How much does it cost to change the screen on an iPad? How much does it cost to change the screen on an iPad? How much does the screen cost on an iPad?

You may need to replace the screen on your iPad in two cases. First: if you have already changed and installed a cheap spare part that is this moment does not satisfy you in terms of quality. The second, and most common option: when your tablet gets serious mechanical damage, incompatible with further use. Perhaps the most common screen injury is the result of a dropped Apple device. Unfortunately, even the most careful tablet owner is not immune from this. Unlike personal computers, iPads are mobile, designed for owners to carry with them so they can use them anywhere, and this increases the risk of falls. Since the modern owner of an iPad is an active person, usually keeping an eye on appearance and physical fitness, diversified and striving to travel as much as possible, then the fate of a traveler, and not always in the most comfortable conditions, is destined for the Apple tablet. At the same time, the protective glass, which protects the screen from moisture and dust and takes a hit when colliding with an aggressive environment, is essentially not a vandal-proof design. It is undoubtedly wear-resistant and perfectly protected from scratches and abrasions. And this is very important, because it is glass that is constantly in contact with our fingers and numerous objects in a bag or backpack, where we are used to carrying an iPad. The protective glass of an Apple tablet is very difficult to scratch, so such damage rarely becomes a reason to scratch it. Replacing the iPad screen is necessary when the protective glass cracks, because this does not occur as a result of friction, but as a result of impact. The fact is that the larger the area of ​​a solid thin object, the more fragile it is, because it is the hardness of the iPad that plays against it when the tablet falls. The same hardness that allows the iPad screen to resist scratches and abrasions makes it vulnerable to cracks and chips and becomes common cause search queries in RuNet from the series, . However, even if such a nuisance happened to you, and the protective glass cracked as a result of a fall, this is not a reason to despair. Of course, the cost of repairs, including the provision of new spare parts and the procedure for replacing the part itself, is not encouraging. But you have the power to change this. The fact is that replacing the screen on an Apple tablet is not such a complicated process as they try to present it on the Internet. Of course, it cannot be said that even a child can cope with it, but a healthy adult is quite capable of carrying out the operation of dismantling the damaged part and installing a new spare part. The main thing is to find a high-quality original replacement part, a set of tools and good instructions with photographs of the process and explanations from experienced repairmen. Make sure you get the above and you can save big on a process like replacing the screen on your iPad.

The iPad mini screen differs from its full-size Apple tablet counterparts only in diagonal and weight, while its image indicators, such as brightness, contrast, clarity, resolution and color saturation remain at the same highest level. And since in general the mini version of the Apple tablet is much lighter and smaller in size, it is more convenient to take it with you all day, which at the same time increases the likelihood of damage to the most vulnerable component of the iPad mini - its screen. As a result, with the increased demand for this model, the number of calls to service centers with screen problems has also increased. - This is a fairly common service in any service center that services Apple gadgets. , although smaller than the screens of full-size Apple tablets, is still large enough to be damaged during everyday use. Here are just a few of the most common screen injuries that cause screen replacement. Firstly, these are shocks and shocks that can be caused by the tablet falling or colliding with some heavy and hard object. In such circumstances, the touch glass of the iPad most often suffers; it breaks or cracks, which definitely leads to replacing the screen. On the one hand, cracked glass is a very noticeable damage; it negates all the elegance of the iPad mini case, all the beauty of the design of this elegant gadget. You can no longer put an iPad with a cracked screen in front of you during negotiations or a meeting with a client, or take it out in front of your colleagues at a new place of work, because the iPad screen is not only the face of the device, it is also part of the image of its owner.

You may need to replace the screen on your iPad if your tablet has been the victim of a domestic incident, a fall, a hit with a heavy hard object, pressure, a sudden temperature change, or water ingress. The fact is that even though the touch glass covering the iPad screen is perfectly protected from scratches, abrasions, and some dirt, it rarely withstands strong shocks and falls. Like any hard, thin object with a large area, the glass of an Apple tablet is quite fragile. Upon request, you can receive a huge list, several dozen pages long, of companies that carry out similar activities. However, this does not mean that you cannot try this procedure yourself at home. But how do you know what you need? There are several signs. The first of them: a completely or partially broken touch glass - in this case, there is essentially no choice. Working on an iPad with broken glass is not only unpleasant, but also dangerous both for the device itself and for its owner. The next signal indicating that you are in danger of changing the screen on your iPad is the lack of response of the screen to touch.

Replacing the screen on an iPad, even if it is necessary, is an extreme measure that is taken only if other repair methods do not give the desired effect and it is not possible to restore normal operation of the screen. As a rule, screen repairs for Apple gadgets are carried out in specialized service centers, but this does not mean that it cannot be done independently at home. In this case, everything depends on the severity of the damage. If you want to change the screen because the glass on the tablet is broken to pieces, but neither the case nor other parts of the system were damaged, there is a high probability that you can replace the iPad screen with a new one without any difficulties, even if you have not done anything before similar. However, here you will need a competent and detailed instructions, which must be studied before repair and viewed during the process. The instructions should describe in detail, step by step, what, why and how you must do in order to safely change the glass on your Apple tablet. And if you carefully follow the instructions of your invisible instructor, use exactly those tools that will be recommended to you, be careful about those points of work that will be emphasized and avoid the pitfalls that the author warns you about, then be sure that The operation on an iPad to replace the screen will go off with a bang.

Ipad has a black screen? This is a problem, especially if with such a problem there are other problems with the iPad. As a rule, such manifestations of system malfunctions as the screen going blank during operation or the iPad 2 having a black screen are all consequences of mechanical damage received by the iPad. The fact is that the screen, and especially its touch glass, are quite fragile; they are more vulnerable to the aggressive influence of the external environment than the system parts located inside the case. To avoid mechanical damage during daily use and transportation of the tablet, experts recommend keeping it in a special thick protective case and protecting the touch glass protective film. Of course, such precautions will not save your favorite gadget if it falls from the fifth floor, for example, but they will be very useful in moments of everyday troubles. For example, if you drop your iPad from a low height, for example, from a table or bed, then a protective case and film on the touch glass will prevent scuffs and scratches on the glass and case. Also, protective accessories are simply necessary if you constantly carry your iPad with you in your bag, otherwise The touch glass will wear out much sooner than you expected. So, after talking about preventing minor screen damage, it’s time to move on to the main topic - serious damage that leads to screen malfunctions. What does it mean that the iPad has a black screen?

The display module is one of the most unprotected parts of the tablet. Yes, there is glass. Alas, taking into account the considerable weight compared to smartphones, a fall from a small height onto a hard surface is enough and the device will fail. In the best case, you just need to replace the cable iPad display, at worst - a number of other, more complex and expensive works. Contact the highly qualified professionals working with us, they will restore correct performance quickly!

Everyone knows why a display module can fail - such as a fall on a hard surface. Since the device is quite heavy, compared to the same smartphones, the likelihood of damage is much higher. Especially with such a large screen area.

Similar consequences in the form of a non-functioning display can be obtained if moisture gets inside the case. In any case, if the picture is not displayed correctly and you cannot fully use the tablet, you should contact one of our workshops for high-quality iPad display repair at a low price.

RemFOX Service Center

The display module is one of the weakest points in modern tablets. Unfortunately, even high-quality equipment assembled at Foxconn factories is subject to the possibility of breakdown for a variety of reasons: mechanical damage, water ingress, natural wear and tear, and manufacturing defects. If you need to replace your iPad screen, we recommend contacting certified specialists working in our RemFOX service centers.

Don't trust? Please pay attention to the many reviews left by satisfied clients of the workshop. Wondering how much it costs to repair an iPad screen? Call the phone and ask the manager. You can also arrange for a professional to travel to any convenient place: at work, home or in a cafe where you are used to having lunch.

Among other things, we note high confidentiality. Our masters do not distribute other people's information and do not interfere with it. There is absolutely nothing to worry about, be sure to come and we will confirm everything in action!

Our clients who need a screen replacement on their iPad are primarily interested in the following information:

1. Where tablet repairs can be done inexpensively.

2. How to distinguish between original parts and copies.

3. Where can I watch video instructions for replacement.

In this article we will provide the information you are looking for along with detailed video reviews.

Select model:

Important: Promotion! Reduced price by 50% marked with the word “Promotion”, valid until the end of this month 1. As a spare part for an iPad from a copy; 2. We install original spare parts and provide a 1-year warranty! 3. 20-50% discount at the request of regular customers - see special 4. When repairing, choose free									Price installation details in our service center:
Name of spare parts	iPad 4, 3, 2	iPad Air	iPad Air 2	iPad mini 1.2	iPad mini 3	iPad mini 4	iPad Pro 9.7	iPad Pro 12.9	Price installations in rub.	Repair time without pressure testing (with pressure test + 4 hours)
Touch glass (original)	1980 Promotion! Promotion until Sunday	2990 Promotion! Promotion until Sunday	3900 Promotion! Promotion until Sunday	2790 Promotion! Promotion until Sunday	2950 Promotion! Promotion until Sunday	4900 Promotion! Promotion until Sunday	5900 Promotion! Promotion until Sunday	6900 Promotion! Promotion until Sunday	600	40 minutes
Display (original)	2890 Promotion!	3450 Promotion!	7900	2840 Promotion!	3400 Promotion!	8900	11900	12900	600	40 minutes
Touch glass (copy)	790	1190	1190	1390	1390				600	40 minutes
Home button (body part)	980	980	980	980	980	980	980	980	600	40 minutes
Home button (inner part: cable with components)	860	860	860	860	860	860	860	860	600	40 minutes
Volume button cable, power button	970	970	970	970	970	970	970	970	600	1 hour
Headphone cable	860	860	860	860	860	860	860	860	600	1 hour
SIM card cable	880	880	880	880	880	880	880	880	600	2 hours
Speaker	1280	1280	1280	1280	1280	1280	1280	1280	600	2 hours
Microphone	1190	1190	1190	1190	1190	1190	1190	1190	600	2 hours
Antenna	260	260	260	260	260	260	260	260	600	2 hours
Battery Promotion!	1980	1980	1980	1980	1980	1980	1980	1980	600	3 hours
Large iPad camera	860	990	990	990	990	990	990	990	600	40 minutes
Camera small iPad	790	990	990	990	990	990	990	990	600	40 minutes
Power connector with cable	1300	1300	1300	1300	1300	1300	1300	1300	600	40 minutes
Power connector	1280	1280	1280	1280	1280	1280	1280	1280	600	40 minutes
WiFi antenna	800	800	800	800	800	800	800	800	600	40 minutes
Wi-Fi module	1500	1500	1500	1500	1500	1500	1500	1500	600	from 2 hours
Power management chips	2290	2390	2390	2390	2390	2390	2390	2390	600	from 2 hours
Pad	800	800	800	800	800	800	800	800	600	40 minutes
Back cover (case) Promotion!	2985	2985	2985	2985	2985	2985	2985	2985	1200	from 2 hours
Sim reader	890	890	890	890	890	890	890	890	600	2 hours

Become our regular customer and get a discount on our special.
Service center services
Installation of modules and components: display, speaker, case repair, etc.				from 100-900 rub., from 20-50 minutes
Installation of radio elements: capacitor, diode, transistor, varistor, etc.				from 50-900 rub., from 1 hour
Restoring the printed circuit board (without replacing radio elements)				from 200-800 rub., from 1 hour
Installation of microcircuits, controllers, etc.				from 600 rub., from 1 hour
Recovery after moisture ingress				from 900 rub., from 1 hour
Firmware				900 rub., 40 minutes.
Diagnostics and troubleshooting are free!

Video instruction: How to distinguish original spare parts from copies. Which option is better?

Watching the video below will help you determine the quality of the components.

Video instructions for replacing the display on an iPad

In the video materials we will talk about how the screen repair on an iPad is carried out.

You can watch the rest of the videos in the section quality control

We have provided a description of the repair process in various video instructions. The repair itself can be carried out as follows:

1. Our service center technicians can change the screen - everything will be done efficiently, and based on the instructions you have reviewed, you will be able to control the quality.

2. If you choose to repair it yourself, you can purchase everything you need from us.

In what cases do you need to change the screen on your iPad and in what cases is the problem not in the screen?

• 100% screen will have to be replaced if the display is broken, appeared dark spots on it or drips.
• 90% of the time the screen flickers, it has to be replaced. In 10% the problem is in other components.
• IN 90% stripes on the display means it will have to be replaced. In 10% the microcircuit may fail.
• 90%, if the screen is white, it changes. 10% fault in the controller.
• IN 70% the screen shakes, there are artifacts on it, in this case the part has to be changed. In 30% of cases, the cause of the breakdown is the microcircuit.
• The backlight does not work, then the screen changes in 10%. In 90% of cases the problem is different.

If you urgently need the correct, that is, safe, effective, inexpensive repair with original components, and even with a 1-year warranty, then contact our specialized Apple service center. Only in such professional repair shops the screen replacement of iPad 4, 3, 2, Air, Air 2, mini 2, 3, Pro is carried out at top level and on terms that are primarily beneficial to our clients, or rather to us:

• The iPad display is replaced using exclusively suitable, “original” spare parts brought to the warehouse directly from the manufacturer’s factory;
• the repair time for the gadgets in question is reduced to a minimum; quite often, the functioning of the device is resumed directly in the presence of its owner;
• prices for software and technical maintenance for iPad 4, 3, 2, Air, Air 2, mini 2, 3, Pro have been reduced to the limit (read about this below);
• A one-year warranty is provided mandatory and unconditionally.

Repair prices:

The prices for iPad screen repair in our unique service center Zhsmoskov are so affordable and low that some clients seem untrue. But believe me, this price can be perfectly combined with quality service, we will prove this to you in practice. First, take a look at the price list to get used to such cheap rates, and then come to us. You will be another lucky person who saved time and money, and in return received a perfect restoration of the tablet’s touch glass.

How to replace an iPad screen

To ensure that the display replacement on iPad 4, 3, 2, Air, Air 2, mini 2, 3, Pro is successful, bring the faulty device to service center Gsmmoscow, which is located at the address specified in the “Contact Information” section. You can also call a courier to your home completely free of charge in order to entrust the delivery of the device to him and not waste your time on it.

When the device in question arrives with us, our repair specialists will immediately begin fulfilling the order:

1. They will certainly carry out initial computer diagnostics first. The proposed examination, as you already know, is not paid for by our clients. The inspection will last approximately twenty minutes, depending on the number of defects detected;
2. Then the information received is analyzed, the client is informed about the repair time (from half an hour) and the cost of services (see the price list):
   • in order to correctly and safely change a faulty screen glass or the entire display, you will have to spend about thirty minutes;
3. When all existing problems are eliminated, final control testing is carried out and a one-year warranty is issued;
4. About the cost of procedures, ask consultants-hotline operators or, if more convenient, read the price list.

Do you need an urgent display replacement?

Experienced service center employees will easily do urgent repairs your iPad, just warn them about the rush. We promise that we will complete the task in up to half an hour, no more. Often you have to change screens or touchscreens so quickly. By the way, you won’t have to pay extra for efficiency.

It happens that your iPad tablet Pro stopped turning on, the touch screen does not work or the screen is broken. In this case, you will need to replace the display ipad pro on new. Of course, you can take the device to the nearest service center, but it is much easier and more economical to replace it yourself by purchasing a screen module.

The causes of iPad Pro display breakdowns can be:

• mechanical shocks;
• moisture penetration;
• placing heavy objects on top;
• failure of the microcircuit (mainly due to power surges during charging);
• problems with the cable or printed circuit board;
• manufacturing defects.

Preparatory activities

Warm up the thermal bag in the oven or microwave - the heating time should not exceed 30 seconds. When removing the thermal bag, try to grasp it by the edges. If you see that it is too swollen, do not touch it as you may get burned. In general, the thermal bag retains its heat for 10 minutes. While disassembling the device, you may need to warm up the device several times.

If your glass is cracked, it is recommended to seal it with tape. The entire screen is glued to prevent splinter damage during disassembly. In addition, such protection will ensure correct opening of the tablet. It is recommended to wear glasses just in case.

What tool should I prepare?

To replace the display you will need:

• 6 picks for opening;
• sucker;
• spudger;
• thermal bag for heating glue or hair dryer;
• screwdriver.

Before starting work, be sure to turn off the tablet. You should purchase a replacement part - a display assembly.

Replacing the ipad pro display: a detailed guide to action

1. The ipad pro has adhesive strips in different places. The following photo shows where the thickest layer of glue is. Knowing these places, you will need to vary the depth of penetration of the mediator.
2. Place a thermal bag on the left edge of the iPad. Wait a few minutes for the glue to soften. If you don't have a thermal bag, you can use warm air from a hair dryer.
3. Place the suction cup near the left edge of the tablet exactly in the middle.
4. Hold the corners of the iPad and gently pull up a few times. Such manipulation is performed in order to weaken the tightness of the gadget.

Once you see a small gap, insert a spudger or pick into it. The sharp part of the tool should not penetrate further than 2 mm, otherwise you risk damaging your tablet.

1. Place the thermal bag along the lower left corner. After the glue has softened, insert a spudger near the pick and run it along the bottom left edge. Remember, do not push the tool too deep. You may need additional heating of this part of the device.
2. Insert the pick at the bottom left edge (closer to the corner), removing the spudger.
3. Preheat top corner iPad, affecting the front camera. Once the glue has softened, insert the paddle above the pick on the left corner and remove any excess glue by working your way up to the corner.
4. Remove the spudger and insert the triangular plate as shown.
5. Now your task is to completely warm up top part iPad pro. Insert the spatula into short distance and move towards the front camera. Once you reach it, stop.
6. Immediately before front camera replace the spudger with a pick.
7. Warm up the top using a thermal bag again. After a few minutes, insert the spatula behind the front camera and move it to the upper right corner. After removing the glue, replace the tool with a plastic plate.
8. To soften the glue, once again place a thermal bag on the right side of the device. Walk the spudger to the middle of the iPad (stop in front of the front camera). Replace the instrument with another mediator.
9. Go a little lower and insert a spatula between the display and back housings. Draw it down along the right edge, going down to the corner.
10. Once again, replace the instrument with a mediator. The location of the plastic is the lower right corner.
11. Using a thermal bag, soften the glue connecting the parts of the iPad from below. Insert the spatula again and run it from the right corner to the center of the end. You need to stop at a distance of 1 cm from the Home button. If you do not do this and continue to walk with the tool, you may damage the cables. Remove your spudger and use a plastic triangle.
12. Turn the thinnest edge of the spatula and go directly under the button.
13. Having overcome the “Home” button, you can again drive the paddle deep, clearing to the left end of the lower edge (the pick is already installed there).
14. Look at the diagram from step 1. Make sure that the areas with the thickest glue strips have been successfully cleared. Otherwise, you will have to carry out additional cleaning of the glue using a thermal bag.

This iPad model has very short cables. Do not rotate the display around the bottom edge. The cables can also become unusable if the screen is raised 80 degrees.

You need to lift the display 60-70 degrees to access its individual parts.

1. You need to remove the battery as a short circuit may occur. To do this, you need to unscrew 9 screws (eight 1.2 mm and one 2.4 mm). Keep the display open and ensure that the display cables do not become kinked during operation.
2. Raise the metal shield protecting motherboard. It will take some effort to remove the plate. It may become slightly deformed during removal.
3. Unscrew the 1.8 screw covering the battery connector using a screwdriver.
4. Insert a battery lock or any other tool into the motherboard and leave it there for isolation purposes until the repair is completed.
5. Remove the 3 screws above the display cable bracket (2.4mm and 1.2mm). Remove the metal plate.
6. Remove the two cables from their sockets on the motherboard.
7. Now you can remove the display. Be sure to remove all remaining adhesive and install new adhesive strips.
8. Replace the screen.
9. Reassemble in reverse order.

Occasional freezing or no display are signs that your iPad's display needs to be replaced. This problem may occur if the device is handled carelessly, mechanical impact or impact.

You should not try to repair the iPad display yourself, as without special equipment and professional skills there is a risk of damaging the glass, which is tightly glued around the perimeter. Entrust the screen repair of this expensive equipment to specialists! Bring your tablet to the ModMac service center yourself or use our free courier delivery service. Our technicians will quickly repair your gadget so that you can enjoy its full functionality.

How to replace the display (screen) on an iPad in ModMac

Causes of failure

• No image
• There are spots on the screen defective pixels, streaks or streaks
• Display damaged by water

Troubleshooting steps

1. The master removes from iPad glass
2. Carefully disconnects cables and connectors of a non-working screen
3. Installs a new one in its place original display
4. Cleans the seating surface from adhesive residues
5. Glues back the touchscreen using special glue
6. Checks display and touchscreen operation

Result

As a result of the repair, you receive a finished iPad with a new display. To work and installed part 90 days warranty provided

Benefits of replacing iPad display with ModMac:

ModMac service center is one of the leading companies in the Moscow market for repairing iPad, iPad 2, iPad 3, iPad4, iPad Air, iPad Mini, iPad Mini Retina and other Apple equipment.

• free diagnostics of faults and consultation with a specialist;
• fixed price for services and spare parts;
• repairs are carried out in an extremely short time - from half an hour;
• availability of original components in stock;
• free courier delivery of a device in need of repair to a service center and a repaired gadget to the customer’s address;
• Warranty on work and components – up to 90 days.

But still, our main advantage is our professional staff of specialists who have solid experience in both replacing the iPad display of all generations, and in repairing any other malfunctions of Apple tablets.