How to open an iPhone to insert a SIM card. What SIM card do you need for iPhone? Will a regular SIM card fit into the Micro SIM slot?

None will work without a SIM card mobile phone. Or rather, he will work, but do his job main function- No. Given the variety of SIM card slots and formats, it is important to know how to insert a SIM card into an iPhone. There is nothing complicated about this, but some points require clarification.

Note that modern smartphones (especially iPhones) are undemanding to this process. For example, old Nokia phones in this regard were incredibly difficult. I had to worry a lot and look for a slot where to insert a SIM card. Everything in the iPhone is provided for the convenience of the user: there is no need to remove back cover, and the kit even comes with a special tool for removing the tray. However, the tray itself was not invented by Apple. The same Nokia company was the first to implement a removable tray. But this is a past story, and we will move directly to the question itself.

Types of SIM cards

First of all, please note that different iPhones use SIM cards of different sizes. The third generation of Apple phones worked with regular-sized SIM cards. Then the fourth generation of phones appeared, into which you could only insert Micro cards Sim. Further, the fifth, sixth and seventh generations only work with Nano Sim cards.

All these cards differ from each other only in size: width, length, thickness. Therefore, when purchasing a starter pack, it is important to check with the seller so that he sells the card in the size you need. Some starter packages come with cards of all sizes at the same time: that is, there are special bending lines along which you can break out a card for your phone.

Will a regular SIM card fit into the Micro SIM slot?

During the shortage of Nano and Micro SIM formats, people did not know how to insert a regular-sized SIM card into an iPhone, but they still found a way out. They simply cut a regular large SIM card to the required size and inserted it into the phone. Even the metal contact had to be cut off. Surprisingly, it worked and the phone perfectly received the signal from the desired operator. Even today, a regular standard sized generic SIM card can be cut down to Nano or Micro SIM size and it will work.

But there is no such need now. Operators sell SIM cards of all sizes. And if you still have old sim card large size, and you bought a phone where it does not fit, then in any salon mobile communications They will replace it with the size you need. In this case, you don’t need to know how to insert a SIM card into an iPhone. They can even do this in a store, and you just have to watch.

Installing a SIM card

So, how to insert a SIM card into an iPhone? In the box, the phone always comes with a paperclip (it is also called (iScrepka), with which the tray is opened. This paperclip can be noticed by something else: a pin, a needle, nail scissors, even a toothpick. But this can simply damage the tray. It is located with right side (on the side of the phone).

We take our paperclip, insert it into the hole of the tray (a very small hole), press down a little, after which the tray will come out a few millimeters. Then simply remove it completely with your hands.

When you have the tray in your hands, place the SIM card in it. It is important that it is placed with the chip facing down, otherwise the card will not work. Although the tray is designed in such a way that it is impossible to insert a card in any other way, some users manage to do it.

Now we insert the tray with the SIM card back into the slot and press it down a little.

Settings

Now we know how to insert a SIM card into an iPhone, but what to do next? Important: it is not necessary to turn off your phone. Previously, you had to remove the battery and only then insert the SIM card, but now there is no such need.

Once the SIM card is inside, the phone will ask you to unlock it. It is normal that it is blocked by default. To do this, you will need to enter a PIN code. You must know this code (it is indicated on starter pack), but if this is your old card, then you already know it for sure.

We enter the PIN code, the lock is removed and the phone finds the desired network. If the network cannot be found, then in the settings there is an “Operator” item. There you can select the operator to whom the card belongs. The default option is “Automatic”, and in this position everything should work fine. But there are also exceptions. Therefore, just select your operator and the phone will immediately find the network. But if problems arise and you still don’t know how to insert a SIM card into the iPhone 5S, then move on to the next point.

If the SIM card is not detected

If, after performing the manipulations and even selecting an operator, the phone writes: “No network,” then this means that you inserted the card incorrectly or the SIM card is not working. But it can be even worse: this is when the phone is tied to another operator and can only see its SIM cards.

Yes, it's unpleasant, but there's nothing wrong with it. They learned how to remove a lock a long time ago, so special slots for iPhones are sold on radio markets, with which even a locked phone will work with any operator. Such a tray is inexpensive - about 150-200 rubles. The kit includes the tray itself, a special chip spacer for the SIM card, and a paper clip.

This article describes in as much detail as possible how to insert a SIM card into an iPhone 6, but these instructions are valid for all models.

Articles and Lifehacks

If we purchased a smartphone from Apple, we will not need to remove the back cover and battery at all in order to install a SIM card.

Our article today will tell you how to insert a SIM card into an iPhone 6, as well as the features of its format in the new generation of Apple mobile devices.

How to cut a SIM card

  • It is well known that Apple has already patented a system for automatically ejecting the SIM card tray, but it has not been implemented in the new smartphone.
  • The user is still asked to use a special paperclip included in the package (which is not always convenient, given that you need to carry it with you).
  • However, for security reasons, it is allowed to remove the SIM card only after passing a special identification procedure (for example, using a fingerprint read by a fingerprint scanner).
  • Let's start with the fact that the iPhone 6 supports a nano-SIM SIM card (like the iPhone 5). You can make it from the most ordinary SIM card, cutting it to the required size. It measures 12.3 x 8.8 millimeters and is 0.67 millimeters thick.
  • For cutting yourself, you will need scissors, a stencil, a compass and sandpaper. At the same time, it is very important to strictly adhere to established sizes, otherwise the SIM card may be damaged.
  • Sandpaper will help remove the thickness, and scissors will help trim off excess edges. In addition, you can purchase a special machine for cutting SIM cards (you can easily order it online).
  • Let us add that if we are afraid of damaging the SIM card, then it is better to take it to any nearest communication store, where specialists will help to cut it.

Insert the SIM card into the device

  1. The device has a special tray for installing a SIM card. It is located at the end of the smartphone on the right side. To pry it off and open it, we need a paper clip that comes with the device.
  2. Instead, you can use a paper clip or other handy tool.
  3. Once we have removed the tray, we place the SIM card there and carefully push the tray back. A slight click should be heard at the end.
  4. After we install the SIM card, we can proceed to the initial setup of the mobile device. Let’s add that before installing the SIM card, you don’t need to turn off the iPhone like other devices.

An iPhone is, first of all, a phone with which users make calls, send SMS messages, work with social networks through mobile internet. If you purchased new iPhone, the first thing you need to do is insert a SIM card.

You probably know that SIM cards have different formats. Just a few years ago, the most popular option was a standard (or mini) size SIM card. But in order to reduce the area that it will be placed in the iPhone, the format has been reduced over time, and today the current iPhone models support the nano size.

The standard-SIM format was supported by devices such as the first generation iPhone, 3G and 3GS. The popular iPhone 4 and 4S models are now equipped with micro-SIM slots. And finally, starting with the 5th generation iPhone, Apple finally switched to the smallest version - nano-SIM.

Insert the SIM card into the iPhone

From the very beginning, regardless of the SIM format, Apple maintained the same principle of inserting a card into the device. That's why these instructions can be considered universal.

You will need:

  • A SIM card of a suitable format (if necessary, today any mobile operator replaces it immediately);
  • A special paper clip included with the phone (if it is missing, you can use a paper clip or a blunt needle);
  • Directly the iPhone itself.


If you did everything according to the instructions, but the phone still shows the message "No SIM card", check the following:

  • Correct installation of the card in the smartphone;
  • The performance of the SIM card (especially if you cut the plastic to the desired size yourself);
  • The functionality of the phone (a much less common situation is when the smartphone itself is faulty - in this case, no matter what card you insert into it, the operator will not be detected).

Inserting a SIM card into an iPhone is not difficult - see for yourself. If you have any difficulties, ask your questions in the comments.

In the iPhone, Apple's world-famous device, all elements harmoniously coexist with each other. And the functionality of these devices amazes the imagination of the most sophisticated user. Any phone model from Apple, be it iPhone 3, iPhone 4S, SE, 5C, iPhone 5S, 6S, 7 and many others, each of them is endowed with a wide variety of convenient functions that are improved from version to version.

Despite the ease of use of Apple devices, some users, when they first pick up a device called iPhone 3, iPhone 6, 5S, 7 or any other model, are lost and cannot understand how to insert a SIM card into the device.

In fact, inserting a SIM card is very easy. You just need to know the algorithm of actions and strictly follow it.

The manual below explains in detail how to insert a SIM card into an iPhone 5S. Where to insert the SIM card and other questions are covered in this instruction.

Any device from Apple, not only the 5S smartphone, but also other phone models - iPhone 3, 4, 6, 7, etc. before the beginning active work need to be prepared. And only after this can you worry about the question of how to insert a SIM card into the iPhone.

So, the first thing you need to do is:

  • Make sure that your iPhone - be it 3, 4, 5, 7 or any other - is not locked due to a change in carrier. A large number of gadgets from Apple are blocked to a specific communication company - communication service provider. And if your goal is to switch to another company, you will need to unlock the SIM slot.
  • If your device (3.4.5, etc.) is not locked, everything is fine and no preparatory procedures are required. You can insert a SIM card into your iPhone without any problems.

How to insert a SIM into iPhone 5

Now let’s look at the main question - how to insert a card into an iPhone 5. By the way, the information that will be given below will also be useful for those who do not know how to insert a SIM card into an iPhone 4.

In addition, the instructions will answer the question of how to remove a SIM card from an iPhone. To do this, you just need to change the order of actions and perform all the steps in reverse order.

Now let’s take a step-by-step look at how to correctly insert a mobile operator card into the iPhone 5. This simple process involves the following user actions:

  • The device must be turned off before opening the slot. To do this, you need to press and do not release the power button of the smartphone for some time (several seconds). When an inscription appears on the display calling you to turn off the device, you need to slide your finger over the button and the device will immediately turn off.
  • After turning off the device, you need to place the thinnest end of a special spatula into the slot and remove the card tray with a pressing motion. There will be a recess for the SIM card where you need to insert it.
  • Insert the card so that the golden contacts are directly at the bottom.
  • Push the tray back in.
  • Check the side of the phone to make sure the tray goes in all the way.

Reference. In recent years, SIM cards have begun to be produced in slightly different formats than before. Now they are going much further smaller size. This causes some difficulties, since older versions of iPhones are not designed for SIM cards of the new format - and vice versa.

Also note that all Apple phones have a SIM slot into which you can insert and, if necessary, remove a card from a particular operator. The inserted element is retrieved without problems. In some models, you can remove the SIM card using a special device that comes with the device. For most versions of gadgets, the SIM card slot is located on the side of the case and on its right side. Only in older models - version 3 - the card slot is located at the top, at the border where the front and rear parts housings. However, pulling out a card in all devices, as well as inserting it into a slot, is not difficult.

After all the steps described above, if you do everything correctly, when you turn on your iPhone for the first time, the device will connect to the network automatically. Now you can enjoy exploring the functions of the new gadget and try them out in action, as well as make calls and send messages to friends and acquaintances.

If you need to change the SIM card, you should remove it in the reverse order, i.e. perform all actions specified in the instructions, starting from the 5th.

Despite the fact that the release is just around the corner, Russians continue to willingly use Apple smartphones of the 4th and even 3rd modifications. The prices of these devices, due to their obsolescence, have dropped significantly - now even an unemployed student can afford to buy an out-of-date device with the coveted “bitten apple”.

However, due to the fact that the showcases Russian stores They are full of iPad models and different generations, causing confusion with SIM cards. It can be difficult for buyers to remember what type of SIM card is installed in a particular Apple device. Our article will once and for all eliminate the uncertainty in this matter.

There are 3 types of SIM cards for iPhone: mini-Sim, micro-Sim, nano-Sim.

Mini-Sim

Surely, a generation of users will soon grow up who have never seen a Mini-Sim (or a “large” SIM card). Smartphones that support SIM cards of this format, are still sold in stores - but these are, as a rule, outdated and unpopular models from little-known manufacturers.

Mini-Sim is installed in first generation iPhones, 3G and 3GS. Apple tablets do not support standard SIM.

It seems like it’s high time for Apple fans to forget about “large” SIM cards, but iPhone 3GS devices are still “in use” - despite the fact that they have a primitive set of functions and cannot even be updated to iOS 7.

Mini-Sim is convenient because it can be turned into a micro- or nano-Sim without any additional adapters, using simple scissors. Trimming allows the user to avoid the need to replace the card, a procedure that can lead to loss of contacts and other important information. There are instructions on our website.

Micro-Sim

It was Apple that gave birth to the fashion for using SIM cards of reduced size, placed in special trays - the development of micro-Sim was completed back in 2003. The release of the iPhone 4 caused serious confusion - until 2010, the general public did not know that SIM cards could come in different sizes.

Micro-Sim are used in iPhone smartphones 4 and 4S, as well as in iPad tablets, iPad 2, The New iPad (third generation) and iPad Retina(fourth generation).

Micro-Sim is a favorite among manufacturers because it makes it possible to save space inside the case. From a consumer point of view, Micro-Sim also has a number of advantages over Mini-Sim:

  • The Micro-Sim has more storage space for contacts.
  • The “small” SIM card has a number of additional security functions - it can be used to create a multi-level PIN code, as well as codes for individual applications.
  • Micro-Sim is capable of running multiple applications simultaneously. The user has the ability to transmit streaming data over 2 or more channels.

Micro-Sim can be turned into nano-Sim - if you very carefully “remove” all the plastic around the chip with scissors. You can also modify a Micro card into a regular one - for this it is recommended to use a special adapter.

Nano-Sim

Nano-Sim appeared in 2012 immediately after the release of the iPhone 5. The need to introduce a new type of SIM card was due to the fact that the 5th generation Apple smartphones turned out to be thinner than the iPhone 4 / 4S, and the company's developers were again tasked with saving space inside gadget body.

Nano-Sim supported iPhone 5/5S/5C, 6/6 Plus/6S/6S Plus, SE, 7/7 Plus, iPad 5th generation, iPad Air, iPad Mini, iPad Pro. There is no exact answer yet to the question of which SIM card is in the iPhone 8, which will be released at the end of 2017, but most likely the new generation gadget will also work with nano-Sim.

It is possible to enlarge a nano-Sim to micro- or mini-Sim sizes, again with the help of the adapters mentioned above. Adapters are usually sold in sets (for all replacement options at once) and cost mere pennies.

Now the problem is the distribution of maps different sizes is not significant. Providers cellular communications found an effective and creative solution to this problem: they began to produce transformable SIM cards.

A large card can be turned into a Micro by breaking off the plastic around the edges. If there is a need to use the mini-Sim again, just insert the Micro into a plastic frame - of course, provided that this frame was not sent to the trash bin, but was prudently saved.

Are there iPhones with dual SIM cards?

As of mid-2017 All mobile devices from Apple only support one SIM card. If a user is offered to buy a 2-SIM iPhone, he should refuse such a deal immediately - it is obvious that the device being offered is a cheap Chinese fake.

However, there are prerequisites that the situation will soon change and we will see an official 2-SIM iPhone. Information appeared on the famous Chinese microblog Weibo that Apple patented Dual technology back in July 2016 Sim Dual Active (DSDA).

A document released by the US Patent and Trademark Office states that new iPhone will receive 2 active lines. Therefore, the user will not have to switch between SIM cards - both will be available at the same time.

However, it is still premature to rejoice over the release of a 2-SIM iPhone - many experts agree that such a device will only be available in China. There are two reasons for this. Firstly, Chinese consumers really value multi-SIM devices. Secondly, Chinese market is strategically important for Apple, and the Apple company is ready to abandon its own principles in order to strengthen its position on it.

Apple SIM - what is it?

Apple SIM was introduced 3 years ago along with the iPad Air 2 and iPad Mini 3, but then tablets drew all the attention, and the SIM card from the Apple manufacturer undeservedly went unnoticed. Undeservedly, because this innovation is truly revolutionary!

What opportunities does Apple SIM provide? The owner of such a SIM card is able to switch between telecom operators and change the tariff without replacing the plastic itself. It looks like a utopia: I wanted to switch, say, from MTS to Megafon - I opened the menu and chose the appropriate tariff from the “green” provider; and no office visits or statements for you!

As you might guess, in real life everything turned out to be not so simple. The appearance of a universal Apple SIM was greeted by cellular operators with obvious disapproval - in particular, the largest provider Verizon refused to work with an Apple SIM card.

The fact is that the sale of SIM cards for providers is also a source of income. For example, domestic users mobile services They are forced to buy SIM cards with a balance of 100 rubles for 150 rubles. It turns out that operators “make” 50 rubles per SIM card “out of thin air,” and Apple deprives them of this opportunity.

There is another reason for providers’ dissatisfaction: they believe that the implementation of Apple SIM will harm sales of “locked” smartphones.

IN Russia Apple SIMs have been officially available since 2015, but Apple does not yet have agreements with any of the domestic operators. Russian users of universal SIM cards can only choose between 2 global telecom operators: AlwaysOnline and GigSky. The internet plans offered by both are outrageously expensive. Here tariff plans GigSky for Russia:

For 2 GB per month, the user must pay $50 - that’s almost 3 thousand rubles! Domestic providers ask for an amount 10 times less! Given such a monstrous difference in prices, it is not surprising that no one really knows about Apple SIM in Russia.

Conclusion

Apple is known for its passion for radical innovation - it was the company that developed micro-Sim and nano-Sim. At the beginning of the decade, users were “dizzy” from the variety of types of SIM cards - all three formations were in active use.

Now the situation has “settled down”: smartphone manufacturers have practically abandoned mini-Sim due to its large size. Modern gadgets support micro and nano SIM cards, and some support both at once. As for Apple, it has apparently decided on the size of the cards for the years to come - for several generations of Apple gadgets they have been working with nano-Sim.

Computer