I can’t unlock my iPhone 6, what should I do? How to Unlock iPhone - Complete Guide

Happens to everyone. I came up with and set a password on my iPhone, and then forgot it. Or you haven’t used your smartphone for a long time. Be that as it may, it is better to know what to do and how to unlock your iPhone if you forgot the password.

In this guide, I will describe three ways to reset your iPhone password. These methods will not help if, only contacting Apple support will help.

If the password is entered incorrectly 6 times, the iPhone will be blocked for one minute; if you enter the wrong password again, the iPhone will be blocked for 2 minutes, then 3, and so on. In general, it’s not realistic to guess the password; life won’t last long.

If you have the “Erase data” function activated, then guessing the password is dangerous. This function will erase all information from your iPhone if you enter the password incorrectly 10 times. To disable it you need to: go to settings – password – opposite the “erase data” field, switch the toggle switch to disabled mode.

Below are three ways to reset forgotten password on iPhone, here they are...

1. Reset your iPhone password by restoring it from a backup.

If you systematically sync your iPhone with iTunes, you should have and can restore one of the copies where the password is still set. This is the best way, all media files and information will remain on the iPhone.

2. Reset your password using Find My iPhone

If you have the Find My iPhone function activated, you can use iCloud to remove the lock password, however, all data will also be erased. This method works if you forgot your iPhone lock password, but remember your Apple iD password.

Now you can restore iPhone data from a backup or set it up as new.

3. How to reset iPhone if you forgot your password

If you've never synced your iPhone with iTunes, don't have a backup, and don't have Find My iPhone enabled in iCloud, your only option for removing the passcode is the recovery mode method. I note that this method always works, but not only the password will be erased on the iPhone, but also all media files and information.

Step 1. For iPhone start must be entered into

To enter recovery mode: turn off the iPhone, now hold down the Home button and without releasing it, insert the USB cable, an iTunes icon with a cord should appear.

Step 2: If iTunes doesn't open automatically, open it. You should immediately be prompted to update or restore your iPhone.

Step 3. Select “Restore” and wait for the recovery to complete. At the end of the process, the iPhone will be “clean” as if it came from a store and without passwords. Use it!

Still have questions?

Do you still have questions about unlocking your phone if you forgot your iPhone password? Are you having trouble recovering a forgotten ID on your iPhone? Write in the comments and we will try to help you!

If none of them helped you the listed methods or you don't remember your Apple ID! Read this manual

Hello everyone! An interesting situation happened to me recently - in order to respond to a comment, I needed to dig into the settings of my iPhone and see if it was possible to set restrictions on a certain program in iOS. As usual, I open “Settings - General - Restrictions”, run into the sign “Enter the password code for restrictions” and understand that I simply do not remember these treasured four digits!

Of course, in the end everything ended well, but this situation made me think about this... If even I, a person who constantly tinkers with the iPhone and iPad, somehow managed to forget the restrictions password, then what can we say about regular user, who uses this setting once a year, and only on major holidays?

Most likely, many will not even remember the fact that they installed this code at all. Not to mention some numbers. And now what i can do? So you can walk around without access to all the settings? Of course not. There are two options for solving this problem. Go!

By the way, remember - there is no “factory”, “factory”, “standard” password. The code is set by the user himself when opening the restrictions settings for the first time.

Now let's go for sure! :)

Method number 1. Completely remove the password

There is only one way to remove the code without knowing it - through firmware recovery. There is nothing complicated about this:

But this method has some very big disadvantages:

• Yes, you will get rid of password restrictions. But absolutely all information will also be deleted from the device!
• Thinking of restoring data from a backup? There are also some “problems” here. After all, if a copy was created at a time when the code was already installed, then when it is restored, the restriction password will return to the device.

In general, the method works, but is not very convenient - there are too many reservations when using it. Luckily, there are other options...

Method number 2. Find out the code

Yes it is possible. And most importantly, we don’t even need to strain our memory and remember a forgotten password. A special program will do everything for us!

This very program “pulls” the code from the backup copy. Accordingly, there must be at least one copy on the computer, which includes the restrictions password. If you don’t have one yet, just do it.

Victory! All that remains is to remember them and never forget them :) And finally, a few questions and answers:

• Is this a safe program - can it be used at all? Can. Especially considering the fact that it is openly posted on GitHub (the world's largest resource for hosting IT projects and their joint development).
• With which iOS versions works? I checked it works on iOS 10, 11 and 12 - everything is fine. However, judging by the description, absolutely any firmware version is supported starting from iOS 7 (inclusive).

As you can see, everything is very simple, multifunctional and safe. Nothing complicated! However, if something doesn’t work out for you or you still have some questions, be sure to write in the comments, we’ll try to figure it out together and find a solution!

Updated! I completely forgot one very important thing when using the PinFinder program. Since the password is “pulled” from the backup copy, you need to remember this - this same backup copy should not be encrypted. Otherwise, PinFinder will swear and throw an error. How to remove encryption? It’s simple – connect your iPhone, launch iTunes and uncheck the corresponding menu item.

However, on this moment this setting (encryption) is no longer relevant, since...

Updated 2! To be honest, I didn’t even expect such attention to my modest blog, but the author of the program (Gareth Watts) wrote in the comments (for which I thank him very much!) and said that it was released a new version PinFinder 1.6.0. Declared support for encrypted backup copies– now you don’t have to disable encryption in iTunes to find out the password iPhone restrictions. Simply great!

Updated 3! A new version of the program has been released - PinFinder 1.7.1. What's new? Support for iOS 12 has arrived - now you can find out the “Screen Time Passcode” (formerly “Restrictions”) without any problems. Hooray!!! True, in iOS 12 Apple slightly reworked the security policy and now the Screen Time passcode can only be retrieved from an encrypted backup. Remember this and be careful!

P.S. Everything worked out? A huge request - do not be lazy to write a couple of lines in the comments about how you removed the password code for restrictions. Thank you!

P.S.S. The instructions helped, but too lazy to write anything? Please like and press the buttons social networks– the author will be very grateful! Thanks again!

A password on the lock screen is one of the best ways to protect your device from being hacked by other people. On an iPhone, you can set two access password modes: a simple code (4 digits) and a more complex code word (using symbols, signs, numbers). Very often users forget set password and, as a result, cannot access the smartphone. Let's take a closer look at several options on how to reset and disable the password on an iPhone.

There are two ways to reset the passcode in iOS:

• Using the desktop version of iTunes;
• Via iCloud.

Reset a forgotten password via iTunes

If the user has forgotten the password on the iPhone and cannot remove the lock screen, you need to use a computer. To begin, put your phone into DFU mode: simultaneously hold down the Home and Power keys. Do not release the keys for 10-15 seconds. Then release Power and also hold Home. Externally, the state of the phone will not change in any way; only the iTunes application can recognize the mode.

Connect your phone to your PC and open previously installed program ITunes. Wait a few seconds for the application to recognize your device. With DFU mode enabled, the program will automatically enter recovery mode.

On your computer keyboard, click on Shift and, without releasing the button, click on the “Restore” item in the program.

Reset via iCloud

To reset using the iCloud service, you must be connected to the Internet through an active Wi-Fi network. If your phone is connected to the Internet, a wireless network icon will appear at the top of the lock screen.

To complete further steps, you will need another phone or computer with Internet access. Go to the official iCloud website through a browser. Please login. Next, open the My Devices page. IN context menu Make sure that the “Online” mode is indicated next to the IPhone icon.

Click on the device name. In the drop-down window, click on “Erase iPhone”. Enter your Apple ID password and wait for the reset process to complete. The screen on the phone will go dark and after a few minutes the apple sign will appear. This means that the device has begun the over-the-air recovery process. After turning on your iPhone again, sign in to your Apple ID and set New Password blocking (you can also skip this step so as not to enter the access code in the future). To restore user files, use device backups in iTunes or iCloud.

Remember! After resetting your password via iCloud, the Lost iPhone feature will be disabled for your phone. If your phone is lost, it cannot be tracked online. You can re-enable the function after setting a new device access code.

Disabling the password

After performing the reset, you need to disable the password in the iPhone settings. Afterwards you will no longer need to enter a code to unlock your device. Open the menu and select the Settings icon. In the window that opens, click on the “Touch ID and password” field.

Click on the line “Turn off password”. Also enable the "Simple Password" slider - if you choose to set new code access, you won’t need to come up with complex combinations of symbols; you just need to set a combination of 4 numbers.

A lock password is a preventive measure that protects your iPhone or iPad from being hacked. Use it to protect personal data from unauthorized access. From the article below the cut you will learn: what is a lock password, how to set a password longer than 4 characters, when the iPhone is temporarily locked, how to reset the counter of incorrect attempts and how to enable and remove the lock password on the iPhone, iPod Touch and iPad. Beginners will find it useful, advanced users will find the material useful for reference.

How does locking an iPhone with a passcode work?

When turned on iPhone lock or iPad password, the desktop (Home Screen) of the device is completely blocked. When you press the “Home” and “Power” buttons, a lock screen known as “Lock Screen” appears on the device’s display.

All you can see on the lock screen is the status bar (at the very top), date and time. Unlocking an iPhone by swiping right at the bottom of the screen brings up a form to enter a lock password (4-digit by default). And in order to go to the desktop and access the device’s capabilities, you must enter correct set characters.

On the lock screen, you can activate the “Control Center” (turned on in the settings in the menu of the same name), this will allow you to turn on Wi-Fi and connect to known wireless networks automatically (without unlocking the device), launch useful utilities in everyday life: flashlight, timer, calculator, camera and AirDrop function.

A vulnerability was found in iOS 7.0-7.0.4 that made it possible to bypass the lock password and call any application running in the background through the control center on the locked screen.

Simple iPhone Lock Password

A simple password consists of only 4 Arabic digits; letters and special characters are not available. It turns out that there can be 10,000 options for such a set. Not a few, isn’t it? And if you take into account periodic time blocks for 1, 5, 15 and 60 minutes, it will take a very long time in case of incorrect attempts.

Complex lock password

In some places, Apple pays great attention to the protection of personal data, as well as the devices themselves, from hacking. With one swipe of a finger, a simple 4-digit code turns into a real nightmare for a hacker. It’s easier to sell a locked device for scrap than to find such a password.

IN iPhone settings in the "Touch ID and Password" menu - for devices with Touch ID and "Password" - for all others, turn off the "Simple Password" switch and you will be able to lock the device with a password of unlimited length, consisting of numbers, upper and lowercase letters, as well as special characters. For fun, count the length of a complex password and provide the information in the comments. Thank you!

The number of options for such a password is hard to imagine and there is no need for it, a 4-digit one is enough. Moreover, complex password It's easy to forget and to unlock your iPhone you'll need it, losing all your contents.

Temporarily lock your iPhone when you enter the wrong password

If there are 6 incorrect attempts to enter the lock password, the device is temporarily blocked for 1 minute: no actions are available except emergency calls, including retrying to enter the password.

Each subsequent incorrect attempt increases the iPhone lock time by 5, 15 and 60 minutes, and as soon as you enter the wrong password for the 10th time in a row, the device will be permanently locked. Until the iPhone is connected to a computer that is allowed access to the device, entering the password will not be possible.

How to reset the counter for invalid lock password attempts

You can reset your iPhone's temporary lock when you enter the wrong password. If you have access to which the device has been synced at least once, this is easy to do.

If you connect your iPhone to a computer with which it has not previously synchronized, you will not be able to reset the counter; to do this, you must allow the computer to access the contents of the iPhone.

You need to confirm permission on the device itself, but the problem is that you can’t unlock it and, accordingly, you can’t authorize it.

Calculating the time to manually brute force a simple iPhone lock password

Let's assume that the iOS device is not permanently blocked on the 10th incorrect attempt. To manually search through 10,000 options you will need:

• Every 9 options: 1+5+15+60=81 minutes.
• 10,000 options: (10,000/9)*81~90,000 minutes, or 90,000/60=1500 hours, or 1500/24=62.5 days. And this does not include the time spent on input.

As you can see, even a 4-digit code is not easy to find. Once again, it is unnecessary and even dangerous to activate a complex lock password on your iPhone.

How to Enable iPhone Lock Passcode

To set a password:

When the password is active, access to the Touch ID & Password menu is blocked.

As an additional protection in the same menu, it is provided for 10 incorrect attempts. Turn on the “Erase Data” switch if you are sure that no one else will try to unlock your iPhone.

How to disable the lock password on iPhone

If you have access to the device settings and for some reason you want to disable password protection (for example, you give the device to a child for a while), you can do this there in Settings in the “Touch ID and password” menu.

Tap on “Turn off password” and confirm your decision. Then enter your current password and decide what to do with the iCloud Keychain (KeyChain): turn it off on the device and delete all passwords, or continue to use it. Personally, I always select the “Continue with keychain” option, then I won’t need to re-enable the keychain in the iCloud settings.

As you can see, several simple actions and iPhone, iPod Touch or iPad are securely protected. It is almost impossible to find a simple 4-digit password by manual brute force, so use the iOS device lock carefully. If you forgot security code or it was installed without your knowledge (the same child) - .

I invite you to comment - ask questions, complement, criticize.

04.09.2016

Many users of Apple brand devices prefer to provide their gadget and the information it contains additional protection by setting a complex password on the lock screen. However, such an unpleasant situation can happen to each of us when the iPhone password is hopelessly forgotten.

To avoid future problems and wasting time restoring it, it is best to write it down and store it in a safe place. What to do if you forgot your iPhone password? Apple is committed to the safety and security of confidential information And Money, has taken great care to provide a fairly complex password reset process that allows the user to be identified as the owner of the device. Therefore, we can say with confidence that Apple’s security system is impeccable. The solution to the problem depends on the model of the apple product. It is also necessary to consider which password was forgotten. There are several types of them on iPhone:

• From the lock screen;
• From account Apple ID;
• On restrictions.

What to do if you forgot your iPhone password for the lock screen and the device is locked?

The lock screen password is designed to protect your device data. If you enter the wrong password six times in a row, the device is blocked for a while, after which the message “IPhone is disabled” appears on the screen.

If you can’t remember your password, you can use three methods:

• Using iTunes;
• “Find iPhone” function;
• Use recovery mode.

Using iTunes

iTunes will help solve the problem if the device was previously synchronized with this program. To recover your password you need to:

• Turn off the device;
• Connect iPhone to PC using USB cable included in the delivery set;
• Enter the device into Recovery Mode;
• Open iTunes;
• When the message “iTunes has detected an iPhone in recovery mode...” appears, click the “OK” button;
• After this, you need to restore the device by clicking on the “Restore iPhone” button.

• If a message appears asking you to check for iPhone software updates, click the “Check” button.
• After this, you will be prompted to restore factory settings, and the old data and password will be deleted. You must click on the “Restore and Update” button
• When the IOS assistant asks for settings and recovery of contacts and other data, select “Restore from iTunes copies" This method is appropriate if you have previously synchronized data. IN otherwise It will not be possible to restore personal data, and you can use the “Set up iPhone as a new device” option.

Restored this way IPhone way with factory settings or restored from a backup will no longer contain the screen lock password.

Find My iPhone feature

If the Find My iPhone function was enabled on the device, you can remotely erase all data, including removing the password. To do this, you need to go to the link icloud.com/#find, check whether the function is enabled. At the top of the browser, find the “All devices” menu item, select yours and click on the “Erase” button. Deleted data can be restored from a backup using the Settings Assistant.

Use recovery mode

Recovery mode will help if you have not previously synchronized your device with iTunes, the Find My iPhone function has not been enabled, or if you do not have access to a computer. In order to put the device into recovery mode and delete data and password, you must disconnect all USB cables from the device. Turn off your iPhone and press and hold the Home button until the Connect to iTunes screen appears. After this, the program should report that a device has been detected in recovery mode, click the “OK” button, and restore the iPhone.

What to do if you forgot your iPhone password for your Appstore account?

The Apple ID is the username that is used to various actions from IPhone: allows you to access the support website, make purchases in iTunes Store, Apple Store, use the iCloud service.

1. You need to open the page https://appleid.apple.com/ru/, go to the “Reset Password” page

1. Enter the ID and click on the “next” button. If your Apple ID is forgotten, you need to follow the “Find Apple ID” link, where you will be asked to enter information - full name, e-mail, click on the “next” button.

1. To reset your password, you must complete one of the suggested steps:

• answer Security Question, enter a new password and click on the “Reset Password” button;
• pass authentication by e-mail (in this case, the password will be sent to the main or additional e-mail address specified during registration), follow the link in the letter and enter a new password, reset the password;

• follow two-step verification (if it was previously enabled). To do this, you must enter a trusted device to which the confirmation code will be reset. Enter the recovery key, specify a new password and click on the “Reset password” button.

If none of the proposed methods work and you cannot recover your password, you can contact Apple support www.apple.com/ru/support/ or call +7 495 5809557.

Features of solving the problem if you forgot the password on IPhone 4, 5, 6

Recovering a forgotten password on iPhone 5 and 6 has no fundamental differences; to do this, just follow the instructions described above. Resetting a password on an iPhone 4 with an older operating system has its own characteristics.

Password recovery on iPhone 4

If you lose your screen unlock password, you can reset the password by synchronizing your device with your computer, which will allow you to recover data without using the screen password.

1. Enter the device into DFU mode. To do this, you need to reboot - press the power button and “Home” for ten seconds.
2. When the logo appears on the screen, release the Power button while holding the Home button. After this, an image will appear on the screen USB connections and a prompt to enable iTunes.
3. A message appears about restoring the device; you must click on the “Restore” button.

After performing the restore, the phone will be reset to factory settings and all data stored on the device will be lost. Therefore, the most the best way secure data - saving backup copies that will allow you to restore contacts and media files.

It is worth noting that the Internet offers a lot of methods designed for devices with the operating system IOS 5.1, 6.1, which allows you to bypass problems in the Apple security service by dialing the phone emergency service, and then dropping the call and blocking the device. There are also software based on the ICCID vulnerability of the iPhone, for example Chinese program SAM. That's all today system errors in older versions operating system iOS has been fixed by the developers, so these methods do not work and are unsafe, so using them is not recommended.

It is best to use legal and proven methods, only they can be considered reliable and highly effective.