Delivery optimization what kind of folder how to delete. What to do if "Service Host: Local System" loads the system

On Windows 10 and earlier versions, when working, you may notice sharp OS freezes, lags, and incorrect operation of applications. An experienced user will immediately have the idea that in Windows some process loads the entire OS, although a separate component can also be loaded: HDD, processor or memory. As an example, let's take a look "Service Node: Local System" that loads disk, memory, and even the network.

The problem itself can be easily detected in the task manager. We open it using the combination "Ctrl + Shift + Esc" and look at what loads the disk, processor or memory.

"Service Host: Local System" has other processes in the set, disabling or restarting which may resolve the issue. These are the processes:

Update centre- when downloading and installing updates, the likelihood of a load on the disk will be high, so this option is worth checking;

Superfetch– optimizes Windows work for more quick start software. A possible process failure could lead to an increase in the load on the components (Read:);

Push Notifications are notifications that appear on top of all open windows, even when the application is disabled. Windows 10 also has this option. For some, disabling the service helped get rid of the problem.

Service Node: Local System Loads Disk

The easiest way to get rid of problems in Windows is to restart the computer, after which the configuration components should no longer be loaded. If you have already done this, then the problem is a little more serious. Let's move on to the next method:

Stopping the above services

In order not to search for services manually, you can use short commands. To do this, open an elevated command prompt and enter the following phrases to disable Push Notification, SuperFetch, and Update Center services:

• net stop wpnservice
• net stop sysmain
• net stop wuauserver

If you noticed that the loading process stopped and the system began to work smoothly, then the reason was indeed in one of these services. Unfortunately, this effect is temporary, as after restarting the computer, the problem may reappear. To prevent this from happening, you will have to disable the launch manually:

• Press the combination Win+R to open the "Run" window and enter the command services.msc to enter the services section;
• Looking for SysMain services, Update Center and SuperFetch ;
• In the properties of the services in the "Startup type" section, use the parameter "Disabled" and apply the changes.

If this does not help to solve the problem, try using the Process Explorer utility. It shows the current processes that load the system the most, it will come in handy as well as possible.

Returning the system to a restore point

This method makes sense if the existing restore point was created recently, a maximum of a week ago. To get to the recovery partition, in Windows search enter "Recovery".

Select an option and follow the instructions in the window.

Service node: local system loads disk loads network and memory

This problem can become a problem not only for disk media, but also for the network and RAM. If the problem is in the network, then there is some service that “eats” a lot of traffic, if with RAM, it is possible that there is some program or service in the background. In the first case, this is relevant for the Update Center, which can constantly download something and sometimes it is problematic to disable it. In any case, if it did not work out to cope with the problem, there are a couple of tips.

Restoring system files

Run the Command Prompt utility with elevated privileges and write the command to restore the system image:

DISM.exe /Online /Cleanup-image /Restorehealth

After the end of the process of the previous command, we already enter a friend who checks the OS for damaged files:

sfc /scannow

After completing the process of these tools, restart the computer. We observe in the task manager how the components behave, whether they are loaded or not.

Cleaning up the SoftwareDistribution folder with updates

If the result is negative, immediately enter into command line following:

net stop wuauserver
net stop bits

We restart the computer, and then, all in the same command line, start the disabled services:

We have analyzed many options to help get rid of disk loading, random access memory or the Internet to the maximum values ​​due to the service Service Host: Local System "(Service Host Local System).

Hello to all readers. Today we'll talk about what services can be disabled in Windows 10, although this system is not so demanding on computer resources. Services are programs that run in the background to keep your computer running smoothly. Some of them we rarely use, and some we don't use at all. These services can be disabled when the computer starts slower boot up and carry out their functions to improve performance operating system. And for those who have a low-powered computer, this is a good way to improve the overall performance of the system.
How to disable telemetry and data collection in Windows 10 read
In addition, some services are vulnerability to viruses, and this primarily applies to such a service, as remote registry. What can be turned off depends, of course, on the needs and tasks that the user performs on his computer, so here I have given as an example those services that I have disabled in my configuration.

How to disable unnecessary Windows 10 services

1. Right click on the icon A computer and select item - Control.

2. The program will appear in front of you Computer management.

Open section Services and Applications, then open the folder Services.
You can also use the keyboard shortcut Win+R, and then enter services.msc.
Services will open in front of you.
3. To do something with a service, find it in the list and twice
click left click on it, and then select what you want.
- Automatic- when you turn on the computer
- Manually- if necessary (the service will start itself)
- Disabled- Service loading disabled
Here I will show by example, disable Service "Delivery Optimization"

4 . Please see tab - Dependencies(which service depends)
because many processes have a common parent process or service.

5. To completely avoid problems when disabling services, it is advisable to keep the registry branch responsible for starting system services.
To do this, do the following:
Start - Run - regedit - OK. The Windows Registry will start.
In the registry follow the path:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services:
Select a folder in the left column Services

and through the menu File - Export - Save this branch.
Next, let's see a list of services that can be disabled or transferred to manual mode.

List of services in Windows 10 that can be disabled

1. Computer Browser - used to create a list of computers on the network and provide it to programs upon request. This service is only required for local network --Manually
2. Windows Search - In Windows 10 and earlier, computer content search works, and if you want to speed up the operating system, disable this service
search - Disable(But, there is one moment: if you are using Backup or Archiving using Windows, then put - Manually)
3. Work station– client for SBM connections, responsible for connection
to remote servers -Manually
4. Windows Biometric Service - If to login
you do not use fingerprint or scan - Disable
5. Secondary logon - Allows you to sign in to Windows with multiple accounts
records. If you are alone at the computer, then - Disable
6. Connection Manager remote access -Manually (if no local network Disable)
7. remote registry - Disable unambiguously
How to remove "tails" from remote programs read in the registry
8 . ktmrm for distributed transaction coordinator - Manually
9. Distributed transaction coordinator - Manually
10. NetBIOS Support Module - Manually
11. Setting up a remote desktop server - Disable if there is no local network
12. Download Service Windows images(WIA) - If you have a computer
connected scanner or digital camera, then do not touch anything, if not, then - Disable
13 . Bluetooth Support Service - If you do not use Bluetooth then - Disable
14. Remote Service Windows controls - Disable
15. Remote Desktop Service - Disable
16. AllJoyn Router Service - Disabled(I have another router)
17. SMS Router Service Microsoft Windows -Manually
18. Net.Tcp Port Sharing Service - Provides the ability to sharing TCP - ports by Net.Tcp protocol. If the computer is not being used as servers, then you can - Switch off
19. Smart Card - Provides access to smart card readers.
If there are none, then Switch off.
20. NVIDIA Stereoscopic 3D Driver Service - This service is for NVIDIA graphics cards. If you are not using 3D stereo images, then this service can Switch off.
21 . IP Helper Service - Supports network protocol IPv6- Disabled
22 . Listener home group- if you are not using a homegroup,
better - Switch off
23. Working folders - used to synchronize folders on different
devices - Disabled(generally turned off all synchronization, I don’t need it)
24. Sensor Data Service - processes and stores information received from sensors installed on a PC - Disabled I have (I don't have sensors)
25. Portable device enumerator service - responsible for the ability to synchronize and automatically play files from portable devices - Disabled I don't need it
26. BitLocker Drive Encryption Service - Provides the ability to encrypt drives. Disabled, not encrypted.
27. Diagnostic system node - Manually(will be needed if any problems arise with the computer)
28. Diagnostic Service Host - Manually
29. Windows Update - Manually I have
30. Xbox Live Network Service - Disabled(if you need for games, then Manually)
31. superfetch- Machine I have (I use for technology ReadyBoost)
32. telemetry- used to be "Diagnostic Tracking Service" now has a different name - Connected User Experiences and Telemetry (" Functionality for connected users and telemetry") - Disabled , this service "spy" on the user and in the background sends data to Microsoft
33. Service "Delivery Optimization" - Disabled "eats" almost half your traffic.(more about it at this link)

How in Windows Scheduler 10 disable tracking tasks, read
How to speed up and restore performance in Windows 10, read
What services can be disabled in Windows 7 and 8 read,
Perhaps that's all. If you know more options, how, what can be deleted - write in the comments. But still I advise you to do before disabling services restore point.
And if you are not sure about disabling a particular service, it’s better not to disable it, but set it manually, then when you start any program that needs some
service - the system will ask you for permission to start this service.

Hello to all readers. Today we'll talk about what services can be disabled in Windows 10, although this system is not so demanding on computer resources. Services are programs that run in the background to keep your computer running smoothly. Some of them we rarely use, and some we don't use at all. These services can be disabled when the computer starts slower boot up and carry out their functions to improve the performance of the operating system. And for those who have a low-powered computer, this is a good way to improve the overall performance of the system.
How to disable telemetry and data collection in Windows 10 read
In addition, some services are vulnerability to viruses, and this primarily applies to such a service, as remote registry. What can be turned off depends, of course, on the needs and tasks that the user performs on his computer, so here I have given as an example those services that I have disabled in my configuration.

How to disable unnecessary Windows 10 services

1. Right click on the icon A computer and select item - Control.

2. The program will appear in front of you Computer management.

Open section Services and Applications, then open the folder Services.
You can also use the keyboard shortcut Win+R, and then enter services.msc.
Services will open in front of you.
3. To do something with a service, find it in the list and twice
click left click on it, and then select what you want.
- Automatic- when you turn on the computer
- Manually- if necessary (the service will start itself)
- Disabled- Service loading disabled
Here I will show by example, disable Service "Delivery Optimization"

4 . Please see tab - Dependencies(which service depends)
because many processes have a common parent process or service.

5. To completely avoid problems when disabling services, it is advisable to keep the registry branch responsible for starting system services.
To do this, do the following:
Start - Run - regedit - OK. The Windows Registry will start.
In the registry follow the path:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services:
Select a folder in the left column Services

and through the menu File - Export - Save this branch.
Next, let's see a list of services that can be disabled or switched to manual mode.

List of services in Windows 10 that can be disabled

1. Computer Browser - used to create a list of computers on the network and provide it to programs upon request. This service is only needed on a local network -- Manually
2. Windows Search - In Windows 10 and earlier, computer content search works, and if you want to speed up the operating system, disable this service
search - Disable(But, there is one moment: if you are using Backup or Archiving using Windows, then put - Manually)
3. Workstation - client for SBM connections, responsible for connection
to remote servers - Manually
4. Windows Biometric Service - If to login
you do not use fingerprint or scan - Disable
5. Secondary logon - Allows you to sign in to Windows with multiple accounts
records. If you are alone at the computer, then - Disable
6. Remote Access Connection Manager - Manually (if no local network Disable)
7. remote registry - Disable unambiguously
How to remove "tails" from remote programs in the registry, read
8 . ktmrm for distributed transaction coordinator - Manually
9. Distributed transaction coordinator - Manually
10. NetBIOS Support Module - Manually
11. Setting up a remote desktop server - Disable if there is no local network
12. Windows Image Download Service (WIA) - If you have a computer
a scanner or a digital camera is connected, then we don’t touch anything, if not, then - Disable
13 . Bluetooth Support Service - If you do not use Bluetooth then - Disable
14. Windows Remote Control Service - Disable
15. Remote Desktop Service - Disable
16. AllJoyn Router Service - Disabled(I have another router)
17. Microsoft Windows SMS Router Service - Manually
18. Net.Tcp Port Sharing Service - Provides the ability to share TCP ports over the Net.Tcp protocol. If the computer is not being used as servers, then you can - Switch off
19. Smart Card - Provides access to smart card readers.
If there are none, then Switch off.
20. NVIDIA Stereoscopic 3D Driver Service - This service is for NVIDIA graphics cards. If you are not using 3D stereo images, then this service can be Switch off.
21 . IP Helper Service - supports IPv6 network protocol - Disabled
22 . Homegroup listener - if you are not using a homegroup,
better - Switch off
23. Working folders - used to synchronize folders on different
devices - Disabled(generally turned off all synchronization, I don’t need it)
24. Sensor Data Service - processes and stores information received from sensors installed on a PC - Disabled I have (I don't have sensors)
25. Portable device enumerator service - responsible for the ability to synchronize and automatically play files from portable devices - Disabled I don't need it
26. BitLocker Drive Encryption Service - Provides the ability to encrypt drives. Disabled, not encrypted.
27. Diagnostic system node - Manually(will be needed if any problems arise with the computer)
28. Diagnostic Service Host - Manually
29. Windows Update - Manually I have
30. Xbox Live Network Service - Disabled(if you need for games, then Manually)
31. superfetch- Machine I have (I use for technology ReadyBoost)
32. telemetry- used to be "Diagnostic Tracking Service" now has a different name - Connected User Experiences and Telemetry ("Functionality for connected users and telemetry") - Disabled, this service "spying" on the user and sends data to Microsoft in the background
33. Service "Delivery Optimization" - Disabled "eats" almost half your traffic.(more about this on this)

How to disable tracking tasks in the Windows 10 Scheduler, read
How to speed up and restore performance in Windows 10, read
What services can be disabled in Windows 7 and 8 read,
Perhaps that's all. If you know more options, how, what can be deleted - write in the comments. But still I advise you to do before disabling services restore point.
And if you are not sure about disabling a particular service, it’s better not to disable it, but set it manually, then when you start any program that needs some
service - the system will ask you for permission to start this service.

The update system in the operating system is based on P2P technology and works like a torrent client. Such a system is called Delivery Optimization Windows updates (windows update Delivery Optimization- WODO).

Windows Update Delivery Optimization allows you to receive Windows updates and apps from Microsoft Store from additional sources, not just Microsoft servers, such as other computers on your local network and computers on the Internet that download the same files. In addition, Delivery Optimization sends updates and applications from your computer to other computers on your local network or on the Internet.

When you download updates or applications while using Delivery Optimization, the operating system looks for computers on your local network or on the Internet that have already downloaded the update or application. Windows does not download the entire file from one source. Instead, the download is broken up into several smaller parts. Windows then receives parts of the update or application from computers that already have them, and other parts from Microsoft servers. Windows uses the fastest and most reliable download source for every part.

This feature creates a local cache and stores downloaded files in given cache within a short period of time.

Delivery Optimization cannot be used to download or send personal content. Delivery Optimization does not access your personal files or folders and does not modify any files on your computer. Delivery Optimization downloads the same updates and apps that you would get through Windows Update and the Microsoft Store.

Windows Update Delivery Optimization is only available in Home and Pro editions, and is not available in Enterprise and Education for security reasons.

By default, Delivery Optimization is enabled and allows you to send updates and applications from your computer to other computers on your local network or on the Internet.

To prevent Windows 10 from sending updates to the Internet, open " Windows Settings”, to do this, click on the taskbar button and select or press the keyboard shortcut + I

In the Windows Settings application window that opens, select the category Update and Security

In the window Extra options click on the link Delivery Optimization

In the window Delivery Optimization, you can completely disable sending updates by setting the toggle Allow downloads from other computers into position Off, or enable the exchange of updates only with computers in the local network by selecting the appropriate radio button.

Now Windows will not send updates to the Internet.

If you are using a metered or limited internet connection, Delivery Optimization will not automatically download and send parts of updates or applications to other computers on the internet.

Hi all! Once I wrote an article in which I told, but now 10k has already come out in full and today we will figure it out, what services to disable in windows 10.

What services can be disabled in windows 10?

How to disable services and how to enter them, I wrote, so I will not repeat myself. To disable unnecessary services in Windows 10, go to services, read what the service means and disable as unnecessary.

* BranchCache- The service caches network content. If you don't use home network, then you can turn it off.

*CDPSvc (Connected Device Platform Service) - this service belongs to the data collection series. It synchronizes the calendar, contacts, mail and other user data. I recommend disabling this service as a last resort to check if you need it or not. You'll most likely need it if you're using a Microsoft account and need to sync with your mobile device.

*CoreMessaging- Provides communication between components. The service is very controversial, because. There is no information on the web about it. You can disable it only through the registry and who disabled it, the system could no longer start. Let's leave this for now.

* DataCollectionPublishingService It's best to turn this thing off. This is the connection of the operating system with the remote cloud. The service collects, let's say, statistics of your actions.

* DHCP Client - If you use the Internet, do not touch in any case. It is this service that assigns you an ip address.

* dmwappushsvc- Again collecting information, we also turn it off. This is a keylogger. Transmits your key actions to the remote cloud.

* DNS client — It is also a necessary service for using the Internet. Works with your DNS (serves for the right directions).

* Enterprise App Management Service- service for corporate applications. You can turn it off, but if you use the office, for example, or Microsoft applications, then you need to experiment. Disable and see if everything will be fine in applications.

* KtmRm for Distributed Transaction Coordinator − transaction system function. We leave it the same.

* Plug and Play - serves to automatically recognize changes in the system. For example, when you connect a flash drive, this service wakes up ... So we leave it as it is.

* Quality Windows Audio Video Experience - transmission of audio and video over the network in real time. It is not needed only if there is no network (or Internet) in other cases, we leave it.

* Microsoft .NET Framework - All such services are left as is. They serve for the normal operation of most applications.

* SMP storage spaces- Again, a new service from a series of unknowns. I would turn it off and see how it works. This service allows you to manage disk space, but by disabling it, I could easily work with files and share disks.

* superfetch- A useful feature that works with the cache, speeds up Windows. This service has 2 sides, on the one hand it will run frequently used applications faster, on the other hand, there will be less RAM. Here I also advise you to test how much it will increase the performance on your computer. And users with SSD drive ami, I advise you to turn it off, because. The response from these discs is already crazy.

* Wallet Service- Again, the surveillance service, turn it off.

* Windows Audio - Controls sound. Turn off the sound if you don't need it. In other cases, leave.

* Windows Driver Foundation - User-mode Driver Framework - for the normal operation of the drivers, do not touch. Let it stay as it is.

* Windows Search - Indexing files for searching. If you do not use it and there is time to wait until the file is found, then disable it. On ssd, be sure to turn it off!

* Automatic setting network devices - needed to discover new devices on the network. If you do not use the network and the Internet, you can turn it off.

* WWAN Autoconfiguration - service to use mobile internet. If you use usb modem, SIM card in the laptop, then do not turn it off.

* Offline Files - helps to work offline with inaccessible files that have been downloaded before. We put it manually.

* AgIPsec Policy Entry - Required if you have a network and the Internet.

*WMI Performance Adapter - needed for services requiring wmi, set manually. If some applications need it, they will launch it themselves)

* Adaptive brightness control - We leave if there is a light sensor.

* Windows Backup - Disable if not in use. But it’s better to read about archiving in windows, you never know, you will use it.

* Windows Biometric Service - needed only when using biometric devices. In other cases, disable.

* Windows Firewall - To be honest, I always turn it off. I have nothing to steal) And if they encrypt the data, I will restore it) But I advise you to get, for example, Kaspersky Internet Security, which has both an antivirus and a firewall. And turn off this nafig, tk. it sometimes blocks what is not needed) In general, it monitors the security of your computer and closes ports so that thieves cannot get into your computer)

* Computer browser — No need for a home network. Manually.

* time broker- Coordinates background work for the WinRT application. Responsible for the operation of the Windows API. Therefore, if you do not know what it is, you can try to disable it, although you can disable it only through the registry. How to do this there is information on the Internet. For some users, this service eats up half of the processor resources, but after disabling, be sure to check the stability of the computer.

* System event broker - Again, for WinRT applications, also if you disable it, check the stability of work after disabling.

* DevQuery background discovery broker- Monitors applications in the background, it's better to leave it.

* Quick check - If necessary, checks for file system corruption. Also a controversial service, but it's better to leave it.

* Web Client - Useful if you don't have internet. Used to work with files on the Internet. We leave.

* Virtual Disk - Service for working with storage devices. We put it manually.

* IP Helper Service − Works with protocol version 6. I always disable it myself, so the service can be disabled altogether.

* Secondary login - Set manually, because. some games or programs will turn it on as needed.

* Application readiness- The service prepares applications for the first login or when new ones are installed. It is better to leave it manually, when it will be necessary, it will start itself.

* Grouping network members − Required for a home group. Set manually, you never need ...

* Dispatcher automatic connections remote access - We put it manually. Required for remote connections.

* Local session manager- Manages the user session. If disabled, the system may not boot, so leave it.

* Device Settings Manager- Set up and install new devices. If disabled, installation of new devices may not occur correctly. The service runs manually and starts when a new device appears. Therefore, we leave it as it is.

* Print Manager - Needed if there is something to print. In other cases, disable.

* Remote Access Connection Manager - manually. Once I disconnected it altogether and could not create a connection. So it's better to do it manually.

* User Manager- Manages multiple users. If you have one user, install manually.

* Xbox Live Authentication Manager- if there is no Xbox, then turn it off.

* Downloaded map manager- Disable when not using the Maps app.

*Network Member Identity Manager- We leave it manually, if necessary, start itself.

* Desktop Window Manager Session Manager − If you do not use transparency from Aero, then you can turn it off, it will give a big boost.

* Network Member Identity Manager - Required for the network. It's better to set it manually.

* Credential Manager - Better by hand. Stores your data, such as logins and passwords.

* Security Account Manager - Better to leave it as is. If you disable this service, then all changes in the local security policy will be lost.

* Access to HID devices - Access to keyboard shortcuts. Disable, if some combinations stop working, then put it back.

* Windows event log - records all events. A useful tool for the advanced user. It's impossible to disable.

* Performance Logs and Alerts - system service, leave as is.

* Software Protection - also a system service, leave it as is.

* CNG Key Isolation − Manually.

* Windows Management Instrumentation - The system service, without it, some applications may not work correctly, so it's better to leave it.

* Hyper-V Guest Service Interface − If you do not know what Hyper-V is, then disable it.

* Group Policy Client - We leave. Responsible for security policy settings.

* Changed Link Tracking Client − Tracking ntfs files, no need. Disable.

* Microsoft Passport Service Container

* Distributed transaction coordinator − We put it manually.

* SNMP trap - Some programs will collect information about you. So turn it off.

* Remote Procedure Call (RPC) Locator − Manually, if necessary, applications will launch it.

* Routing and Remote Access - Need not. Disable.

* IPsec Key Modules for Internet Key Exchange and Authenticated IP - Not needed, but better by hand.

* DCOM Server Process Launcher - System service, leave as is.

* NetBIOS over TCP/IP Support Module - If there are no other computers on the network, then manually.

* Configuring a Remote Desktop Server- If you are not creating a remote desktop server, then disable it.

* Immediate Windows connections- setting recorder - Manually.

* SSDP Discovery - Necessary for new devices, but such devices are not always found. Therefore, set it manually, and if not needed, then disable it.

* Discovery of interactive services − Manually.

* Orchestrator Service Update— Solution for managing workflows in the data center. Orchestrator lets you automate the creation, monitoring, and deployment of resources in your environment. Generally put manually.

* Internet Connection Sharing (ICS) - Not needed if you don't share your internet in network connections.

* Shell hardware definition − needed for the autorun dialog box of a disk or flash drive. To whom it is convenient, most need it. I left.

* Drive optimization- It is now called by a new name, I hope you know what it is. We leave it as it is, and if we have an SSD drive installed, then turn it off.

*Delivery Optimization It's kind of like a torrent. For example, download updates or applications from the store, then the download occurs from the sources found. Thus, the download speed increases. It is better to leave it manually, when any download occurs, it will turn on automatically.

* Remote Desktop Services User Mode Port Forwarder - If you do not use remote connections, then it is not necessary. Better put it manually.

* Food - Doesn't turn off. We leave.

* Task Scheduler - It is advisable to leave it as is, because. now many programs use it.

* Support for Control Panel Item "Problem Reports and Solutions" - Manually.

* Smart Card Deletion Policy - for smart card users, it is better to do it manually.

* Login Assistant account Microsoft - Helps you create and sign in to your Microsoft account. It's better to leave it manually.

* Network Connection Assistant - Notifications about DirectAccess are not needed, disable.

* Network Connection Broker- If you do not need notifications about programs in the store, then turn it off.

* HomeGroup Provider − To use homegroups. Better by hand.

* Wired autotune — Manually.

* Data archiving program- If you use backup and restore, then leave it as it is. If not, then disable.

* Microsoft Shadow Copy Provider - Manually.

* HomeGroup Listener − Manually.

* PNRP protocol - We also leave it manually. Some applications may use the service.

* Publishing Feature Discovery Resources − Needed if you want to show your files to other computers over the network. If you do not want, then manually or disable.

* Work station - it is better to leave, because some applications use this service.

*Working Folders- If you use working folders (they are usually used in organizations), then leave it as it is, if not, disable it.

* Certificate Distribution − Better by hand.

* Extensions and notifications for printers- If you use a printer, then leave it, if not, then turn it off.

* Extensible Authentication Protocol (EAP) - Manually.

* Windows Event Collector - Manually.

* Application Details - Manually.

* Server - If the computer is not used as a server or does not share files and printers, then disable.

* Tile data model server- If you use the metro interface, then leave it, if not, then turn it off.

* Xbox Live Network Service- again, if you do not use the Xbox, then turn it off.

* Network logon - Manually.

* Network connections - Leave as is. If there is no network or Internet, then you can turn it off.

* COM+ Event System - set manually. Applications that depend on this service will launch it themselves if necessary.

* System application COM+- Also manually.

*Microsoft Passport Service- If you don't have a TPM virtual smart card, disable it.

* Windows Push Notification Service- If you do not need notifications from applications, then turn it off. Leave it if you need it.

* SSTP Service - We leave it as it is, we need a service if there is Internet on the computer.

* Windows service License Manager - The service is needed to manage licenses for applications downloaded from the store. If you don’t download anything from there, then turn it off.

* Service Windows Mobile hot spot- The service is needed to organize a point WiFi access, i.e. distribute wireless Internet other devices. If you do not distribute, then turn it off.

* WinHTTP Web Proxy Auto-Discovery Service - If you need internet, then leave it as it is.

* WLAN AutoConfig Service - service for wireless networks. Accordingly, if they are not, it is not needed.

* Basic Filtering Service - on the one hand, it is not needed (if security is not needed), but on the other hand, some programs may generate errors. So we leave.

*Service wireless communication Bluetooth- Needed if you use Bluetooth headsets.

* Hyper-V Remote Desktop Virtualization Service- Again, if you don’t know what Hyper-V is, then turn it off.

* Windows Time Service - needed to synchronize time with the Internet.

* Geolocation Service- Turn off. It's only for phones. The Internet will find where you are

* Sensor Data Service- If you did not connect any sensors, then disconnect. Leave it on phones and tablets.

* Sensor Service- Same. Needed for phones and tablets.

* Store demo service- Disable, no need to demonstrate anything)

* Diagnostic Tracking Service- Service from a series of surveillance, so we turn it off.

*Shutdown Service as a Guest (Hyper-V)

* Windows Image Upload Service (WIA) - Need a service only if there is a scanner. It is responsible for receiving images from scanners and cameras.

* Hyper-V Volume Shadow Copy Query Service- Again, if you don’t know what Hyper-V is, then disable it.

* Windows Defender Service- With a good antivirus, this is an unnecessary service, but you can’t just turn it off here.

* Microsoft iSCSI Initiator Service - We put it manually, if the programs need it, they will launch it themselves.

* Network Save Interface Service - Required for normal network operation.

* Background Task Infrastructure Service- For the normal operation of background operations, leave.

* File History Service- A new way to protect files, with any changes, the files are duplicated. Disable or not is up to everyone. I probably would have turned it off, because. was not there before and was not needed)

* Windows Font Cache Service - serves to improve performance, caches fonts and does not waste time loading.

* Client License Service (ClipSVC)- needed for applications downloaded from the store. If you don't download anything from there, you can disable it.

* Service Windows Store(WSService)- If you use the store, then leave it, if not, turn it off.

* AllJoyn Router Service If you don't know what it is, then turn it off.

* Microsoft Windows SMS Router Service- This service is definitely not needed on a computer!

* Block Level Backup Engine Service − We put it manually. If backup or restore is needed, the service will start itself.

*Sensor Surveillance Service- If there are no sensors on the computer, then it is not needed.

* Network setting service- Better left by hand.

* Communication Service (Hyper-V)- Again, if you do not use Hyper-V, disable it.

* Net.Tcp Port Sharing Service - Disabled by default. It is necessary if only the Net.Tcp protocol is needed.

* Network Share Service Windows Player media- Manually. Need to turn on.

* Smart Card Reader Enumeration Service- If you do not use smart cards, then turn it off.

* Portable Device Enumerator Service - Serves to synchronize music, video, etc. with removable media. I would set it manually. This is not always necessary.

* Bluetooth Support Service - Required if you have Bluetooth.

* Diagnostic Policy Service - Needed to diagnose problems ... It honestly rarely helps. You can experiment with this by turning it off. Turn it on if needed.

* Program Compatibility Assistant Service - The service is needed to run programs that are incompatible with your OS. If not, set it manually.

* Network Inspection Service Windows Defender - Better again good antivirus than this service, but just don't disable it.

* User Profile Service - Better to leave. It works with computer user profiles.

* PNRP Computer Name Publishing Service - Required for home groups.

* Heart Rate Service (Hyper-V)- Monitors the state of the virtual machine. If you don't use virtual machines Hyper-V, then turn it off.

*AppX Deployment Service (AppXSVC)- If you are not using the store, then turn it off.

* Windows Error Logging Service - Logs errors. It is better to put it manually.

* Device Management Registration Service- Better left by hand.

* State Repository Service- it is better to leave the same manually.

* ETW Collector Service Internet Explorer - Another collector, turn off.

* Connected Network Awareness Service - It is better to leave it as it is, for normal network operation.

* Session Service virtual machines(Hyper-V)

* Touch keyboard and panel service handwriting — needed for tablets. If there is no touch keyboard or graphics tablet on the computer, then disable it.

* Time Synchronization Service (Hyper-V) - if there are no virtual Hyper-V machines turn off.

* Data sharing service- leave manually.

* Device Mapping Service- If the computer does not contact other devices via wired or wireless connections, then you can turn it off.

* Network List Service - It's also better to leave it.

* System event notification service − If you're not going to watch windows messages then you don't need it.

* Service remote control Windows (WS-Management) - Set manually.

* Windows Cryptographic Provider Host Service- Turn off.

* Device Installation Service- It is better to leave it as it is, a service for correct installation devices.

*Storage Service- it is better to leave manually.

* BitLocker Drive Encryption Service - Encrypts drives. If you don't use it, then disable it.

* Application Level Gateway Service − The service is needed only to work with the firewall. Manually.

* Cryptographic Services - To install new programs, it is better to leave it as it is.

* Remote Desktop Services - If you do not use remote desktops, then disable.

* Smart card - If you don't use them, then you don't need it.

* Still image acquisition events Needed to scan images. Therefore, if there is no scanner, then turn it off.

* RPC Endpoint Mapper − The service is needed for incoming traffic. Nothing can be done about her. On this we leave.

* Saving games on Xbox Live - If there is no Xbox, then turn it off.

* Finite Builder Windows points Audio- Leave it if you need sound.

* Microsoft Diagnostics Center Standard Collector Service (R)- Again the collector, turn off.

* Telephony - Leave manually. If needed, it will run.

* Topics - They eat a lot of memory resources. If not needed, disable.

* Volume Shadow Copy - Creates restore points, archiving in the background. Set manually. If needed it will run.

* Link layer topology − Also manually. If needed, it will run.

* Remote Procedure Call (RPC) − System service. Leave as is.

* remote registry - Allows remote users to manipulate your registry. Disable.

* Application Identity - Manually.

* Diagnostic system node - Problem diagnosis. Set manually.

* Diagnostic Service Host - Also manually.

* Generic PNP Device Node - Set manually. Not all PnP devices.

* Application Management - Set manually. The service allows you to set policies for applications.

* ActiveX Installer - Also manually. You need to install such an object, it will start itself.

* Windows Installer - Installing programs.msi. Manually.

* Windows Modules Installer - Installs and uninstalls components and updates. Manually.

* Fax - It is necessary if only there is a fax.

* Background Intelligent Transfer Service (BITS) - We leave manually. The service is useful.

* Performance counter library host- Shares performance counters with other users. Disable.

* Discovery Provider Host − We leave manually. It will need to run.

* color Windows system(WCS) - Manually. Devices will need it, they will launch it.

* Security Center - Follows Windows Security. She annoys me with her notifications. So turn it off or not, the choice is yours.

* Windows Update - On the one hand, it's a useful feature. It closes holes in the system, updates drivers, but on the other hand, it actively uses the Internet, memory resources, and if you turn off the computer during the update, the OS may crash. So it's up to you to choose what is more important, security or speed.

* encrypted file system(EFS) - For file security. Better to leave it as is manually.

That's all. In this article, I described the services that can be disabled in windows 10, as well as what is best left for the normal operation of the system. I checked it myself, everything works for me. If you have any other information, write, I will add it, it will help many people.