound mode !, then click "next" and uncheck the "side pair" of speakers. Then just click "next-next" and exit the settings window. 5.1 sound activated, congratulations.

You also need to set the virtual surround mode so that when you play back files stereo sound not 2 speakers worked, but all 5. To do this, go to the "Properties" section (button in the lower right corner). There is a tab "Enhancements", where there is a list of different modes, we are interested in the "Enable Speaker Fill" mode - check the box opposite. This completes the sound setup.

Today I will teach you how to connect 5.1 audio systems to devices without multi-channel audio support. Anyone.

So, imagine the situation: you already have a good multi-channel audio system. We emphasize - analog, classic connectors are used as inputs RCA (tulip). At the same time, as a result of upgrading device gadgets with suitable interfaces, the system cannot be used.

How to connect such 5.1-channel speakers to devices with HDMI/Toslink digital outputs, popular USB or use a stereo output? Or how to convert multi-channel digital audio signal to multi-channel analog?

Real and "virtual" multi-channel audio

A true multi-channel audio outputs the voice to the center channel, effects and music to the rear and front speakers. Or - in accordance with the distribution during recording (in some standards of multi-channel sound).

"Virtual" multi-channel audio is distributed according to the spectral response of the reproduced sound. Software and hardware decompose the signal into components according to predetermined algorithms, and distribute sounds around the listening point, creating surround sound.

Method 1. We spare no expense for high-quality sound

The easiest way is to buy a multi-channel receiver according to your preferences and needs. The simplest, most effective. And the most omnivorous.

The purchase will give you a variety of input / output interfaces for video and audio signals, be able to decode files on your own and become the center of your home entertainment system. You can always choose a model with the required number of suitable inputs - and RCA in receivers is the liveliest of all.

Modern receivers support improved sound distribution algorithms, including Dolby Atmos, which can distribute any number of tracks to any number of speakers, taking into account the acoustic properties of the room.

The disadvantage of the solution is the cost. It starts from 10 thousand rubles for a used one and from 30 thousand for a receiver with Dolby Atmos support.

In addition, the receivers have impressive dimensions. Well, if the place and the interior allow. And if not?

Method 2. (Digital) Optical -> Multichannel Analog

For the sake of this, the article was started. I often get asked questions like: “How do I connect my home theater to a new TV? It has no analog audio outputs!”.

Mine only has a two-channel mini-jack and an optical Toslink. For a while before buying new acoustics, I connected the old 5.1 kit using such a Chinese converter.

A rather primitive digital-to-analog converter is hidden inside the device and DSP processor- a microcircuit responsible for mixing, equalizing and effects.

The application is very simple - connect to analog RCA outputs acoustic system, on the other hand, we feed an audio signal through a coaxial or optical connector and external power from the supplied power supply.

If the signal corresponds to the number of connected acoustic channels, it passes without mixing and processing. As it is.

That is, if the film 5.1 channel audio track, and we use the appropriate audio system - the sound quality will be the same as the original.

If a two-channel track is fed to it, then the signal is converted using a "virtual" mixing in the processor, and is distributed to all speakers.

Of course, this is very different from real 5.1-channel sound, but it still sounds nicer than regular stereo. Unless, of course, we are talking about films.

So you can connect acoustics and to other devices- for example, through the usual headphone output of a laptop, tablet or player.

But the output will only be virtual 5.1-channel sound, even if the original track is multi-channel. Nothing else can be obtained from the stereo connector.

If necessary, the converter allows you to play any incoming audio signal in two-channel. Suitable for standard music systems systems 2.1, as well as in cases where the DSP converter does not play the track correctly.

Method 3. HDMI -> Multichannel Analog

The option using HDMI is more promising, since this interface is used much more often in modern gadgets.

To transmit a multi-channel audio track, the jack on the audio source must support the HDMI Arc protocol. AT otherwise, a regular stereo signal will be broadcast, which will be converted to "virtual" 5.1 by software.

If HDMI supports this function, you can purchase such a converter. This box also supports the through transmission of a composite signal: by connecting a source via HDMI, you can separately output sound to an audio system via coaxial, optical or analog connectors, while running the video sequence on a projector or TV.

Method 4. USB -> Multichannel Analog

Most of the Chinese “multi-channel USB audio cards” offered on the Internet are rather primitive tricks that produce processed stereo. Save will not work.

Another thing is external audio cards. Some of them are capable of producing multi-channel sound, and are suitable for connecting to tablets, laptops, desktop computers.

Unfortunately, even Smart TV, not to mention most devices with proprietary firmware (receivers, media players) will not be able to recognize it as an audio device. Therefore, Creative Sound Blaster Omni Surround 5.1 , Creative X-Fi Surround 5.1 Pro or ST Lab M-330 USB is suitable only as computer accessories, or in the case of separate audio and video streaming from a computer. And this is a completely different story.