Personal account Wi-Fi router Beeline. Correct configuration of Beeline routers

Along with the Internet from other providers, users quite often use equipment and services from Beeline. As the article progresses, we will tell you how you can configure your router for a stable Internet connection.

Today, the Beeline network only operates new models of routers or those on which the updated version firmware. In this regard, if your device stops working, perhaps the reason lies not in the settings, but in the lack of support.

Option 1: Smart Box

Router Smart Box from Beeline is the most common type of device, the Web interface of which differs significantly from the parameters of most devices. At the same time, neither the connection procedure nor making changes to the settings will cause you any difficulties due to the intuitive, completely Russian interface.

1. To begin, as with any other device, the router should be connected. To do this, connect it to a LAN cable from a computer or laptop.



2. Launch your Internet browser and enter the following IP in the address bar: 192.168.1.1

After this, press the key Enter.



3. On the page with the authorization form, enter the appropriate data from the router. You can find them on the bottom panel of the case.
   • Username – admin
   • Password – admin



4. If you successfully log in, you will be redirected to a page where you can select the type of settings. We will consider only the first option.
   • "Quick Settings"— used to set network parameters;
   • "Advanced settings"— recommended for more experienced users, for example, when updating firmware.



5. At the next stage in the field "Login" And "Password" enter data from your personal account on the Beeline website.



6. Here you also need to provide information for home network for the purpose of subsequent connection additional Wi-Fi devices. Come up with "Network name" And "Password" on one's own.



7. If you use television packages from Beeline, you will also need to indicate the port of the router to which the set-top box was connected.

   

   It will take some time to apply the settings and connect. Subsequently, a notification indicating a successful connection to the network will be displayed, and at this point the setup procedure can be considered complete.

Despite the similar Web interface, different models Beeline routers from the Smart Box line may differ slightly in terms of configuration.

Option 2: Zyxel Keenetic Ultra

This router model is also on the list of the most current devices, however, unlike the Smart Box, the settings may seem complicated. To minimize possible negative consequences, we will consider exclusively "Quick Settings".

Internet

A television

Once the settings have been saved, this section of the article can be considered complete.

Option 3: Beeline Wi-Fi router

The number of devices supported by the Beeline network, but discontinued, includes Wi-Fi router "Beeline". This device differs significantly in terms of settings from previously reviewed models.

As you can see, this type of Beeline router requires a minimum of actions in terms of settings. We hope you were able to set the necessary parameters.

Option 4: TP-Link Archer

This model, in comparison with the previous ones, allows you to change much large quantity parameters in various sections. At the same time, strictly following the recommendations, you will be able to configure the operation of the device without any problems.

1. After connecting the router to the PC, enter the control panel IP address 192.168.0.1 into the address bar of your web browser.



2. In some cases, you may need to create a new profile.



3. Log in to the Web interface using admin as your password and login.



4. For convenience, in the upper right corner of the page, change the language to "Russian".



5. Through the navigation menu, switch to the tab « Additional settings» and go to the page "Net".



6. While in the section "Internet", switch value "Connection type" on "Dynamic IP address" and use the button "Save".



7. From the main menu, open "Wireless mode" and select "Settings". Here you need to activate "Wireless broadcasting" and specify a name for your network.
   

   In some cases, you may need to change your security settings.



8. If your router has several operating modes, click on the link "5 GHz". Fill in the fields identically to the previously shown option, while modifying the name of the network.

If necessary on TP-Link Archer You can also set up TV, but by default, no settings need to be changed. In this regard, we are concluding the current instructions.

Conclusion

The models we reviewed are among the most popular, but other devices are also supported by the Beeline network. You can find out the full list of equipment on the official website of this operator. Check with us for details in the comments.

In addition to services cellular communication, the Beeline operator is ready to offer its subscribers high-speed home Internet. Moreover, along with the Internet, it is possible to connect high-quality digital TV. Many people use the operator’s services, demonstrating complete satisfaction with the quality of their provision. Let's see what home wireless Internet from Beeline is and how to connect to it.

We should immediately discuss the fact that the wireless Internet from Beeline, which is delivered to our apartments, is in fact very wired. That is, each apartment is supplied with a twisted pair cable (cable) connected to a server cabinet installed in the attic or basement of the house. A router is connected to the twisted pair cable, which distributes the Internet from Beeline via a wireless Wi-Fi channel. When connecting their devices to the router, household members will need to know the password.

There are two ways to get a wireless router from Beeline:

• Choose a tariff plan where it is provided for free (most likely, its cost is already somehow included in the tariffs);
• Choose a tariff where the router is offered in installments with a monthly subscription fee.

If you are not satisfied with operator routers and you want to purchase a specific model, you can choose a tariff plan (TP) without equipment. In addition, you have the right to use equipment that you already have or received from another operator.

Beeline tariffs for wireless Internet are presented in four categories. The first category includes TP with network access and television services; the router is offered in installments. In the second category, TPs with network access and television are offered, and the router is already turned on. In the third category, tariffs are provided only with the Internet and a complete router. In the last category, subscribers are offered tariffs exclusively for network access - the router can be purchased in installments.

Let's look at these tariff plans in details:

• « Home Internet and TV for 530” - 60 Mbit/sec and 122 TV channels for 530 rubles/month, the router is purchased in installments (of course, upon request);
• “Home Internet and TV for 630” – 70 Mbit/sec and 122 TV channels for 630 rubles/month, the router is provided under similar conditions;
• “Home Internet, TV and router for 650” – 100 Mbit/s and 137 TV channels for 650 rubles/month, router included;
• “Home Internet and router for 550” – 100 Mbit for 550 rubles/month, Wi-Fi router included;
• “Home Internet for 450” – 60 Mbit for 450 rubles/month, the router is purchased in installments;
• “Home Internet for 530” – 70 Mbit for 530 rubles/month, the router is purchased in installments.

Unlimited wireless Internet from Beeline can be supplemented with additional services- This " Computer help", "Turbo button", "Payment with bank card", "Fixed IP address", "Domain registration and support", "Firewall", "Balance alert" and many others. It is also possible to purchase keys for antivirus programs with a monthly subscription fee.

How to use Beeline services

Let's see how to connect wireless home Internet from Beeline - first of all, you need to visit the operator's website. Here we need the “Products – Home Internet” section. Select the “Test connection” link and enter your home address. If the house is connected to the operator’s network, you can use its services - to do this, you need to contact the nearest Beeline salon. After connecting and installing the equipment, you will receive high-speed access to the network.

In order to activate Beeline wireless Internet for a laptop or any other device, just activate the Wi-Fi connection, select your access point and specify a password. If necessary, you can go to the router settings to rename the access point and set your password.

If you still have any questions about connecting your home wireless internet from Beeline, you can ask their support service by calling 8-800-700-8378.

Beeline is one of the TOP Internet providers that operates even in the most remote areas of Russia. This organization provides access to any type of Internet - both home and mobile. But to save money, most people started using a wi-fi router.

The router can be purchased at almost all points of the Beeline operator. But sometimes setting up a router from this supplier becomes a real problem for an unprepared person. We will help you sort this out.

In general, the process does not require special knowledge, and every person can cope with this task. To do this, you do not need to call a specialist and overpay.

Reference! For different connections, the connection and installation diagram is the same.

1. If the router is new, you should unpack it and then connect the power adapter.
2. Choose a convenient location where the equipment will be located.
3. Connect to the Internet via wi-fi or cable.
4. Connect your laptop or computer to set up.
5. Connect your router to the mains.
6. Set up the router (to do this, follow the link that is written on the bottom of the router, next to it you will find your username and password).
7. Set up the Internet (discussed below).
8. Configure settings wireless network and change your username and password.

Setting up a router for Beeline - ASUS

If you look at the router from the back, you will see 4 identical holes yellow color and one blue (for the Internet). Insert the wire from Beeline into the blue port, and connect the wire to the PC into the second one. With its help we will configure the router. Next, extend the antennas and connect the router to the Network.

Important! Before you start installation, check the type of connection (in the propertiesIPv4 you must register the connection to acceptIP addresses and servers automatically!). IN otherwise, this may cause network errors during further connections.

Connection procedure

1. We launch any browser, enter 192. 168. 1 in the address bar.

   

2. Next, we indicate the parameters (basic login and password, which is written on the bottom plate of the device).

   

3. Go to the WAN/Internet section.

   

4. Set the connection type to L2TP/L2T and dynamic IP (if available).

   

5. Specify the login and password issued by the provider (written down in the contract).

   

6. Enter the host name, indicating the address tp.internet.beeline.ru, and select one of two values ​​- PPTP or L2TP.

   

7. Check the operation of the router: just enter any website and see if it loads or not.

Attention! To ensure proper operation, before starting setup, remove the connection type that was previously used.

Launching Wi-Fi for ASUS RT-N12

1. We launch the browser and enter the standard numbers 192. 168. 1 and enter the password indicated on the back of the router box (admin, admin).

   

2. Go to the Wireless Networks section called wireless.

   

3. Next, in “SSID” we indicate the name that you choose yourself. To protect your data, use strong passwords with English letters and numbers (you can also use capital ones). Save.

   

4. Network authentication – WPA Personal.

   

5. Write your password and confirm it again.

   

6. To fix changes made, click "Save".

   

If you have completed the steps correctly, you can start using the Internet.

Setting up a router for Beeline: TP-Link

Important! Before you start the installation, check the type of connection (in the IPv4 properties the connection must be set to accept the IP address and server automatically!). Otherwise, this may cause network errors when you continue connecting to the Internet.

Connection procedure

1. Open any browser, enter 192.168.

   

2. We write down the login and password specified by the manufacturer.

   

3. Open the “Internet/WAN” section.

   



4. In the “Connection type” line, indicate L2TP/Russia L2TP.

   

5. We register the login and password issued by the provider (specified in the contract).

   

6. Our host name is tp.internet.beeline.ru.

   

7. Check the operation of the router by clicking on any link.

Setting up a router for Beeline: D-link DIR-300

If you look at the router from the back, you will see 4 yellow holes and one blue hole (for the Internet). Insert the wire from Beeline into the blue port, and connect the wire to the PC into the second one. With its help we will configure the router. Next, extend the antennas and connect the router to the Network.

Important! Before starting installation, check the type of connection (in the IPv4 properties, the connection to obtain an IP address and server must be specified automatically!). Otherwise, this may cause problems with your future Internet connection.

Connection procedure

1. Enter 192. 168. 1 in the browser.

   

2. We write the name and password specified by the manufacturer on the back panel of the router.

   

3. In connection types, select L2TP.

   



4. Fill in the server name by entering the address tp.internet.beeline.ru.

   

5. Uncheck the “Without authorization” and “Enable RIP” checkboxes.

   

Next wi-fi settings

Setting up Beeline Internet: home router

For a home router, Beeline recommends all models of Smart Box routers. Their distinguishing feature is speed, number of holes for USB and range (can range from 2.5 to 5 GHz). Setting up such a router will be even easier thanks to the connection device. During installation, you will only indicate your region of residence and the name of the locality, and everything else will be configured automatically.

Connection procedure

• connect the Internet cable to a special port (it will be marked in a different color, there is only one);
• We connect the PC to the router with a small wire that will be included with the device.

1. Open any browser and enter 192.168.1.1. Click Continue.

   

2. Enter the standard login and password admin, admin.

   

3. From the main menu, select Quick Setup.

   

4. In the “Home Internet” section, enter your username and password in the appropriate fields specified when concluding the agreement.

   

5. As a preliminary key, we come up with a name and password, which will contain at least 8 characters.

   

6. Click "Save".

   

Important! Before checking the Internet, reboot your router.

Video tutorial on setting up a Smart Box router

If you follow all the instructions, you can do it yourself and quickly. If something doesn't work, try again or call a specialist.

Video - Setting up Wi-Fi router ASUS RT-N12 for Beeline

The latest model of wireless equipment from the Beeline operator is equipped with a more powerful signal transmitter, which also now operates in two bands - 2.4 GHz and 5 GHz, which allows you not to worry that some device will not be able to. The advanced processor ensures maximum reliability of the Wi-Fi signal throughout the entire area of ​​the apartment or house.

The device has the following advantages:

• 802.11n standard, supported by most devices;
• maximum transmission speed – 300 Mbit/s;
• Digital TV connection supported;
• modern design that does not spoil the interior;
• convenient interface for .

The 4G router provides network access at speeds of up to 74 Mbit/s. The kit includes a SIM card that allows you to use 30 GB of Internet per month. Subscription fee is 1200 rub. Valid at night unlimited connection to the 4G network.

Connecting and setting up a 4G/WiFi router

Connecting the router is very simple - you just need to connect the power cable to the Power connector, and the Internet cable brought into the apartment needs to be plugged into the WAN port. To connect the device to the network, you also need to connect the computer to the device by plugging the cable into any of the LAN connectors. The 4G router connects to the computer via a USB connector.

The setup is as follows:

When the router establishes a connection, the message “Internet connected” will appear in the “Status” line. This completes the setup and you can use the wireless network.

Setting up a 4G router is done in the same way.

Software update

The operation of the device is ensured by its firmware, which should be updated in a timely manner to prevent malfunctions in the functioning of the router. The firmware must be updated carefully, and if something goes wrong, you will have to restore the device to a service center.

The 4G router firmware is not updated.

Today everyone uses cable Internet, including at home. If at your workplace you have everything set up and don’t need to think about the settings, then at home you’ll have to think on your own, especially if you use a switch. To save your time, we will give step-by-step instructions for setting up all types of routers supported by the Beeline operator.

The options for setting up your router will depend on the model, firmware, and even the city in which you live. The operator himself admits this. First, let’s look at what types of routers your provider’s connection generally supports.

So, the official website contains a list of equipment that can work in the native network, which is relevant and can work, but requires updating.

Modern types of routers for the company: Beeline Smart Box Pro, Beeline Smart Box, Zyxel Keenetic Ultra, Beeline Smart Box One. If you open specifications branded equipment, then we will see that TP-Link DIR300 and DIR615 are hidden underneath it. Very common models among fixed-line operators.

Models that can work, but are obsolete: Beeline D-150L, ​​Beeline N-150L, ​​Asus (Asus 520-GU, Asus RT-AC51_U, Asus RT-AC58_U, Asus RT-AC66_U, Asus RT-AC68_U, Asus RT- AC87_U, Asus RT-AC88_U, Asus RT-AC_3200, Asus RT-AC_5300, Asus RT-N11-P, Asus RT-N12, Asus RT-N14_U, Asus RT-N16, Asus RT-N65_U, Asus RT-N66_U), D-LinkDIR-300NRU (revisions B1-B3, B5, B6, C1), Linksys WRT_610n, TP-Link (TP-Link_Archer C2, TP-Link_ArcherС7, TP-Link_ArcherC9, TP-LinkArcherC20, TP-Link ArcherC60, TP-LinkArcherC1200 , TP-LinkArcherC3150, TP-LinkArcherC3200, TP-Link TL-WDR_3500, TP-LinkTL-WDR_3600, TP-LinkTL-WDR_4300, TP-LinkTL-WR_840N, TP-LinkTL-WR_841N/ND, TP-LinkTL-WR_842ND, TP- LinkTL-WR_940N, TP-LinkTL-WR_941N/ND, TL-WR_1042ND, TL-WR_1043 / TL-WR_1043ND, TL-WR_1045 / TL-WR_1045ND), Zyxel (ZyxelKeenetic, ZyxelKeenetic II, ZyxelKeenetic III, ZyxelKeenetic 4G, Zyx elKeenetic 4G II, ZyxelKeenetic 4G III, ZyxelKeenetic Air, ZyxelKeenetic Extra, Zyxel Extra II, Zyxel Giga, Zyxel Giga II, Zyxel Giga III, Zyxel Lite, Zyxel Lite II, Zyxel Lite III, Zyxel Omni, Zyxel Omni II, Start, Start II, Ultra II, Viva) and Beeline Wi-Fi router.

The communications company made sure that its subscribers did not look for versions to download new firmware and posted these files on its official website with step-by-step instructions and pictures: https://moskva.beeline.ru/customers/pomosh/home/domashnij-internet /nastrojki-s-routerom/beelinesmartboxpro-weblogin/ .

Models that are physically outdated and require updating are no longer supported:

• Asus (RTG32IPoE, RTN10, RTN10LX(RNN10E), RTN10U, RTN11, RTN13U, RTN15, RTN15U, RTN53UIPoE, RTN56U, WL500gDeluxe, WL500gPremium);
• D-Link (DI804HVIPoE, DIR100, DIR300 with a light interface, DIR300 with a dark interface, DIR-615 IP oE, DIR628, DIR632, DIR645, DIR655, DIR815, DIR825, DIR855);
• Linksys (E1000IPoE, E1200IPoE, E1500, E3200IPoE, E4200IPoE, EA3500IPoE, EA4500IPoE, EA6500IPoE, WRT54GIPoE, WRT120N, WRT160NLIPoE, WRT320NIPoE);
• Netgear(JWNR_2000IPoE, WNDR_3800, WNDR_4000IPoE, WNDR_4500IPoE, WNR_612IPoE, WNR_1000IPoE, WNR_2200IPoE, WNR_3500LIPoE);
• TP-Link (TLMR3220IPoE, TLMR3420IPoE, TLR460IPoE, TLR860IPoE, TLWR340GDIPoE, TLWR543GIPoE, TLWR642GIPoE, TLWR741NDIPoE);
• Trendnet (TEW-452BRPIPoE, TEW-634GRU, TEW-639GRIPoE, TEW-651BRIPoE, TEW-652BRPIPoE, TEW-673GRUIPoE, TEW-691GRIPoE);
• Upvel, Zyxel (NBG318S-EE, NBG334W-EE, NBG460N-EE).

It is noteworthy that for absolutely each of the listed models on the website there are instructions, regardless of whether the model still works with the Internet from Beeline or not.

Connection setup

1. First, let's pick up the router and examine it. In the location of many connectors we find a blue port (if it is colored), the so-called WAN, if you don’t know what it is, then it is signed. You will need to plug in the main cable from the Internet running around the apartment (twisted pair, crimped at the end).
2. There we also find a LAN port on the switch. In any of them we install the cable that comes with the equipment. The opposite end of the cable ends at network card your computer. As a rule, there is only one connector that will suit you, so it is difficult to make a mistake.
3. Turn on your computer if you haven't already and go to the Start menu. There we go to “Control Panel” - “Network and Internet” - “Network and Sharing Center” - “Manage network connections” - “Change adapter settings” (left).
4. Next, from several networks that appear, select a local connection with the right mouse button and open “Properties”. You need "Internet Protocol Version 4".
5. In the window, select active checkboxes for two parameters: automatic IP and DNS. Save the settings. In the browser, type your IP address, which is indicated on the Beeline router itself. As a rule, the login, password and address are indicated on the back of the equipment.
6. Now go to the router menu in the section for connecting to the Internet.
7. We need the “WAN connection type” column, select “l2tp”, IP and DNS automatically (as on a PC).
8. In the server we enter the settings from the official Beeline website: TP.INTERNET.BEELINE.RU. The parameters for authorization must be specified in the paper contract. Save the changes and restart your computer.
9. Now, in the same place in the router menu in the “Wireless Networks” section, enter free values ​​to indicate your Wi-Fi network (SSID), then the network protection method ( WPA-2 Personal), encryption type (AES/TKIP) and key (at least eight characters). Save the changes and test on any device that supports Wi-Fi ( tablet, laptop, smartphone), whether your network is detected.

What do you need to know before setting up your router? If you previously had a router installed on another computer, or you have also done some manipulations with it, then one of the recommendations would be to reset all current settings. This can be done using the small “Reset” button on the equipment panel. You can’t just press it, you’ll need a paper clip or a needle. This is done specifically to protect against external intrusions.

The above step-by-step instruction according to the switch configuration can be modified, some stages can be swapped, the main thing is that the overall goal is achieved.

Why may the device not work after these manipulations?

Algorithm for Asus

1. Connect two cables to the WAN and LAN ports, turn on the router and computer, and pull out the antenna from the router.
2. Open your usual browser on clean slate and enter the IP in the address bar: 192.168.1.1.
3. Next, use admin/admin to fill in the free login and password parameters.
4. In the WAN section, select the connection type l2tp or l2t+dynamic IP.
5. Enter the authorization parameters assigned specifically to your contract.
6. Specify the host name and pptp/l2tp as follows: tp.internet.beeline.ru.
7. Save the previous settings and check if it works.

Algorithm for Asus RT-N12 version

1. Log in to the wireless network.
2. Indicate the name of your connection for Beeline in the SSID arbitrarily.
3. In the authentication line, select “private”
4. Create a password and save it.

Algorithm for the TP-Link model

1. Enter IP 192.168.1.1 in the address bar.
2. Login and password are standard: admin/admin.
3. In the WAN or Internet section, select MTU – 1460 and connection type l2tp, or l2tp Russia.
4. Enter the registration data according to the details of your contract.
5. The following is the Beeline server: tp.internet.beeline.ru.
6. Check the functionality of the connection.

Algorithm for D-LINK DIR300 router

1. Fill in the l2tp connection type.
2. In the empty user name/password fields, enter the data issued specifically for your connection.
3. Fill in the standard Beeline server: tp.internet.beeline.ru
4. We remove the “poke” from “Enable RIP” and “without authorization”.
5. We put a “poke” on the automatic connection.
6. We find the “Miscellaneous” section and check the box next to “NAT” and “Firewall”.
7. Let's save.

Problems when working with Wi-Fi equipment

The most common problem when working with a router is, of course, closed access to the outside global network. If a normal reboot of your model does not help, then check the integrity of the cable and reinstall the plug in all connectors. The most undesirable solution is to reset the settings to wireless device. There is nothing bad about it, but you will have to configure everything again according to the instructions. Also, one of the reasons for non-functioning equipment may be incorrect authorization, that is, an incorrect password or login. If the registration details are correct, then check your balance. In principle, information on negative balance should appear in the browser when you try to connect, but it’s still worth checking again. In the latter case, Internet access will be closed even with a direct connection ( without a router).

In order to diagnose your connection, you can use the service posted on the Beeline website: https://moskva.beeline.ru/customers/pomosh/home/domashnij-internet/samodiagnostika/.

Follow all the prompts in order and at the end the reason will be found, then use the “Troubleshooting” section there. If nothing helps, then perhaps you missed an update on the site and your firmware is out of date, or your router is broken. To call a specialist, use the single contact number 0611. If the problem ends up on the operator’s side, the call will be free, but if the obstacle was on your side, then you will be given a price according to the region for the service call.

In general, setting up a wireless network and the router itself does not require any special technical knowledge. You just need to carefully follow each step of the attached instructions. It may differ slightly depending on the router model used, but in general the essence will be the same everywhere. After each entered setting, always save your settings and do not forget to restart your computer and router periodically. The last manipulations will significantly save your nerves and time. Don't be afraid to contact the service technical support Beeline, there are specialists working there who face the same problems every day, only they will be able to give you up-to-date information on problems on the network and then, perhaps, the connection issue will not be resolved by you.