Is it possible to increase the memory of an iPad? Freeing up RAM on iPhone and iPad

Year after year, the most popular iPhone model was the one with the smallest amount of memory. Now Apple iPhone 5 16 Gb is the most popular model on the market in Russia, this conclusion can be made by looking at the offers in Yandex.Market. After a few months of using the phone, users have the question “how to increase memory in iPhone?” There are quite a few tips written on the Internet about how to remove applications that eat up memory and reinstall them, clear the cache and get rid of unnecessary messages. We bring to your attention a hardware solution to increase iPhone memory. The story of how we managed to replace the NAND memory chip in the iPhone 3GS with a more capacious one.

What happens when an iPhone falls on a hard surface? The glass breaks, the case breaks, or, worst of all, the microcircuits come off the motherboard. Got in for repairs iPhone 3GS 8 Gb PCT. The previous owner dropped the device on a tiled floor, after which the device rebooted, but did not reach working condition. The first thing they tried to do was simply reflash it. But that was not the case, during the firmware process a status bar appeared, but was not filled in. The firmware simply could not install on the phone, and iTunes gave: error 1600. Moving the motherboard into a known-good case did no good. It became clear that the problem lay in motherboard.

Upon closer inspection, it turned out that around the memory chip NAND Flash a perimeter crack in the compound. This means that the chip is partially or completely detached from the motherboard. Therefore, the device did not see it and could not start the firmware process. NAND Flash is a large chip, the largest in size on the motherboard. Therefore, removing it and reballing it, rolling the balls under the chip and installing it back is quite risky. If the largest microcircuit could come off the device, then what can we say about the smaller microcircuits? Will they come off the board during the heating process, or will new microcracks appear? During further inspection, no other damage was revealed, and a decision was made to remove the memory chip. We won’t go into the details of the technology for removing BGA chips on a compound, we’ll just tell you about the result.

The chip is half torn off from the board, 2 pads on the motherboard and one on the chip itself are torn off. In the photo under the tweezers one contact is missing. Inspection of the torn pads on the motherboard showed that they are simply fastening pads, that is, signals do not arrive at them. Naturally, there is no point in putting her in her place after a reball.

The solution is simple - remove the chip from a dead board or order it from China. It's good that there is a donor available. There was only one problem. The native memory was made by Toshiba, and the donor memory was made by Samsung, and of various memory sizes. The question arose about an equipment conflict after installation, but in practice it did not arise. After installing the new NAND chip, the phone successfully turned on recovery mode and flashed it through iTunes in standard mode. After activation The device has 13.6 GB of memory available, 2 Gb is occupied by iOS. The repair procedure was completed positively, which means that on any iPhone you can increase the memory capacity using this method. However, it should be noted that the process is very complicated from a technical point of view and is associated with a high risk of complete loss of the device’s functionality.

If you did not buy an iPhone with the maximum configuration and began to feel a lack of memory, then our service can solve this problem by replacing the memory chip itself with a chip with a larger capacity.

How it works?

It’s worth noting right away that this is a complex procedure that requires careful BGA soldering. You also need to make sure that the new microcircuit is perceived by the rest of the device and works adequately. This process is called firmware. The final task is reinstallation current version iOS.

This procedure needs to be performed if the old memory chip has burned out, gotten wet, or started to work incorrectly - simply put, it’s faulty. Or if you do not have enough current memory capacity of your device.

Memory capacity for different iPhones

The following volumes can be set:

• for iPhone 4 and iPhone 5c – up to 32gb.
• For iPhone 4s/5/5s – up to 64 GB.
• For iPhone 6/6 plus, 6S/6S plus – up to 128 gb.
• For iPhone 7 and 7 plus – up to 256 GB.

It is immediately worth noting that we are installing original chips, which are released on Apple factories. If you have the maximum amount of memory, increasing it is impossible. We also do not install chips of 8 GB and below, since there is no demand for them. In other cases, replacing the microcircuit will not take longer than one day.

What will happen to the phone information after replacing the chip?

Before the procedure, our specialists do backup copy data stored on the device, after which the information is reset to new drive. The exception is programs and games.

How much does it cost to change the memory chip on an iPhone and what are the guarantees?

First, the device is diagnosed, after which you receive information about the state of the current drive. This procedure is absolutely free. Next, you select the storage volume you are interested in, after which our specialists perform this delicate operation. The price varies from 5,000 to 9,000 rubles, but it includes not only work, but also the cost of a new memory chip. Our service center also provides a 3 year warranty.

In the end, you will receive a fixed iPhone with the amount of memory you need. This procedure makes it possible not to spend money on buying a new phone, but simply improve the old one. Our clients are always satisfied with working with us, so the feedback about our work is only positive.

There can never be too much memory - all mobile device users know this. Previously, two or three gigabytes were enough for people, but today some people lack volumes of 32-64 GB. For owners of devices in the operating room Android system It’s simpler - most gadgets have slots for memory cards. By installing a high-capacity card, you can significantly increase the amount of memory for storing data. How to increase memory on iPhone?

Hardware memory expansion

Owners iPhone smartphones 4s, 5s and 6s (and older models) have to deal with limited memory in their gadgets. Apple experts decided that users do not need support microSD cards, so we won’t find any slots for installing them here - it is believed that this volume is enough for people. What should those who don’t have enough built-in memory do?

There is a way out - you need to buy an iPhone with 32, 64, 128 or 256 GB of memory, but this can lead to serious costs. We will offer you a more economical option for increasing memory - purchase external hard drive that you can connect to via Wi-Fi. If you think that such devices are very rare, then you are mistaken, since today they are presented in many retail networks and in online stores.

For example, after spending 10 thousand rubles, you will receive a WD My Passport Wireless 1 Tb wireless drive - this amount of memory is enough for any purpose. The battery built into the drive will last for 5-6 hours, and in standby mode it will last for 20 hours. The battery is built-in, so you can’t change it yourself. The drive is connected to the iPhone via Wi-Fi. The device features high read/write speeds, allowing you to store huge amounts of data.

Featured Wireless HDD presented in two versions - 1 or 2 Tb. Any mobile device can work with it. It also has a built-in card reader for micro-SD memory cards

Inexpensive wireless wireless hard disks Seagate Wireless with a capacity of 500 GB. Advantages of this model:

• Neat body;
• Two-year warranty;
• Range of action – up to 45 meters;
• Light weight - only 281 grams.

Having purchased this disk, you can increase the memory on your iPhone up to 500 GB - quite a respectable amount for storing music, photos, movies and other files.

Software memory expansion

Is it possible to increase memory on iPhone in other ways? If we talk about hardware methods, then there are no such methods, so we will go the other way - we will try to increase memory using cloud services. The most popular cloud services are Dropbox and Yandex.Disk. Let's look at them in more detail. The Dropbox service provides its users with 2 GB of disk space. This is not very much, but you shouldn’t be upset - the basic volume is easily expanded to 16 GB by inviting friends.

In order to invite a friend, you need to send him a referral link. In return you will receive an additional 500 MB of memory. It’s not hard to guess that with the help of certain tricks you can “squeeze” out of this service the maximum space for storing your data. If 16 Gb is not enough for you, you can choose paid subscription. It offers users 1TB of storage space for $9.99. Payment in rubles is carried out according to the current dollar exchange rate.

This way you can get a decent amount of memory for little money. If you don't want to make monthly payments, save up some money and buy a wireless hard drive. The Yandex.Disk service is interesting because it immediately offers its users 10 GB of free disk space - an excellent add-on to the basic memory. To obtain additional volume, three tariff plans are offered at once:

• 10 GB – 30 rub./month or 300 rub./year;
• 100 GB – 80 rub./month or 800 rub./year;
• 1 TB – 200 rub./month or 2000 rub./year.

Prices are very flexible, so you can always choose the amount of memory to suit your needs. Payment is made using bank card or through Yandex.Money.

Cloud storage is accessed using special applications installed on iPhone - you can download them on the official websites of these services.

Advantages of cloud services over hard drives:

• No need to carry an additional gadget with you - which means an additional 300 grams of weight;
• There is no need to be afraid of breaking or losing the disk - data is accessed via the Internet;
• Ability to work on any device – Dropbox and Yandex.Disk are available from smartphones, tablets and computers.

As for the disadvantages, they are as follows - subscription fee with large amounts of memory, the need for unlimited Internet.

Smartphones and tablets are ideal for watching videos, storing music and photos. It is not surprising that when these devices are actively used, the memory does not last long. But if the internal flash drive is mostly portable gadgets on Android it can be expanded using micro SDHC cards, but owners of Apple devices do not have this option.

Of course, it is not difficult to purchase an iPad or iPhone with the maximum configuration. But, firstly, it will cost more. Moreover, it is not so easy for a beginner to estimate how much memory is really needed. Usually understanding comes during operation. Secondly, even the maximum volume is not a panacea for those who intend to store a large multimedia collection in the device’s memory.

There is only one way out - use an external drive or cloud services. Their main advantage is convenience. Rather than copying music or a movie from your computer to your device’s memory every time, or transferring photos from iPad to iPhone and vice versa, it’s easier to place the necessary albums and videos on external storage. As a result necessary files will always be at hand. In just a couple of months of using Dropbox in conjunction with your iPad, you will forever forget about situations where you have to remember for a long time which device has a recently downloaded clip or photos that you want to show to your friends.

How to expand the memory of iPhone and iPad

Method 1. External storage with Wi-Fi

The easiest way to solve the shortage problem free memory for iPad/iPhone – purchase a drive with a Wi-Fi connection, writes. A regular external HDD with a USB interface will not work, since iOS devices do not have a corresponding connector. And it’s inconvenient to work with a tablet with a wire sticking out of it.

Wireless drives are connected via Wi-Fi. In this case, an application is installed in the iPad/iPhone memory, through which navigation is carried out. file system, file synchronization, as well as searching and working with data. The built-in battery ensures the operation of the drive in mobile conditions. For example, on the go, you can watch movies stored in the drive’s memory on the tablet screen, while the disc itself will be in your backpack or bag.

Wireless drives are a relatively new type of device, so there are only a few models on sale yet. One of them has a capacity of 500 GB, supporting the 802.11n standard. The drive is available in a white casing, which harmonizes perfectly with Apple gadgets. Up to five devices can simultaneously connect to G-Connect in video playback mode. However, if we are talking about high-definition video, the number of devices is reduced to three. To recharge, the drive can be connected to an electrical outlet, a USB port, or a car adapter.

Wireless connection (via Wi-Fi) and traditional (USB 3.0) combines storage. It has a similar capacity, 500 GB, is compatible with iOS and Android devices, and the built-in battery will provide up to 5 hours battery life in video broadcast mode and more than a day in standby mode. The black gloss of the front surface of the case is complemented by silver sides.

Despite all the advantages of G-Connect and GoFlex Satellite, both devices are not very compact and light, because they are based on classic hard drives. Compared to them, he’s a real little boy. It is comparable in size to the iPhone 4, so it is convenient to carry not only in your bag, but also in your pocket. The fact is that the device is based on solid state drive. Although you can’t count on large amounts of memory here: Wi-Drive is available in versions with 16, 32 and 64 GB of capacity. The built-in battery is designed for 4 hours of autonomous video playback.

As you can see, wireless drives need regular charging, and the battery life usually lasts for several hours. In addition, the battery mobile device connected to the hard drive also discharges faster than when playing a movie from the built-in memory. And such drives are more expensive than conventional external HDDs of similar capacity.

Method 2. Cloud storage

If you use your iPad/iPhone most often at home, in the office, or in your favorite cafe with Wi-Fi, it makes sense to use cloud storage. One of the most popular is . On iOS devices, the service is available through an application that can be downloaded from App Store. Connection to the service is carried out via mobile networks 3G and via Wi-Fi without restrictions on the size of downloaded files (subject to using the client). If desired, you can synchronize all multimedia content, stored in the iPad/iPhone memory or select the necessary files for synchronization. Initially, the user is offered 2 GB of disk space, and by inviting friends to the service, you receive an additional 500 MB.

To work with the service you need to register Mailbox in Yandex and leave the appropriate request. After its approval, the user receives 3 GB of disk memory, and after installing the client on the PC, the volume will expand to 8 GB. An additional bonus is that Dr.Web antivirus automatically scans all files stored in the cloud. The principle of operation of Yandex.Disk is reminiscent of Dropbox - you just need to transfer a file to a folder, and it will immediately be available on all your devices.

The service provides 5 GB of disk space for free, and the application is compatible with all popular mobile platforms. One of the nice features is the ability to publish links to your files on social networks and send them via e-mail instead of the usual investments. Additionally, SugarSync uses address book iPad/iPhone, allowing you to quickly send a link to a file to any recipient.

The service also provides 5 GB. But it has an interesting feature - synchronizing an unlimited amount of data between computers without using the cloud. In addition, unlike Dropbox, here you can synchronize not just one folder, but several, and they can be located in any location on your computer.

Working with documents is a service priority. Provided different types documents, preview, assigning tags and working with versions. For example, you can track all changes and always return to previous version file.

The disk memory capacity is 7 GB. The prices for additional space are very attractive: if Dropbox has a paid tariff plan for 100 GB it will cost $199 per year, then for SkyDrive it’s only $50 per year. At the same time, the functionality is very similar. Clients available for iOS and Windows Phone, as well as for computers running Windows and Mac OS X.

The main advantage of cloud storage is that it provides access to information from any device from anywhere in the world. What could be simpler: upload a movie or music album to the cloud from home computer, and then play them from any device. But there are also disadvantages here. Firstly, in the free version, services have volume limitations. If you need more, you will have to pay. Another nuance is that the performance of the service depends entirely on the availability of an Internet connection, its speed and stability.

So, what to choose as storage – cloud or external hard disk? Choose both if possible. Each media type is adapted for its own purposes. Cloud services will be completely useless on trips and business trips, especially to the outback, where points Wi-Fi access you can't even dream. But on an external hard drive you can download enough music and movies to last your entire vacation. But in Everyday life Carrying a hard drive with you is inconvenient. If you have Wi-Fi at home or in the office, you can place the most popular files and music in cloud storage, and, for example, in my case, a few gigabytes provided for free are enough.

iPod touch and its platform, namely iOS, distributes system memory in dynamic mode, allocating separate areas for background and main tasks. During this mode, the use of memory for tasks of inactive programs is temporarily stopped.

The nuances of RAM on iOS

For the most part, iOS does a great job of allocating RAM. This makes it possible to have access to those applications that are used more often and respond faster. operating system does not provide for the task of systematizing and recycling information waste in the form of objects that were not in demand by programs. Therefore, some applications may borrow a certain memory segment and refuse to release it in response to an OS request. It is logical that the performance of the gadget is catastrophically reduced.

Loyal cleaning of RAM

Typically, gadget users resort to rebooting when such a problem occurs. But there is another way to clear RAM in a more system-friendly way.

1. Unlock the gadget.
2. Press its power button and maintain the position until the "Power off" sign appears.
3. But instead of using this slider, press and hold the Home button (5-15 seconds) until the home screen appears.

This circuit is responsible for rebooting system application SpringBoard, which is responsible for the main screen. It completely frees memory from those processes that are inactive.

The use of such an algorithm prevents the removal of the task manager or applications. The task manager stores those applications that have been used recently and connections with this are “frozen” in standby mode.

Reason for using the presented algorithm

If open source software stopped giving feedback or react very slowly, then the indicated diagram will help solve the problem. If you clean RAM while applications are running, they will simply disappear.

Forcefully deleting applications from the task manager has the opposite effect than expected: battery life runs out faster, and not the other way around, as is commonly believed.

This method will be appreciated by owners of retro iPhone models containing less than 1 GB of RAM.