Replace in asus laptop with ssd. Replacing the HDD with an SSD on an ASUS laptop
Why replace the old hard drive to a modern SSD (solid state) device is a significant computer upgrade? It's very simple - increase the volume random access memory, replace the processor or install a new, faster graphics adapter and the overall system speed will increase - no doubt ... however, the difference will not always be noticeable to the naked eye, except for some individual cases, such as games, for example.
But replace HDD on an SSD and… oh, miracle! Your slow computer will suddenly become a speed demon. An operating system that used to boot (slowly and painfully) within a minute now starts up in the blink of an eye. And operations such as copying and moving files take a few seconds, and even a software mastodon Adobe Photoshop literally flying!
The reason, of course, is that SSD technology is significantly more modern than the classic magnetic platter hard drives that have been around for over half a century. That's not to say that SSDs don't have drawbacks; the two most serious of them are still very high prices per gigabyte of capacity and a limited (comparatively) lifetime.
What is an SSD?
In practice, this is an array of non-volatile flash memory chips, designed so that the operating system identifies it as a device for writing information (in other words, a "hard drive").
Purely technical features solid-state devices are not as important. What matters is the fact that, due to their special design, they have a number of significant advantages over traditional hard disk drives (HDDs), of which the most obvious is the significantly higher speed.
SSDs also have no moving parts, making them ideal for use in laptops and other modern mobile devices, as they are less vulnerable to damage that can be caused by physical impact.
Moreover, solid-state devices require significantly less power to operate compared to classic magnetic disks, which again makes them perfect choice for any laptop.
Against the background of all this, you are probably already wondering why all computer manufacturers have not massively switched to this class of disks and continue to rely on the good old HDD?
Bad news time - as SSD devices continue to be relatively new technology, the cost of their unit volume is still quite high. For example, a model with a capacity of 120 GB costs about 3,000 rubles. For the same price, you can buy a hard drive about 7-8 times larger.
SSD - Usage
It is because of these arguments outlined that it is currently most reasonable to bet on a combination of a solid state device and a classic hard drive, both from a practical and financial point of view.
However, in the case of laptops, this is not always possible, although today on the market you can find models that have a special compartment for a second hard drive. But if the laptop has optical drive, then it can also be replaced by an additional hard drive(or SSD).
If your laptop comes with a classic magnetic disk pre-installed, you can quite easily replace it with a fast and modern SSD. Note, however, that in this way, you will probably have to sacrifice capacity at the expense of speed, i.e. your laptop will run noticeably faster, but you'll have less storage space.
This, of course, is not a big problem and you can always transfer some of the files to an external hard drive so that you only use them when you need them.
One way or another, you should know that the SSD reveals its potential exactly when the operating system is installed on it. Its work includes constant access to the disk device (reading and writing), so the higher the speed of the disk, the faster it will execute the commands given to it.
Choose right
Today, the SSD market offers a solid variety of models. Of course, not all of them are created equal - some are faster than others, some are more reliable, and all have different capacities.
The principle that applies here is similar to the main criterion for choosing any type of storage device - you need to divide the cost of a disk by its volume to get a figure known as "price per gigabyte". The idea is to find the best balance from this point of view, but keep in mind something else - SSDs only superficially resemble hard drives, but in fact they use a completely different technology.
In this regard, they have one very specific feature - their speed is largely dependent on their volume. So a 60 GB drive, for example, is slower than a 128 GB drive, which is slower than a 256 GB model, and so on. However, even the slowest SSD remains several times faster than the fastest hard drive, so this shouldn't bother you too much.
Much more important is the so-called solid-state device form factor. If you are going to buy an SSD for a laptop, it is very important to know the size of the drive bay that your laptop is equipped with. Most modern laptops use 2.5-inch hard drives, but there are options with a 1.8-inch drive bay, so it's best to find out before you go shopping.
Preparing for the update
The first thing to do is decide how to deal with the information that is already stored on the hard drive. The easiest way is to copy it to another medium, for example, to an external hard drive. In addition, you can use one of cloud services for online storage, but depending on the amount of data and the speed of the Internet connection, the process of downloading files may take a long time.
Update
Replacing a hard drive is one of the easiest operations you can imagine. Chances of spoiling something are minimal. If you are unsure of your technical knowledge and skills, then it is best to contact professional help.
AT laptops hard the drive is usually located under a cover on the bottom of the device. Detailed information on this subject, which is often accompanied by illustrative illustrations or even videos, you can search on the website of the laptop manufacturer.
Place the machine with the lid down, remove the battery and unplug the laptop from the mains. After removing the drive bay cover, remove the hard drive, and then connect the SSD.
Also keep in mind that you should have an optical disc or other external media with a copy on hand. operating system. If you are a Microsoft OS user then use Windows 7, 8.x or 10 as these versions are optimized for SSD but the last two are much better optimized.
You probably know the installation process - it does not differ from Windows installation to a regular hard drive.
By the way, if you have a regular computer, or a laptop that allows you to connect two drives to it at the same time, that is, you have the ability to connect an SSD without removing the hard drive, then you don’t even have to reinstall the operating system - just transfer it from the HDD directly to SSD, for example, using or , which have an integrated automated HDD to SSD migration wizard.
When the SSD is connected and the operating system is installed / transferred to it, you will receive lightning fast fast system in which you hardly recognize your computer.
Have a great day!
An SSD or Solid state drive is a hard drive that uses NAND chips as a storage medium, and not magnetized platters, as in conventional HDDs (Hard Disk Drives). That is, it does not have any reading heads, spindle, etc. There are absolutely no mechanical components.An SSD is made up of several parts that are assembled and function well together. The first and most important part is the controller. It controls the operation of the drive and is a kind of "heart" of the device. The second part is a set of NAND flash memory, where all the recorded information is stored.
Since the controller controls absolutely all the processes of reading and writing to SSD drive, then the performance of the device directly depends on this part. Modern SSDs use controllers with 4 to 10 channels for parallel connection of memory chips. The more such channels, the higher the data recording speed will be.
The SSD also has its own cache memory. However, it is not used to increase the read speed, as is done with the HDD, but as a temporary data storage. To date, there are SSDs with 128, 256 and 512 MB of cache on board. What memory will be specifically used for the SSD depends on its volume. The larger the volume, the larger the cache, but the price will then be much higher.
What will replace HDD with SSD
If you replace today's obsolete HDD with a newer and more modern SSD, the laptop user will receive a significant reduction in time Windows boot. The increase in speed will be about 60% in relation to a conventional hard drive. All programs and applications will start working much faster. For example, Windows boots from an SSD in about 15 seconds after being turned on.The laptop will last much longer on battery power if it has an SSD installed instead of an HDD. In addition, a solid state drive (SSD), due to the lack of a mechanical component, is able to withstand much more mechanical overloads.
Replacing HDD with SSD
Since all modern SSDs are made in the 2.5-inch form factor, replacing a standard laptop HDD is not difficult, because it has the same dimensions. First of all, turn off the laptop and remove the battery from it. Thus, you completely de-energize the device.Now look carefully where the HDD is located. On all laptops, its location is usually indicated by a special icon. After determining the location, remove the screws and remove the cover. Usually, the HDD is additionally located in a special basket and is attached to it with screws, they should also be unscrewed.
Remove the HDD from a special basket, install an SSD instead, and repeat the entire procedure in reverse order. Tighten all screws, replace all covers. Try to carefully remember which screws are from where, so that there is no confusion. Replace the battery and Charger. Be sure to install on a solid state drive new Windows, no need to migrate, clone or copy the old system from the HDD. Since the old operating system was installed on the HDD, the services there are launched to work with this particular device. On an SSD, not only will these services not speed up anything, but they can also contribute to faster disk wear.
Now that the laptop is assembled, turn it on and press F2 several times to get into the BIOS. Need to produce special settings for SSD. Locate the Advanced/Sata Configuration section. Set the operating mode to AHCI. In the Boot Priorities section, put the first boot USB drive or CD / DVD-drive, depending on what you are going to install Windows from. Save the settings by pressing F10, restart the laptop and proceed with the further installation of the system. Don't forget when choosing system disk specify the new SSD.
Every day more and more users are thinking about the question: how is the HDD in a laptop replaced with an SSD? This topic is especially relevant now: the hard disk, as in mobile computer outlives his.
To change or not to change? That is the question
There has been a discussion for many years whether the hard drive will be superseded by solid state drives or not. Power users value SSDs for speed and reliability. However, any medal has two sides, so it should be noted that the reactivity of the drive is very expensive.
The high cost of SSD for the most part and does not allow it to enter widespread use. Many owners of PCs and laptops, whose activities require the best performance, still renounce the HDD.
Pros and cons of SSD and HDD
The fact is that HDD has a number of disadvantages in comparison with SSD:
As a rule, it is because of them that many decide to replace, and one cannot ignore the advantages hard drives before solid state drives:
- Volume. On the this moment ordinary users are available from 320 GB to 10 TB. And the same SSD in ordinary stores can be found with a maximum of 2TB. We are not talking about drives for industrial or server equipment, but only about those that can be bought at the nearest computer market.
- Price. She is much lower. If we compare the cost of a popular hard drive with a volume of 2 TB with an SSD of the same capacity, it turns out that a solid state drive is 16 times more expensive than an HDD.
- With an SSD, it is almost impossible to recover deleted data due to the storage method. The maximum that can be done is to take the drive to the laboratory, where the necessary equipment will be.
Based on the foregoing, we can conclude if the speed and security of data is more important than their volume. Do you value low power consumption? Feel free to upgrade to an SSD.
What HDD is used in the laptop?
At the moment, laptops use hard drives form factor 2.5 inches. This means that inside there are “pancakes” of exactly this diameter. Some MacBooks have 1.8 ″ hard drives installed, but this is a separate issue, and we will not talk about them.
Each disk has a set of characteristics, such as:
- manufacturer;
- size: the amount of data to fit, usually in GB;
- buffer memory: fast memory or cash;
- rotation speed: the number of revolutions per minute made by the spindle;
- connection interface: connector that connects the drive to the board.
The HDD price depends on the set of these characteristics and their quality. The most common hard drive option at the time of this writing has:
- connection interface - SATA III;
- volume - 2 TB;
- - 5400 rpm;
- buffer memory - 32 MB.
What SSD can be installed instead of a hard drive?
The main difference between a solid state drive and an HDD is that data is written non-mechanically. Simply put, information is recorded on microchips. This results in high and low noise levels.
Such drives have 4 common form factors:
- PCI-E AIC (add-in-card);
- M.2 2280;
- mSATA;
- 2.5 in.
In the context of this article, which is devoted to the question of how to replace the HDD in a laptop with an SSD, all attention will be paid to the latest format drives, i.e. 2.5 inches. They with HDD have the same shape and SATA III connection interface. A similar view allows you to remove the drive and install an SSD in its place, screwing it to the same slide and closing it with the same cover.
mSata form factor SSD
Some laptops also support mSata. They have on motherboard there is a special III and two places for screws to secure the drive. Such SSDs can be used both as independent storage devices, and paired with depends on the design of the laptop.
In many Lenovo models, such an SSD acts as an additional medium (in the role of a cache). There are laptops in which mSata is installed in pair with the hard disk and is used as a system partition, that is, nothing is installed on it except for the operating system. Thanks to this solution, OS loading is accelerated, and the amount of data storage remains quite large, since information is written to disk.
SSD form factor 2.5″
To successfully replace the HDD with an SSD, you need to choose the right drive. At the moment, we managed to decide that it should be 2.5 inches and connected via SATA III. It is also worth paying attention to the thickness of the SSD, since for hard drives it ranges from 5 to 9.5 mm. If you buy an SSD that is too thick, the disk cover in the laptop may not close.
Next is a matter of taste. For home use 100-300 GB is considered sufficient. According to Tom Hardware, the best SSD for users is recognized at its affordable price of less than $ 100, it has excellent characteristics. If you are an inexperienced user, just look for something similar in the description and you will not lose.
Replacing an HDD with an SSD in a laptop
The process of changing a hard drive to an SSD is the same as installing a new hard drive.
The first thing to do if the old hard works is to copy information from it to another medium. Important data must be transferred to the cloud, to a USB flash drive or removable disk.
You can buy a case for HDD 2.5, install an old hard one in it and use it later as a mobile storage medium.
Replacement process
First you need to remove the battery. If it is non-removable, turn off the computer, remove the cover, and remove the battery connector from the motherboard.
- Loosen the screws that hold the disc cover and remove it.
- Remove the screws holding the hard drive sled.
- Pull the sled away from the connector to disconnect the HDD and remove it from the case.
- Loosen the screws securing the drive to the sled and remove it.
- Take the drive, install it in the sled in the same way as the hard drive was, and tighten the screws.
- Lower the SSD with the sled into the case and slide it into the slot to connect the drive.
- Screw the sled fasteners into the housing.
- Close the cover and tighten the screws.
- Connect the battery in the same way as disconnected, and close the cover if necessary.
- Turn on the laptop and check the performance of the SSD.
The minimum check will be to go into the BIOS or UEFI and see how the drive is determined. In most laptop models, this can be done by pressing the DEL or F2 key (Enter on some) immediately after switching on.
If the drive is operational and installed correctly, the information section will show its name and serial number. Additionally, you can run tests using the utility and check the rest, for example, the write speed.
The first thing to do is to copy the information. This is written above. The principle of operation for all computers in this regard is the same.
1. Disconnect the battery from the HP laptop. If the battery is removable, like this model, then you can do it simply:
- unlock the battery lock;
- pull the second latch;
- remove the battery from the socket.
2. Use a Phillips screwdriver to remove the screws that secure the hard drive cover to the chassis. In most models, it is small, about ½ of the entire back surface. Remove the cover, you may need to use a little force, as it can be secured with additional latches from the inside.
3. Loosen the screws that secure the hard drive carrier. There can be 2 or 4 of them. Move the hard from the connector to disable it.
4. Pry up the mount and remove the screws. If the hard drive is disconnected from the connector, this will be easy.
5. Loosen the screws that hold the HDD in the sled. Usually they are located on one and the other end of 2 pieces.
6. Install the SSD in the sled instead of the hard drive and tighten the screws on both sides.
7. Install the drive bracket with the drive into the chassis and slide it into the slot. Screw the slide screws back.
8. Close the housing cover, install the screws in the same order in which they were removed.
9. Connect the battery, that is, install it until a characteristic click. Slide the battery lock back into position.
10. Turn on the laptop and check that the SSD is defined in the system, you can perform additional testing.
Thus, the HDD in the laptop is replaced with an SSD. In the vast majority of models, this work is performed in the same way. The differences usually lie in the way the battery is disassembled and disconnected.
In this section, we will consider options for upgrading a hard drive to an SSD drive in Acer laptops. For clarity, an example will be given a model in which the battery is built-in, and almost complete analysis is required.
First of all, we still copy important data. Here the amount of information was small, so the transfer was made to a USB flash drive. We turn off the laptop and proceed to the replacement.
1. You need to remove the back cover of the case. To do this, remove all the screws from the back.
2. Remove the back, gently prying it around the perimeter. If the cover does not come off on either side, stop and check if all the screws are removed.
3. Disconnect the battery, to do this, remove the cable from the connector by gently pulling it towards you. Do not break the plug, otherwise you will have to completely change the battery.
4. In this model, the hard drive is not fixed in the sled, but simply inserted into the connector on the board between the chassis mounts. In order to produce HDD replacement on an SSD in a laptop, just take it out old disk by pulling from the connector. Then put the drive in its place.
5. Connect the battery back. Make sure the connector is straight and not damaged.
6. Replace the housing cover and tighten all screws. Make sure that the back does not pinch the wires.
7. Turn on the laptop, check the performance of the solid state drive in any way. If the computer does not respond to the power button, you will have to disassemble it again to check the battery.
In this way, the HDD in the laptop is replaced with an SSD for some models manufacturer Acer. You can rely on this instruction if you have to update other computers with a built-in battery.
Replacing HDD with SSD in Lenovo laptop
There is no big difference from the previous two options here. It can be noted that replacing the disk with an SSD drive in this option combined the two previous ones. This Lenovo model has a removable battery, but the HDD mount is located under back corps. There is no separate lid.
Following the main principle, you need to transfer the necessary data to another place or prepare an HDD-case to mount your old disk into it. This time we will not copy anything, we will insert the hard drive into Case and start using it as a portable “flash drive”.
1. First you need to disconnect the battery. The battery in this model is removable, so you need to remove the latch and remove the battery.
2. Unscrew all the screws in turn, which are located at the bottom. Be sure to check if your model has extra screws on the side.
3. Carefully remove the cover, snapping off each fastener one by one. If the case does not give in, check if all the screws have been removed.
4. Remove the screw that secures the hard drive carrier. In this example, there is only one. Lift up the HDD brackets and remove it from the laptop.
5. Use a screwdriver to remove the screws that hold the sled to the hard. In this model, the mounts have a shielded foil that protects the disk controller from shorting to the case.
6. Install the new SSD into the HDD bracket and screw it back into place.
7. Close the laptop with the bottom of the case, carefully snapping all the fasteners. Tighten the screws in the same order and connect the battery.
8. Turn on the laptop and test the drive in BIOS or some utility, for example, Victoria.
Ways to change the HDD to SSD in a laptop can be listed endlessly. The fact is that each model has its own principle of disassembly. Therefore, if you are not qualified enough and do not have experience in this matter, it is recommended to turn to professionals.
Replacing the hard drive with a solid state drive will increase the performance of your laptop by an order of magnitude. However, be sure to take into account the parameters of the processor and the amount of RAM. If you have a very weak CPU installed and no more than 2 GB of RAM, then the system will slow down anyway, even with an SSD.
Price your computer adequately, make only the necessary changes to it, and it will serve faithfully until you buy a new one.
I'll show you how to change the HDD hard drive to a high-speed SSD drive. Bought an SSD samsung disk 850 Evo 250 GB. and installed it on my laptop. Then I installed Windows and all programs on a new SSD drive.
I bought my Samsung 850 SSD EVO 120 GB SATA III SSD on AliExpress . At first I wanted to order such a Samsung 750 SSD EVO 120 GB SATA III (it is 120 GB and cheaper), but in the end I ordered 250 GB, although I could have done with 120 GB. The Samsung 850 EVO SSD arrived after about 12 days (the fastest product that came from AliExpress).
The parcel is well packed and sealed with styrofoam. Inside the box is plastic, and in it is an SSD drive.
Here are the specifications for this SSD drive. My reading speed tests, write at the bottom of the page.
1. Copy all the information you need from your disk
If you, like me, have only one place for a hard drive in a laptop, then first copy all the information from your hard drive to yourself external drive or on another computer. Or buy. So that you can then connect your removed HDD via USB and download everything you need from it to your new SSD drive.
Here is a visual video of this adapter.
2. Remove the hard drive and install the SSD
Turn off the laptop, disconnect the laptop from all wires, turn it over and remove the laptop battery. Now on back cover laptop, find the inscription HDD - this is the place where your hard drive is installed. I have on Samsung laptop NP-R560 is on the bottom left. The hard drive is covered with a cover with two screws.
We unscrew these two screws covering the laptop hard drive.
Remove the cover covering the hard drive. There should be arrows on it showing in which direction you need to pull to move the cover.
Here is my laptop hard drive. It has an aluminum cover to better dissipate heat and has a pull tab to make it easier to take it off. Simply grasp this tab and pull to the left to disconnect the hard drive from the connector.
Done, the hard drive is disconnected from the laptop and connectors. Pick it up and set it aside.
This is what a laptop looks like without a disk.
Now insert the SSD drive in place of the HDD drive.
Carefully insert it in place of the old HDD. I also put the aluminum plate from the old HDD onto the new SSD.
Close the hard drive cover.
Tighten the cover screws.
Ready. Now we turn the laptop over, insert all the wires into it, put the battery back and turn on the laptop.
3. Install Windows on a new SSD
There is nothing on the new SSD drive and there is no OS (Windows) either, so now you need to install Windows on it. You will get this error when trying to boot from a new SSD drive that does not yet have a Windows operating system.
Partition table invalid or corrupted. Press any key to continue…
You need to insert your bootable flash drive and boot from it.
If you don't have a bootable flash drive yet, it's time to make one.
Here is a video on how to set up the BIOS to install Windows from a bootable flash drive.
Now that there is bootable flash drive and loading occurs from it, then we install Windows on a new SSD. We select our SSD, it will be marked as "Unallocated space on disk 0" and click "Next" and install Windows.
Copy will start Windows files, then prepare for installation, install components, install updates, finish. The computer will restart several times. After the first reboot, you can remove the bootable USB flash drive.
If you have never installed Windows through the BIOS, then you will see a video on this topic.
After installing Windows on a new SSD drive, change the boot priority in the BIOS to first Windows bootloader searched on the SSD drive. Although if everything is loaded and working, then you can not change anything already. I will go into the BIOS, Boot - Boot Device priority.
And with the F5 or F6 key I will move the SSD drive to the very top so that it is first searched for boot sector on the SSD drive, and then on the other drives, if it was not found on the SSD.
4. Comparing the speed of SSD with HDD and USB disks
Using CrystalDiskMark 3, I measured the write and read speed of my HDD before removing it and replacing it with an SSD. The read speed from it was about 100 MB / sec. for sequential reading and writing.
When you may need to replace a hard drive and how to do it yourself. Replacing hdd hard drive with ssd solid state drive.120 r. RUB
Even the strongest thing can break at any moment. This is true for the hard drive as well. The hard drive may fail, or it may not suit the memory capacity.
The cost of the service is 120 R.
A task worth entrusting to professionals! We will fulfill it with a guarantee and in the shortest possible time!
Regardless of why you decide to replace the hard drive, you need to understand that replacing a hard drive is not the same as installing other PC parts - everything is much more complicated here. The operating system is located on the hard disk important files and programs.
And if personal data can be easily transferred from one hard drive to another, then everything is more complicated with the OS and service files.
Therefore, before replacing the hard drive, you need to Windows tools postpone important information from the old device to the new one. This is done through the "Backup and Restore" section in the Control Panel. You need the item "Create a system image". 
You select the disk where you save the image and archive it, and when you install a new disk, you restore the system. 
How to replace a hard drive
Before you change the hard drive, of course, you need to buy a new one. You need to check that the interface of the new disk is suitable for your computer. It is best to change the old drive to a new one with the same controller interface, size and power connector. 
If you cannot choose a drive that is similar to the previous one, you need to carefully compare the characteristics and choose a device that will fit in all respects in place of the old drive.
Hard disk can be with interface SATA controller or PATA. SATA comes in three flavors, so you need to determine which interface is right for you. In addition, a hard drive can be of different physical sizes. 
Before replacing the hard drive, you need to ground yourself so as not to damage computer components. This problem is solved with the help of an antistatic bracelet, or you need to constantly touch the PC case. 
Next, the replacement of the hard drive is carried out as follows:
- Unscrewing the computer case
- The hard drive is disconnected from all cables
- The disk itself is in the case - you need to unscrew the mounts and remove the old disk from the case.
- We put a new one in place of the old disk, fix it with bolts and connect all the cables back.
An SSD is a solid state drive. This component has a higher speed than the HDD, but the price is much higher and the capacity is lower.
If HDDs can now have a capacity of up to a terabyte, SSDs will not be able to reach such figures anytime soon. In addition, an SSD drive can be rewritten no more than 10,000 times, while for HDD disk this figure is 1,000,000 times.
There are many ways to install an SSD drive in a PC:
As you can see, there are many nuances that need to be considered before replacing the HDD. Much depends on the model of the drive that you decide to install instead of the old drive. In addition, you have to carefully choose the size of the disk and the place under it, so that there are no problems in the future.
