How to set up mms on android. Connecting and properly configuring the mms service on the beeline How to set up the reception of mms on the beeline

Posted Tue, 03/13/2012 - 16:22

In order to receive and send mms messages, as well as in order to access the Internet from a Beeline phone, you need to configure mobile phone. There are two ways to set up a GPRS connection, as well as set up sending and receiving mms messages - manually and automatically. This article describes how to get Beeline automatic settings and setting up mms, wap, gprs, java connections in manual mode .

Set up Internet, auto-tuning through a request.

Number to send or send phone settings, to receive mms and sms on beeline phone.

1. Automatic settings for Beeline receiving via SMS.

In order to receive SMS on your phone with automatic GPRS-Internet settings for Beeline, call the number 0880 . Save settings password 1234 .

For getting automatic settings MMS must be ordered, they are on the Beeline website (link below) or by free number 0604 32 in the "Settings" section.

Save automatic settings in your phone. Restart your cell phone To do this, turn it off and then on. Make sure in the settings mobile internet settings are selected as active Beeline GPRS.

2.1. Order SMS with automatic settings MMS for your phone on the site
mobile.beeline.ru .

2.3. Order receiving SMS with automatic Beeline settings GPRS for your phone on the site mobile.yandex.ru .

3. Manual phone setup for MMS, Wap, GPRS, Internet.

Beeline manual settings for receiving and send MMS, settings for accessing the Internet via WAP or GPRS.

3.1.Setting up the GPRS Internet.

In order to set up the phone manually. You need to do the following. Open menu in phone "Settings" and select the item with the parameters of the Internet connection. Depending on the phone model, this item may be called “Connection”, “Internet settings” or “Data transfer”. Enter the parameters below.

Beeline Internet
http://wap.beeline.ru
GPRS
internet.beeline.ru
beeline
- Password: beeline

3.2.Setting up sending and receiving MMS.

Find an item on your phone MMS setup and enter the following parameters:

Profile name: Beeline MMS
- Homepage/Message server (Home page/Message server): http://mms/
- data channel (Data Bearer): GPRS
- Access point name (APN): mms.beeline.ru
- IP address: 192.168.094.023
8080 (or 9201 for WAP phones 1.x)
- Username: beeline
- Password: beeline

After manually setting up the phone you need to send a test MMS message to any addressee (for example, to yourself). It is necessary to register you in the Beeline network as a user of the MMS service.

Show more

3.3.Setting up a WAP connection.

Important, configure Internet access via WAP compound Not recommended, because Until recently, the cost of WAP traffic compared to GPRS traffic was many times more expensive. This information can be clarified with Beeline by calling the short reference number 0611 Beeline. The call is free. It is best to access the Internet through a GPRS connection, for this set up the phone according to paragraph 3.1.

To set up a WAP connection, you need to go from the main menu of the phone to the settings section and create a new access point with the following parameters:

Profile name: Beeline WAP
- Home page: http://wap.beeline.ru
- data channel (Data Bearer): GPRS(or CSD for WAP 1.x phones without GPRS support)
- Access point name (APN): wap.beeline.ru(not specified for WAP 1.x phones without GPRS support)
- Commutation number: 0671 (indicated for WAP 1.x phones without GPRS support) - IP address: 192.168.017.001
- Port number: 8080 (or 9201 for WAP 1.x phones)
- Username: beeline
- Password: beeline

The names of the menu items and the number of settings may vary depending on your phone model.

If when creating profiles Beeline Internet, Beeline MMS, Beeline WAP these profiles are already in the phone settings, then you do not need to re-create them, but you need to go into these profiles and check the settings are correct.

P.S.: After receiving the settings, you need to make sure that your tariff plan allows access to the Internet, as well as sending MMS messages. You can find out about this by calling the Beeline help desk at a toll-free number 0611 .

How to order and receive free automatic internet and mms settings for beeline on your phone. How to set up a phone to access the Internet, setting up mms on a beeline.

The ability to send multimedia messages is a hallmark of modern mobile communications. MMS Beeline is information messages, which may contain graphics and sound files, text documents and links. In this case, the volume of files will be about 500Kb, no more. When sending such a message, you can show your writing skills in all its glory, because the total amount of text characters allowed for sending is more than one thousand characters. You can send MMS not only to any mobile phone in Russia and abroad, but also to email. The cost of sending a message depends on the basic tariff of the subscriber and usually amounts to about 7.95 rubles.

If you have an Internet connection, then the Beeline MMS service may not be available to you, or rather, it is disabled by default. To send multimedia messages, you will have to make the necessary changes yourself.

How to connect MMS Beeline?

• To activate this system messaging, you just need to call 0611 and follow the voice menu instructions. You can also just go to your personal account and just check the services connected to your tariff. If a this service if you don't have it, then you can connect it in the following ways:
• Use the normal USSD command *110*181# . The system for sending and receiving MMS will be connected instantly, and you will receive an informational notification about the activation of the service.
• You can also enable the service in the corresponding menu of your own personal account. Simple follow Services=>Available, select from MMS list.
• To simplify service management, you can use special application for smart devices "My Beeline".
• If you go to the local branch of Beeline subscription service, then specialists will definitely help you.

Automatic activation of MMS Beeline

The MMS profile will require the correct settings, which can be obtained from automatic mode from Beeline. The procedure is as follows:

Find your phone model in the search system and then use the "Beeline MMS Settings" link, which is also in the SIM card menu. When you click on the link, the system will automatically send you the necessary settings.

The system will prompt you to continue setting up MMS. Just follow the instructions.

Enter your phone number and request the necessary settings. In rare cases, automatic adjustment of system parameters is not possible. Then you have to look for a way to activate MMS for specific model phone. Usually all the necessary information is in the user manual. The setup procedure will be different depending on the phone model.

After receiving special file with the system configuration, you will need to run it and then reboot the device. You can also get the necessary settings by calling the number 060432.

If all settings have been activated correctly, then you can send and receive MMS immediately after activating the service.

Manual setting of MMS Beeline

If you do not have the opportunity to use the methods listed above, then you can create your own new profile MMS from scratch and write the necessary configuration settings into it. Here is the information you will need to enter into your profile in order for it to work.

mms is a special type of telephone message that allows you to send and receive attached media files (photos, animated pictures, music and short videos). This type of file transfer from phone to phone is still popular, given that in many regions of Russia a stable Internet connection has not been established. Below we will talk about how to set up MMS for users mobile operator beeline.

By default, each operator enables its users to send MMS. If you have previously disabled such an option, then you can connect it to Beeline absolutely free of charge with the following USSD command:

Connecting MMS Beeline

1. Getting automatic settings.

Most affordable way connect MMS on Beeline - send a request for automatic settings. To do this, from your phone, call the toll-free number 0604 32 . Next, you will receive the settings that you need to accept. Your phone will then be ready to send and receive MMS messages.

2. Manual setting MMS.

If for some reason you were unable to receive, this procedure can be carried out manually.

To do this, go to your phone settings and find the section "Connection profile" (name may vary). Create a new profile with the name "Beeline MMS" and give it the following options.

The Beeline mobile MMS service opens up wide opportunities for the transmission of multimedia instant messages between subscribers. Such messages may contain audio recordings, videos, photos, texts. The allowed file size to be sent is 500 kilobytes. The character limit is 1000 characters. You can send MMS to telephone number or by email. The cost of one such message varies from the established tariff plan. Approximately this amount is equal to 8 rubles.

The transmission of MMS messages when using the Internet is blocked, which means that in order to communicate with other subscribers via MMS, you will need to connect, as well as set up on your phone.

To clarify information about connecting this service, you need to call the support service number 8-800-700-0611 or visit your Personal Account, where you can see the full list of services. In situations where the MMS option is not enabled, you can use one of the activation options listed below.

1. Type the command on your device *110*181# . After that, a package of three services will be activated, the lists of which also include the possibility of using MMS.

1. You can also activate this service using your Personal Account. Here you need to open the "Services" tab, and then "Available", then select the MMS connection point.

1. By visiting the Beeline office, you can ask the consultant to activate this service, which he will do for free.

MMS settings in automatic mode

After activating MMS, you need to carry out correct setting services to open access to send and read messages. To achieve this goal, the following actions are required:

• Follow the link "Beeline MMS settings" to go to the menu for providing MMS settings for a specific device model in automatic mode.
• In the list that opens, select the required model of the mobile device or manually write its name.
• Next, you need to click on "MMS", then on "Yes, go to MMS settings"
• If a automatic settings for your phone is available, then you need to dial your phone number in the window and click "Send Settings". In situations where the settings are only available in manual mode, you need to read the instructions for your device model and follow it in sequential order.
• You need to apply the MMS configuration files that will be sent automatically, then reboot mobile device. In addition to the considered option for obtaining automatic settings, they can also be obtained free of charge by calling the number 060432 .

After rebooting the device, the option will become available for use.

Manual setting of MMS Beeline

Sometimes there are situations when the user does not have the opportunity to visit the site and get data about the settings of the MMS service in manual mode for specific device. In such situations, you need to create an MMS profile in your phone settings.

Data for creating a profile:

• Name: Beeline MMS;
• APN: mms.beeline.ru;
• Login and password: beeline;
• MMSC: http://mms;
• MMS port: 8080;
• Proxy MMS: 192.168.094.023;
• Protocol: MMS;
• APN type: mms;
• Authentication type: PAP.

After saving the profile with the specified information, you should restart your mobile phone, after which the MMS sending and receiving service will become available.