After the fall, the camera films blurryly. Why has the camera on Android become worse? Google Goggles example
When taking regular photos with your smartphone in order to capture some events as a memory, you don’t really want to end up with blurry photos! And if something like this happened, then, knowing and remembering the true capabilities of the camera of your device, indignation at the current situation can drive you crazy - the moment is lost, and only low-quality images are from your memories. This is really unpleasant! The moment, of course, cannot be returned, but the smartphone camera is not lost yet. Simple cleaning of the camera will allow you to use it again, getting high-quality pictures at the time you need!
In the vast majority of cases, blurry photos from a smartphone camera are not an obsolescence of technology. This is a banal entry of dust into the body of the device. This is what causes the quality of photography to deteriorate. Therefore, turn your smartphone with the camera towards you and carefully inspect to see if there are dust particles there. If yes, then feel free to start cleaning. Believe me, the result will surprise you.
Why is there dust in the smartphone camera?
The answer is banal to the point of impossible! All due to the loss of the seal of the housing! And we shouldn’t blame smartphone manufacturers for this. They do everything wisely. The ingress of dust into the body of a new phone from the counter is practically zero. Deterioration of tightness appears during the operation of the equipment. More precisely, as a result mechanical influences to device:
- falls, blows;
- frequent opening of the case;
- And so on.
These factors serve as the primary source of cracks through which dust particles can get inside the smartphone. Including the camera.
Cleaning the camera from dust
Let's look at the Lenovo P780 as an example. At one time, this phone fell into the water and was completely disassembled to dry completely. Subsequent assembly of the device was completed with defects. And after about six months, the smartphone camera was simply depressing with the quality of its images. The image below is a blurry photo from a smartphone camera.
To work you will need screwdrivers, cotton swabs and alcohol. Alcohol wipes, which are sold in every pharmacy, may also come in handy.
Turn off the phone and film back cover, remove the SIM cards and memory card.
Next, unscrew the screws securing back housings. So we got to the camera
Using cotton swabs soaked in alcohol and alcohol wipes (if available), clean the camera itself and protective glass from pollution.
This completes cleaning the phone camera. We assemble the smartphone and inspect it externally.
There should be no cracks or gaps left, otherwise this event will have to be repeated in the near future.
And finally, below is a photo taken on the phone after cleaning the camera:
Does your camera take bad photos? There can be quite a lot of reasons for this, and they depend on the type of camera, its possible problems, and on the usual “human factor”. In this article we will try to understand the main reasons why a camera may take poor photographs in a given situation.
Does your camera take bad photos? There can be quite a lot of reasons for this, and they depend on the type of camera, its possible problems, and on the usual “human factor”. In this article we will try to understand the main reasons why a camera may take poor photographs in a given situation.
Why does the camera take bad photos?
To begin with, you should clearly define the concept of a poorly photographing camera. As a rule, amateurs face the following problems when shooting:
- The camera takes poor photographs, giving a blurry image, a “picture” with big amount noise or incorrect color rendering.
- The camera takes a picture, but the image is out of focus and appears blurry.
- The device does not turn on.
- The camera display shows an error and no shooting is possible.
- The device takes photographs as usual, but it is not the subject that is being photographed that is sharp, but the foreground or background (found in SLR cameras).
So, there are not so many main types of camera malfunctions, and it is these mentioned “symptoms” that we will consider:
- The first case, in 99 percent of cases, does not indicate a hardware or system malfunction, but a failure in the camera settings. This could be an accidental switch to another shooting mode, resetting the white balance setting, or an increased sensitivity value (ISO). In this case, we recommend that you carefully study the instructions for the camera and set the necessary settings or switch to automatic shooting mode (it usually sets the best exposure parameters for a particular shooting situation). If the settings are set correctly, you can try to reset all camera settings to factory settings (this function is available in the menu of most digital cameras).
- An out-of-focus image when shooting can be due to either a mechanical problem or a misconfiguration. When this symptom appears, you should immediately check whether the macro mode in the camera or manual focusing is turned on. Most often, in compact cameras, macro mode activation is placed on a separate button and can easily happen by accident. This can also be determined by the macro mode icon glowing on the screen in the form of a stylized flower. You can also try to “play” with the focus area settings, setting the maximum “wide” coverage value or, on the contrary, the spot mode, and then see if there are any changes. If all operations are completed, then there is a risk that the reason that the camera does not take good pictures is still a mechanical malfunction.
- If the camera does not turn on, the cause is often a mechanical fault. It may be caused by dropping the camera or getting wet. Still worth checking out battery cameras (it is advisable to insert a guaranteed working battery) - often it is the failure of the battery that can lead to the fact that the camera does not turn on.
- The appearance of errors on the screen often accompanies various breakdowns. In the case of a DSLR, a similar message often appears when the shutter fails. If the error does not disappear and there is no access to the camera menu, the direct path is to service center. If the error is temporary and does not always appear, then you can try to reset the settings and replace the memory card; it is likely that the problems are related to how the device reads it.
- In SLR cameras main problem is the presence of so-called back or front focus, that is, when the camera is in automatic mode focuses closer or further away from the subject being photographed. It is possible to combat this phenomenon with the help of adjustment. It is recommended that this be done at a service center, although many forums have instructions for self-adjustment of some cameras. This phenomenon is also often observed when using third-party optics, for example, when using Sigma, Tokina and others lenses on Canon cameras.
Conclusions about why the camera takes bad photographs
As you can see, there are not many reasons for camera malfunctions. In this material, we did not consider problems that arise with the memory card, but they are the most common. As a rule, they manifest themselves in partial recording of captured frames, errors during saving and other signs. The easiest way to check your guess is by installing a new or guaranteed working drive. Otherwise, the above symptoms of a camera malfunction and methods for solving them allow you to navigate in most cases.
Enough a large number of Direct owners of Samsung smartphones, after one week of using the phone of this model, encountered a problem in the form of camera failure. When you enable it, an error occurs. Camera failure on Samsung is quite common, so this factor must be taken into account. Problems with the camera on the mentioned devices will be discussed in more detail below.
In order to prevent camera failure on Samsung, you are given 4 ways to fix this error with your own hands.
Method number 1: data cleaning
This method, like its other analogues, is simple and does not require anything supernatural. It consists of clearing data, as well as freeing up the internal storage of this camera. The camera failure on the Samsung Grand may be due to its overflow.
The first step in this situation is to restart your smartphone. First of all, you need to turn it off and then turn it on. This procedure is simple, and the user can solve it independently.
Next, you need to go to settings, and there you will find the application manager. As you remember, you need to find a camera. Opening this application and we clean up garbage, uninteresting photos and other material.
Next, you need to restart the gadget again and see if the problem with the camera is resolved. If you have decided, then we congratulate you, and if not, then see the next way to solve this problem.
Method No. 2: Cleaning the internal storage
A camera failure on a Samsung is bad, so it’s better to fix this problem as soon as possible. The second method is to clear the internal storage in the Camera application. recovery method. Just like the previous method, let's look at all the details step by step.
First of all, you need to turn off your device. Next, you need to press and hold on certain time three buttons on your phone. These buttons are:
- A button that is responsible for turning it on and off.
- A button called Home.
- And the phone volume up button.
When you press these buttons for a few seconds, the phone will present the Android system parameters to your attention.
In order to clean your device, you need to scroll through the lines using the volume buttons. To go down, use the volume down button.
You need to find a line called Wipe cache partition. Next, your task is to restart the device.
If the camera failure on the Samsung Grand Prime has stopped, this is good, but if not, then you should turn to the next method.
Method number 3: file manager
This method also involves cleaning the material, but in a different way. In this case, this method aims to eliminate the camera failure on the Samsung Galaxy and is as follows. We resort to using a file manager.
- The first step is to connect the device to your computer using a USB cable.
- You need to find and open the memory folder of this smartphone, and then go to the “Android” folder. There will be another folder with dates. This is exactly what you need.
- There you can find the archive folder, where your smartphone’s cache will be stored. You will need to remove it.
- Experts in this matter advise deleting all files from this folder, since they are completely useless on your device and only cause memory problems.
- After you complete your action, you need to restart your device. We hope this method helped you troubleshoot, if not, then move on to the last method.
Method number 4: removing an alternative camera
This last method, which can help you prevent camera failure on Samsung.
This method also involves removing it, but this time the so-called alternative camera is removed.
Your task is to find all the applications that use the camera services, and once you find them, your task will be to remove them. After this action, be sure to restart the smartphone.
One of the above methods will certainly fix the problem with the camera, and it will continue to perform its job efficiently. If nothing helps, you must definitely contact a service center - this means the problem is much more serious.
The use of smartphones is becoming increasingly popular, thanks to the reduction of such a strong difference between professional cameras and small modules that are installed in your gadget. Of course, you can’t compare them, but sometimes watching a video shot on a smartphone produces much more impressions than on an expensive camera. In addition, there are plenty of photos taken on smartphones on the Internet that are nominated for various awards. After all, it doesn’t matter what quality your camera is, the main thing is the ability to turn the most ordinary scene into a masterpiece.
But not getting a masterpiece means:
The “soap” in the photo can often be caused by a dirty camera glass, as well as a protective layer that can get scratched over time. You can remove it with toothpaste and a brush. But the problem with a dirty lens can be solved with an ordinary rag.
Flick
Have you asked a friend to take a photo of you standing with a star? The result is a fuzzy and blurry photo. The reason was the trembling hands of a friend, who, just like you, in confusion, began to jerk the camera and incomprehensibly “tap” on the screen, without thinking about the quality of the picture itself. Remember, the main thing is to keep your hands still. Blurry photos are most likely to appear at night.
Ghost rider
Did you take a photo of a fast object, a running person, or a “flying” sports car, but in the photo the object turned out fuzzy and smeared? It's all about the lighting. Try to take the photo in daylight, bright light. Moreover, the cameras Low quality handle such scenes, as a rule, much worse than more expensive competitors such as Galaxy Note 4.
Fuzzy object
A lot of users encounter this. The main reason is incorrect focusing. In this case, the camera focuses on objects located behind. There is a way out of the situation: buy a smartphone with a camera that has improved focusing, for example, a laser one; before taking a picture, play it safe and touch the object that you want to see best in the photo; use a program focusing mode, for example, the Xperia Z3 has one: you take a photo, then focus on the object of interest to you.
