Automatically turn on the computer after shutdown. TimePC program to turn off the computer on schedule
Automatic shutdown of the computer is an extremely useful option that will help you out more than once. Useful in cases where a PC or laptop is busy with a long process, and you have to leave. In this case, you can configure the computer to turn off - when desired operation completed, it will turn itself off. And you can safely go to sleep, go to work or do other things.
Most often, tuning is required if you:
- check your PC for viruses;
- convert video files;
- install a computer game;
- upload large files;
- copy important data, etc.
There are many options here, but the essence should be clear.
The first is using the built-in Windows tools. The second is using additional software. ABOUT the last way read here: . And this article describes all possible ways configure computer shutdown given time built-in Windows tools.
All the methods below are universal and work on Windows 7, 8 and 10. Therefore, no matter what operating system you have, you can schedule a computer shutdown in any convenient way.
Setting the computer to turn off automatically
The first method on how you can turn on the automatic shutdown of a computer or laptop is to use the "Run" section. For this:
The following window will appear confirming that everything is done correctly.
The number 3600 is the number of seconds. It can be anything. Specifically, this command will activate the automatic shutdown of the PC after 1 hour. The procedure is one time. If you need to switch off again, you must perform it again.
Instead of the number 3600, you can write any other:
- 600 - shutdown after 10 minutes;
- 1800 - after 30 minutes;
- 5400 - in an hour and a half.
I think the principle is clear and desired value you can calculate yourself.
If you have already activated the computer's self-shutdown and for some reason changed your mind, then call this window again and write the line shutdown -a . As a result, the scheduled automatic shutdown will be cancelled. If everything is done correctly, then the following message will appear.
Shutdown computer via command line
Another very similar method is through the command line. To enable this option:
If you suddenly change your mind about doing this operation, then open this window again and type - shutdown -a .
This command works only when you have already set the time to turn off the computer, but it has not yet arrived.
By the way, if this procedure must be performed regularly, then there is an easier way. To avoid opening the Run window or the command line, create a shortcut (for example, on the desktop). And in the Object Location field, write the following line C:\Windows\System32\shutdown.exe -s -t 5400(the number can be any). Click Next, then enter a name for the shortcut and click Finish.
Now, when you need to set the computer to turn off, just click on this shortcut. And this option is immediately activated (you will see a confirmation message).
For convenience, you can create another shortcut to remove the shutdown of the computer (suddenly needed). But here it is already necessary to write the following: C:\Windows\System32\shutdown.exe -a(no dot at the end).
Scheduled computer shutdown
And the last method is to turn off the computer by time through the "Scheduler". Suitable in cases where you need to perform this procedure regularly: daily, weekly, etc. In order not to constantly run the command line, it is enough to set the time to turn off the computer or laptop once and that's it.
To do this:
- Go to Start - Control Panel - Administrative Tools.
- Select Task Scheduler.
- In the right column, click on "Create a simple task".
- Enter a name that you understand - for example, "Automatic shutdown of the PC."
- Specify how often you need to perform this procedure (if once, then it is better to choose one of the methods automatic shutdown computers described above).
- Set up the shutdown of the computer or laptop (specify the start time and date).
- Select the first item - "Run the program".
- In the "Program" field, write shutdown , and in the "Arguments" field - -s -f (the -f switch forces programs to close in case they suddenly freeze).
- Click the Done button.
This is how you can set the computer shutdown time. In approximately the same way, daily or monthly adjustment is carried out. Some fields will be different, but there is nothing complicated there - you will figure it out.
What if you want to edit or delete this task? In this case, go back to the "Scheduler" and open the "Library" tab. Find your task here in the list (by name) and double-click with the left button.
In the window that opens, go to the "Triggers" section and click on the "Edit" button.
If you no longer need to turn off the PC on a schedule, then go to the "Library", select your task, right-click, and then - "Delete".
A few words in conclusion
In many modern programs there is a checkbox "Turn off the PC after the end of the procedure." Most often, it is available in those utilities that do their job for a long time - for example, disk defragmentation, checking a laptop or computer for viruses, etc.
Be sure to check the presence of this checkbox in each program. If it is, then you will not need to configure the PC shutdown by time. So much easier and more convenient. If not, then you will have to configure manually.
By the way, how to correctly calculate the time when you need to turn off the PC? Typically, programs show an approximate value when a particular procedure (virus scan or defragmentation) will be completed. Look at it and throw another 20-30% (or more) on top. In any case, your PC will be turned off before you wake up in the morning or come home from work in the evening.
Almost every user sooner or later wonders how to enable automatic connection to Internet Windows 7.
This manual is intended to answer all possible questions related to this topic. We hope you find it useful.
All actions, examples and screenshots in this material are relevant for Windows 7, as it remains the most popular today. But most of the operations, with minor amendments, apply to Windows 8 and 10.
Why start the Internet automatically
This setting greatly simplifies the process of using a PC. Do not waste precious time on unnecessary actions. Plus, situations are not uncommon when a person can miss important messages or letters for a rather annoying reason - he forgot about the Internet when turning on the computer.
Of course, installing a router will solve all these problems. The advantages of such a solution are also the fact that after that, not only desktop devices, but also other mobile gadgets will be combined into single network. All logins, passwords and other information are recorded in the memory of the router itself. In this case, even when changing the PC, most often there is no need to change anything.
Creation methods
There are many installation options. Still, the seventh and subsequent versions of the OS have a lot of different settings that allow you to adapt them to the most popular requirements.
Which way to stop, of course, everyone decides for himself. The user proceeds from his requests and capabilities. Also, a lot depends on the version of the update and the installed software. These factors can also influence the choice of option. But in any case, any of the following methods will work for you.
Video: Setting up automatic connection
Using network connections
Before starting all the actions, check that your names are written in Latin letters. In any case, it is undesirable to use Cyrillic in everything related to network settings. It’s better to fix and rename everything right away than to wonder why something doesn’t work the way it should.
To check, open the Network and Sharing Center. Next - "Change adapter settings". For renaming desired connection click on it twice, but with some interval.
All actions assume that you have already created a working connection.
If not yet, then the following steps will come in handy:
File extension .bat
It is quite easy and quick to set everything up using a special bat-file placed in the "Startup", which will perform all the actions for automatic connection.
For this:
Write the name of your file in any Latin letters without spaces and change its extension to ".bat". You should end up with something like "internet_autostart.bat".
If you cannot change the extension, then follow these steps:
Please note that if you search for this folder manually, then some of your names may be translated into Russian and, accordingly, look a little different.
This is where you need to move your bat file. Be sure to reboot and check if this method works. If something does not work, then just delete the file and try another option. The fact is that it does not work on all computers.
Network Control Center
Using only the "Network Control Center" you can achieve the desired result, but with one caveat. The computer in this case will join only at the moment when it is requested by any application. But, as practice shows, this suits the average user quite well.
So, go to "Change adapter settings" and open the properties of our connection. In the "Dialing Options" we put only one checkmark - "Request a name, password, certificate, etc.", the rest are removed.
Then it is desirable to make the following changes:
After some time after the reboot, a window will pop up asking you to select the desired action. Check the "Connect automatically" box here. And the problem should be solved. If you want more advanced methods, then read on.
Setting up automatic Internet connection Windows 7 with Task Scheduler
Before creating a task in the scheduler:
Actually, after that, you can proceed to the next step - open the "Task Scheduler".
You can do this in two ways:
- in the "Control Panel" open "System and Security", then - "Administration", there will be the "Task Scheduler" we need;
- press two keys on the keyboard: Win and R, in the window that opens, simply enter: “taskschd.msc”;
- further, in the "Action" menu item, select "Create a simple task" and write a name with a description. You can enter any values here;
- in the "Trigger" item, check the box "When the computer starts", in the "Action" - "Run the program";
- a window will open in which you will need to specify the location of the desired system process Raspidal. You can manually type "C:Windowssystem32rasdial.exe", or you can specify it through "Browse";
Note that the paths to necessary files yours may differ. It all depends on where the operating system in which you are currently installed is installed. But the principle remains the same for the most part.
- in the "Add arguments" field you need to enter the name of your connection, login and password received from your provider. These must be entered strictly in that order, separating them with only one space. Nothing extra should be there. You will get something like this: "INTERNET login password";
- at the end puts a checkmark "Open the Properties window after clicking the" Finish "button. Check "Run for all users" and "Run with highest privileges". And here at the very bottom you need to select your operating system. At this stage, you will have to enter the user password, if you have one set.
That's basically it. Try restarting your computer. If you did everything right, the computer will connect automatically.
Autorun with Registry Editor
Alternatively, you can set Windows 7 to automatically connect to the Internet through the registry.
To start:
We hope you found the information you were looking for in this article. In fact, there is nothing complicated here, even a novice user can easily figure it out.
Do not skip a single point, read carefully all the comments and comments, and then the result of your work will delight you without errors and failures for a long time.
>Today, there is a sufficient amount of software with which we can manage the automatic inclusion of a computer on a schedule. But I want to note that automatically turning on the PC using programs is possible only when it is in “sleep” mode.
That is, a computer that is in “sleep mode”, as it were easier to say, is already turned on. It just “wakes up”, but does not turn on.
It turns out (I was ashamed not to know this :)), you can set the computer to turn on automatically according to a schedule and even when it is COMPLETELY OFF! Modern BIOS, which are equipped with PC motherboards, have settings for automatically turning on a turned off computer according to a schedule.
At the dawn of my acquaintance with computers (since 1995), one could only dream of such a setting in the BIOS. For what purposes you can use turning on the computer on the machine, you decide.
For example, from the most banal - using a PC as an alarm clock, turning it on for distributing or downloading torrents during your absence, maintaining a computer, or even when you are at work or on a business trip, etc.
I note that the fourth computer I tested, bought 6 years ago, did not yet have such an opportunity. Let's now go directly to the BIOS settings.
How to enter the BIOS depends on the configuration of your motherboard, mainly by pressing the Delete or F2 key on the keyboard at the initial stage of booting the computer. You can view the hint on the necessary keys immediately when you turn on the PC.
AUTOMATIC POWER ON THE COMPUTER
BIOS American Megatrends Inc. P1.80, 05/20/2011. Go to the “Advanced” section and select “ACPI Configuration”.
We turn on the “Restore on AC / Power Loss” setting to the “Power On” position.
Activate (“Enabled”) the “RTC Alarm Power On” auto-on setting.
We choose to turn on the computer every day (“Every Day”) or on a certain date within the current month in the “RTC Alarm Date Every Day” settings. Set the PC turn-on time: “hour/minute/second” in “RTC Alarm Time”.
After completing the settings, press the F10 key or the item “Save Changes and Exit” and “OK” to save the settings and restart the PC.
BIOS American Megatrends Inc. V4.3, 21.10.2009. We need the “Power Management Setup” section, go to it.
Turn on the “On” position of the “Restore On AC Power Loss” setting.
Activate “Resume By RTC Alarm”.
We set the inclusion for every day or on a specific date of the month in the “Data” setting and hours / minutes / seconds in “HH:MM:SS”.
We save the settings and exit the BIOS using F10.
BIOS American Megatrends Inc. 0401, 05/05/2010. In the “Power” section, go to “ARM Configuration”.
Activate “Restore on AC Power Loss” to the “Power On” position.
Activate “Power On By RTC Alarm”.
The settings for daily switching on at certain hours / minutes / seconds become available.
Or a specific date, hours/minutes/seconds.
If you no longer need to use automatic scheduled computer power-on, simply disable (“Disabled”) the “Power On By RTC Alarm” setting.
Unfortunately, these are all variants of BIOS versions on which I was able to test the function - automatically turning on the computer. If you have a different basic input/output system (BIOS), then you will already know where to dig. And finally, I suggest watching a short video
For office workers whose activities are constantly connected with a computer, a useful feature may be the automatic inclusion of a PC on a schedule. Auto-on at a specified time is useful and home computer for more rational and comfortable use. Let's see how to organize turning on the computer at the appointed time.
Bootloader settings - BIOS allows you to set the desired startup time operating system. Let's go into the BIOS, find the enable function and set the required values. Login method basic system I/O and configuration BIOS settings determined by its manufacturer. You need to learn how to enter and change BIOS settings on your computer. Keys or their combinations for entering the BIOS can be found in the manual for motherboard. For example, the corresponding menu items are shown in several BIOS versions:
We see that on both screenshots it is activated (enabled) bios enable function by real time clock (RTC) and set the time to 7 hours 30 minutes.
Modern computers come with a new UEFI bootloader interface designed to replace the BIOS. In the UEFI BIOS utility, we also easily find the necessary options and set the turn-on time:
And do not forget that the power cable system block The PC must be connected to the mains. If the power is supplied by the UPS, the source uninterruptible power supply, must also be enabled.
When the login is password-protected, you need to pre-configure automatic user authorization without a visible password request. To do this, through the search bar in the Start menu, open the Netplwiz utility:
The Account Control Panel will open. Remove the checkbox in the checkbox: "Require username and password" and click the "Apply" button:
This will open the window " Automatic login to the system", where you will need to enter and confirm the user's password.
Now that all the settings have been completed, the computer will automatically turn on at the appointed time, the system will be logged in, and the programs prescribed in autorun will work. Torrent client, for example, or Skype. You can also set up an automatic connection to the Internet based on the connection method.
If necessary, you can schedule certain time play an audio file and use the computer additionally as an alarm clock. We will make the appropriate settings for this. Through the search bar in the "Start" menu, open the "Task Scheduler":
The Task Scheduler is a snap-in, a system administration tool for assigning automatically executed tasks. Let's create a task in the scheduler:
The Create Task window opens. On the "General" tab, write the name and description of the task. And select the installed OS in the "Configure for:" list:
Then go to the "Triggers" tab and click the "Create" button. The settings window for calling the "Create trigger" task will open. From the drop-down list to start the task, select "At login" and confirm with the "OK" button:
On the "Actions" tab, click the "Create" button to open the "Create an action" window. Using the "Browse" button, open the explorer and select the appropriate one for the alarm clock music file:
The selected audio file will be written in the action field.
On the next tab: "Conditions" the item should be checked:
We press the "OK" button. The task has been created and the "Create task" window will close.
So in this example, the task is scheduled to play an audio file at login at 7:30. That is, a few minutes after the automatic launch and configuration of the OS, the standard WMP player will turn on and the selected melody will sound. First, it is advisable to check the sound and adjust the volume in the player.
A logical continuation of the launch control topic is scheduled shutdown of the computer. A scheduled shutdown can be useful for shutting down a PC in the absence of a user after completing a specific task. For example, burning a disc, copying or downloading a large amount of data from the network. Read the lesson about the implementation of the scheduled PC shutdown task:
operating system developer Windows scheduling is available. As such, there is no shutdown button with parameters. To do this, you need to use the command line and other standard (built-in) tools Windows. This method is especially good because it works always and everywhere, since it was developed and provided directly by the developer of the operating system. Tested on Windows XP, Windows 7, Windows 8.1
Those who are not interested in theory can immediately go to the sections:
-
-
Scheduled shutdown or restart of the computer
(at a given time) by standard (built-in) Windows tools
Scheduled
(at a given time) from the command line (MS DOS)
Since time immemorial, all operating systems of the MS Windows family have been supplied with a disk operating system (abbreviated as MS DOS), which does not have the usual user interface for "batting" on it with the mouse. MS DOS is controlled by typing text commands in a special window, in the so-called command line . The command line works on any computer running any modification of the MS Windows operating system.
In operating system MS Windows, from the command line you can do absolutely everything that this system is capable of.
TO command line can be called in one of the following ways:
- press the key combination Win+R, enter cmd.exe, press OK
- "Start Menu > Run", type cmd.exe, press OK
- "Start Menu > All Programs > Accessories > Command Prompt"
Either way, a window will open. MS DOS
(command line to enter a text command)
It is in it (on the command line) that we will:
- enable and disable the countdown to
shutdown or restart your computer
(i.e. indicate how long to take action) - assign and cancel exact FOR
shutdown or restart your computer
(i.e. indicate exactly when to perform the action)
All manipulations come down to accessing the file shutdown.exe
and specifying the required parameters
Options and syntax for the shutdown command
(to refer to the shutdown.exe file)
File shutdown.exe responsible for shutting down the operating system Windows, its reboot, etc. To get a list of file launch options shutdown.exe from the command line - press the keyboard shortcut Win+R, in the window that opens, enter cmd.exe(go to MS DOS) and already in the DOS window (manually) enter " shutdown /?" (without quotes). Click "OK" ("Enter" key). In response, the system will issue a complete list of command parameters shutdown:
Regarding the parameter syntax for the command shutdown, That MS DOS understands both recording options - and through a hyphen (minus sign " - » on the numeric keypad) and through a slash (slash on the numeric keypad):
- shutdown /s /f /t 2000 is tantamount to shutdown -s -f -t 2000
- at 23:15 shutdown /r /f is tantamount to at 23:15 shutdown -r -f
In our case, there is no fundamental difference between a slash and a hyphen. It is much more important to remember about the arrangement of spaces (space). Because, in the understanding of the operating system, slash is equal to a hyphen with a space , then without a space - may not work.
For example, in the screenshot above, I took turns entering the commands " shutdown-?" And " shutdown-?", and " shutdown/?" And " shutdown /?". The answer of the system is obvious.
Simplified entry of the shutdown command
(Run window)
To enable or disable the countdown timer - open the "Run" window ( Win+R OK.
The time until the computer shuts down (reboots) must be entered in seconds.
The correct command input is confirmed by the corresponding pop-up windows in the tray. Pop-up windows should appear after each correct command input. They look something like this:
 |
System reaction to the command to turn off or restart the computer after 33 minutes = 2000 seconds |
 |
System response to a command to cancel the command to shut down or restart the computer |
 |
10 minutes before the task is completed, the system starts to remind you of the imminent end of the countdown. The reminder form can have several options. Probably depends on Windows versions and design style. |
 |
A few minutes before the task is completed, the system notifies you of the imminent end of the countdown |
Command line installation
the exact time of the current date
to shut down and restart your computer
Setting the exact time of the current date from allows you to assign exact time current date to shut down or restart the computer. Such a task will be executed only ONE time, after which the task assignment procedure will need to be repeated. If you need the computer to systematically turn off according to a schedule (at the same time), then you need to use or
To set the exact time of the current date to turn off or restart the computer - open the "Run" window ( Win+R), enter the desired command and click OK.
The time to turn off (restart) the computer must be entered in the specified format.
Values of time, naturally - at everyone the.
Unlike installation, the correct command entry when scheduling a shutdown or restart of the computer is not confirmed by the corresponding pop-up windows in the tray
From the command line it is convenient to create DISPOSABLE task to shut down or restart the computer. If you want to systematically turn off the computer on a schedule (for example, at a specified time, at the end of the working day), then you need to set the shutdown time after or after
Shutting down and restarting the computer
using an executable (batch) file
Executive (batch) files with the extension .bat() make it much easier to work with the command line. Once you have created such a bat-file with the text of the desired command, you can execute it by simply clicking on the batch file, without tediously calling the command line window and entering the command text into it.
Let's recall the list of our commands and create the corresponding batch files:
- shutdown /s /f /t 2000 or shutdown -s -f -t 2000
(turn off computer after 33min = 2000 seconds) - shutdown /r /f /t 2000 or shutdown -r -f -t 2000
(restart computer after 33min = 2000 seconds) - at 23:15 shutdown /s /f or at 23:15 shutdown -s -f
(turn off the computer today, at 23:15) - at 23:15 shutdown /r /f or at 23:15 shutdown -r -f
(restart computer today at 23:15) - shutdown /a or shutdown -a
(cancel the command to shutdown/restart the computer)
To create an executive (batch) batch file - open a notepad, copy (write) the desired command line into it and save the file with the .bat extension. For example, let's create two files - the Shutdown.bat file and the Cancel.bat file. In the first file, write the line " shutdown /s /f /t 2000" (without quotes), in the second - the string " shutdown /a" (without quotes). Clicking on the first file will give a command to turn off the computer after 33 minutes = 2000 seconds. Clicking on the second file will cancel the command to turn off the computer after 33min = 2000 seconds. Thus, we will get two files, clicking on which will have the same effect as in the case of a call with entering the desired command into it.
Everything is very simple, and - it's much more convenient than the command line. In addition, this method gives room for a flight of fancy and creative thought. For example, you can set the timeout to 28800 seconds. (28800 sec = 8 hours = the length of the working day), put the "Shutdown.bat" file in the computer's startup folder and no longer worry about turning it off at the end of the working day. Because, every time the system boots up, it will receive a command to turn itself off after 8 hours = 28800 seconds. The same effect will give the executive.bat file in autoload, with the content " at 17:00 shutdown /s /f" (without quotes). Moreover, this command is even preferable, since it sets the exact time to turn off the computer and does not depend on the number of reboots during the working day.
Funny. If you set a timeout of 180 seconds in the bat-file, in the startup folder, then the computer will turn off 3 minutes after it starts.
Shutting down and restarting the computer
at a given time through the task scheduler
Task Scheduler is a special feature Windows. Task Scheduler allows you to create and execute various scheduled tasks. In our case, this is to systematically turn off or restart the computer at a specified time. Unlike and , the task scheduler allows you to more flexibly set the exact time and frequency of turning off the computer.
To configure the computer to shut down or restart at a specified time through the task scheduler, open the task scheduler. It is located in "Start Menu > All Programs > Accessories > System Tools > Task Scheduler"
Then, in the window that opens, write the name of the task and its description. Here you can write whatever you want. The name of the task and its description will then be displayed in the middle column of the scheduler after the task has been created. I wrote the name - "Shutdown", the description - "Turn off the computer" and clicked the "Next" button ...
In the next window that opens, you need to select the frequency of the task. I chose - "Daily". "Further"...
In the next window that opens, you need to specify the date from which to start the task and the time of its execution. By default, the current date and time values are highlighted. You can leave the date unchanged (start today), but you need to set your own time. This will be the required time to turn off the computer. I set 17:00:00, which corresponds to the end of my working day. The line "Repeat every 1 day." - left unchanged. "Further"...
In the next window that opens, you need to set the switch (checkbox) against the words "Run the program". "Further"...
In the next window that opens, in the line "program or script" enter the command " shutdown" (without quotes), and in the "add arguments" field " -s -f» (without quotes) - to turn off. If you need to restart the computer, then in the "add arguments" field, enter " -r -f" (without quotes). "Further"...
We press the "Finish" button. Task on daily computer shutdown at 17:00- created and launched. You can check the job or delete the job as follows. We launch the scheduler, click on the “Task Scheduler Library” and in the middle column we find the desired task (by name). Right-click on it and select the one you want from the drop-down menu.
To test, I clicked on Run. The computer reacted instantly. It works, cheers!
Turning off the computer
Shutting down the computer from the command line
