Tricolor TV - receiver software update. How to update the Tricolor software on your own? What for? Setting the frequency on the receiver gs 8306

class="eliadunit">

Refresh software you can on your own. This is done quite simply if you follow the instructions offered by the Tricolor provider.

Instructions for updating software Tricolor GS 8305 and GS 8306

To update the receiver software, you must perform the following steps:

1. Remove the receiver's power cord from the outlet, then plug the receiver back into the network. This is necessary for a complete reboot.
2. Switch the receiver to the channel "Info channel "Tricolor TV". After a couple of seconds, a message will appear on the TV screen about the need to update the receiver software, the body of the message will read: update software? And answer options: yes and no, you should click on "Yes".

If this message about the need to update the software does not appear on the TV screen after 5 minutes, subscribers need to reset the receiver to factory settings:

• you need to go to the "Menu" of the receiver;
• go to the option "Settings";
• select from the list "Factory settings";
• press "OK" on the remote control.

After receiving consent to update, service messages about the process of updating the receiver software will begin to appear on the screen.

The software update takes an average of five minutes.

When the update is completed, the receiver will reboot and turn on in "Setup Wizard".

At the initial stage "Setup wizards" subscribers will be asked to select the menu language and provider. Must be selected from the list "Tricolor TV Center", then you can proceed to the next step. When the search for TV and radio channels "Tricolor TV" ends, you will need to make sure that the receiver software version has changed to 1.1.001. To do this, you need to go through several steps:

class="eliadunit">

• go to "Menu";
• go to "DREInfo";
• hereinafter - "Status";
• after the transition, you can check the software value in the third line.

If the software version of the receiver has not changed (you need to check with the old one, which was obviously written on a piece of paper), subscribers need to turn off and turn on the receiver on the Tricolor TV Info Channel and repeat the update procedure from the beginning.

Description of the new software

The new software is designed to increase the level of security of the receiver and ensure the stability of its operation. Also, the new software is able to make the operation of the receiver when watching TV channels and using additional services"Tricolor TV" more convenient. New functions have been added to the new software in the interface of the "Tricolor TV Cinema Halls" package. Individual buttons also received additional new features, for example:

• by pressing the Red button, you can call up the description of the selected movie on the screen;
• pressing green - options for sorting the list of films (by genre, alphabetically, next screenings, novelty in the schedule);
• pressing yellow - a list of films for which the subscriber has set a timer will appear;
• pressing blue - a list of films will be displayed that will be available for viewing the next time the repertoire is updated.

The Status menu has also been redesigned for better user experience. After the update, the subscriber will have access to two options for displaying information: the short option contains the most frequently used data, including information about the receiver ID number. It is displayed immediately when you go through the option in the "Status" menu;

advanced contains all information about the receiver - opens after pressing the Red button ("F1" or "i") on the remote control remote control when you are in the "Status" menu.

Why update the receiver software?

Tricolor TV constantly releases software updates. To keep abreast of all the new products, more convenient and of high quality, you need to track them on the official website of the company so that the CI module does not fail. This procedure will not take much time and is completely free for registered users.

CI is a built-in module, the software is necessary for safe and high-quality broadcasting of channels.

Another reason to keep track of new software is that the user will not be able to customize the module software if necessary if he missed one or more previous versions.

GS 8306 upgrade from USB to new version 1.9.160, start

GS 8306 waited its turn and we update it via USB. For this we have a new software version 1.9.160. Let's see what difficulties can be during pouring. Because, unfortunately, updates on the operator's receivers have not been going very smoothly lately.

GS 8306 v.o. 1.9.160

GS 8306 update progress

2. The receiver starts the update process. The whole button is lit, there is no image on the screen! It is impossible to check the update process on the screen, both receiver outputs do not work!

GS 8306 v.o. 1.9.160, top diode.

3. At the receiver, one diode glows constantly, the second blinks occasionally. This is all normal, the main thing is not to turn off the receiver from the network! If you turn off the power now, the receiver will fly away for a long time!

GS 8306 v.o. 1.9.160, the update process is complete.

4. After the receiver has loaded everything, both diodes will turn off! We wait at least 10 seconds. If you turn it off earlier, the receiver will be damaged! Sure, it's scary, but that's how it's done...

GS8306 p.o. 1.9.160 inclusion.

5. After everything has been updated, turn off the receiver from the network. We take out the flash drive from USB. Turn on the receiver and set up all programs.

GS8306 software version 1.9.160 check in status.

That's all, we have updated our receiver, now we can watch TV programs. The main thing to remember is that during the update, our receiver may break down and this is not a joke. The majority of users will not be able to repair the receiver on their own.

If you still have doubts about how to upgrade, watch the video. In this video, all the updates take place in real time.

We will add another video about this firmware.

GS 8306 appeared in the summer of 2012, becoming one of the most compact devices Tricolor TV. The model allows you to view a package of high-definition TV channels "Maximum HD".

Appearance

There is no digital display, which reduced the power consumption of the receiver. The power supply removed from the case lowered the heating temperature of the device, which, according to user reviews, increased its service life. Power supply failure is the main cause of breakdowns satellite tuners, and now, if necessary, it can be easily replaced by another.

Tuner "Tricolor" GS 8306 is produced in silver metal case small size. Side parts top cover rounded, which visually reduces the height of the receiver and gives it a modern look. Top, chassis and back panel are made of metal, and the front panel is made of plastic. There are ventilation holes at the top and bottom. The front panel is minimal. It has a button for switching the operating mode, channels and volume control.

The operating mode indicator is combined with the illumination of the Standby button. Its white-blue color, according to user reviews, is poorly distinguishable against the background of the front panel. On the side of the case there is a slot for a conditional access card.

The back panel contains:

• input and output LNB IN and LNB OUT;
• RCA connector for composite video signal output;
• RCA connectors for outputs of the right and left sound channels;
• USB port;
• HDMI connector;
• connector for 12 V power supply.

Filling

The Neotion NP6+ CPU is designed for budget MPEG 4 standard definition (SD) and high definition (HD) devices and supports the use of secure data exchange technology. The microcircuit does not require an additional heatsink, since its heating does not exceed 45 °C. Receiver system board accommodates two brackets random access memory DDR2 512 MB. ROM - based on flash memory with a capacity of 16 MB. Data transfer rates up to 35 Mb/s are supported. There is an 8Kb EEprom memory chip 24C08RP used to store important system parameters. In the receiving path of the presented receiver, the DVB-S / S2 block of the Serit SP2230 MVb tuner is used. The input part of the unit uses a Montage Technology M88TS2022 tuner chip. The demodulator is based on the Montage Technology M88DS3103 chip.

Distinctive features of the tuner unit:

• loop RF output;
• mode automatic detection broadcasting parameters;
• blind search functions and

The HDMI interface controller is based on the Analog Device ADV7520 chip supporting the HDTV video format with a built-in HDCP encryption module. The card capture reader is located on a separate board and has additional plastic guides.

The LNB power supply is controlled by the Allegro A8293 regulator, which generates up to 8 voltage levels with a tonality of 22 kHz and controls the load consumption.

The controller is controlled via the I2C bus. There is a slot on the board for connecting the SD card slot and the front panel display, which is reserved for the following receiver models. The receiver is powered by an adapter direct current voltage 12 V and current 2 A. There is also a 2 A fuse on the board.

Contents of delivery

The GS 8306 has the same remote control as other Tricolor TV satellite tuners. According to users, it is light and convenient, because the control buttons are concentrated in the center. There are buttons for calling information and other functions of the provider: “TV Mail”, “TV Chat”, “Order a movie”. "Sign In" is used to switch the signal between HDMI and CVBS interfaces. Feed remote control 2

The kit also includes a brochure "Tricolor TV" and an instruction manual.

Connection

To indicate the operating mode of the GS 8306, a backlight is used, which is created by 2 LEDs. The indicator mode is determined by the sequence of their activation. These modes are:

• There is no glow - the tuner is off. However, the receiver has a standby sleep mode in which there is no indication. Entrance and exit to it is made by the Standby button.
• Solid light — the receiver is booting up after turning on or exiting standby mode. If the GS 8306 tuner does not turn on, the indicator is on, then most likely it is in download mode.
• Blinking indicator - standby mode. The transition to the viewing state occurs by pressing the channel switch button on the front panel.
• The lower part of the indicator is lit - the operating mode, a signal is being supplied to the HDMI interface.
• Glows top part indicator - operating mode, the signal goes to the CVBS connector.
• Simultaneous signaling to HDMI interface and CVBS connector is not possible. When the receiver is first turned on, the video signal is fed to the RCA/CVBS connector according to the 576i standard.

The audio signal is fed to the RCA outputs regardless of the interface.

Resetting the GS 8306 receiver will not affect the video output mode. There is no resolution control on the HDMI output - only 1080i is fed. This can make it difficult to use the tuner with 720p TVs.

If the connected device sets the resolution automatically, there may be a situation where setting the picture resolution external device is not perceived. The Tricolor TV receivers are rebooted, and the HDMI interface is turned off.

Power consumption

Current consumption at a voltage of 12 volts:

• sleep mode - 100 mA;
• Standby mode - 450 mA;
• viewing at standard resolution - 650 mA;
• high definition viewing - 750 mA.

In sleep mode, the loop output is disabled. The GS 8306 is updated via the tuner's USB interface.

First steps

When you turn on the receiver for the first time, or when you reset it, the "First Time Setup Wizard" is launched. The setup is simple and consists of the following steps:

1. Setting the menu language from three possible ones (English, Ukrainian, Russian).

2. Setting the region from the list downloaded from the satellite. If you select "Main", then channels will be found that are broadcast throughout the "Tricolor TV" zone. Selecting another region leads to the addition of channels.

3. Search for TV and radio channels "Tricolor TV". This mode starts after selecting a region. During tuning, the tuning indicators (level and quality) and a search progress indicator are displayed on the screen. The last one lasts less than a minute, then the receiver goes into viewing mode.

4. Repeat quick setup is possible using the "Search for Tricolor TV channels" function from the main setup menu. There are no other search modes. There is no need to adjust the antenna parameters. The GS 8306 receiver is intended for use in the standard Tricolor TV subscription kit, and there is no corresponding menu.

Settings menu

Allows you to install:

• Primary and secondary audio and subtitle languages.
• Clock synchronization mode - automatic by satellite and manual.
• Display Format (Unchanged, Letter Box, PanScan, Combined).
• Analog video settings (PAL is the default). The quality of the image, judging by the reviews, is decent. Switching to SECAM mode increases brightness and leads to loss of contrast.
• 4-digit access PIN. As users have noticed, the lack of protection of the setup menu makes setting the code meaningless, as it is possible to reset the settings and the PIN code to the factory settings.

View

The maximum number of television and radio channels that can be stored in the device's memory does not exceed 1000. Their location differs from the usual scanning of the Tricolor TV package. The numbering starts from zero. You can choose how the list is displayed (in 1 or 3 columns), sorting alphabetically and in reverse order. There is no list editing function. There are no age restrictions. The channel cannot be moved, deleted, renamed, blocked with a PIN code, assigned to one of 5 lists, which can include both television and radio channels. Favorite channels can be selected using filters. They can already be edited and repositioned in the list.

When the tuner goes to sleep, the information about the last viewing is lost. When turned on again, the Tricolor TV receivers switch to the viewing mode of the “zero” number of the last selected list.

Tricolor TV broadcasts are encoded by the DRE Crypt conditional access system. The subscriber, buying a GS 8306 receiver, receives a smart card with a 14-digit DRE ID. Subscription status can be viewed in the "Subscriptions" menu. Switching takes 3 days for SD mode and 4 days for HD mode. It is performed via a list called on the screen or one by one. It is possible to quickly switch pages of the list.

Utility functions

The firmware of the GS 8306 receiver supports the following service functions.

• Program guide for the week, including data on the genre of programs and their description. The EPG loads quickly. The TV guide window displays program data for 8 favorite channels. There is a timer for watching programs.
• Teletext.
• Subtitles.
• Alternative audio tracks.
• Cinema hall. The window displays a list of available films, time before the start of viewing, genre, description of announcements and films. The My Sessions service allows you to create your own broadcast schedule. TV mail. The service displays on the screen messages and images attached to them sent from the site "TV Mail Tricolor".
• TV chat. The service allows you to show text messages With cell phone. Messages are displayed in a window in view mode.
• Banners displayed when switching between channels. Advertise goods and services of the provider or other companies.

Firmware change

To update the tuner software using the USB connector, do the following:

• the downloaded file must be written to the root folder of the USB drive;
• insert the drive into the slot;
• turn off and turn on the power;
• after some time (about 30 s), a message should appear on the screen about the start of the program download;
• when the download is completed, a corresponding message will appear;
• remove the drive;
• turn the power off and on.

Please note that after the update, the receiver settings are reset to the factory settings.

According to users, the GS 8306 receiver is not without flaws, but it is suitable for watching Tricolor TV channels in standard definition and HD mode. The receiver allows you to receive all packages provided by the Tricolor TV operator: Cinema, Night, Maximum HD, Superoptimum, Optimum. The tuner supports HDTV image format, MPEG2, MPEG4 encoding. Despite the fact that the operator's software does not allow viewing the channels of other satellites and operators, the number and variety of frequencies provided by Tricolor TV, according to subscribers, eliminates such a need.

In their work, Tricolor-TV systems use receivers that decode the signal coming from satellites. For their proper operation, operational firmware is used, which must be updated from time to time. GS 8306 is one of the most common receivers among Tricolor-TV subscribers, so if you use it, like many other users, you need to be able to install outgoing updates to its system.

Update receivers, as well as other equipment designed for decoding digital signal, need to:

1. All systems for connecting to the satellite and to the TV worked as efficiently as possible - the best picture was shown, the list of channels was available, etc.
2. Possible problems with the previous software have been eliminated and no longer annoy users.
3. Introduce new functions, codes and features into the system.
4. Simplify the interaction between the user and the interface - make the program interface more convenient and understandable.
5. Check the performance of the old system and clean out the accumulated "garbage".

If you do not update the software, there may be interruptions with the broadcast of TV channels over time. Errors on the screen will appear more and more often, blocking access to viewing. If the software of the smart card and the receiver do not match, “Error No. 5” will occur, viewing will be impossible. And even the well-coordinated work of the receiver and TV can be in jeopardy.

Action algorithm

There are two ways to update the receiver software:

1. Using the distribution kit downloaded to a USB flash drive.
2. Using a satellite connection.

With a flash drive

To update the receiver of this model in this way, you must:

1. Check if you need an update - to do this, in the "Information" menu section, view latest version firmware and run a check for the availability of updates.
2. If updates are available, turn on your computer and go to: http://www.gs.ru/support/manuals-and-software/GS-8306/ . Here is the official software for digital receiver- and only from this site it is recommended to download licensed software for GS models (GeneralSatellite).
3. Download the downloaded to a flash drive - the files must be in the root directory, and the flash drive itself is formatted in FAT32.

Important! Do not change the name of the update files under any circumstances.

1. Connect the USB flash drive to the turned off receiver, and turn on the receiver.
2. Take a close look at the LEDs around the power button. After turning on the receiver in this way, both LEDs will flash, after which one will go out, and only the top one will remain lit. The lower one will flash periodically. This is the sign that this moment system is being updated.

Important! Information about the progress of the update will not be displayed on the screen, so watch the diodes!

1. The software update takes approximately 5 minutes - both LEDs will turn off when finished.
2. Wait 10 seconds or more before removing the USB flash drive.
3. Take out the flash drive. She is no longer needed.
4. Unplug the receiver from the outlet, and after 10-15 seconds, turn the power back on.

The update is completed, you can see the new version of the software in the menu.

Attention! The features of the receiver model GS 8306 will not allow you to "roll back" to previous version software, if you encounter difficulties with this during installation.

By satellite

Update via standard connection satellite is much easier and more user-friendly, but there are more problems during installation than when updating from USB.

To avoid violations during the update, follow the instructions strictly:

1. Start with a new channel search, and save them when finished.
2. Turn the receiver off and on by unplugging and plugging it back in.
3. Turn on channel 333 - it will be informational.
4. Wait a couple of seconds - the system will check for updates and notify you of its availability. The message will also indicate the new version of the software.
5. Select Yes.
6. Wait for the second stage of the update to finish.
7. Wait for the receiver to reboot.
8. After the last reboot, the Setup Wizard will appear on the screen - select the language, time, operator, region.
9. Search for channels.
10. Ready! After the installer completes its work, the new software version will be displayed in the Status menu item.

Important! Never reboot the receiver or turn it off during the installation process. This may lead to the fact that the system is not completely updated, and you will not have access to view.

Broadcasting the signal of the Tricolor TV operator on the TV screen is carried out through receivers. These receivers are designed to decode satellite signals. Their correct operation depends not only on the serviceability of the equipment, but also on the software, which needs to be updated periodically.

And since Tricolor TV's GS 8306 receiver is the most popular, it is worth considering in more detail, as well as the software update process on it.

Receiver

The Tricolor GS 8306 receiver began to be sold back in 2012, but even after years it remains one of the most frequently purchased devices. It provides high quality broadcasts, allows you to connect different models TVs, and also supports all options and packages of the operator, including packages, and others.

Regarding the advantages, users distinguish the following:

1. Ease of repair;
2. Small power consumption.

There were also some drawbacks:

1. It may be difficult to determine the TVs connected to the receiver, as a result of which you have to manually configure;
2. No digital screen;
3. You can't connect to other carriers.

Software Update

As with other gadgets, the GS 8306 firmware needs to be updated periodically. This is required to achieve the following goals:

1. Elimination of probable problems with past software.
2. Achieving maximum efficiency of equipment operation.
3. Adding new codes and functions to the system.
4. Inspection of old software for errors, etc.
5. Improved user experience.

If you do not update the GS 8306 Tricolor TV receiver, this may lead to interference in the broadcast, and they will occur more often. Therefore, updating the GS 8306 firmware is mandatory if the system indicates that new receiver software is available.

Execution of work

You can install new software in one of 2 ways.

1. By connecting to a satellite;
2. Using a distribution kit previously downloaded to a flash card.

Satellite

On the one hand, this option is easier for an ordinary Tricolor TV client. On the other hand, in the process of updating, difficulties arise much more often.

In this case, the firmware update of the GS 8306 Tricolor TV should be done according to the instructions.

1. Implement new search channels and save them;
2. Remove the plug from the socket and plug it in again, thus turning off the receiver, and then turning it on again.
3. Turn on channel 333;
4. Wait a little while the receiver checks for a software update - the pop-up message will also indicate the software version;
5. Click on the "Yes" icon;
6. Wait for the download to complete;
7. Wait for the completion of the II stage of the update;
8. Wait for the receiver to reboot;
9. When the receiver reboots, the Setup Wizard will appear on the TV screen - you need to select the region, language, operator and set the time;
10. Find channels again.

On this self update firmware GS 8306 Tricolor TV from satellite is completed and the new software will be reflected in the "Status" tab.

Note! During the software update process, it is forbidden to turn off or restart the receiver. AT otherwise probably incomplete update and lack of access to view channels.

Distribution kit from a flash card

To update the receiver, you will first need to find out the latest software version, and then activate the search for the availability of updates.

It is on it that there is official software for the receiver, and therefore it is necessary to download it from here.

The software needs to be downloaded to a flash card in the root directory. The flash drive must be formatted in FAT32.

Note! It is not allowed to change the names of files.

After turning on the receiver, you need to look at the lit LEDs around the power button. Both LEDs should start flashing, after which one of them will go out, and the top one will continue to light. In the future, the top one will light up, while the bottom one will blink. This means that the update process is currently taking place.

Note! It is necessary to follow the indicators, since nothing will be displayed on the TV screen.

The duration of the GS 8306 Tricolor TV software update is about 5 minutes. You need to wait until both LEDs go out. When this happens, it is recommended to wait 10-20 seconds. and only then remove the flash card.

It remains only to unplug the receiver from the socket, and then, after 15 seconds, plug it back in.

After that, the installed software will be displayed in the menu.

IMPORTANT! The GS 8306 Tricolor TV receiver will not be able to return the previous software if a new one is installed.

As you can see, updating the firmware of the GS 8306 Tricolor TV receiver is not difficult. You just need to follow the instructions.