Samsung scx 5637fr firmware. Estimated prices for services
Printer firmware (firmware)
is the setting software printer with a fixed code that resets the counter of printed pages and prevents the printer from blocking.
Crypto protection (in other words, protection against refueling) installed in modern Samsung and Xerox devices counts down the specified value by the formatter program code (shown in the picture), the number of pages printed, after which the printer is blocked and until you install a new cartridge or flash your printer, it will not work. The firmware of the device is done without opening and other actions aimed at violating the integrity, the printer is entered into the service mode, after which the "FIX" is uploaded via USB.
On the issue manufacturer's warranty. If you are worried that in the event of a printer breakdown you will not be able to contact the warranty workshop, we want to reassure you, let's say your paper pickup roller is broken, you are going to carry the printer or MFP to the service, you can return firmware
firmware for the period of repair in the warranty workshop of the manufacturer or seller. Many of our customers turn to the warranty service and save a lot on refilling cartridges. Let's try to calculate the savings on the example of one printer... well, for example Samsung ML-1660. Now many are wondering "What is printer firmware?".
An average-sized office buys a new cartridge (2240 rubles) about once a month. Refilling the cartridge (350 rubles) is also required approximately once a month. The printer will last approximately 4 years or 48 months.
2240 rub. x 48 months = 107520 rub. This is an approximate cost for the purchase of cartridges for 4 years (WOW!!!..........)
350 rub. cartridge refill x 48 months =16800 rub. refueling expense for 4 years + 1000 rubles. (firmware) = 17800 rubles.
Thus, an exemplary saving for 4 years will be89720 rubles, (it's over, this is a rough calculation, during this time you will have to buy several cartridges since the physical resource is limited) and this is on 1 printer, and now think, do office equipment manufacturers not want to lose that kind of money from users of their printers and MFPs? Of course, Samsung and Xerox are against refilling cartridges in any form, the fight against refillers continues until the economy wins, we'll see what happens next.
Our services:
Estimated prices for services
Name of works
b/w f. A4
up to 16 ppm
b/w f. A3
up to 16 ppm
b/w f. A3
16-24 ppm
b/w f. A3
25 - 39 ppmb/w f. A3
40-59 ppm
Departure of an engineer within the Moscow Ring Road 1000 1000 1000 1000 1000 Departure of an engineer outside the Moscow Ring Road according to the agreements according to the agreements according to the agreements according to the agreements according to the agreements Diagnostics (paid in case of refusal to repair) 300 360 500 700 1000 Prevention 850 1020 1100 1450 1850 Resetting error codes 200 240 200 250 300 Replacing Paper Feed/Original Parts 750 900 950 1100 1200 Paper/Original Feed Unit Repair 850 1020 1000 1200 1300 Replacing Paper Transport Parts 700 840 800 900 1000 Paper transport unit repair 800 960 900 1000 1100 Replacing the drum unit and squeegee 800 960 1100 1300 1600 Replacing the Teflon Roll 600 720 850 950 1050 Tefl bearing replacement shaft 300 360 350 400 450 Replacing the rubber shaft 650 780 700 950 1050 Replacing rubber shaft bearings 300 360 400 400 450 Felt roller replacement 400 480 450 450 500 Thermal film replacement 750 900 950 1200 1400 Fuser Replacement 750 900 950 1200 1400 Coronator/Charge Roller Repair 400 480 500 600 800 Change of developer 500 600 550 600 700 Removing the electronic component a (boards) 250 300 300 500 650 Repair of electronic component a (boards) 800 960 1000 1200 1400 Removing the Drive Assembly 200 240 450 500 700 Drive Unit Repair 750 900 1000 1200 1500 Repair of mechanical components 700 840 900 1000 1300 Function block replacement 700 840 900 1100 1300 Scanner Assembly Repair 800 960 1000 1200 1300 Adjustment-calibration of the scanner assembly 600 720 800 900 1100
MFP Samsung SCX-5637FR, which uses Laser B/W printing technology with a maximum paper size of A4, a print resolution of 1200x1200 dpi and a print speed of up to 35 ppm. pages per minute, its use in small and medium-sized companies, at home, given the small amount of printing, has proven itself well in terms of quality and the possibility of refilling cartridges.
The starter cartridge is designed for 600-700 pages (this is a starter - trial cartridge) during the production of which the MFP Samsung SCX-5637FR indicates that the toner cartridge is low and you need to buy and install a new one. But here there is a choice - buy a new cartridge or refill an empty one. If you choose the second option, a certain problem appears, namely: a microcircuit (chip) is built into the cartridges for this printer, it transmits information about the remaining toner in the cartridge hopper to the machine. And if you are refilling a cartridge, it is not enough to cover it with toner, you need to remove crypto protection from the chip (block the count of printed pages).
Here again, there are two options for solving the problem - change the chip in the cartridge or the printer firmware (software change) in the printer. Replacing the chip is an expensive pleasure, since the chip has to be changed every time the cartridges are refilled, this is the main disadvantage of the replacement. The second one is much more profitable and less problematic than the constant replacement of the chip - the Samsung SCX-5637FR MFP is flashed once and for all.
The firmware of the Samsung SCX-5637FR MFP is performed both in our workshop (1-2 hours in time) and in the client's office. The customer must have a computer (laptop) with operating system Windows and an Internet connection.
Fix Firmware Samsung SCX-5637FR
Price - 80 UAH. \ 200 rub. \ 3 USD
Model |
Firmware version |
Price |
V2.00.01.05 |
80 UAH \ 200 rub. \ 3USD |
To order FIX firmware SCX-5637FR specify the required information:
MFP model (See the sticker on the back panel)
The firmware version of the MFP (see the Firmware Version report line)
Cartridge chip CRUM number (see report line Serial No: CRUM-)
Printer serial number (see the Machine Serial Number report line)
Printing a Samsung Report SCX-5637FR
Configuration report (Configuration Report) - press the [Menu] button, the inscription (System Setup) / (System Setup) appears, press the [OK] button. Use the left-right buttons to find ( Reports ) / ( Report ) , press [ OK] . Use the left-right buttons to find ( Configuration) / ( Configuration ), press [ OK] . Report printing in progress Configuration Report.
Consumables report (Supplies Information) - press the button[Menu] , the inscription appears { System Setup) / ( System Setup ) , press the button[ OK ] . Use the left and right buttons to find( Reports ) / ( Report ) , press [ OK ] . Use the left-right buttons to find ( Supplies Info) / ( Supplies Info ), press [ OK ] . Report printing in progress Supplies Information (Information about consumables) .
If the MFP is locked and refuses to print reports from the regular menu, printing is possible from the service menu. To enter the service menu (TECH MENU) sequentially, press: [ Menu ] [ # ] [ 1 ] [ 9 ] [ 3 ] [ 4 ] (everything must be done without delay). Locate the ( Report ) section, select ( Configuration ) or ( Supplies Info ). The corresponding report will be printed.
To view the firmware version on the MFP display
Sequentially press the buttons on the printer panel: [#] [#]
Sample Configuration Report Samsung SCX-5637FR
Sample Report Supplies Information Samsung SCX-5637FR
Firmware instructions Samsung SCX-5637FR
The letter with the firmware comes with an archive containing two files (the firmware itself FIX_NU_xxxxxxxxxxx_SCX5637FR_V2.00.01.xx.hd and usbprns2.exe)
1. Connect the printer to the computer, wait for the device to be ready (it is not necessary to install the driver for the printer)
2. Unpack the archive with the firmware
3. Move the firmware file with the mouse FIX_NU_xxxxxxxxxxx_SCX5637FR_V2.00.01.xx.hd on usbprns2.exe
A black window with running dots will appear and close after a few seconds. After that, the device will start flashing
Wait for the printer or MFP to reboot (Caution: Do not turn off the power until the machine has rebooted.)
4. After the reboot, glue or remove the chip on the cartridge! The toner level will show 100%.
Entering forced download mode Samsung firmware SCX-5637FR
With the MFP turned off, press and hold the button. Turn the MFP on with the button, release the button, and quickly press the button again. Upon successful entry into forced mode, the message on the display of the MFP ( Download Mode. Press Stop Key ) will change to the message ( Wait Image ). In this mode, download the firmware in the usual way(by dragging.hd onto usblist2.exe)
We will be glad for your comment left after the printer firmware
TO ORDER THE FIRMWARE YOU NEED TO KNOW:
Firmware price $2.9V2.00.01.44 19.9$ |
Firmware update MFP SCX-5637FR possibly predominantly fromFORCED FIRMWARE MODE!
TO VIEW THE FIRMWARE VERSION ON THE DISPLAY MFP
- push: menu,#, 1, 9, 3, #
PRINT SAMSUNG REPORT SCX-5637FR
ATTENTION!Report printing is possible if the printer is not blocked! To unlock it, you need to replace the chip in the cartridge with an original working one.
From the menu:
- pressing MENU, find: SETUP SIST. /SYSTEM SETUP
- press OK- buttons UP DOWN find: REPORTS
- press OK and choose: CONFIGURATION or SUPPLIES INFORMATION / SUPPLIES INFO and press OK
From the service menu:
- Login REPORT
- select item CONFIGURATION or SUPPLIES INFO. The corresponding report will be printed.
Entering the service menu (TECH MENU)
- push: menu,#, 9, 3, 4
SAMPLE REPORTCONFIGURATIONREPORT SAMSUNG SCX-5637FR
SAMPLE SUPPLIES INFORMATION REPORT SAMSUNG SCX-5637FR
ENTER FORCED FIRMWARE MODE SCX-5637FR
- With the MFP turned off, press and hold the button STOP
- Turn on the MFP with a button POWER, release the button STOP and quickly press the button again STOP
Upon successful entry into forced mode, the message on the display of the MFP DOWNLOAD MODE. PRESS STOP KEY will be replaced by the message WAIT IMAGE.
PRINTER FIRMWARE:
- The printer is connected to a computer or laptop and turned on.
- it is better to install the printer driver, if not to install, then you need to cancel the "Found New Hardware Wizard".
- all disabled USB devices from a computer, with the exception of a printer being stitched (it is advisable to use a PS / 2 mouse and keyboard).
- drag the resulting firmware file with the mouse cursor ( .HD file) per program usbprns2.exe .
- a DOS window will appear on the display of the computer (laptop) for several seconds, indicating data transfer to the printer.
- the printer display will show the firmware process in the form of a change in indication (ATTENTION!!! AT THIS MOMENT IT IS UNACCEPTABLE TO DISCONNECT THE PRINTER FROM THE 220V NETWORK!!! This will lead to printer failure, repair is not always possible and very laborious).
- the printer will automatically reboot.
- we seal, for example, with adhesive tape the chips of the cartridges or take them out.
- the firmware is over, the device is ready for refueling and further operation.
- leaving feedback for people.
Version V2.00.01.44
Firmware for printers SCX-5637FR
Firmware samsung printer SCX-5637FR
To order firmware, the following information is required:
one). Exact printer model (as written on the printer)
2). Printer firmware version (in the Configuration Report, see Firmware Version, example V2.00.01.38)
3). Printer serial number (on the Configuration Report, see Machine Serial Number, 15 digits)
four). CRUM chip number of the black cartridge (on the Supplies Information Report, see Serial No: CRUM, 11 digits).
How to print a Samsung SCX 5637FR report
To find out serial number and firmware version. Press the menu button 3 times, "system setting" will appear, press OK. Use the left - right buttons to find the word "Reports", press OK, Use the left - right buttons to find the word "Configuration", press OK, confirm printing. Prints 2 sheets - "Configuration Report"
To find out the CRUM number. Press the menu button 3 times, "system setting" will appear, press OK. Use the left-right buttons to find the word "Reports", press OK, Use the left-right buttons to find the word (Supplies Information Report), press OK, confirm printing. Prints 1 sheet - (Supplies Information Report).
If the printer is locked, the report will not print.
Samsung SCX 5637FR printer firmware manual
The printer has a forced firmware update mode.
To do this, turn on the printer with the stop button pressed, after 2-4 seconds, release the stop button, and press the stop button again.
I warn you: Flash with a chip in the cartridge!
- RUN BATCH FILE download_1.bat
- Wait for the reboot and turn on the printer in forced mode.
- STICK OR REMOVE THE CHIP FROM THE CARTRIDGE.
Wait until the printer reboots, then remove the cartridge from the printer and remove the chip or seal it with tape. insert the cartridge, install the paper in the sheet tray five, the indicator should turn green.
It's important to know!
After you flash the printer, you need to remove the chip from the cartridge and keep the chip just in case (the chip from the cartridge is the chip key). In all future cartridges, when installing, remove the chip or tape the contacts, I mean the cartridges that you will use in the future in the printer! the chip from the cartridge must be removed or sealed. If it happened that another cartridge with a chip was inserted by mistake, then the device will be blocked 100%, so for this case it is worth saving your chip - the key with which the device can be unlocked.
Thanks, we look forward to your orders.
Find out information about the printer if the printer does not print a report (CRUM number, Firmware version).