Changing the splash screen. How to change the Windows Welcome screen

In the original, "clean" Windows 10 desktop wallpaper looks like just an emblem on a dark blue background. Such a picture will not suit everyone: someone will find it too dark, someone too static, someone simply will not be satisfied with a standard picture, far from even the classic sunny lawn from XP. Then you will need to change the wallpaper. It should also be noted that the wallpaper can only be changed on the activated version of the system.

Step 1. Open "Start" - "Settings".

Step 2 In the window that opens, select the "Background" tab.

Step 3 The screensaver type selection menu will open:

Select the desired splash screen type:

Method two

Learn more about splash screen types

Color

This method will fill the entire screen with a monotone color. Suitable for undemanding users, or if for some reason the user's image library is missing.

After choosing "Color", you just need to choose the color you like from the suggested ones. This method does not consume a lot of system resources, almost does not load the video card and is very well suited for weak computers(meaning the configuration that still "pulls" Windows 10).

Slide show

Allows you to create rotating images from system or your own. Suitable if you are not satisfied with a solid fill or a static photo, and the image library is rich enough.

After selecting this item in the menu, you need to select the folder where the images are located, then set the frequency of changing pictures.

Note! This method loads the video card somewhat more due to the dynamics. Also, frequent image changes tire the eyes and are not recommended for people suffering from or predisposed to epilepsy. It is better to set if the computer is slightly higher than the configuration required for the system, at least according to.

A photo

A static photo that occupies the entire desktop or part of it. Suitable if you just need a better monotone screen saver, but you don't want to use a slide show. There are two ways to set a photo as wallpaper:

Such a background loads slightly more than a solid background, but over time it can get boring. Good if you don't have a lot of images on your computer. In addition, the OS has a good selection of its own wallpapers.

Video - How to change wallpaper in Windows 10

Screensaver

Although it is often mistakenly called a desktop wallpaper, the replacement of which is discussed above, the screen saver itself can be considered a screen saver or screensaver. It appears when work has not been done on the desktop or other non-gaming application for some time. Then the computer goes into saving mode - the monitor goes out or a saving screen saver is displayed on it. If you are not satisfied with the default splash screen, there are several ways to change it:

Where to find screen savers

Screensavers are on the Web in a large assortment. There you can find static, animated screensavers. fans computer games will be able to find something for themselves, more mundane users will pick up something neutral for themselves.

Important! In fact, screen savers are executable files, therefore, with them and under the guise of them, you can bring the virus. To prevent this from happening, check the downloaded files or a special Internet service.

How to install screen savers

Screensavers that have their own installer are installed through it. If it is missing, then the screen saver is placed in the system folder "C:" - "Windows" - "System32".

Will splash screens from previous versions work?

Files, both in Window 10 and in previous versions systems have the same .scr extension, which will allow you to transfer your favorite screensaver that was on the previous system to the new one.

Video - How to change the Windows Welcome screen background

The splash screen is an animated image that occupies the entire perimeter of the monitor on the desktop. Currently, the choice of pictures for screensavers is huge and varied.

In all Windows versions a set of standard screensavers is built in, any of which can always be set according to convenient parameters. It is also possible to use screensavers from other sources, for example, from a disk or from the Internet.

in different operating systems ah, the order of installation or change is somewhat different screen saver. In any case, you first need to make sure that the installation file is on your computer. Default native Windows screensavers are an integral part of the system. Consider how to change the Windows splash screen.

Changing the splash screen in Windows 7

Windows 7 is one of the modern and most common versions of operating systems. How to change the Windows 7 splash screen? To change the screen saver or screen saver, you need to press the right mouse button once on the desktop. In the list that opens, the item "Personalization" is highlighted. A window of the same name should immediately open, at the bottom of which you need to find the "Screensaver" icon. It should be clicked 2 times with the left mouse button.

The Screen Saver Options window opens. Select the desired image from the dropdown list. It is also possible to select the amount of time after which the screen saver will take effect. After setting these data, left-click the "Apply" and "OK" buttons.

There is an option to set advanced options and preview what the splash screen will look like in action. You just need to click "Options" or "View".

The Screen Saver Options window can be opened from the Start menu. Just select the "Control Panel" and "Screen Saver" options.

Changing the splash screen in Windows XP

An excellent answer to the question of how to change the Windows XP splash screen can be considered the exact algorithm of actions.

On the desktop, you need to click on the right mouse button. A list should immediately open in which you need to select the "Properties" option. Then, in the window that opens, click the "Screensaver" tab and set the desired parameters.

There is another option to change the custodian. From the Start menu, select Appearance and Themes and Select Screen Saver.

As you can see, changing the splash screen in Windiws 7 and Windows XP systems is quite simple and will not take you much time.

Greetings to all visitors to my! Each computer user tries to give individuality to his desktop: someone installs new icons for himself, someone changes the theme. But the most basic thing that catches your eye is the screensaver, or background, of the desktop. How to change the splash screen on the desktop Windows desktop we'll talk about in this article.

What is a desktop screensaver for?

The main and only function of the desktop background is decorative. That is, the desktop background is used for beauty. You can set any picture on the screensaver: a photo, an image from the Internet, from a standard set. It is important that you like this picture and not annoy.

There are a huge number of sites on the Internet that host thousands of desktop pictures. Most sites automatically detect your screen resolution and offer pictures exactly the right size. I will not talk about these sites, they can be easily found on request, for example, “download desktop screensaver”.

How to choose a desktop screensaver?

Before proceeding to the story of how to change the screensaver, it is worth describing some rules for choosing a screensaver:

1. Choose a screensaver with a predominance of light colors. On dark screen savers, icons and desktop icons are not visible. You can also install a screensaver and see if it looks good and if you don't like it, then change it to another one.
2. Choose pictures that are close in resolution to your monitor. Very small ones will either be stretched and their quality will not please you, or they will be located in the middle of the desktop, and there will be a black frame around.
3. Don't put very high resolution or large images on your screensaver. Such pictures can significantly worsen the performance of a computer. it will take a very long time to load when starting and switching to the desktop.

How to change the Windows splash screen?

Let's move on to the practical part of the article, where you will finally learn how to change the splash screen. To begin with, I will say that starting from Windows Vista you can specify several screensavers that will change at the frequency you specify, for example, once every 1 hour. So, to change the Windows splash screen, you need to follow these simple steps:

1. Right-click anywhere on the desktop and select context menu « Personalization».

Desktop context menu

1. At the bottom of the window that opens, find " desktop background» and click on it with the left mouse button.

Personalization window

1. Now you can select the location of the desktop screensaver (1) or using the " Review» (2) explicitly indicate its location. Standard screensavers are located in the " Desktop backgroundsWindows". You can upload your pictures to the folder " Images» and through « Review» Specify this folder. Small image icons are located in the center of the window (3). Here you can select several pictures that will periodically change each other. The position of the picture (4) is better to choose the one indicated in the image below. After all the changes, click on the " Save Changes" (5).

Screen saver options window

1. You will see that the splash screen has changed. This is how you can simply change the Windows splash screen.

This concludes my article. Now you know how to change the Windows splash screen. If you still have questions, then write them in the comments.

A screen saver is a moving picture or picture that appears on the computer screen when the mouse or keyboard has not been used for a certain period of time. This tip will show you how to change splash screen in windows 7 to another one or turn it off altogether.

Standard splash screens are located in C:\Windows\System32\ and have the following names:

1. Bubbles.scr
2. Mystify.scr
3. PhotoScreensaver.scr (Photo)
4. Ribbons.scr
5. scrnsave.scr (blank)
6. ssText3d.scr (3D text)

If the screen saver is not working, check the following:

1. Screen saver settings.
2. If you are using photos (pictures), delete all videos from the selected folder.
3. You have downloaded a corrupted file.
4. The splash screen file (.scr) was not installed in the C:\Windows\System32\folder.

To expand the choice, you can download additional screensavers. Download only from trusted resources.

How to change the splash screen in Windows 7 Starter and Basic Home

1. Open the "Control Panel" find and click on the "Display" option.

Change the screen saver in Windows 7 Home Premium, Professional, Ultimate, Enterprise

1. Click "Start" in the search bar, enter "personalization" (as in the picture, without quotes) and click on the input entry from the list found.

2. A window with numerous settings will open in front of you. We are interested in the lower block, where 4 personalization settings are located. Here you can sound scheme, and of course the splash screen.

3. After that, the window “ screen saver options". In the "splash screen" block, select from the proposed splash screen options, then click on the "view" button and you will see how it will be displayed in full screen.

Note: Just press the keyboard key or move the mouse to stop preview.

Some pre-installed Windows 7 screensavers have their own settings that you can open by clicking on the "options" button. Some screensavers may not have customizable options.

For example, if you want make a screensaver from your photos (pictures), then select "photos" from the proposed list of screensavers. Then click the "options" button, where you can adjust the speed of the slide show and select the folder with photos (pictures) by clicking the "browse" button. Specify the folder with the files and click OK. If you want the slide show to be random, then check the box where it says “random order of images” and click save. if you want to improve appearance OS.

5. After you have selected and configured the screen saver, click the "apply" and "ok" buttons.

6. In order to disable the screen saver on Windows 7, select "no" from the list, click "apply" and "ok", as shown in the screenshot below.

How to change the splash screen through the Windows 7 registry

In addition to the methods described above, there are manual method changing the splash screen through the registry.

1. Press the key Windows icon+ R , in type regedit and press Enter.

2. In the registry window, find the section located along the path:

HKEY_CURRENT_USER\Control Panel\Desktop

3. In the Desktop section, find the SCRNSAVE.EXE element, double-click on it with the left button and in the opened window for changing the string parameter in the "value" field, enter the full path to the splash screen and click "ok".

For example C:\ Windows\ system32\ Ribbons.scr

Important! There must be no spaces in the screensaver title name. If they are, be sure to remove them.

If you suddenly did not find the SCRNSAVE.EXE parameter, then create it. Click on the right side of the registry window on an empty space and in the "create" menu, click "string value". Name it SCRNSAVE.EXE and press Enter. Then follow the steps described above (see point 3).

4. To set the time after which the screen saver will be displayed in Windows 7, find the ScreenSaveTimeOut parameter. Open it and set the numerical value in seconds and click "ok". For example, the value 600 is equal to 10 minutes.

If you did not find the ScreenSaveTimeOut parameter, then make it according to the principle of creating the SCRNSAVE.EXE parameter described above.

5. After the done actions, close the registry, wait a while and check the result.

These are the ways you can change splash screen in windows 7. All methods described above use standard OS features without third party programs, and differs from the process, which I recommend that you familiarize yourself with.

Screensaver - a static or animated image that appears through certain time computer inactivity. If you are tired of your current screensaver, this is not a problem. You can change the screensaver on your computer in just a couple of seconds and a few mouse clicks.

Instruction

Call the "Properties: Display" window. To do this, through the Start menu, enter the control panel, in the "Appearance and Themes" section, select the "Select Screen Saver" task or click the "Screen" icon. Or right-click anywhere on the desktop that is free from files and folders, in the drop-down menu, click on the last line "Properties". The appropriate dialog box will open.

In the window that opens, go to the "Screensaver" tab. The top of the window displays the current splash screen, and here you can see what will be on the screen during system inactivity after you change the settings. Use the drop-down list in the "Screen Saver" section to select the screen saver that you like. Click the "View" button to see it in full screen mode. While browsing, do not press any buttons on the keyboard or move the mouse. The item "No" means that instead of a splash screen when the computer is idle, there will be a simple black screen.

To exit the mode full screen mode view, move the mouse slightly. Set the value in the "Interval" field using the "up" and "down" arrows to the right of the field, or enter it using the keyboard. Given value– the number of minutes the computer is idle, after which the selected splash screen will appear on the screen. Click the "Apply" button for the new settings to take effect, close the window by clicking on the OK button or the X button in the upper right corner of the window.

A screen saver can serve not only for beauty, but also to protect your computer. Works this protection as follows: the computer is idle for a specified amount of time, the splash screen appears. To return to working with the computer, in normal mode, just press any key on the keyboard or mouse button. With the data protection mode enabled, actions will not be enough, you will need to enter a password.

To set protection, put a checkmark in the "Password protection" field on the "Screensaver" tab in the "Display Properties" window. Click the "Apply" button, close the window. The password will be the same as the one you use to log in. Windows system. If the login is not password protected, the marker in the "Password Protect" field on the "Screen Saver" tab will do nothing.