How to change login on Wi-Fi Beeline. How to find out your Wi-Fi password? Features of individual routers

During operation Smart router-Box users need to reconfigure equipment, which requires entering an individual login and password. But what to do if the router password is irretrievably forgotten or lost and cannot be recovered?

In this case, you can unlock the Beeline Smart-Box router by resetting the settings and then entering your credentials and password, among other things.

What to do if you forgot the password for the Smart-Box router?

To unlock the Smart Box router if the password is lost or forgotten, you need to change it. With the current settings, it is no longer possible to change the password. You need to perform a factory reset and then enter the required data following the recommendations below.

1. Check that network cable the computer was connected to one of the LAN ports located on the device.
2. The cable that is routed into the apartment must be connected to the “WAN” port.
3. Press the “Reset” button located on the router body.
4. On your computer, open your existing Internet browser and enter the following combination in the address bar - 192.168.1.1. The welcome page will open wi-fi control router. Click on the “Continue” button on the screen.
5. On the “Start over” page that opens, you must enter the standard login and password. Enter the word admin in both lines and click Continue.
6. In the menu that appears, select the section – “ Quick setup».
7. Here you need to fill out several subsections described below.

In the “Home Internet” field, enter your new username and password. Other Beeline home Internet settings are already embedded in the device’s memory and do not require adjustment.

In the subsection “Wi-Fi network of the router” you need to come up with the name of your home wireless network and a password to access it (at least 8 characters).

"Guest Wi-Fi network" has similar characteristics home network, here you also need to enter a name and create a password.

In the “Beeline TV” field you need to select a port to connect the set-top box. This option is relevant if, in addition to home Internet, you also use Beeline television. You only need to fill out this subsection when connecting a TV cable to Smart-Box router. Select the number of the port to which the cable going to the set-top box is connected.

After completing all the necessary settings, click “Save”.

Saving the settings will take certain time, usually about 1 minute.

Having made an Internet connection, the router will start working, and the message “Internet connected” will appear on the screen.

Reset Beeline Smart Box router

In order to reset the router, you need to find the “Reset” button on the side where the cable connection ports are located. It must be pressed using a match or a toothpick (do not use sharp objects such as a needle, you may damage the button). The button must be pressed for 10-15 seconds until the indicators on the front side of the device blink. After this, the router will boot from standard settings and will be completely ready to configure according to the instructions above.

Don’t forget to write down your new login and password so that in the future you can quickly make the necessary changes to the settings without resetting the router!

Video: Instructions for setting up a Smart Box router

BeeLine company offers its customers completely ready-made solutions for providing Internet access. In any of their communication stores, Wi-Fi routers that meet all modern standards are available for purchase and quick commissioning.

By default, a WiFi security code has already been entered for each device provided to the subscriber. Below we describe all the necessary steps on how to independently change the current password on WiFi routers of various brands provided by Beeline.

The main reasons for the need to change the network access code

The main purpose of the secret combination is to protect the wireless network and prevent third parties and intruders from accessing it.

The main arguments in favor of changing the password on the router are the following:

1. Connecting “uninvited guests” to a wireless point causes a general drop in data transfer speed;
2. An insufficiently complex secret sequence of access code symbols significantly increases the likelihood of copying by attackers confidential information, stored in devices and PCs on the user’s home network;
3. Often, criminal elements operating in cyberspace use stolen access codes for their own selfish purposes. e-mail owner of a poorly protected wireless point;
4. It is especially unpleasant for the user of a router with an easy-to-remember password when the details of his bank accounts fall into the wrong hands;
5. The simplicity of the access code or its persistence over a long period of time makes it possible to hack into a home network and introduce malicious applications into it. It should be noted that some modern viruses can quickly spread throughout all gadgets connected to local network, and output from working condition not only the software of devices and computers, but also can lead to failure of the equipment itself. For example, there are malicious utilities that can write to RAM, but removing the virus from there is not possible.

If this small list of prerequisites for the advisability of changing the WiFi password was sufficient, then below are step by step instructions, how to change it on routers that BeeLine currently uses, taking into account all the features software each brand of device.

Preparatory activities

Before you begin the procedure, you should know exactly the current safety parameters. Usually security code and name, set by default, are indicated directly on the sticker glued to the body of the device.

The IP address of the device is often written here, which is used to log into the equipment’s web interface. This information can also be extracted from the accompanying documentation and the agreement with the provider.

By providing personal brand devices for the convenience of customers, Beeline argues that the routers are already configured with the necessary parameters and are ready to work, you just need to connect them. At the same time, despite such theses, we advise you to immediately change the password on your Beeline Wi-Fi router. Unfortunately, there is no need to talk about individual router protection - they come with pre-installed template protection, unless the setting is changed by the technician installing the equipment.

How to find out the password on a Beeline router

Usually, the case already has several stickers that contain the most necessary information: the router address, preset login and password, characteristics and model of the router.

If your equipment was installed by a specialist, then the password and login must be indicated in the contract or in the documents for the provision of services for connecting, installing and commissioning the equipment. You can immediately ask the employees to change the keygen to the one you choose.

If you have forgotten your password or cannot find your copy of the agreement, you can restore it by contacting the Beeline operator at “ hotline” – 8 800 700 8378. You will have to answer several questions about who and when the document was signed, contact number and others.

If Internet access is maintained, then there is an option to contact technical support with a request from your personal account. This will make it possible to view the contract data – number, date of signing and much more.

Let us note the methods by which you can easily find out how to change the password for WiFi Beeline on a laptop or computer. The first thing is to look at the password on the router case.

When entering the network settings through the standard Windows operating system, activate the function of showing hidden characters, and then the keygen will be displayed not as dots, but as text. This is another option.

On a Mac, this is solved using a similar principle, through “Keychain Access,” which can be accessed through “programs,” or, if you know how to work in Spotlight, through it.

And finally, a way problem solver by the method of a total hardware reboot. Reverting the router settings to standard using the “Reset” button on the router is the only possible option. After that, use the data from the information sticker of the router. Do not forget that this button requires a long press, and in order to prevent spontaneous reset of settings, it is structurally protected from this. You will have to hold down the button for ten to twelve seconds so that all the indicators go out, and then all the indicators light up at once. If this does not help (on some models), then while holding “reset” you need to turn off and turn on the router.

Changing the password on Beeline router models

The first thing you need to do is look at the password on the router case. The stickers contain the necessary information: login, password, hardware version of the device. Next we will tell you about the Beeline router.

Beeline provides a line of its own routers, differing in additional functionality, but at the same time similar in configuration and management interface and modifications. Therefore, the algorithm for changing the wi-fi password will be the same for each of the presented models. Equipment setup can be done without technical support, using the tips offered in the article. Let's look at changing the password on three different models.

We'll tell you how to change the password on a Beeline WiFi router:

1. Launch a web browser and go to the address indicated on the box or on the case.
2. Enter login and password.
3. In the control panel, find the “Wi-Fi” section, select “Security”.
4. Enter the new information in the fields indicated and save the changes.
5. Reboot your router.

Changing the key on the “Smart Box” model:

1. Repeat the first and second steps from the previous paragraph.
2. On home page select the “Quick setup” section.
3. On the menu " Home Internet”Write down new information in the “Login” and “Password” fields.
4. Click “Save”.

Wi-Fi compares favorably with traditional methods of connecting to the Internet in the absence of endless wires and connection to a single place of work and visiting sites. But a wireless connection has several weaknesses, and the main one should be called vulnerability to attackers. The simplest way Protecting your own computer and personal data from scammers is to install the most complex network access code. But not every user knows how to change the password on a Beeline wifi router. Moreover, some subscribers do not know how to restore the correct combination if it is forgotten. But in reality, the mentioned procedures do not contain anything complicated, and any person can successfully complete them. The main thing is not to rush into decisions and approach the task as seriously and thoroughly as possible.

We have already mentioned above the main reasons that prompt router owners to change the secret combination for connecting. They are driven to make such a decision by the desire to protect themselves from attacks by intruders. If we focus on all the existing reasons to make changes to the device access settings, it turns out that the most relevant ones are:

1. the desire to limit access to the traffic of strangers, neighbors, children who spend too much time on the Internet;
2. protection of personal data from fraudsters;
3. reducing the likelihood of the device being hacked and unauthorized people gaining control of the equipment;
4. increasing financial security (when using Internet banking, virtual wallets and payment systems).

There are other reasons that make Beeline subscribers think about changing their network access key.

How to find out the password for Wi-Fi Beeline?

There are 3 main situations in which they are used different ways clarify password:

• when the user has available sources of information;
• when such sources are not available;
• When secret code changed.

In the first case you need:

1. look at the body of the device and find a sticker indicating information for authorization and IP;
2. find similar information in the subscription agreement;
3. Study the documentation supplied with the equipment and find the combinations you are interested in there.

The second situation (if documentation is lost or inscriptions on a sticker are erased) will require a call to ask for help from consultants. If the call does not help, all you have to do is visit the office where the subscription agreement was concluded and ask for a copy of the documents. Both methods will require the use of a passport to verify the client's identity.

In the last situation described, when it is not possible to remember the previously changed combination, resetting the settings will help. To reset, just hold down the corresponding button (Reset) of the equipment for 10 seconds. After which the basic parameters and settings will be restored, and users will be left with any of the methods described above for obtaining information.

How to change the password on a Beeline Wi-Fi router?

Those wishing to find out how to change the password on a Beeline Wi-Fi router should keep in mind that the method of changing will be extremely similar, regardless of the equipment model. Therefore, if the subscriber does not have detailed instructions, it is enough for the mind to follow the instructions given below, not forgetting to take into account the individual characteristics of the equipment installed on it. To make changes you will need:

• open any available browser;
• enter the IP address indicated on the device into the address bar (usually 192.168.1.1);
• pass authorization using standard login combinations;
• go to security settings;
• specify WPA2 as the optimal network encryption type;
• enter characters to designate the network in the SSID field;
• choose a strong password;
• save the changes made;
• reboot the device.

After which the changes will take effect, and you will have to connect to the Internet taking into account the changes made.

Changing the password for Smart box

Given the similarity of the change procedure, there is no point in re-describing the process. It is much wiser to take a closer look at the distinctive features characteristic of each individual model. Yes, owners Smart box It's worth remembering that:

1. the section dedicated to security is located in the wifi tab;
2. the updated code will have to be entered into the PSK box.

Otherwise, the process is completely the same as described above, so no surprises await users.

Changing the password on Zyxel Keenetic Ultra

This manufacturer offers owners of their own equipment:

• enter network interface, using the address 192.168.0.1;
• print for authorization in each admin column;
• The updated secret code must be entered in the line labeled “network key”.

The manufacturer does not provide any other features, so anyone can cope with the task. Beeline subscriber. The main thing is to think in advance about choosing a reliable inscription or character set.

Changing the password on ZTE MF90

Those wishing to change the password on a wifi router of the brand mentioned above should go back a little higher and re-read detailed instructions. It completely coincides with the appropriate process, so it is impossible to describe anything additional.

It is important to add that the name and access code chosen by the user will be used not only for connection, but also for authorization, so it is worth writing them down in a timely manner or saving them in a safe place.

If the necessary information has been forgotten, you should use the above recommendations and reset the settings to the basic, factory level.

Changing Huawei E55 (3G Wi-Fi) password

The main feature of Huawei is the English-language version of the personal account. Therefore, to those unfamiliar with English language users have not encountered huge difficulties and problems with access, it is worth using the following path after logging into your account:

1. Settings;
2. WLAN;
3. WLAN Basic Setting;
4. the name is entered in the SSID column;
5. to enter a new code you will have to click the window next to WPA Pre-shared key;
6. saving is done by clicking the Apply button.