What to do if 6s fell into the water. iPhone fell into water: what to do first? Step-by-step actions after getting your smartphone wet
The likelihood of dropping your iPhone in water is very high. Usually such situations occur due to our negligence. It is important to provide “first aid” to the device in a timely manner so as not to say goodbye to it forever. That is why we decided to “instruct” our readers what to do if moisture gets into a smartphone.
In fact, there are options for liquid getting into the housing mobile device there are many, but the most common of them are “dropped the iPhone in water” or “spilled water on the phone.” What happens at that unfortunate moment when the iPhone comes into contact with water.
The very first vulnerable part of the device is, of course, the screen module, which consists of several layers: protective glass, anti-glare layer, touch module, screen matrix and backlight. In turn, the backlight also has 6 components:
- outer mirror layer 
- anti-glare protection 
- another mirror layer 
- plastic diffuser
- third mirror layer 
- LED frame 
All six components are then placed into a thin frame, which contains LEDs that control the brightness of the display. Depending on whether you increase or decrease the brightness of the screen, the light level of the LEDs changes.
What not to do if water gets into your iPhone 6
It is important to remember a few rules about what you should not do if your smartphone falls into water or vice versa.
- You should not turn on a damp device, otherwise there is a possibility of aggravating the problem.
- Never use a hair dryer to dry your phone or its individual components.
- Do not try to disassemble the iPhone and diagnose the extent of damage yourself.
- You should not turn to the Internet to find a folk solution to the problem. It’s better not to waste your time - run to the specialists.
Why do streaks and spots appear on the iPhone 6 display?
The first visual changes on the iPhone 6 display are spots and streaks. This is the result of water seeping between the various layers that make up the screen module. Due to the fact that the module components do not have a sealed connection, water can get between them and leave marks behind.
There is no point in waiting for the liquid to evaporate - it will never completely disappear. Trying to independently disassemble the smartphone and the screen module into its constituent layers in order to wipe and dry each one will result in failure for you. As a result, you will damage the backlight, and each of the layers, since their structure has a rough surface.
Your slightest interaction will result in scratches. There is nothing left but to replace the screen.
How to remove stains and stains from the iPhone 6 display
If you notice the first signs of spots or streaks appearing on the display, do not try to disassemble the smartphone and remove them yourself. You cannot solve the problem yourself - you will only do more harm.
There is no way to save the iPhone 6 display. Do you need a replacement? iPhone display 6. Call technicians from the Display Master service center to your home in Moscow. They have a free visit, and they fix such a malfunction in 30 minutes before your eyes. This service costs 3,500 rubles.
Agree that it is better to pay once to replace the iPhone 6 display to real specialists in this matter than to trust your own hands, especially if they grow from the wrong place.
Despite the fact that the sixth iPhones appeared quite recently, some owners have already accidentally drowned their gadgets. In the first minutes after moisture gets under the cover of the iPhone 6, you can at least somehow reduce the damage, but there is nothing you can do about the damage that the water has already caused - you will have to send it in for repair. Flooded iPhones can most often be repaired, and sometimes not even very expensively. In this post we will tell you how diagnostics and repairs of “drowned” vehicles are carried out in service centers.
Service center providing Apple repair Macplus.ru, kindly provided us with a detailed report on the repair of a flooded iPhone 6. We look, sympathize and remember what your gadget will have to face after encountering water.
So, a flooded iPhone 6 was brought to the workshop, and it had been flooded for a long time, about a day ago, and was completely unresponsive to any actions.
To begin with, the master disassembled the “drowned man” by unscrewing two screws at the base of the iPhone 6 and lifting the display module. Inside, the gadget is very similar to the previous 5s model.
iPhone 6 disassembly After parsing from motherboard the cable is disconnected, and the module opens to the side for the time being.
In general, when water penetrates inside a smartphone, the motherboard suffers the most, so you need to carefully inspect it.
The technician unscrews the screws around the perimeter of the board and disconnects all cables from it. Then the hinged “plugs” are removed and a disassembled iPhone 6 appears before us, without the “motherboard” and display.
After examining the inside of the phone, the forecast was optimistic - the elements did not have time to oxidize, since water had only recently been under the cover.
To find out why the iPhone 6 is not working, it was necessary to diagnose the motherboard, but first, clean it from the consequences of drowning.
For this purpose, a small ultrasonic bath Ya Xun YX200A is used.
The “motherboard” is immersed in the cleaning liquid and is exposed to ultrasonic waves for some time.
After cleaning, diagnostics of the board begins using a microscope. The technician identifies burnt elements to determine what kind of iPhone 6 repair will be required in this case.
In our case iPhone owner 6 was lucky - only one element needed to turn on the smartphone was damaged, and it is inexpensive. The technician re-soldered the board, replaced the part, assembled the iPhone 6 and turned it on.
The repair of the sunken iPhone 6 was not only successfully completed, but also cost the owner very little. There are several reasons for this - quick turnaround, a good master and, maybe, a little luck.
In any case, if your iPhone 6 gets wet, take it to a service center, without waiting for it to “fix itself.” The less oxidation of parts, the cheaper the repair will cost you.
If you flood your iPhone with water, the speaker does not work, you must urgently perform a series of procedures that will extend the life of the phone. The serviceability of the internal elements of the smartphone depends entirely on how quickly and correctly you act. In addition to oxidation processes, the iPhone is at risk of damage to contacts and microcircuits due to short circuits. Water is an excellent conductor of electricity, so even a few drops of rain can damage the board, connectors and speakers of a mobile device.
Experts suggest a number of actions that will remove moisture from the iPhone. Their timely implementation will prevent damage mobile phone. If, after cleaning the water yourself, you still cannot hear sounds or some functions of the device do not work, contact a qualified technician.
How to restore a smartphone
After prolonged contact of water with the iPhone, it will begin to work poorly, destructive processes are activated, which will no longer be possible to prevent. It is very important that after your phone has been exposed to raindrops or dropped into liquid, you react quickly. Due to moisture penetration, the smartphone may stop turning on and even an experienced technician will not be able to restore it.
If your mobile equipment gets caught in the rain or your smartphone falls into water, you need to do the following:
- get your iPhone out of the water immediately
- turn off the phone (turning off the power will prevent short circuits)
- remove the case and other accessories (the film and protective glass must be removed from the screen only if moisture bubbles have formed under them)
- thoroughly dry the iPhone from water (try to remove water from the case and holes using any available means, make sure that the speaker does not get wet)
- check moisture penetration indicators
To prevent the iPhone from stopping working after moisture penetration, it is advisable to disassemble the device and dry the battery. The power supply can only be carefully removed using the Pentalobe tool. If you do not have experience and special equipment, then it is better to seek help from specialists.
Liquid penetration indicators are located in the connectors. The normal color is white. If the indicator strips turn red, this means that liquid has entered the iPhone.
How to disassemble the gadget and remove the battery
After you drop your smartphone in water, do not check if it works. If the connector gets wet or the screen gets wet, quickly remove the moisture and remove the battery. When removing the power supply, it is necessary to take into account technical features iPhone.
Battery removal steps:
- Using a special suction cup and a plastic opening tool, remove the front panel
- remove the latches connecting the case and screen
- disconnect the connecting cables from the front panel
- unscrew the screws holding the case to the iPhone board
- unscrew the screws connecting the battery to the main board
- loosen the adhesive grip around the battery (use a plastic spatula to do this)
- remove the battery
You need to reassemble the iPhone in reverse order. If after turning on the device does not work or the picture does not appear on the screen, most likely you have connected the cables incorrectly.
Ways to restore a smartphone at home
If you dropped the device in water or the connectors were filled with drops, after the above steps you can perform a number of other procedures to restore your iPhone. These include the following methods:
- put the iPhone in a container with rice
- download special applications, which, by playing sound at a frequency higher than 150 Hz, “push” water out of the connectors
- clean all internal elements and treat them with an anti-corrosion agent
The first two methods work effectively in cases where you have not wet the device too much. Rice has good absorbent properties, but it will only absorb the water that was on the surface.
If you flood your iPhone with water and the speaker partially does not work, or you can’t hear anything at all, then you should immediately contact a technician.
- hair dryer treatment
- wrapping the gadget in a towel
- drying on a radiator
Heat from a hairdryer or battery will speed up the evaporation of water, but at the same time increase the likelihood of a short circuit. If the phone gets wet and you immediately wrap it in a towel, then the humidity inside the device will increase, which will activate corrosion processes.
How can you protect your smartphone from liquids?
There are many ways to protect your gadget from water. First of all, to prevent your iPhone from getting wet, do not use the phone in the rain, during water procedures, or in rooms with high humidity.
To effectively protect against moisture, Apple recommends the following methods:
- use of waterproof cases
- installation protective glass to the screen
- use of water-repellent coating
You can purchase cases and glass at any specialized store. To apply a water-repellent coating, you must contact a qualified technician.
Cases and coatings will not 100% protect the phone if it has been dropped into liquid and stayed there for a while. Accessories will successfully prevent moisture from penetrating inside if you clean the device immediately after wetting it with water.
Fair, not overpriced and not underestimated. There should be prices on the Service website. Necessarily! without asterisks, clear and detailed, where technically possible - as accurate and concise as possible.
If spare parts are available, up to 85% of complex repairs can be completed in 1-2 days. Modular repairs require much less time. The website shows the approximate duration of any repair.
Warranty and responsibility
A guarantee must be given for any repairs. Everything is described on the website and in the documents. The guarantee is self-confidence and respect for you. A 3-6 month warranty is good and sufficient. It is needed to check quality and hidden defects that cannot be detected immediately. You see honest and realistic terms (not 3 years), you can be sure that they will help you.
Half the battle is Apple repair- this is the quality and reliability of spare parts, so a good service works with suppliers directly, there are always several reliable channels and your own warehouse with proven spare parts for current models, so that you do not have to waste extra time.
Free diagnostics
This is very important and has already become a rule of good manners for the service center. Diagnostics is the most difficult and important part of the repair, but you don't have to pay a penny for it, even if you don't repair the device based on its results.
Service repairs and delivery
Good service We value your time, which is why we offer free shipping. And for the same reason, repairs are carried out only in the workshop of a service center: they can be done correctly and according to technology only in a prepared place.
Convenient schedule
If the Service works for you, and not for itself, then it is always open! absolutely. The schedule should be convenient to fit in before and after work. Good service works on weekends and holidays. We are waiting for you and working on your devices every day: 9:00 - 21:00
The reputation of professionals consists of several points
Company age and experience
Reliable and experienced service has been known for a long time.
If a company has been on the market for many years and has managed to establish itself as an expert, people turn to it, write about it, and recommend it. We know what we are talking about, since 98% of incoming devices in the service center are restored.
Other service centers trust us and refer complex cases to us.
How many masters in areas
If there are always several engineers waiting for you for each type of equipment, you can be sure:
1. there will be no queue (or it will be minimal) - your device will be taken care of right away.
2. you give to Macbook repair an expert in the field of Mac repairs. He knows all the secrets of these devices
Technical literacy
If you ask a question, a specialist should answer it as accurately as possible.
So that you can imagine what exactly you need.
They will try to solve the problem. In most cases, from the description you can understand what happened and how to fix the problem.
If your iPhone fell into water, you spilled coffee or other liquid on it, the chances of completely restoring the phone will directly depend on the speed of your actions. Take the following steps immediately:
- turn off your phone if it gets wet to avoid short circuit
- blot your dropped phone with an absorbent cloth
- dry your phone by following the tips below
If you are the happy owner of the seventh iPhone model, there is no reason to worry at all. Latest versions The famous “apples” are maximally protected from liquid getting inside, and neither its display, nor the sensor, nor the speakers are afraid of water. Manufacturers guarantee that you can safely swim with it in the sea, talk in the rain, use it in the pool, or spill coffee on it. After falling into water or getting moisture on the body of the device, it will be enough to wipe off drops of water from its surface with a soft, well-absorbing cloth.
With other versions of iPhones, after they have been in or under water (for example, “drowned” in a toilet or got wet in the rain), you will have to tinker. Even slight exposure to moisture can cause serious damage to them, the elimination of which will cost you a lot. Moisture getting inside the device is especially dangerous, since drops of water often lead to corrosion processes and irreversible damage to the electronic components of the iPhone.
You will encounter the following problems with the operation of a smartphone that fell into water and was not dried in time:
- iPhone screen is cloudy
- The display does not transmit the image correctly, streaks have appeared
- no sound and speakers don't work
- The phone does not charge well and does not hold a charge
- screen sensor does not work
- camera doesn't shoot well
To avoid all these troubles from exposure to moisture, it is necessary to properly dry the device, and if there are consequences of water droplets getting on the electronic components, immediately take the iPhone for repair.
First steps after getting wet
If your iPhone falls into water and you immediately pull it out, remove all drops of water from its surface. Blot a smartphone that gets wet with a dry cloth or soft cloth. To avoid liquid getting inside and oxidizing electronic components, dry your phone if it gets wet. There are three ways to do this:
- use a special drying cover
- dry with a hairdryer
- use rice
The most effective and safe way To minimize the impact of moisture on an Apple device that has been wet, use a special case for drying iPhones. The phone must spend at least 48 hours in it, after which its functionality will be fully restored. It’s good to use such a gadget after you’ve been caught in the rain with your iPhone, accidentally dropped it into the toilet, or spilled coffee or other liquid on it. Before drying the device, it must be turned off.
If there is no case, ordinary rice will help to minimize the impact of moisture on the dropped phone. The procedure for restoring a smartphone that has gotten wet in the rain, been in water, or had something spilled on it is simple:
- take a deep cup, put the iPhone in it that has been in water (toilet, puddle)
- cover your phone with rice
- Dry your smartphone this way for at least 24 hours
The rice should absorb all the water and stop the corrosion process on the internal parts of the iPhone. The disadvantage of this method is the inevitable entry of rice particles into the camera, speakers and other connectors of the smartphone. After you dry the phone, the camera, screen sensor, headphone and charging jacks will need to be cleaned.
If you decide to dry your phone with a hairdryer, avoid getting the case too hot. It is best to first disassemble the iPhone model and remove its battery. After this, direct the minimum air flow towards it. internal components, after all, it’s a sensor Apple devices, and the camera, display, and speaker modules are extremely sensitive to any overheating. Unacceptable:
- dry your phone at high power
- use the “hot” drying mode
- bringing the hair dryer too close to iPhone components
IN otherwise You will need a screen replacement and other Apple repairs.
You can also disassemble and dry an iPhone that is wet or completely “drowned” in water, naturally. Remove the battery and leave the device open for a day. If, after falling into water, your smartphone worked and did not turn off, the measures listed should be enough to full recovery phone.
When is service repair needed?
An iPhone that has fallen into water must be urgently taken to a repair specialist if a short circuit occurs and the smartphone does not turn on after being removed from the liquid. The following “symptoms” are also reasons to contact a specialist:
- the ingress of liquid led to streaks on the screen or loss of the image altogether
- you spilled any chemical liquid on your iPhone
- the phone lay in the water for more than 30 seconds before it was taken out
- fluid ingress is aggravated mechanical damage housing
Blot the wet phone with an absorbent cloth and take it to a professional. A specialist will eliminate the effects of moisture on the internal electronics. Will be used for this.
