home > Internet > How to connect someone else's wi-fi. How to connect to wifi without knowing the neighbor's password

How to connect someone else's wi-fi. How to connect to wifi without knowing the neighbor's password

Today, almost every second person uses the Internet. It could be like home network, and unsecured or secure wireless. Often users are interested in a completely logical question about how to connect to WiFi without knowing the password? Many can say with certainty that this is impossible, but the thing is that everything is not so simple here. In fact, nothing is impossible, so we will tell you how to do it.

Some general information

As practice shows, not everyone sets a password on their Internet. In this case, you do not need to invent anything, and you can freely use it without worrying that they will find out about it and password-protect the connection. Please note that, for example, in large companies they almost never set up protection, it is clear why, it is not very convenient, and data entry takes time. But we have a different situation: an evil neighbor has set a password, and we want to go online. First of all, make sure the password is worth it. To do this, just enter any combination, if the connection is interrupted, then we need a sniffer. That's exactly what we're going to talk about.

How to connect to WiFi without knowing the password

To do this, you need to download special software. As noted above, we will use a sniffer - a program whose main purpose is to catch information packets. Today, there are a whole bunch of similar utilities freely available on the Internet, for example, Shark. Dealing with this software is not difficult. When you make the first launch, you will realize that you can intercept quite a lot useful information. Here you can find out the IP address of the recipient of the data and, in fact, the sender. Based on this, it will be possible to set up your computer for a successful connection. In principle, in the near future we will work with IP addresses. But it's not as easy as it might seem at first glance. First, the wireless internet we are about to hack needs to work. Secondly, it will be good if it is actively used, this is due to the fact that at this time just a huge number of information packets are transmitted, and this is all we need.

WiFi router: password is not a problem

So, let's try to change the network address of our computer. This is done in order to make it "native" for the router. A lot depends on what operating system you are using. Although the principle is the same. It lies in the fact that the network address of the computer or laptop is exactly the same as that of the router. However, the last digit must be left unchanged, because we are talking about a unique network address. The subnet mask can be left unchanged. As an illustrative example, we present the following information. With the help of a sniffer, you received the following address 192.168.5.2, in addition to this, you also have a subnet mask of 255.255. 255.0. You make your address exactly the same, but the last digit remains the same, and you leave the mask the same, although it usually matches. In principle, we have almost managed to connect to WiFi. This cannot be done without a password, so it must be cracked.

The final step of removing protection

So, we figured out the addresses. As you can see, there is nothing complicated here. We have very little to do, and then we can rejoice. First, you need to find a decent password cracker. Since connecting to WiFi without knowing the password and without hacking it is unlikely to work. There are many such programs. Most of them are not specifically aimed at opening the protection of wireless Internet, but account passwords in games, in social networks etc. But we'd better use software like Comm Viev for Wi-Fi. The utility is completely free and extremely easy to use. Intuitive interface will help you quickly figure it out. But the thing is that we already have all the necessary data. This is the network address and information packet of the router. Then the program will do everything for you. For a WiFi password, they come up with different combinations of letters and numbers, but the degree of protection depends on the chosen encryption method.

Conclusion

As noted above, much depends on the degree of protection, that is, the chosen encryption option. There are three in total. If something like WPA or WPA-2 is used, then you are unlikely to succeed, if only because you will not be able to see the network, even if you know for sure that it is. In this case, dancing with a tambourine will not help you, here you need the participation of a professional hacker, and such services cost decently, so it makes sense to think about the advisability of such an activity. If we are not talking about intensive consumption of traffic, then it is likely that it is easier to ask the owner for a password. There is a good chance that there will be no problems, especially if you need access for work or study, and not downloading 20 gigabytes of movies a day. Well, that's all that can be said about how to connect to WiFi without knowing the password. There is nothing complicated here, but sometimes it does not make sense, and modern routers are protected quite reliably, so it is very difficult to “open” them. But if you really need it, you can try.

This article reveals the secrets of hacking someone else's point WiFi access.

Navigation

This article will tell you how to connect to someone else's WiFi access point, as well as how to use it, and what rules to follow.

A generation of Internet users are wondering "How to connect to someone else's WiFi?» . And it's not just like that, but in connection with the onset of a temporary crisis that began not so long ago. And the development of the Internet is gaining momentum every year.

How did the Internet become the object of saturation of our lives?

After all, as we remember, before access to the Internet was available only to some, and then it was intended for viewing Email. Now we can notice that almost every second person has the Internet connected at home, and therefore it is simply pointless to deny that the Internet has become our friend. But as you know - all of us people are lovers of freebies, whatever one may say, but the fact remains.

Therefore, today we will analyze and tell how to get free internet.

What is the danger of using someone else's WiFi?

It should be understood that hacking or finding out the password from someone else's WiFi access point is punishable by law, and therefore, in order to stop and somehow punish such hackers, it was introduced article 274 of the Criminal Code of the Russian Federation, which states that liability arises for violation of the rules for the operation of storage and processing facilities, as well as data transmission over information and telecommunication networks. Therefore, it is always worth understanding and first thinking with your head whether it is worth doing this at all, since for this you can very easily get the article that we described above.

How to connect to someone else's WiFi?

Actually, if you have already decided to act, and you really do not have the means to connect to the Internet, and subsequently pay for it monthly, then let's get started.

So, the whole method consists only in obtaining a WiFi access point key. As you know, for this, on the Internet there are a huge number of programs that will help you hack WiFi.

What needs to be done?

Well, first you need to download two programs, namely Dumpper and JumpStart.

Download dumper and jump start can from here
Now, our task is to scan WiFi access points, that is, to search for

The next step, you need to go to the tab WPS, and click on "Todas lad redes", now we start scanning again and see that networks with WPS encryption have appeared, these are exactly what we need to carry out hacking

Now copy WPS PIN and then install the program jumpstar
We start the program jumpstar and follow me
Choose "Join a wireless network" and then press "Further"

After choose "Enter the PIN from my access point", and it is in this field that we paste the copied by us WPS PIN code, and of course we remove the checkbox from "Automatically select the network"

Now choose net, which we have previously defined for hacking

We expect possible connection to the access point. The connection time is different for everyone, it took us less than 5 minutes

Ready! We are connected to someone else's WiFi!

In support of this, here is a snapshot of the fact that we are connected to a hacked access point

How can I find out the password if I'm already connected to someone else's WiFi?

To find out the password from someone else's WiFi, you only need to take a couple of steps, but for this you must be already connected to it.

So let's go to "Network Control Center", and then go to the settings of the network to which you are connected

Now we click on "Wireless Network Properties"

Switching to a tab "Safety" and find out the password by enabling the parameter "Display input characters"

What are the rules to follow if you are connected to someone else's WiFi?

Minimize network load. First, the most important rule to strictly adhere to is that you use someone else's WiFi to a minimum, that is, downloading and loading the network as little as possible.

After all, if your neighbor notices that the Internet is very slow, and this is very noticeable when you download something via a torrent or browser, then he will clearly turn to the provider, which, as a result, will send working staff to the house. That's when you can have big problems, up to fine in the amount of 250,000 rubles.

Use a VPN. It is especially important to use masking if you are connected to someone else's WiFi, as thanks to a VPN, your computer will be difficult to recognize on the network.

Hide MAC address. This rule must also be strictly adhered to, because if it is not hidden, then you may well be visited by "People in Blue", and then you will definitely get the full, starting with the fact that you will be taken away from the device through which you entered someone else's WiFi, up to a penalty in the form of an administrative fine.

Therefore, if you adhere to all the rules that we described above, then nothing threatens you, but still be extremely careful and do not risk your fate for the sake of a freebie.

This is where we will probably end our article in which we have given ways to connect to someone else's WiFi access point, as well as the rules that must be followed if you still decide to use the Internet at someone else's expense.

Video: How to connect to someone else's WiFi hotspot?

The situation when the Internet is desperately needed, but it is not, happened to everyone. Moving, forgot to pay for the Internet or are visiting - the situations are different and there are many of them, what should I do?

The simplest solution that comes to mind is to open the list of available networks and look for one that does not require a password. So we connect to the Internet and do whatever we need to do - and no one will know and get hurt, right?

No not like this. Firstly, even if someone foolishly left their network open, using it without the knowledge of the owner is simply not fair! Maybe because of you, your neighbor will slow down the broadcast of football with your favorite team? Secondly, open access points may not be secure, and may also be created maliciously.

Cons of Free Wi-Fi

Fake WiFi networks

Every time you connect to "free Wi-Fi", you need to be extremely careful. Cybercriminals often create fake Wi-Fi networks on purpose to steal logins and passwords of connected users. Most often, such points can be found in crowded places like bars, shopping centers and city parks, but no one guarantees that Lena Internet's home network actually belongs to Lena.

The owner of such a "point" may be a local troll, collecting a collection of logins, passwords and other personal data - about credit cards, Internet subscriptions and favorite social networks of neighbors.

Safety? What security?

When one of the neighbors leaves his network open, most likely, security is the last thing he cares about. If you can connect to it, then anyone else can too.

Thus, by connecting to such a network, you automatically become a hostage to your neighbor's Internet habits. If his system is infected with viruses, then your device may suffer. Here all hope is only on your antivirus.

Low speed

Do you like it when the movie you are watching in the online cinema constantly freezes? Of course not. This usually annoys everyone.

Sitting "on the tail" of a neighbor's Wi-Fi network, you will not only use the speed that he has chosen for himself, but also share it with all devices connected to his network. For example, your neighbor is watching an online series, his wife is downloading a movie melodrama in HD quality, and their child is playing world of tanks. It is quite logical that you will download the last season of your favorite game from a torrent tracker for ages. Moreover, as a result of such a massive connection, everyone will have a terrible Internet.

Everyone loves pizza, ice cream and other tasty treats. But let's be realistic: tasty and free food is served only in fairy tales - on self-assembled tablecloths, which are very rare even there. AT real life self-collected tablecloths with free pizza are even rarer. This is equally true when it comes to other "free" things like neighborhood Wi-Fi. Chances are, you won't be the only person in the house who wants to use the insecure Internet.

You can keep company pizza and ice cream vendors, teenagers who live opposite, as well as upstairs neighbors - all four apartments. All these people will just as willingly connect to the point if it is open or protected. simple password(like Masha for "Masha's Internet" or 12345) because it's so easy to guess.

The problem is that it is impossible to say exactly who was online at any given time. Since someone else's Wi-Fi is the weakest link in your system's security, every connection to it is like Russian roulette. In this game, you bet that no one on the network is stealing other people's data or infecting their devices by clicking on dangerous links or installing malware. Probability ... well, something like in Russian roulette. That is, it is not worth playing more than six times for sure.

It's worth it?

Your devices are probably full of valuable data: files from work, family photos, correspondence with friends, and so on. And all this can be accessed by jailbreaking the device. Do you really want to risk that data simply because you didn't pay for your own Wi-Fi?

If you ask me, I will say No! Stealing your neighbor's Wi-Fi is not only illegal, but also quite unsafe.

It is better to choose a suitable tariff, especially since it is not so expensive, protect your network with a strong password and install a good security solution. We, of course, recommend Kaspersky Internet Security.

Most likely, most users do not even realize that their routers have wi-fi without a password - this is WPS (or QSS) technology.

In short, and plain language, then WPS (Wi-Fi Protected Setup) is a technology that is designed specifically to simplify the connection of devices to WiFi networks.

What is the WPS button on the router for and how to use it?

The button is needed to activate WPS technology. There is such a button on almost all routers. It is signed as a WPS rule. It looks something like this on a D-Link router.

Not infrequently, the button is combined with the reset function of the router. This is very common on TP-LINK routers.

Be careful, do not long press the "WPS/RESET" button. After holding it for about 5 seconds, your router settings will be reset to factory settings.

And on new routers from the company ZyXel, the WPS function enable button looks like this.

In order to connect an Android smartphone to a Wi-Fi network via WPS, you need to go to wifi settings on Android and click on the button with three dots.

This will open a small menu. Here you need to select "WPS Button". Clicking this button will start the WPS connection process. In fact, this button in the menu emulates pressing the WPS hardware button.

After that, a connection indicator will appear on the screen.

Now there is only press the WPS button on the router and keep it pressed for about 3-4 seconds.

After that, the Android smartphone will think for about 10 seconds and a message will appear on the screen stating that you have connected to the selected Wi-Fi network.

On the desktop computer connecting via WPS is even easier than on an Android smartphone. For example, let's demonstrate how this happens on a laptop with an operating Windows system 10.

To get started you need click on the Wi-Fi icon on the taskbar. After the list of available networks opens, you need to find the network to which you want to connect, select it and click on the button "Connection".

After that, a window for entering a password will open. If WPS is enabled on the router, then under the line for entering the password it will be written that you can connect to the network by pressing the WPS button on the router.

Hello, I decided to write a short article today for all conscientious people who use someone else's Wi-Fi Internet and decided to ask search engine whether they can determine that they are using someone else's Wi-Fi and what it could be.

In fact, the topic of open Wi-Fi (I have networks that are not password protected) is very popular. There are many different jokes about this, about good neighbors who do not set a password for Wi-Fi, etc. There are two types of open Wi-Fi (I came up with this myself):

Open WiFi in shopping malls, cafes, restaurants, etc.
And unsecured Wi-Fi networks in residential buildings when wifi router you haven’t got it yet, but the neighbor has already installed it, but either he forgot to set the password for Wi-Fi, or he doesn’t know how, in extreme cases deliberately left the network open.

If in the first case everything is clear, you came to a cafe, then you can connect to their network, as they say, everything is legal. But the second case is much more interesting. Your device finds an open network in your home, but it's not yours. You connect and start using the Internet. Suspecting that this is Vasya's network from above, or Petya from below, but somehow it's all the same, what a joy it is :).

Use your free wireless internet and one day comes to you no, not a neighbor with a bat, and conscience, well, or fear, and behind it the thought, and what will happen if a neighbor somehow calculates me and finds out that I am using his Wi-Fi network. He will stop being friends with me, and if he wasn’t friends anyway, then he can pile on :), of course I came up with this, it could be worse :).

If you have already looked at that article, you probably realized that you can find out who is connected to a Wi-Fi router, just go to the settings and go to the tab DHCP – DHCP Client List. What information is displayed there? Well, your address is definitely not there, there is only an IP address, which does not mean anything, there is also a MAC address, which is also unlikely to give you the name of your device.

If your computer is named, for example, Andrey (in Russian letters), then in the list of connected devices, it will most likely be displayed with incomprehensible characters. If your name and surname are written in Cyrillic in the name field on your computer, then most likely your neighbor will see it and immediately go to beat you :).

What can happen if they find out that you are connected to someone else's Wi-Fi. It seems to me that in 40 percent of cases, no one will even look at who is connected to the router there. Another 20 percent will look, but they will not understand anything. And 40 percent of those who read my article, the link to which I gave above, will find and block “illegally” connected devices.

This means that the worst thing that can happen if you are found out is that they will simply block you and you will no longer use free wifi the Internet.

I won’t write about how bad it is to do this, or vice versa, that they say connect. This is the decision of everyone, and I have no right to advise something in this matter. It may seem to someone that this article is about nothing. I just wanted to somehow give an answer to a very popular question about connecting to strange, open Wi-Fi networks. I would like to highlight the word "open" networks, because if you hack the network and connect to it, then this is a slightly different matter, the article is different :). Good luck!