Iphone hung on a string how much does it cost to repair. On the iPhone screen, the cord and iTunes icon what to do
The army of smartphone fans is increasing day by day, the more devices are used every day, the more problems arise with them. In today's article, we will analyze the situation when an iPhone (of any model) asks to connect to iTunes and does not turn on.
The problem is frequent and well known to servicemen, not fixing it takes about half an hour of work and 1500-2000 rubles of money. In order not to waste the family budget, we will try to turn on the iPhone on our own, at home.
The reasons
There are many reasons, it is difficult to systematize them, but there are several popular ones:
- The firmware flies - it is because of this that the iPhone 5, 6, 7 models do not turn on, iTunes and the cord are on. How to reflash the device will be considered in the next section.
- A hardware error, as a result of which some system files were deleted or corrupted, again, flashing will help. Masters call it "iPhone hung on a string."
- Error may occur after falling on a hard surface
- Water ingress into the device.
What to do if the iPhone seems to be loading, but does not turn on, gives out a "lace" and asks to connect to itunes? Consider the options for solving the problem below.
Solution
To turn on a broken iPhone, follow the steps clearly according to the instructions. If you don’t understand something, at the end of the article there will be a video instruction on how to turn on an iPhone of any model through the official itunes software if it does not turn on. The instruction is applicable to all models Apple smartphones, 4, 5, 5S, 6, 6plus, 7, 7plus.
- Downloading from the official site Apple program called iTunes (link).
- Install iTunes and download the firmware for your iPhone model.
- We turn off the iPhone and connect it to the computer using the standard cable from the kit (you can replace it with a good copy).
- For 5 seconds, hold down the "HOME" and "POWER" buttons together, wait about 10 seconds.
- After 10 seconds, release "POWER" (aka blocking), but keep "HOME" pressed!
- After a while, iTunes will display a message about DFU mode, now we proceed to restore the firmware.
- In iTunes, find the "Restore" button and hold down "Shift" and press it.
- In the window that appears, select the previously downloaded file with the .ipsw extension, confirm the selection.
- The process of restoring the firmware has begun, now we are waiting for completion.
It must be remembered that when flashing, all data will be erased. If you don't have a backup or if you've stored all your photos on a dead device without using iCloud, it's impossible to restore them. In this case, you should immediately contact authorized service centers, they will help you, but they will ask for good money for the work.
Possible difficulties
If errors occur during the flashing process, for example, a warning appears with error number 9, then the situation is much worse. Most likely, an important microcircuit inside the phone is damaged, it is unlikely that you can fix it yourself. In this case, you will have to contact the repairmen, since it is not realistic to solder the microcircuit without special equipment. Although our craftsmen have learned how to do this, I’ll leave a video about soldering the microcircuit with my own hands, suddenly it will come in handy for someone.
It happens that other types of problems arise when the iPhone does not turn on, the daisy is spinning on the screen and nothing happens. Most likely you will have to reflash the device, but first we will try to do a hard reset, it will suddenly help. Do not be afraid, there is nothing complicated and terrible, you will not even lose data, as if you still decide to reflash your iPhone.
Instructions on how to hard reset if the iPhone does not turn on, the iTunes icon and cable appear on the screen
- Press the lock button and the home button
- We wait about 5-10 seconds
- There is a chance that phone glitches will disappear
- If it does not help, look at the previous section, and repeat everything according to the instructions.
conclusions
After several attempts, the smartphone did not come to life? In this case optimal solution will turn to experienced specialists, although this will not be free, you will protect yourself from the risk of completely “bricking” an expensive device. What to do when the iPhone 5s does not turn on and in an ultimatum form requires you to connect to iTunes, you now know, carefully read and watch the video, in 90% of cases this will solve the problem.
Video instruction
After unsuccessful flashing on the device screen, you may encounter such a problem as the iTunes icon and USB cable. If you updated via iTunes, then you will see in it the number of the error that occurred during the firmware update. Below are some kinds of errors that may appear in iTunes.
Deciphering iTunes errors in which the phone shows “connect to iTunes”
Error 1
The reasons :
You are trying to downgrade a firmware that is not supported by your device or iTunes.
Solution :
Make sure you are using the correct firmware for your phone, and use the appropriate iTunes for the firmware you want to upgrade to.
Mistake 2
The reasons :
The problem with ASR, usually occurs with custom firmware with hack and unlock in which a bad ASR Patch is used (Sn0wBreeze under 1.7 had this problem)
Solution:
Use a different firmware.
Mistake 3
The reasons :
The problem is most likely in the modem part.
Solution:
It is necessary to carry out diagnostics in the Service Center
Error 4
The reasons :
iTunes cannot connect to Apple service servers
Solution:
Most likely you need to check the connection to the Apple servers. It is also worth paying attention to host file, in Windows folder and possibly comment out the “#” lines with different IP addresses.
Error 5.6
The reasons :
The firmware cannot be installed, either because the boot logos are damaged, or because the device is entered in the wrong service mode
Solution:
A very rare error, you can avoid it by restarting the device in DFU mode and downloading the firmware via iTunes by clicking the Restore iPhone/iPad button
Error 8
The reasons :
The difference in the firmware for the device, also the error itself rarely “pops up”, in most cases error 3194 appears
Solution:
Try to substitute a different version of the firmware, as most likely previous firmware no longer signed
Error 9
The reasons:
Kernel Panic - kernel error during flashing, analogous to BSOD ( blue screen death) on Windows.
Solution:
It also occurs with custom firmware. It is worth rebuilding them or using others.
Error 10
The reasons:
There is no LLB (Low Level Bootloader) in the firmware, without it the system becomes impossible to boot.
Solution:
Do not use custom firmware without modem upgrade from older versions of PWNage Tools and Sn0wBreeze.
Error 11
The reasons:
The firmware lacks BBFW.
Solution:
Use another, or add the missing file to IPSW through the archiver.
Error 13
The reasons :
There is a problem with the USB cable or connector on the device itself, and the error also appears when you try to install the beta version of ios
Solution:
Look for damage in the bottom dock of your gadget, as well as on the cable itself with which you are trying to flash the device. If you are trying to upgrade to a beta version, try to use a different one or if possible use OS X to install such firmware.
Error 14
The reasons:
Problem with firmware after jailbreak, try to restore with custom firmware If it does not help, the problem is in USB.
Solution:
Recovery from custom firmware, or change port\computer
Error 17
The reasons:
You are trying to “Update” a custom to another custom.
Solution:
You need to “Restore”, preferably from DFU or Recovery.
Error 20
The reasons:
The device was initially put into Recovery Mode and failed to go into DFU
Solution:
It is necessary from the very beginning to start the device in DFU mode and re-update the device
Error 23
The reasons:
Usually a hardware error. It is also expressed by the fact that the phone cannot find out the IMEI or MAC address.
Solution:
Take it to a service center, or if you are satisfied with an iPod without WiFi and BlueTooth, then it will be flashed using iTunes 9.0.2 and these instructions
Error 26
The reasons:
NOR failed version checking.
Solution:
Change the firmware file.
Error 28
The reasons:
Problem with device memory.
Error 27 and 29
The reasons:
Cyclic error when restoring in iTunes 8-9.1
Solution:
Use the latest iTunes or any version of iTunes for Mac.
Error 31
The reasons:
The device cannot exit DFU mode
Solution:
Most likely there is a hardware problem with the device itself, for this you need to diagnose the gadget
Error 37
The reasons:
LLB in the firmware has been replaced with an analogue from another device model.
Solution:
Rebuild custom or use another one.
Error 39, 40 and 10054
The reasons:
Problem with access to activation and signing servers. Also, with error 40, there may be a problem with Nand memory, processor or RAM.
Solution:
Try disabling the firewall and antivirus and flash again. If the error persists, then you need to take the device to the Service Center for diagnostics, since most likely the problem is in the hardware.
Error 10**
The reasons:
Occurs when downgrade / upgrade to a baseband different from what the firmware has. This doesn't mean the restore failed - it just tells you that the phone's firmware doesn't match the baseband.
Solution:
Use The Frimeware Umbrella to turn on the phone after an error (Kick Device Out of Recovery).
Mistakes 6 and 10
The reasons:
Occurs due to a problem with your firmware - usually if you use the wrong boot/recovery logo.
On firmware 2.0, error #6 may mean that you are not in DFU
Solution:
Flash to a new custom firmware and use the correct boot / recovery logo or even standard ones.
Error 1600 and 1611
The reasons:
Custom firmware is not designed for DFU.
Solution:
Use Recovery Mode
Errors 16**
The reasons:
The system for checking signatures of firmware files is not disabled.
Solution:
It is necessary to jailbreak before installing custom, if you used Spirit, you must also disable signature verification manually. To do this, install the Spirit2PWN package from Cydia.
JailbreakME.com is not suitable for installing custom firmware.
If you are customizing iOS 4.1 and higher from PWNage Tools, then you need PWNed DFU - we do it through RedSn0w or PWNage Tools
Error 1619
The reasons:
iTunes can't get into your iPhone. it is too old to work with your device
Solution:
Update iTunes.
Error 1644
The reasons:
Interruption of the firmware reading session.
Solution:
Do not touch the firmware file while iTunes is restoring your phone, make sure kheubt programs do not manipulate this file.
Error 2005
The reasons:
Error in iPhone responses. As a rule, it is caused by mechanical damage.
Solution:
Check your dock.
Error 3004
The reasons:
Internet connection required for flashing
Solution:
Make sure your computer is connected to the Internet and there is nothing preventing iTunes from using this connection.
Errors 14**
The reasons:
Corrupted firmware file. Or a USB port.
Solution:
– Download the firmware file from another source.
– Replace wire, port, computer.
Mistakes 20**
The reasons:
Data cable or usb port failure
Solution:
Change data cable USB ports, try a different computer if possible.
Errors 3014
The reasons:
Too much for a long time response from Apple activation server
Solution:
It is necessary to restart the computer / laptop, as well as “reboot” the Internet connection
Error (-39)
The reasons:
iTunes cannot download purchased music from iTunes Store
Solution:
1) Install iTunes version 9 or higher.
2) If you are using Web accelerators, turn them off and restart your computer.
Error (-3221)
The reasons:
iTunes cannot contact the iTunes Store due to file lock.
Solution:
Change the permissions and permissions of iTunes and iTunesHelper to unlock their ability to send data to the remote server.
Error (-50)
The reasons:
The error occurs after the timeout of the sent request.
Can be called:
-Brownman
- Firewall
-AD filters
-Antiviruses
Solution:
If you have any of the programs listed above, set them up so that iTunes can contact itunes.apple.com and ax.itunes.apple.com
If an error occurs while loading video content.
Delete the download video cache, it is in
Mac:
~/Music/iTunes/iTunes Music/Downloads
Note: The tilde (~) refers to your Home directory.
Windows Vista:
\Users\username\Music\iTunes\iTunes Music\Downloads\
Windows XP and 2000:
\Documents and Settings\username\My Documents\My Music\iTunes\iTunes Music\Downloads\
Find the downloaded video file, its extension will be TEMP (*.tmp)
Start downloading from the beginning.
Error 9808
The reasons:
iTunes Store Registration Error
Solution:
Start - Control Panel - Internet Options - Advanced and check the items SSL 3.0 and TLS 1.0.
After restart your computer
Error 39
The reasons:
Error when trying to sync photos.
Solution:
Try to create new album in iphoto.
Keep the album blank and only sync iphone with this new album.
This will delete any photos that you have synced to the iphone.
Now put some photos in a new album and sync iphone.
If the sync went well, add a few more photos and sync your iphone.
Keep going through this process until you get the same error.
If you get the same error, then you know that one or more photos in the last batch are causing the error.
Error 13001
The reasons:
Broken iTunes library file
Solution:
Create a new itunes library file - by deleting it and then opening itunes and it will re-create it iTunes Library.itl
Errors 13014, 13136, 13213
The reasons:
Software hole in iTunes
Solution:
Solution 1
Make sure your computer has latest version iTunes.
Solution 2
Close and reopen iTunes. If the problem persists, restart your computer.
Errors -1
The reasons:
Error in the modem part of the device
Solution:
It is necessary to diagnose the device in the Service Center, as given error not solved by the software part of the repair.
Directions to Apple Service on Sumska 82:
If you have any questions. You can contact us - Online consultant or by calling the phone numbers below. We will be glad to help you.
Our address:
Kharkiv, Sumskaya street 82
Schedule:
Monday - Saturday from 10:00 to 20:00
Sunday - from 11:00 to 17:00
Y many iPhone users 7 USB cable and iTunes icon will appear on the screen after updating to iOS 12/iOS 11, usually in this case, it is considered that your device has already entered recovery mode. After a series of "Unknown Errors" it came to a black screen with a cord and an iTunes icon, the service said that the problem was with the board. Or you had an iPhone 7 problem with a black display where a cord and an icon in the form of the iTunes logo appeared, after a forced reboot, the phone does not react to anything at all and does not turn on or charge. This article is about what to do if iPhone 7 is stuck on iTunes cord after iOS updates 12/iOS 11?
Free way to recover with Tenorshare ReiBoot
The free program will solve your problems, iPhone 7 is in recovery mode and stuck on connect to iTunes icon after iOS 12/iOS 11 update, Tenorshare ReiBoot will help you get out of recovery mode, and your device will restart itself after some minutes.
First download and install Tenorshare ReiBoot on your computer. Connect your iPhone/iPad/iPod touch to your computer with a USB cable. Then Tenorshare ReiBoot will recognize your device in recovery mode, click the "Exit Recovery Mode" button. Wait a bit and the device will reboot safely. Do not turn off the device during this process.
Solve Stuck on iTunes Logo via iTunes
The way to get rid of the black screen with the image of the cable and iTunes is to restore to iTunes, but it will erase all the contents, so create backup before using it.
- Download and install iTunes on your computer.
- Open iTunes, connect your device to PC with a USB cable.
- Wait for it to appear on the screen iPhone images with cable connected.
- Click the "Restore" button in iTunes. the device will start working normally again.
Fix operating system with Tenorshare ReiBoot
The usual way is to force a reboot, but after a forced reboot, which is used to exit the normal recovery mode, the iPhone 7 still continues to load a black screen in which we see the cord and iTunes again and again. This situation means that the iPhone 7 got into the so-called recovery loop mode (Recovery Loop). Getting into the Recovery Loop can happen for various reasons, for example, as a result of errors after updating or restoring the iOS 12/iOS 11 firmware. Then you need to fix operating system.
If you see a string appear on the device screen on a black background and the iTunes icon at the top of the screen, it means that on the iPhone in this moment one of two modes is running - this is Recovery Loop or Recovery Mode.
recovery mode is a special recovery mode on any iPhone, designed for emergencies when the smartphone cannot boot up and finds errors in software. If the phone reboots after checking and again shows the cord and the iTunes icon, then the device has switched to the recovery loop, or, as it is otherwise called "Recovery Loop".
To understand what mode your phone is currently in, you just need to restart your smartphone. If after a reboot it works correctly, then this is the normal file recovery mode (Recovery Mode). But, if your device still returns to its previous state after a reboot, then the phone is in the Recovery Loop mode. You can’t get out of it with any buttons, then you can use special programs or take it to a service center so that the masters do it.
How to exit Recovery Loop mode
For this, specialized programs have been developed. These are TinyUmbrella, RecBoot and Redsn0w. All products can be downloaded for free on the official websites. Let's consider each of them in detail.
TinyUmbrella. Connect your iPhone via USB after installing the program. Run her. Put your device into DFU Mode. Once the phone is transferred to this mode, the Fix Recovery tab will become active in the program window. Click it and in the window that appears, confirm the action by clicking the "Yes" button. Within a few minutes, your phone should automatically reboot and return to its previous working state.
redsn0w. Download and install the application from your computer. Connect your iPhone via USB cable and run the program. Click on the Extras tab. In the window that appears, click on the Recovery Fix tab. Next, put your smartphone into DFU Mode. Program in automatic mode detect DFU, and fix any errors. Within a few minutes, the phone will be restored to its previous working state.
recboot. If you can’t restore your iPhone using the above programs, then use the small RecBoot utility. Download the files from the official website and install on your computer. Connect your phone via USB cable and wait for the program to detect the device. Next, click on the Exit Recovery tab. Wait until the device reboots and returns to its previous state.
If you don't know how to put your smartphone into DFU mode, please read the guidelines below carefully. DFU mode on all generations of the iPhone turns on the same way:
You need to connect the iPhone to the computer via a USB cable and hold down the Power and Home buttons at the same time for 10 seconds. Then let go power button while continuing to hold down Home. Hold until the phone sees the computer in DFU mode.
If you are unable to restore the machine using the described software tools, use iTunes. But keep in mind that in this case, all data from the iPhone will be deleted. Connect the device in DFU mode to the computer, open iTunes, wait until the device is detected by the system. Click the Restore tab and Confirm the action, then wait until the end of the procedure. Once the process is complete, your iPhone will restart and work properly. And it will not be possible to remove cracks from the screen, only engineers will help service center. They will also help you and restore your iPhone, exit various recovery modes.
Friends, occurrences USB cord and iTunes icon on the screen iPhone phones, iPad tablets and iPods are quite common. In general, it is generally accepted that if a cord and an icon in the form of the iTunes logo appear on the black display of one of these devices, then this means that Recovery Mode is running. But not everyone knows that the cable and iTunes, in addition to Recovery Mode, can mean Recovery Loop, which is different from recovery mode.
In order for you to be able to make an accurate diagnosis, to determine the mode in which your iPhone (or other device) is located, displaying a USB cable and iTunes, we will describe the results of our research acquired as a result of the operation of these mobile Apple devices. And maybe even our meager knowledge will help someone solve their problem and restore the phone or tablet.
Recovery mode - normal
To normal mode iPhone recovery or iPad is entered using simple actions, the sequence of these actions is described here - "". To exit the usual Recovery Mode, we simply left the iPhone for a while, it rebooted itself and exited the recovery mode. For an immediate exit from recovery mode (what would not wait) we simply force . It turns out that, unlike the others, it is quite easy to exit the normal recovery mode by rebooting.
Recovery Loop Mode - Obedient
There are cases that after a forced reboot, which is used to exit the normal recovery mode, the iPhone still continues to load a black screen on which we see the cord and iTunes again and again. This situation means that the iPhone is in the so-called Recovery Loop mode. A phone or tablet in this mode very often drives iTunes. Getting into the Recovery Loop can occur for various reasons, for example, as a result of or restoring the iOS firmware. A recovery loop can occur as a result of a software, hardware or domestic failure (for example, accidentally pulled out the cable), once we ourselveswhen we tried to downgrade the iOS firmware version from 7 to 6th.
Why did we add the word "Obediant" in the subtitle? Yes, because you can still exit the obedient recovery loop and return the iPhone to a working state without losing information, for this we used, some users with TinyUmbrella had difficulties, and we found a more convenient way to exit Recovery Loop using the program. There are other programs for getting out of the loop - iReb and RecBoot.
Recovery loop mode - not docile
If your iPhone or iPad gets into a naughty Recovery Loop, then, as a rule, not only a forced reboot is powerless, but the redsn0w, iReb, TinyUmbrella and RecBoot programs also cannot get the iPhone out of the recovery loop. As a result of applying the programs listed above, the iPhone continues to show after rebooting USB cable and the iTunes logo. In this case, we did not succeed in avoiding the loss of information stored in the iPhone, but it’s good if you did too earlier.
If you caught a naughty recovery loop, then all that remains is to connect the iPhone to iTuens and try to flash it. Sometimes it is not possible to flash the phone in this mode, then they try to flash it again. As a result iPhone firmware erases all information, and we made earlier. It happens that after flashing an iPhone or iPad, they are asked to enter someone's Apple ID and password, but that's a completely different story.
