Satellite TV without receiver. Equipment for digital television - this is what you can buy in our store

Satellite TV has a number of advantages in relation to conventional terrestrial or cable television. First, it is much large quantity channels - entertaining and educational, for adults and children, where everyone can find something interesting for themselves. Secondly, it is high quality of the image and a sound. Installation of equipment for displaying satellite television is usually carried out for a fee by the service provider, but knowing the correct sequence of actions, you can connect a satellite dish to the TV yourself.

Satellite equipment - functionality and installation

As you know, the satellite chosen by the user at his discretion (usually Sirius 5.0E, Amos 4.0W, Hotbird 13.0E or others) transmits a signal. The task of the satellite dish is to reflect it to the converter, which converts the received data and, in turn, sends it to the set-top box. But only the receiver sends the signal to the TV receiver via cable.

What you need to mount the plate

A typical satellite dish mounting kit includes the following items.

1. Plate to transfer the signal from the satellite to the converter. The minimum diagonal is 60 cm, the maximum diagonal is 120 cm. The required size depends on the area where the installation is carried out, as well as on the obstacles located in front of the plate.
2. bracket(selected in accordance with the diagonal of the plate), anchors for fastening.
3. Converter or head. The device is designed to convert the signal reflected from the dish and further transfer it to the set-top box.
4. Disek, which serves to combine two or more converters.
5. Television cable.
6. Receiver. To watch free channels, you can purchase the simplest set-top box. If you plan to view paid content, you will need a receiver with a card reader.
7. F-connectors needed to connect the cable.

Setting the plate

satellite dishes should be installed in an easily accessible place. This is necessary to always be able to repair or adjust equipment.

Important! The antenna must initially be directed to the south. All sorts of obstacles should be absent on its path: buildings, branches, trees, and the like, since such obstacles significantly degrade the quality of the received signal.

Instructions are always included with the equipment, and assemble the plate in accordance with the recommendations set out in this document. In this case, during the installation process, the following important points should be considered:

• the bracket with the antenna must be very firmly fixed to the wall so that a strong gust of wind does not rip off and damage the equipment;
• correct mounting of the bracket requires the direction of the converter down;
• the cable must be sealed and securely fastened with ties and electrical tape;
• you need to mount it so that the satellite dish rotates freely in all planes, which is required for ease of setup.

Connecting to a TV Directly

Modern television panels equipped with a DVB-S2 tuner, allowing you to do without a receiver to receive satellite broadcasting. It is worth knowing that a TV connected in this way will catch free TV channels, but only in a foreign language.

To watch domestic channels CAM module required, which connects to the TV via the PCMCIA connector. It can be bought separately or together with a satellite TV package from any of the many operators, be it Tricolor TV, MTS or NTV PLUS.

To connect this antenna to a TV receiver directly, you must tv cable, equipped with an F-connector, plug into the "LNB Satellite In" input. The next step is to configure the channels. On TV panels LG, Samsung, Philips, Sony Bravia, Toshiba, Panasonic and other manufacturers, this process is very similar, the differences will be only in the menu interface and in the names.

So, after connecting the antenna, you need to turn on the TV, open the settings and run automatic search channels. Definitely needed mark satellite as signal source, after which you will be able to select the required satellite. Further, if you plan to view only free content, you need to specify that encrypted channels must be skipped. After the search is completed, you can start watching satellite TV.

TVs with a built-in receiver have a number of advantages. First, this no wires connecting the TV panel and the set-top box, and secondly, this is the convenience of control, because in this case one remote control is used instead of two, which are usually required when connecting the antenna through a separate set-top box.

Connecting to a TV via a receiver

The easiest and most common way to connect satellite equipment to a TV is through a receiver. To connect the set-top box to the TV panel, you can use the following connectors:

• antenna input;
• RCA, aka "tulip" - for transmitting an analog signal;
• component connector;
• SCARD;
• HDMI.

Important! Connecting the set-top box to a TV receiver via a tulip or a TV cable with a standard antenna plug or F-connector provides an image Low quality. The best picture can be obtained when connected via HDMI. And from the converter to the receiver, the signal is transmitted through a television cable with a connection via an F-connector.

In addition to the main purpose external receiver performs a number of additional functions such as playing back photos, videos or audio from a flash drive or hard drive, connecting the TV to the Internet, etc.

Satellite search and channel tuning

After all the cables are connected, the TV and receiver are turned on, and the satellite dish is installed and pointed to the south, you can start tuning the antenna.

With multiple converters

If several converters are connected, you need to start working with the middle one, setting it to the Sirius satellite. The sequence of actions will look like this.

Similarly, you need to configure the remaining two converters: the first is tuned to the Amos satellite, frequency 10722, speed 27500, "H" polarization, and the second to the Hotbird satellite, frequency 11034, speed 27500, "V" polarization.

Channel setup

The process of tuning satellite dishes to any other satellites is similar, at the request of the user. This will require information about their location and approximate frequency.

After completing the antenna setup and achieving a good signal level, you can start searching for channels on the set-top box. This requires run scan, after which a list of all available channels will appear.

Connection nuances

When installing and connecting satellite equipment, there are a number of nuances that need to be considered. The main ones will be discussed below.

F connector connection

TV cable attaches to all devices with F-connector. To connect it, first cut off the upper insulation by 10-15 mm and bend the shielding braid under it onto the cable. Then you need to cut off the second layer of insulation and open the central core.

Next, you need to wind the F-connector onto the TV cable over the screen so that the core of the cable protrudes 2-3 mm beyond its edge. Then it is necessary to cut off the shielding braid protruding beyond the edges of the F-connector. The cable prepared in this way is connected to the converter, TV or disk.

Diseqc (or disk) - a device that is required to connect several converters. From each converter to the disk you need to bring a cable and connect via F-connector. In the same way, the cable from Diseqc is attached to the receiver.

Advice! Disek should be carefully hidden from moisture during precipitation. Cable junctions do not need to be wrapped with electrical tape, as this will lead to the formation of steam. It is better to use heat shrink, it fits much tighter to the cable and F-connector.

Multiswitch connection diagrams

A multiswitch or switch is a device designed to for signal propagation from one dish to several receivers, be it a receiver or a TV, and at the same time provide devices with independent viewing of different channels in different polarizations.

On a note! Some multiswitches allow you to send a signal to one TV receiver from several independent satellite dishes, as well as from an on-air street or indoor antenna.

The length of the cable from the antennas to the multiswitch can reach up to 50 meters, and from the switch to receivers or TVs - up to 100 meters. With a large length or many joints amplifiers recommended., they will help compensate for the loss of signal.

The connection diagram is as follows. Wires from all antennas converge to the multiswitch, are connected, after which the cable leaves the switch to the connected devices (set-top boxes or television panels). Their number can vary from 4 to 80.

Multifeed is a device that is used when installing additional converters on a satellite dish in order to achieve the correct angle and required height in relation to the center head. The use of several converters is relevant when the satellites are close to each other, and the angle between them is no more than 10 °. In this case, the main converter is tuned to the satellite from which the weakest signal, because only part of the antenna reflector works for additional heads.

Supral antennas are the most common in the Russian Federation. The multifeed assembly for them looks like this:

• a clamp assembled from two halves is attached to the converter and pulled together with a connecting bolt;

• a clamp with a head is attached to one of the slats, after which it must be tightened with a bolt;
• a bar with a fixed clamp and an empty bar are installed perpendicularly into the adjusting bracket and tightened with screws;
• a free adjusting bracket is fixed in the head holder on the satellite dish, and a bar with the assembled multifeed is inserted into it at an angle of 90 °.

The location of the multifeed in relation to the central converter depends on where the satellites are. For adjustment tightening or loosening the screws on the brackets. After the converters are configured, all connections must be carefully tightened.

Common mistakes and ways to solve them

When connecting satellite television, the following mistakes are often made.

1. Incorrectly selected plate diameter antennas. This may result in poor signal quality during changing weather conditions. To fix the problem, it is worth replacing the plate.
2. Incorrect installation of the traverse for mounting converters. It should be fixed not on top of the bracket, but under it, in otherwise there may be problems with the signal even on the main head.
3. Application through sockets. In this case, the signal may be completely lost. They should be replaced with terminal ones that come with television.
4. Using splitters. They are only suitable for analog TV. Usually satellite channels are broadcast in two polarizations, which the splitter is not able to miss. As a result, some of the content on one of the TVs will not be available.
5. Lots of connections and cheap cable. It also leads to signal loss or degradation.
6. Insulating the dyseak with a plastic bag or using duct tape for winding joints. All this will lead to the formation of condensate. For connections, it is better to use heat shrink, and it is recommended to put the dysek in a waterproof box.
7. Taping the F-connectors. It is also better to close them with heat shrink to avoid the formation of moisture and, as a result, rust. A protective cap must be put on the free exit of the dyseka.

As you can see, every person can install a satellite dish with their own hands. The main thing is to know the correct sequence of actions and avoid mistakes that are constantly encountered during the installation of such equipment.

Best Selling TVs of 2018

TV LG 43UK6200 on Yandex Market

TV Sony KD-55XF9005 on Yandex Market

TV LG 49UK6200 on Yandex Market

TV Sony KD-65XF9005 on Yandex Market

LG OLED55C8 TV on Yandex Market

Not so long ago, to view any channel satellites, it was necessary to have not only a special antenna, but also a receiver, which is a receiver. Today, thanks to the latest developments, you can view Tricolor channels without it. Most modern TVs already have a built-in tuner that supports the necessary standards, as well as a slot for a CI module. Correct setting The antenna allows you to receive signals from operators, so a receiver prefix from the Tricolor provider is not required.

Antenna connection and module installation

To watch TV channels Tricolor TV antenna is connected to the F-connector, which is located near the conventional terrestrial antenna.

This option has several advantages:

• minimum number of wires;
• only the remote control from the TV is enough to control;
• no need to look for a place to install the receiver;
• no need to buy a satellite receiver.

To decode the Tricolor channels, it is enough to install a special smart card, as well as a module, without which you can watch only the minimum number of channels that are open. Removal or installation of the module is carried out only when the equipment is turned off. The CAM module with the card is mounted in the PCMCI slot, with the barcode facing the screen.

TVs that already have DVB-S2 tuners installed are able to support these modules. They are a device in which a Tricolor card is installed and all this is inserted into the connector from the TV. After the module is installed, the cable is connected and the TV itself turns on in search mode. The satellite signal transmission source is set in the menu and the channel search starts. The system determines the channels, remembers them, but in this case only informational TV channels are open. These actions are carried out to check the functionality and compatibility of the module and the TV.

The next step is to register the contract and activate the access card without a receiver. The procedure is carried out on the official website of the Tricolor TV provider, where the channel package is selected, the card and contract number is entered. At the same time, CI + is put in the field with the inscription "Terminal model". This application is sent for further verification and registration with the operator's company. During this time, the TV must remain switched on on any scrambled channel of the selected package. Within two hours, an automatic connection occurs.

Module and manual setting

The Tricolor module, which works without a receiver, allows subscribers to view channels at any time. It is a kind of replacement for additional equipment. However, in this case, there is one main condition - the presence of an appropriate connector on the TV. In modern TVs, it is always present. You can determine the location of this connector using the instructions from the TV. Operator satellite channels allows you to watch channels through the module in HD format High Quality or digital SD.

To manually tune the Tricolor channels without using any receiver, you need to turn on the manual setting on the TV in the corresponding menu. You also need to set the modulation parameters - QAM 64. The transmission rate should be 6900 KS / S, after which the search is turned on. This procedure is also performed for frequencies from 144000 to 394999KHz.

The main purpose of the module

The module used in the TV has several important purposes:

• it allows you to decode channels;
• protects against unauthorized viewing attempts;
• transmits a high-quality signal;
• saves space;
• reduces power consumption due to the fact that there is no receiver.

Due to its features and easy installation, it is now becoming more and more popular. At the same time, it can decode one radio signal or a Tricolor TV signal. At the same time, the system itself can only support card identification numbers that have fourteen digits.

In addition, the presented map ensures correct operation when viewing the Optimum package. You can buy the module at official store satellite television operator Tricolor TV with various configuration options. You can also order various satellite equipment and necessary services.

The best operator in Russia

Tricolor can rightly be called one of the most modern operators in Russia, which is trying in every possible way to offer its subscribers only the best services at competitive prices. The choice of packages is really small, however, each of them includes a large selection of different channels for children and adults. I am very pleased with the affordable prices for the packages offered - it is enough to pay from 150 to 900 rubles only once a year and you don’t have to worry about anything. For a small cost, each subscriber will be able to watch their favorite TV shows and movies in the highest quality.

Tricolor TV has been operating for more than fifteen years and offers customers a variety of equipment and service support. And now customers can use a completely new and very convenient service for viewing satellite channels without additional equipment - it is enough to purchase only a module that is inserted into the TV. There is nothing superfluous - no waste of money, no wires, no unnecessary equipment. Subscribers have only one thing left - to enjoy a high-quality signal and a wide variety of channels from Tricolor.

More recently, connect home tv to watch television channels from a satellite, it was possible only to a dish antenna through a special receiver - a satellite receiver. Is it possible to get satellite TV without a dish and without a receiver?
It is now possible to view satellite television without receiver. Many modern TV models have a built-in digital tuner with support for the DVB-S2 standard, and a special slot for installing a CI + access module. With a connected and properly configured satellite dish, the TV receives signals satellite operator and allows you to watch satellite TV without a receiver set-top box. The antenna cable from the satellite dish must be connected with an F-connector to a special antenna input located next to the input of a conventional terrestrial antenna.

Undoubtedly, this connection convenient for several reasons:
1) No need to purchase additional device- satellite receiver.
2) No need to free up space in the interior for its installation.
3) Only one TV remote control is needed for viewing, not two. It is much more convenient to use - you do not need to grab different remotes, besides, they have the ability to get lost and fail.
4) The number of wires connected to the TV is reduced.

produced by many well-known manufacturers of television equipment: Samsung, LG, Philips and others. The external difference of the satellite receiver on the TV is the presence next to the input of a conventional antenna, another antenna input with a threaded connection for the F-connector. However, the presence of a second tuner does not always mean the ability to connect a satellite dish. The same input is used to connect digital broadcast channels DVB-T or cable channels DVB-C. Only the presence of a DVB-S or DVB-S2 tuner in the characteristics of the TV means the possibility of receiving satellite television channels. Often, such an antenna input is combined for all types digital signal and is designated DVB-T/T2/C/S/S2. The S2 standard is more modern, but TVs with a built-in satellite receiver standard S, receive both standard and high-definition HDTV television signals.

To decode channels, you need a CAM module and an access card. Without this module, it is only possible to view an extremely limited number of channels broadcasting without encoding in the public domain. All TVs with a DVB-S2 digital tuner support CAM modules - a device into which a satellite TV operator card is inserted, and which, in turn, is inserted into the PCMCIA TV connector.
After installing the module, you need to connect the cable from the satellite dish to a special TV socket using the F-connector. Next, you need to start the TV to search for satellite channels.
In the TV menu, you must select the input signal source: terrestrial TV, cable TV, satellite - put a tick in the appropriate box. We search for satellite channels at all frequencies. TV finds a large number of channels and stores them in its memory, while only information channels are open for viewing. At this stage, the functionality of the module inserted into the pcmcia slot is checked, the compatibility of the CI + card with the TV is checked.

Next, you need to register the contract and activate the purchased conditional access card. On the provider's website, you must select a package of television channels, enter the contract number and smart card number. In the "Terminal model" field, select CI+.
After sending the application for registration, you must leave the TV turned on on one of the encrypted channels of the program package you have chosen. Connection occurs automatically within two hours.

TV with two satellite receivers

TV models with two satellite receivers allow you to watch two channels of satellite TV at the same time in PIP mode, or record one channel while watching another.
To watch a satellite channel and record another channel at the same time, you need to connect two identical cables from the satellite dish to the TV directly without a receiver. Connect the first cable from the satellite dish directly to the SAT 1 connector, and the second cable to the SAT 2 connector. To do this, use coaxial cable with the corresponding F-connector. Check the location of the satellite dish before starting the installation. During satellite installation, select "Dual tuner" mode.

Manually tuning the TV to satellite channels without a receiver

To manually tune satellite channels without a receiver, select MANUAL TUNING and DIGITAL CHANNEL on the TV remote control in the MENU section. In the FREQUENCY parameter, enter the value 144000 KHz, in the MODULATION parameter enter the QAM 64 value, in the TRANSFER RATE parameter set the value to 6900 KS/S. Search for channels.
This tuning procedure must be repeated for frequencies 122000, 130000, 138000, 154000, 162000, 298000, 394000 KHz.

CAM module Tricolor

CAM module Tricolor allows you to view satellite channels on modern TVs with a CI slot. Thus, it replaces the necessary additional equipment - a digital receiver, a tricolor card is inserted into the TV as in satellite receiver. An additional condition for viewing satellite channels without a receiver is the presence of a DVB-S / S2 digital tuner in the television receiver. Such a tuner is installed in almost all modern mid-range TVs currently being produced. You can check this according to the technical specifications in the instruction manual for the TV. CAM module Tricolor allows you to receive transmissions both in standard digital quality SD and in high quality HD television image format.

It has the following purpose: decoding TV channels in MPEG2\4 format, protected from unauthorized viewing by the operator's conditional access system. The Tricolor CI+ module is Plug and Play, its installation is simple and straightforward. With its help, one television or radio channel of Tricolor TV is decoded simultaneously. The system supports only 14-digit identification numbers of smart cards Tricolor TV type xx0245хх…xx

Satellite TV without receiver NTV plus

Set satellite tv without receiver NTV+ allows you to watch NTV plus satellite TV channels on modern TVs. Necessary condition is the presence in the television receiver of a digital DVB-S2 tuner and a special Common Interface CI + slot, into which an NTV card must be inserted. Thus, there is no need for a special satellite receiver, it is enough to install a special dish in the satellite's visibility zone, set to position 36E. Then you need to insert into the slot TV CAM module with a conditional access card installed in it, and enjoy watching NTV satellite channels.

How to set up satellite TV on TV?

How to set up satellite TV on your TV ELENBERG? There is a socket for connecting a dish, but I can’t even find instructions for it anywhere.

Often we are approached with this question, and, as a rule, owners of TVs that are not among well-known brands turn to us. Such devices can quite well receive conventional television channels and have acceptable image parameters. But, the presence of a satellite tuner does not at all mean the possibility of stable reception of this type of signal.
Television operators transmit the signal on different channels and with different technical specifications: for reception on S or S2 tuners, using the CI module various versions, with different bit rates. For stable reception of modern television from a receiving antenna directly, without a receiver, it is necessary that the TV has the following parameters:
The presence of a digital built-in satellite tuner DVB-S2.
The presence of an interface for connecting electronic modules CI new version CI+ (CI Plus).
Requires a properly working software Software of the latest version.
Support 45000MHz signal bit rate. The conditional access card must be placed in the module so that the chip is facing away from the barcode sticker on the CAM module.
Insert the module, with the card installed into it, into the special slot of the pcmci TV with a barcode to the screen. Installation completed.

Corner of history!

Yes, that's what I wrote in 2013! In a word, a few lyrical memories, or what we worked with not so long ago.

• No separate receiver needed.
• No HDMI to HDMI connection cable needed
• No separate remote control needed.

But, you can forget about the "ball", which is not a disadvantage for owners of official access cards.

But if the TV has a built-in digital tuner that supports the DVB-S2 standard, this means that the TV will receive (if the antenna is correctly tuned to the satellite) the signal of satellite channels.

TV with built-in satellite receiver, however, be careful:

Here, confusion can sometimes occur, because other tuners with similar names are also built into the panels, which have nothing to do with satellite TV.

So:

- The tuner for terrestrial digital broadcasting is called DVB-T2 or DVB-T (not suitable)
- The tuner for cable digital broadcasting is called DVB-C (not suitable)
- The tuner for satellite digital broadcasting is called DVB-S2 or DVB-S(Fits)

The letter T stands for terrestrial TV, the letter C for cable, and the S for satellite. As you can see, the difference is only in one letter, and the tuners are completely different.

Installation of antenna equipment does not differ from a standard installation using an external receiver.

TVs with built-in satellite receivers can easily scan channels both manually and automatic mode, but only non-scrambled channels will be shown.

Almost all modern TVs with a built-in satellite tuner support the DiSEqC 1.0 protocol, which means that you can receive a signal from at least four satellites using a 4x1 DiSEqC switch.

One ... just a satellite receiver and antenna built into the TV will not be enough.

The fact is that almost all television channels broadcast from satellites do not go to open format, but in one encoding or another.

AS PLUS in Crypt On, Tricolor TV in DRE Crypt, NTV+ and many erotic operators in Viaccess, Raduga TV and Continent TV in Irdeto, Telekarta in Conax and etc.

And therefore, having installed an antenna and tuned the channels of one or another operator on your TV, instead of the long-awaited high-quality image and your favorite program, you will see only an inscription something like “Code Channel” on the screen.

To solve this problem, you need to purchase and install in your satellite TV decoding device - the so-called access module ()

You mean that 90% of satellite TV channels are encoded!

And so ... TV with built-in satellite receiver

NTV + Viaccess CI + conditional access module for setting up NTV-Plus channels on DVB-S2 TVs of various brands.

Let's start with Samsung, for example:

To get started, it is advisable to reset the TV to factory settings:

Menu > support > self-diagnosis > reset > ok.

After the reboot, go to the menu> channel> antenna> select the value "satellite".

We uncheck all satellites that are set by default (if this fails, you need to pull the CAM module out of the slot and reset the TV again).

We scroll and select the EutelsatW4 36E satellite, in the LNB settings we select the transponder 12130 R, the lower gene. LNB - 0, upper - 10750.

Then we go to "manual settings", look for the transponder 12130 R, turn on "network search" and press "search".
We are waiting for the completion of the search for NTV-Plus channels and saving the channels found.

You can then sort the channels to your liking with some sort of …Channel List Editor

If there is no EutelsatW4 36E satellite in the settings, do this:

Select "User sat 1".

We create our own satellite (put a bird in front of it) and save it.

We go into the LNB settings and configure the parameters: DISEqC - off.
lower gen. LNB-10750
top gen. LNB-10750
Tone 22 kHz. — Auto
We don’t put anything in the “transponder” section, we will add them manually. Next, exit this submenu, go to the "manual setup" section, see our newly-minted satellite and click "scan".
In the "transponders" section it will be empty, select "create".

We need transponder frequencies, bit rate and polarization type for each channel package.

11785 R, 11862 R, 11900 R, 11938 R, 11977 R, 11996 L, 12015 R, 12092R, 12245 R, 12284 R, 12322 R, 12341L, 12380 L, 12399 R, 12265 L, 12437 R,
12456L,12476R,DVB-S2/8PSK11823R,12073L,12130R,12207R

Attention!

These frequencies have SR 27500 FEC 3/4 Set polarization type correctly (L) or (R)

We continue ... we drive in the frequency (with numbers directly from the remote control), the transmission speed (also from the remote control) and select the type of polarization (L or R). Click "save".
The network name "NTV-PLUS" appears, click "search" and "OK".

The channel package for this transponder has been scanned and saved to the TV's memory. Then everything is repeated for each subsequent transponder.

In the same place, in the “manual setup” menu, click “scan” in the “transponder” section, create the next one with your data, and so on. All previous filled and scanned transponders with settings and channels are saved.

As a result, we get all the channels of NTV-PLUS.

Instructions for setting up an LG TV

Connect the cable coming from the antenna from the converter to the connector on the back of the TV marked "SATTELITE"

Press the "SETTINGS" button on the remote control, and select the "CHANNELS" item in the drop-down main menu.
Click "OK"

In the opened, use the down arrow on the remote control to select "Program mode", press the "OK" button on the remote control. In the drop-down list, select and put a dot on opposite the inscription "Satellite", go to the inscription "OK" and press the "OK" button on the remote control.

We refuse automatic search.

Select "NO".

In the "CHANNELS" window, select "Satellite settings" with the down arrow on the remote control and press the "OK" button.

The Satellite Setup window opens.

Go to the "Satellite" field with the default satellite indicated by the down arrow on the Remote Control.

In the “List of satellites” window that opens, select the “EUTELSAT 36 A / B 36.0 E” satellite, press “OK” on the remote control.

Return to the window with the settings for the satellite. In the Satellite Setup window

Be sure to specify the parameters:

LNB Frequency: Must be 9750/10600 for two CC LNBs.

For single band (11.70-12.75 GHz) 10750 circular polarized converters.

LNB Power" - "ON"

Other parameters are determined by the scheme of connecting the TV to converters and antennas.

Selecting "Close" returns you to the "CHANNELS" window.

In the "CHANNELS" window, select " Manual setting»Press the OK button on the remote control.

In the appeared window "Digital satellite TV" with the active field "Transponder" press the button to the left of the remote control.

In the “Transponder” window that opens, press the red button with a dot in the center on the remote control (“Add” function) and go to the window with the list of transponders, the red button with a dot on the remote control.

In the "Add transponder" window Enter the parameters for the transponder. xxxx frequency. Polarization Rightxxx
Symbol Speed ​​(kS / s) 27500. DVBS2 transmission. Select and click on "OK"

In the "Transponder" window with a list of transponders, an active entry xxxx,R,27500 will appear.

Press the "OK" button on the remote control. A window will open. In the opened window "Digital satellite TV", with the parameters in the active field "Transponder" - xxxx, R, 27500, go to the inscription Add and press "OK" on the remote control.

If everything is done correctly, the TV's built-in tuner will find x TV channels. By pressing Close, we get to the "Transponder" window. By pressing the EXIT button on the remote control, we switch to the TV viewing mode.

This completes the setup of the TV cam module on the TV.

Other brands of TVs with a built-in DVB-S2 tuner and a CI + slot are configured according to a similar scheme presented in the description for setting up cam modules in a TV in this article.

To configure the reception of the Tricolor TV satellite signal, use the following transponder parameters:

frequency	polarization	standard	modulation	symbol speed	correction mistakes

Each of the 14 transponders is configured separately. However, if when entering the first transponder, the operator's network was defined or identified as Tricolor or NTV Plus, then an automatic search can be performed in which all the operator's transponders are determined and configured.

To configure NTV-PLUS satellite signal reception, use the following transponder parameters:

For the West region (Eutelsat 36A/36B (W4/W7) satellites):

frequency	polarization	standard	modulation	symbol speed	correction mistakes
	R(V)
	R(V)
	R(V)
	R(V)
	R(V)
	R(V)
	L(H)
	R(V)
	L(H)
	R(V)
	R(V)
	R(V)
	R(V)
	L(H)
	R(V)
	R(V)
	L(H)
	L(H)
	R(V)
	R(V)
	L(H)
	R(V)

For the East region (DirecTV-1R/Bonum-1 satellites):

frequency	polarization	standard	modulation	symbol speed	correction mistakes
	R(V)
	R(V)
	R(V)
	R(V)
	R(V)
	R(V)

If your antenna is configured and connected, then the parameters of the entered transponders, as well as the channels found, will be recorded on the TV and saved.

But do not score about the cable:

Cable connections can cause interference on the TV screen, reducing signal quality if:

— cable length exceeds 50 meters;

— the cable is bent at an acute angle;

- the cable is joined from separate pieces (The situation is especially worse if cable segments of different thickness and quality are used);

- a flat adapter cable is included in the cable, which is clamped in the window frame (I strongly advise against using this thing - it sharply "sets" the signal);

— poor quality cable, with a thin inner core, does not provide a tight contact when connected to the receiver or to the "DiSEgC" switch;

- the cable is docked not with a standard coupling, but with a "collective farm" twist;

- a low-quality cable is used that is not adequately shielded (metal braid and foil).

The cable does not pass the signal at all if:

- F-plugs at the ends of the wire are wound incorrectly or, due to the influence of dampness and oxidation of the metal, there is no normal contact;

— the cable is damaged;

- the cable is connected to a wall outlet designed for cable television;

The cable can cause poor switching of channels with different polarization if:

The cable is joined from separate pieces (The situation is especially worse if cable segments of different thickness and quality are used).

Disadvantages in the work of the kit associated with the plate.

The slightest deformation of the dish can lead to a sharp deterioration in the signal. Dish size is not the only criterion that determines the ability to receive a signal from several satellites.

Of great importance is the shape of the dish and the wind resistance of all its elements. In any case, it should not shake or even vibrate in the wind, not to mention the deviation from the satellite.

More or less like this.

I’ll add ... I wrote the article due to the fact that Philips, which was not at all old (TV, satellite and working computer monitor), refused to work and the repair was approaching half the price of a new one.

Bought (LG 32LA620S) with built-in satellite receiver!

Friends, during this time I have already changed two working TVs! On the this moment I work for samsung. He is a 4K TV and in addition, a monitor for a computer!

Approximately such an excursion into, if you have such a TV, then everything written in the ideological sense is correct, however, transponder parameters have changed a lot.

Good luck to you!

Today, televisions in which there are receivers are very popular. These devices can be used to connect Built-in receivers appear in documents as a "DVB-S/S2" receiver. As a rule, most models with this function are produced with liquid crystal. The most common manufacturers are LG and Samsung.

with a receiver?

In the case of built-in receivers, attention must be paid to back panel TV. Regardless of the model, there must be an LNB IN connector. It is designed to connect a satellite dish. Additionally, an LNB OUT output must be present. With it, you can connect a second receiver to the TV.

There is a VIDEO connector for the video signal. His job is to provide average image quality. You can't hear without AUDIO sound signal wherein. The stereo headset connects directly to the TV or amplifier. Internet port will allow you to enjoy the benefits local network. Additionally, you can connect to a personal computer. Lastly, Smart TV is checked on the TV. The audio signal comes through this connector. In turn, the picture on the screen must be of good quality.

Setting up a TV with a receiver

Setting up the satellite DVB-S2 tuner built into the TV is quite simple. AT different models The menu is slightly different, but in general the instructions are the same. Setting up satellite TV in Samsung TVs as follows. First of all, you need to go to the menu. There should be a "Broadcast" tab. Through it, you can go directly to the channel settings. When choosing a subsection satellite system, the TV will ask for an owner pin. Manufacturers default to 0000.

After a successful transition, you can select the LNB settings. At this stage, you need to check if the system has found satellite signal. If this does not happen, then you need to select the DiSEqC mode. Next, you can enter the menu and select a satellite signal. After all that has been done, all settings are saved without fail.

LG TVs with receiver

All TVs with a built-in satellite receiver from LG are produced with interesting backlighting. Screen resolutions in different models are very different. Generally, Smart TV is supported. Additionally, good viewing angles should be noted. Tuners are mostly installed analog and digital. The average screen refresh rate is 50 Hz. In this case, the refresh rate is in the region of 100 Hz.

The audio system in the TV, as a rule, is set to two-channel. The power of one speaker is an average of 5 watts. Video signals are supported from 480p to 1080p. For convenience, manufacturers equip models with various connectors. With their help, you can connect headphones, speakers or personal computers.

Model LG 24LB450U with receiver

This LG LCD TV with built-in receiver has a resolution of 1366 by 768 pixels. The backlight is included in this model. The viewing angle of the TV is 178 degrees. The tuner analog and digital available. Image processor - "Triple". The sweep frequency is 50 Hz. A special decoder is installed in the TV audio system. With it, the sound is more voluminous.

All major video formats are supported by this model. Among other things, there are a large number component inputs. Standard antenna connectors are provided. Additionally, there is a digital optical audio output. With a stand, the dimensions of this model are as follows: height 556 mm, width 384 mm, thickness 140 mm. The mass of the device is 3.7 kg. The cost of the model on the market is 12,000 rubles.

TV LG 22LB450U

The resolution of these LCD TVs with built-in are 1366 by 768 pixels. At the same time, the viewing angle is quite large. It should also be noted good range The image processor is installed in the "Triple" series. The panel refresh rate is 50 Hz. In this case, the update parameter lies within 100 Hz. The color system supports all major standards.

The audio system is installed two-channel. This model has two 5W speakers. There are various sound and optimization modes. This model also boasts a wide range of video signals. Among other things, it should be noted the presence of expansion slots. A standard IPS-matrix is ​​provided by the manufacturer. The cost of this model is 10,000 rubles.

What is the difference between Samsung TVs and receivers?

TVs with a built-in Samsung satellite receiver, as a rule, differ in their functionality. At the same time, it provides various options contrast. The resolution of many models is in the region of 1920 by 1080 pixels.

The image processor is "Hyper". Among other things, a good refresh rate should be noted. There is a picture-in-picture mode. Another thing worth mentioning is the color system. It works on PAL, SECAM and NTSC format standards. Video signals are received by the TV in the range from 480p to 1080p. An optical digital audio output is installed on most models. The power consumption of Samsung TVs is acceptable. The average of the devices lies in the region of 106 V. When using the economy mode, only 45 V is consumed.

Model "Samsung UE40H5270"

These TVs with a built-in satellite receiver have a resolution of 1920 by 1080 pixels. Contrast system - "Mega". Additionally, many will appreciate the pleasant backlighting of the TV. Smart TV support is provided. There are also two tuners available.

Image processor installed class "Hyper". With it, the refresh rate increased to 100 Hz. There is a two-channel audio system with stereo sound support. A USB port is provided by the manufacturer. There are also jacks for connecting to a TV. personal computer. The dimensions of this model are as follows: height 908 mm, width 558 mm, and thickness - 190 mm. The total weight of the TV is 8.3 kg. On the market, it will cost about 30,000 rubles.

Summarizing

As a result, we can say that TVs with a built-in satellite receiver are undoubtedly needed and in demand. They are quite simple to set up, and anyone can handle it. The models presented above are quite different from each other. The LG 24LB450U TV is in the greatest demand. In pursuit of best quality images can be viewed models "Samsung". The TV shown above is a pretty good choice.